advertisement
▼
Scroll to page 2
of 90
RL9*8 Digital Series RL939 Digital Series SL980 Digital Series English Contents Dual .............................................................................................26 Balance ......................................................................................26 Bass, Treble ..............................................................................26 Voice Enhancement ..............................................................26 Dynamic Bass Boost ..............................................................26 Stable Sound® .........................................................................26 Dynamic Range Control ......................................................26 Audio Level Offset .................................................................27 TV Speakers On/Off ...............................................................27 Headphone Settings .............................................................27 Audio Description .................................................................27 Widescreen viewing .......................................................................28 Picture controls ................................................................................30 Picture Mode ...........................................................................30 Picture preferences ...............................................................30 Reset ...........................................................................................30 ColourMaster ...........................................................................30 Base Colour Adjustment .....................................................31 Colour Temperature .............................................................31 Auto Brightness Sensor .......................................................31 Active Backlight Control ......................................................31 Black/White Level ..................................................................31 MPEG NR – Noise Reduction ..............................................31 DNR – Digital Noise Reduction .........................................32 Resolution + .............................................................................32 Cinema Mode ..........................................................................32 Resetting the advanced picture settings ......................32 Expert Picture Settings ........................................................32 Automatic Format (Widescreen) ......................................34 4:3 Stretch ................................................................................34 Blue Screen ..............................................................................34 Picture Position ......................................................................35 Picture still ................................................................................35 HDMI Information Display ..................................................35 Wireless LAN Information .............................................................36 Setting up the Network .................................................................37 Wireless Setup ........................................................................37 Advanced Network Setup ..................................................39 DNS Setup ................................................................................40 Network Connection Test ...................................................41 Using the software keyboard ............................................41 Network Device Setup ...................................................................42 Apps Control Profile .............................................................42 TV Power On Control (Active Standby) ..........................42 Media Renderer Setup .........................................................43 Device Name Setup ..............................................................43 USB HDD Record Function ...........................................................43 Setting up the USB HDD for recording ..........................44 To record DTV programmes (One Touch Recording) ....................................................44 How to set recordings via the Programme Guide .....44 To check, edit or delete scheduling information .......46 To view a recorded programme .......................................46 Operations from the Library screen ................................47 Recording Setup ....................................................................48 Scheduling priority ...............................................................49 Using Toshiba Places ......................................................................50 Using Web Browser ...............................................................51 INSTALLING YOUR TV Safety Precautions ............................................................................. 4 Installation and important information ..................................... 5 The remote control ........................................................................... 7 Inserting batteries and effective range ............................ 7 The remote control ........................................................................... 8 Inserting batteries and effective range ............................ 8 CONNECTING YOUR TV Connecting external equipment .................................................. 9 Connecting an HDMI® device ......................................................10 To connect an HDMI device ...............................................10 HDMI’s ARC (Audio Return Channel) feature ...............10 Connecting an HDMI CEC Control compatible device .......11 Connecting a computer ................................................................12 To connect a PC to the HDMI terminal ...........................12 To connect a PC to the RGB/PC terminal .......................12 Connecting a home network ......................................................13 To connect the TV to a home network - Wired ...........13 To connect the TV to a home network with an internet connection - Wireless ......................................13 To connect the TV to the PC with Intel® Wireless Display ......................................................13 Controls and input connections .................................................14 Switching on ............................................................................14 Using the menu system .......................................................14 Using the TV controls and connections .........................14 MENU structure ................................................................................15 SETTING UP YOUR TV Startup Application .........................................................................16 Quick Setup ..............................................................................16 Ant/Cable (if available) .........................................................18 Auto Tuning .............................................................................19 ATV Manual Tuning .........................................................................20 Tuning ........................................................................................20 Skip ..............................................................................................21 Sorting positions ....................................................................22 DTV Manual Tuning ........................................................................22 Manual Tuning ........................................................................22 Manual Tuning for DVB-C ...................................................23 DTV Settings ......................................................................................23 Channels ...................................................................................23 Standby Channel Update ....................................................24 Location setting ......................................................................24 Analogue switch-off ............................................................24 CONTROLS AND FEATURES General controls ...............................................................................25 Quick Menu ..............................................................................25 Selecting channels ................................................................25 The Time Display – analogue only .................................25 Stereo and Bilingual transmissions .................................25 Sound controls .................................................................................26 Volume controls and sound mute ...................................26 2 TEXT SERVICES Text services ......................................................................................78 Selecting modes ....................................................................78 Text information ....................................................................78 Navigating pages using Auto ............................................78 Navigating pages using LIST .............................................78 Control buttons ......................................................................79 PROBLEM SOLVING Questions and Answers ...............................................................80 INFORMATION Information ........................................................................................83 License Information ........................................................................87 Specifications and accessories ...................................................89 During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance: If your TV is connected to the internet, firmware will be automatically made available. If your TV is not connected to the internet, you can download the latest version of firmware from www.toshiba-om.net/firmware.php *Some features are limited due to local legislation and may not be available in all countries. 3 English Software Upgrade and Licences ................................................73 Searching for New Software ..............................................73 Network Upgrade ..................................................................73 Software Licences ..................................................................73 System Information and Reset TV .............................................73 System Information ..............................................................73 Reset TV .....................................................................................73 PC Settings .........................................................................................74 Horizontal and Vertical Position .......................................74 Clock Phase ..............................................................................74 Sampling Clock .......................................................................74 Reset ...........................................................................................74 Input selection and AV connections ........................................75 Input selection ........................................................................75 Labeling video input sources ............................................75 Digital Audio Output ............................................................76 Using HDMI CEC Control ...............................................................76 Enable HDMI CEC Control ...................................................76 TV Auto Power ........................................................................76 Auto Standby ..........................................................................76 Amplifier Control ...................................................................77 Initial Speaker Setting ..........................................................77 HDMI CEC Control input source selection ....................77 HDMI CEC Control one touch play ..................................77 HDMI CEC Control system standby .................................77 Using Skype ............................................................................51 Using Hybrid TV Standard (if available) ...................................56 Using Intel® Wireless Display .......................................................56 Intel® Wireless Display Device Name ..............................57 PC List .........................................................................................57 Using the Media Player ..................................................................57 Basic operation .......................................................................58 Viewing photo files (on a DLNA CERTIFIED™ Server or USB device) .......59 Viewing movie files (on a DLNA CERTIFIED™ Server or USB device) .......61 Playing music files (on a DLNA CERTIFIED™ Server or USB device) .......63 Other features ...................................................................................64 Panel Lock .................................................................................64 The timers ...........................................................................................65 Programme Timers – digital only ...................................65 On Timer ....................................................................................65 Sleep Timer ..............................................................................66 Energy Saving Settings ..................................................................66 Automatic Power Down ......................................................66 No Signal Power Down ........................................................66 Digital on-screen information .....................................................67 Information ..............................................................................67 Using EPG (Electronic Programme Guide) ..............................68 Using Broadcast Guide ........................................................68 Genre selection/searching ..................................................68 Using MediaGuide .................................................................68 MediaGuide screen ...............................................................68 Primary Navigation menu ...................................................69 Digital settings – parental control ............................................70 Parental PIN Setup .................................................................70 Parental Setup .........................................................................70 Network Lock ..........................................................................70 Digital settings – Channel Options ..........................................71 Selecting favourite channels .............................................71 Favourite Channel List .........................................................71 Skip channels ...........................................................................71 Locking channels ...................................................................71 Digital settings – other settings ................................................72 Subtitles .....................................................................................72 Audio languages ....................................................................72 Common Interface ................................................................72 English INSTALLING YOUR TV DO be careful with glass panels or stands on equipment. Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products, and some points may not apply to the goods you have just purchased. DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS. THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE. Do not DO NOT obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment. Air Circulation Leave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided. For wall mounted positions at least 2.5cm gap was retained from the wall and the 10cm was kept clear around the perimeter of the TV. DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment. DO NOT place hot objects or naked flame sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires. Heat Damage Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5°C min. and 35°C max. WARNING: To prevent the spread of fire, keep candles or other open flames away from this product at all times. DO NOT use makeshift stands and NEVER fix legs with Mains Supply wood screws. The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance. IF IN DOUBT, PLEASE CONSULT A COMPETENT ELECTRICIAN. DO NOT leave equipment switched on when it is unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, and make sure your family knows how to do this. Special arrangements may need to be made for people with disabilities. DO NOT continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer. Do DO read the operating instructions before you DO NOT push/pull CI CAM at a tilt to prevent attempt to use the equipment. breakdown of COMMON INTERFACE. DO ensure that all electrical connections (including WARNING: Excessive sound pressure from earphones or headphones can cause hearing loss. the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections. ABOVE ALL - NEVER let anyone, especially children, push or hit the screen and cabinet back, or push anything into holes, slots or any other openings in the case. These actions will damage screen or internal parts. NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry. DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. See page 5. 4 INSTALLING YOUR TV English Installation and important information Where to install Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV. In order to prevent injury and maintain stability of this apparatus, secure the TV to the level surface using the strap if fitted, or to a wall using a sturdy tie to the P clips provided. Otherwise secure the TV on the level surface using the supplied mounting screw. The LCD display panels are manufactured using an extremely high level of precision technology; however, sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction. Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case. Fixing strap Fixing strap Sturdy tie (as short as possible) Stand clip ‘P’ Clip Screw (supplied) Stand style is dependent on model Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal. Studies indicate that plastics may weaken and crack over time from the combination effects of chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could result in serious injury and/or permanent damage to TV and TV pedestal. When using a Wall Bracket Removing the Pedestal Stand: Please use a wall bracket appropriate for the size and weight of the LCD TV. • Two people are required for installation. • To install a wall-mount from another manufacturer, use the SPACERS (supplied). 1 Unplug and remove any cables and/or other component connectors from the rear of the TV. 2 Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. 3 Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket. 4 Make sure to place the spacers supplied between the bracket and the back of the TV. 5 Always use the screws supplied or recommended by the wall mount manufacturer. 1 Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel. 2 Remove the four screws. Four screws 3 Once you have removed all four screws holding the pedestal stand in place, remove the pedestal stand from the TV by sliding the pedestal stand away from the TV. Screw Wall bracket Spacer (supplied) 28–32mm TV back panel M6 (32RL and 32SL) M8 (40RL and 40SL) Place four spacers (supplied). CAUTION: The diameter and length of the screws differ depending on wall bracket model. Use of screws other than the screws specified may result in internal damage to the TV set or cause it to fall, etc. 5 English INSTALLING YOUR TV Please take note The digital reception function of this television is only effective in the countries listed in the “Country” section of the “System Setup” menu. Depending on country/area, some of this television's functions may not be available. Reception of future additional or modified services can not be guaranteed with this television. If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on-screen menus, etc. are left on the television screen for any length of time, they could become conspicuous. It is always advisable to reduce both the brightness and contrast settings. Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of other size modes (e.g.: Super Live) will prevent permanent retention. EXCLUSION CLAUSE Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by: i) Fire; ii) Earthquake; iii) Accidental damage; iv) Intentional misuse of the product; v) Use of the product in improper conditions; vi) Loss and/or damage caused to the product whilst in the possession of a third party; vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual; viii) Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment; Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product. When Using a USB Hard Drive ( HDD ) • The recording function has been designed for private use and entertainment in your home environment. Please note that any commercial use of the recording function could lead to copyright infringement of authors’ rights. Toshiba asks you to respect the intellectual property rights of third parties. • Toshiba shall not be liable for damages of any kind whatsoever (breakdown of the recording device, modification or loss of the recorded content, etc.) resulting from malfunction, operating failure or incorrect operation due to combining with another connected device. • If you connect a USB HDD that has been used with a PC or another TV, only programmes which are recorded using this TV can be playback. • Before recording to a device connected to the TV, make a test recording and check the recording performance. • Switch the TV to standby before you disconnect the USB HDD. Not doing so may result in loss of the recorded data or malfunction of the USB HDD. • Programmes that are prohibited from copying due to copyright protection cannot be recorded. • Toshiba shall not be liable for compensation or incidental damages of any kind whatsoever resulting from content that was not properly recorded on the recording device or that was modified or lost. • Please note that recording on the USB HDD is no longer playable after the TV’s main-board is exchanged during service. 6 INSTALLING YOUR TV English The remote control 15 To mute the TV sound 16 To access Quick Menu CT-90420 (for RL series) 2 3 6 7 17 On-screen Menus 18 To display the digital on-screen Programme Guide 1 4 5 8 19 When using menus, the arrows move the cursor on the screen up, down, left or right. Press OK to confirm your selection 20 To return to previous Menu 21 To exit menus and applications 22 Colour buttons: Text and interactive service control buttons 23 When in TV mode: D Analogue time display 9 10 11 14 12 13 16 17 15 18 19 20 22 21 When using Programme Guide: Z –24 hours z +24 hours CC –1 page cc +1 page 24 To record DTV programmes 23 24 25 When in Text mode: A To reveal concealed text B To hold a wanted page C To enlarge text display size D To select a page while viewing a normal picture During Playback: c To PLAY v To STOP W/w To PAUSE/STEP Z To SKIP-BACK CC To REWIND cc To FAST FORWARD z To SKIP-FORWARD 25 Picture still 26 To call up text services 27 26 27 Digital Subtitles or Analogue TEXT Subtitle pages if available Inserting batteries and effective range 1 For On/Standby mode 2 To select external input sources 3 Selectable Picture 4 Widescreen viewing 5 s Stereo/bilingual transmissions 6 To access the “TOSHIBA PLACES” Top Page When network is not connected, an error message will be displayed. 7 To select TV Mode (DTV Ant/DTV Cable/ATV) 8 To access the analogue or digital Channel List 9 Number buttons Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the proper way. Suitable battery types for this remote are AAA, IEC R03 1.5V. Do not combine a used, old battery with a new one or mix battery types. Remove exhausted batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 88 of this manual. Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like. 10 Switch the Audio Description On/Off The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced, the batteries may need replacing. 11 To return to previous channel 12 To alter the TV volume 13 To change programme positions To change TEXT pages 14 To display on-screen information To access the index page in Text mode 7 English INSTALLING YOUR TV The remote control 16 To exit menus 17 Colour buttons: Text and interactive service control buttons 18 Number buttons 19 To display on-screen information To access the index page in Text mode 20 To return to previous programme position CT-90382 (for SL series) 1 2 4 5 3 6 8 7 10 11 9 12 13 15 21 When in TV mode: D Analogue time display 14 16 When using Programme Guide: Z –24 hours z +24 hours CC –1 page cc +1 page 17 18 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 19 20 21 22 24 26 27 29 23 25 28 30 22 23 24 25 26 27 28 29 30 When in Text mode: A To reveal concealed text B To hold a wanted page C To enlarge text display size D To select a page while viewing a normal picture During Playback: c To PLAY v To STOP W/w To PAUSE/STEP Z To SKIP-BACK CC To REWIND cc To FAST FORWARD z To SKIP-FORWARD To record DTV programmes To call up text services Picture still To access Media Player Menu Selectable Picture preferences Widescreen viewing s Stereo/bilingual transmissions To access More Information Menu Digital Subtitles or Analogue TEXT Subtitle pages if available Inserting batteries and effective range For On/Standby mode To select external input sources To select TV Mode (DTV Ant/DTV Cable/ATV) To access Quick Menu To access the “TOSHIBA PLACES” Top Page When network is not connected, an error message will be displayed. To access the analogue or digital Channel List To alter the TV volume Switch the Audio Description On/Off To mute the TV sound To change programme positions To change TEXT pages On-screen Menus To display the digital on-screen Programme Guide When using menus, the arrows move the cursor on the screen up, down, left or right Press OK to confirm your selection To return to previous Menu Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the proper way. Suitable battery types for this remote are AAA, IEC R03 1.5V. Do not combine a used, old battery with a new one or mix battery types. Remove exhausted batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 88 of this manual. Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like. The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced, the batteries may need replacing. 8 CONNECTING YOUR TV English Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. ILLUSTRATION SHOWS 40RL938. HDMI 3 INPUT HEADPHONE jack Power cord HDMI 1/2 INPUTS DIGITAL AUDIO OUTPUT (OPTICAL) USB 1 port Media Player/USB HDD connection port RGB/PC INPUT SCART (EXT 1) LAN port COMPONENT VIDEO/AUDIO INPUT VIDEO/AUDIO INPUT (Y/L/R) (EXT 2) Aerial Cable Media Recorder Aerial cables:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HDMI® (High-Definition Multimedia Interface) is for use with electrical equipment with digital audio and video output. It is designed for best performance with 1080i and 1080p highdefinition video signals but will also accept and display VGA, 480i, 480p, 576i, 576p and 720p signals. PC format signals will also be displayed. Connect the aerial to the socket on the rear of the television. If you use a decoder and/or a media recorder, it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television. SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connect the media recorder IN/OUT socket to the television. Connect the decoder TV socket to the television. Before running Auto Tuning, put your decoder and media recorder to Standby. NOTE: Although this television is able to connect to HDMI equipment, it is possible that some equipment may not operate correctly. LAN port is used to connect the TV to your home network. This TV can play digital content stored on a DLNA CERTIFIED™ product with server function. A wide variety of external equipment can be connected to the back of the television; therefore, the relevant owner’s manuals for all additional equipment must be referred to for exact instructions. If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press o to select between TV, EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3 or PC. When the external input mode is selected while viewing DTV mode, the SCART socket does not output video/audio signals. The RCA sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals. When connecting the VIDEO/AUDIO devices, connect those cables to Y/L/R sockets. The Digital Audio Output socket enables the connection of a suitable surround sound system. NOTE: This output is always active. 9 English CONNECTING YOUR TV Connecting an HDMI® device The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant consumer electronic devices (such as a set-top box or DVD player with HDMI output). For acceptable video signal formats, see page 84. HDMI’s ARC (Audio Return Channel) feature This feature enables the audio signal of the TV to be sent to the AV amplifier via the HDMI cable. It will not be necessary to connect a cable from the audio output of the TV to the audio input of the AV amplifier to reproduce the audio received from the tuner of the TV through the AV amplifier. the back of your television NOTE: Supported Audio format: Linear PCM, Dolby Digital (AC-3), sampling rate 32/44.1/48kHz. HDMI cable To connect an HDMI device Connect an HDMI cable (type A connector) to the HDMI terminal. For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ). • If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this model. • HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration). AV amplifier that supports ARC the back of your television HDMI cable HDMI device To view the HDMI device video, press the o button to select HDMI 1, HDMI 2 or HDMI 3 mode. 10 CONNECTING YOUR TV You can control the basic functions of connected audio/video devices using the television’s remote control if you connect an HDMI CEC compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 76–77. the back of your television AV amplifier Playback device Playback device For the setup shown above, you will need three HDMI cables. NOTE: • If several devices are connected, the HDMI CEC Control feature may not operate properly. • For proper operation, it is recommended that you use HDMI cables with the HDMI Logo ( ). • This function is available when one PC and one AV amplifier are connected separately. However, it may not operate properly if the PC is connected via the AV amplifier. Before controlling the device(s): • After completing the above connections, set the HDMI CEC Control Setup menu as you desire (see page 76). • The connected devices must also be set. For details, see the operation manual for each device. • The HDMI CEC Control feature uses CEC technology as regulated by the HDMI standard. • This feature is limited to models incorporating Toshiba’s HDMI CEC Control. However, Toshiba is not liable for those operations. Refer to individual instruction manuals for compatibility information. 11 English Connecting an HDMI CEC Control compatible device English CONNECTING YOUR TV Connecting a computer With either an HDMI or an RGB/PC connection, you can watch your computer’s display on the television. To connect a PC to the RGB/PC terminal When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable. the back of your television To connect a PC to the HDMI terminal Computer When connecting a PC to the HDMI terminal on the television, use an HDMI cable (type A connector). Mini D-sub 15 pin connector the side of your television RGB PC cable (not supplied) Computer Conversion adaptor if required (not supplied) HDMI cable If connecting a PC with DVI terminal, use an HDMI-to-DVI adaptor cable. the side of your television Computer HDMI-to-DVI adaptor cable For acceptable PC and video signal formats, see page 84. NOTE: • The edges of the images may be hidden. • If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly. To use a PC, set the monitor output resolution on the PC before connecting it to the television. For acceptable PC signal formats, see page 83. To display the optimum picture, use the PC setting feature (see page 74). NOTE: • Some PC models cannot be connected to this television. • An adaptor is not needed for computers with a compatible mini D-sub15-pin terminal. • Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes. • A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to scaling of the picture by the set, it is not a malfunction. • When PC input mode is selected, some of the television’s features will be unavailable e.g. Colour System in the System Setup menu. • Some PC models may output unique signals that the television may be unable to detect (see page 83). • If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly. 12 CONNECTING YOUR TV The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DLNA CERTIFIED™ server and play/display them on your TV. NOTE: • If you connect to a shared network outside your home, it is advisable to use a router. Always use DLNA CERTIFIED™ products in private network environments. Connect this TV to the same router as other DLNA CERTIFIED™ products (server). • If you use a hub or switch to connect the TV to your home network, you may not be able to use the automatic setup and will have to manually set up the network address. See page 39. • If you use a router with built-in DHCP functionality, use the automatic setup. Manual setup may not work. • If you connect the TV and PC directly, use a crossover LAN cable. • Please consult your PC manufacturer about details of PC settings. • Wireless appliances may interfere with Intel® Wireless Display. To connect the TV to a home network Wired the back of your television Modem (if available) [1] Router with Hub [2] To connect the TV to a home network with an internet connection - Wireless Please refer to “Wireless Setup” section on page 37. Access point (AP) Wireless LAN router Modem Computer NOTE: • If this device is going to be operated in the frequency range of 5.15 GHz to 5.35 GHz, it is restricted to indoor use. • If this device is going to be operated for 802.11 b/g/n function in the frequency range of 2.454 GHz to 2.4835 GHz in France, it is restricted to indoor use. • A general authorization is required for using this device outdoors or in public places in Italy. • This device is NOT ALLOWED to be used in the geographical area within a radius of 20km from the centre of Ny-Alesund in Norway. • Make the wireless LAN appropriate security setting at the time of wireless LAN use to prevent the illegal use, spoofing and interception of communications. • Don't connect wireless LAN to a outside network directly. Apply the wireless LAN access point with router function or broadband router. Make the router appropriate security setting to prevent the illegal use. Refer to the manual of router for a security setting. [2] [3] Server PC To connect the TV to the PC with Intel® Wireless Display Cable or Phone jack [2] PC with Intel® Wireless Display Intel® WiDi [1] Coaxial or telephone cable (depending on your modem type) [2] Standard LAN cable [3] Do NOT connect a phone jack directly to the TV’s LAN port. 13 English Connecting a home network English CONNECTING YOUR TV Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. ILLUSTRATION SHOWS 40RL938. USB 1 port Media Player/Wireless LAN adaptor ready for a home network COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). Contact a service provider. The software updating of CI Plus CAM may be automatically executed. At this time, your Recording/Reminder programming will be canceled. Ambient Light Sensor Control panel ORANGE LED – Programme timer set (digital only) RED LED – Recording USB 2 port Media Player/USB HDD connection port RED LED – Standby GREEN LED – Power on ORANGE LED – Active Standby (Apps) Switching on If the RED LED is not lit, check that the mains plug is connected to the power supply and press 1 on the remote control; it may take a few moments. The GREEN LED will be lit. To put the television into Standby, press 1 on the remote control. To view the television, press 1 again. The picture may take a few seconds to appear. For energy saving: We recommend that you use the television with the factory settings. The factory settings are for energy saving. Unplugging the mains plug will cut energy use to zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday. Reducing the brightness of the screen will reduce energy use. Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills. NOTE: Putting the television into standby mode will reduce energy consumption, but will still draw some power. Using the menu system Press MENU on the remote control to display the menu. The menu appears as a list of five topics. As each symbol is selected by pressing C or c on the remote control, its respective options will appear above. NOTE: The same menu is displayed in DTV (Digital TV) and ATV (Analogue TV) modes; however, where some items are not available in a mode, they will appear grayed out. To use the option, press B and b on the remote control to move up and down and press C or c to select your desired setting. Using the TV controls and connections • To turn on or off the TV, press !. • To alter the volume, press + or – . + and – buttons operate as volume up/down as default. • To alter the programme position, press p / o once and press u or U. • To select an external input, press and hold p / o until the Inputs window appears, and then press u or U to select the appropriate input source. The Media Player feature provides access to photo, movie and music files stored on a USB storage device that is connected via the USB 1 or USB 2 port or on a network device. The USB port has to be used with an USB HDD (not supplied) in order to record/playback TV programmes. Please always refer to the owner’s manual of the equipment to be connected for full details. NOTE: • The USB socket has limited functionality and Toshiba can take no responsibility for damage to other connected equipment. • Interactive video games that involve shooting a “gun” at an on-screen target may not work with this TV. 14 CONNECTING YOUR TV English MENU structure To open the main menu (illustration below) , press MENU on the remote control. Guide Genre Search Setup TV Programmes 1st Layer Library Media Player Toshiba Place Function Press MENU. Programme Timers 2nd Layer Press C c / B. Press C c. 3rd Layer Press OK. Press BbC c. TV Programmes Guide Genre Search Programme Timers Library Jump to Programme Guide (EPG) Jump to Genre Search Jump to Programme Timers Jump to Library USB Media Player Network Media Player USB Media Player Menu Network Media Player Menu Media Player Toshiba Places Jump to Toshiba Places NOTE: This menu item is subject to change without notice. Function On Timer Sleep Timer On Timer Menu Sleep Timer Menu Picture Sound Preferences System Setup Picture Menu Sound Menu Preferences Menu System Setup Menu Setup 15 English SETTING UP YOUR TV h Startup Application Before switching on the TV make sure that your aerial is connected and any decoder / media recorder, if applicable is connected and in standby. Press OK, and the Network Type screen will appear. Press C or c to select Wireless. Connection Type Select a connection method. Quick Setup a b c Wired • When you select Wired (LAN cable connection), skip to step 13. Press the 1 button. Toshiba logo will appear. and after that, The Menu Language screen will appear. This screen will appear the first time that the television is switched on and each time Reset TV is selected. i There are 3 methods for Wireless Setup: Press B b C c to select the menu language and press OK. • Easy Setup (WPS) - If the AP supports WPS, this method can be used. WPS is an industry standard designed to make connection of wireless LAN equipment and security setup easy. WPS will automatically configure all wireless settings. Highlight Country and press C or c to select. The television is now set to tune the stations for your country. Quick Setup Country Germany Primary Subtitle Language German Secondary Subtitle Language Turkish Primary Audio Language German Secondary Audio Language English NOTE: WEP encryption may not be able to configured by easy setup. • Assisted Setup - follow step 11. Input the Security Key only. • Manual Setup, skip to step 12. Input the all settings. Wireless Setup NOTE: • The following display menus will differ slightly according to the country you selected. • If there is not a country that you want to select in the list, select Others. d Select the wireless connection method. Easy Setup NOTE: EXIT is available during settings. Press OK, and the Location screen will appear. j Location To use the TV for displaying in a store showroom, please select [Store]. [Home] mode is recommended for normal use. f Press C or c to select Home or Store. For normal home use, select Home. PBC - Following the on-screen instructions, push the appropriate button on your AP. When a window reporting that the setup is complete appears, press OK. Press OK, and the AutoView screen will appear, press C or c to select Yes or No. AutoView AutoView mode automatically adjusts picture settings to suit ambient light conditions. Do you wish to enable AutoView mode? PIN - When the PIN code window appears, enter the displayed PIN into your AP, and then press Next to continue the PIN Setup. When a message displays to report that the setup is complete, press OK. No g In step 9, when you select Easy Setup; Press OK, and the Easy Setup screen will appear. Press C or c to select PBC (Push Button Configuration) or PIN (Personal Identification Number). Press b to highlight Start Scan and press OK. Home e Press OK, and the Wireless Setup screen will appear. Press C or c to select the Wireless Setup type. Press OK, and the Network Setup screen will appear. Press C or c to select Yes or No. To cancel searching for the AP: Network Setup In order to enjoy online video, music, games, news and more provided by Toshiba Places* (Toshiba’s portal to internet services) an active internet connection is required. Press BACK while searching for the AP. A message will appear, and then press C or c to select Yes and press OK. *Availability is dependant on country selection. Do you want to setup a network connection? Yes • When you select No, skip to step 16. 16 SETTING UP YOUR TV Press B or b to select Security Key and press OK. Input the Security Key by using the Software Keyboard (page 41). To save your setting, press the BLUE button. This item is grayed out when Encryption is None. In step 9, when you select Assisted Setup; Press OK, and the Assisted Setup screen will appear. Press B or b to select the desired AP and press OK. NOTE: Check the MAC address on the label of the AP or in the manual, and select your AP. When Encryption is WEP, Key ID setting is available. Press B or b to select Key ID and press C or c to select 1(default), 2, 3 or 4. Press B or b to select Security Key and press OK. The Software Keyboard window will appear (page 41). Input the Security Key by using the Software Keyboard. To save your setting, press the BLUE button. NOTE: • The Security Key must adhere to these conditions: - TKIP/AES: 8-63 ASCII or 64 Hex characters - WEP: 5 or 13 ASCII or 10 or 26 Hex characters • There is only one key ID to set for WEP encryption. Press B or b to select Done and press OK. When the message “Wireless configuration is complete.” appears on screen, press OK. NOTE: Settings are not saved if BACK is pressed before Done is selected. m When the DHCP function of the router connected with this TV is On, you can set Auto Setup to On or Off. (This should usually be set to On.) When the DHCP function of the router is Off, set Auto Setup to Off, and set the IP Address DNS address(es) manually. Press B or b to highlight Done and press OK. NOTE: • If Network Name is not displayed, see Manual Setup below to set Network Name before pressing Done. • If BACK is pressed before Done is selected, settings are not saved. Advanced Network Setup When the message “Wireless configuration is complete.” appears on screen, press OK. The screen will skip to step 13. l IP Address Setup In step 9, when you select Manual Setup; On IP Address XXX . XXX . XXX . XXX Subnet Mask XXX . XXX . XXX . XXX Default Gateway XXX . XXX . XXX . XXX Auto Setup On Primary DNS Address XXX . XXX . XXX . XXX Secondary DNS Address XXX . XXX . XXX . XXX 00:11:22:33:44:55 MAC Address Next Press B or b to select Authentication and then press C or c to select Open System, Shared Key, WPAPSK or WPA2-PSK. NOTE: • Certain encryption types are only compatible with specific authentication types. - When Authentication is Open System, only WEP or None is compatible. - When Authentication is Shared Key, only WEP is compatible. - When Authentication is WPA-PSK or WPA2-PSK, only TKIP or AES is compatible. • When incompatible Authentication/Encryption pairings are detected, a warning message will be displayed, and no connection attempt will be made until the incompatibility is resolved. • There is only one key ID to set for WEP encryption. Auto Setup DNS Setup Press OK, and the Manual Setup screen will appear. Press B or b to select Network Name and press OK. The Software Keyboard window will appear (page 41). Input the Network Name by using the Software Keyboard. To save your setting, press the BLUE button. Press B or b to select Encryption, and then press C or c to select None, WEP, TKIP or AES. The Advanced Network Setup screen will appear. You can view the fixed MAC address for the TV, if one is installed. Press B or b to select Next. n Press OK, and Network Connection Test will start. A message will appear to indicate if the connection was successful or if could not be completed. Network connection was completed successfully. OK NOTE: The result of Network Connection Test does not always guarantee the connection. To cancel the Network Connection Test: Press BACK while searching for the Internet connection. 17 English k English SETTING UP YOUR TV o Press OK. If your country supports Network Guide, The Guide Type screen will appear. TV Guide Selection s Press C or c to view the DTV (digital channel) or ATV (analogue channel) lists. T Use B or b to move through the list to select a channel, and then press OK to view. Electronic Program Guide accessed by the “GUIDE” key of your remote control: Select “MediaGuide” if you want to use the advanced rich media EPG provided through the network. In ATV mode, some areas may receive duplicate stations. There may not be a clear picture or the signal may be weak, so the station order can be changed using ATV Manual Tuning. *Your TV must be connected to the network. Select “Broadcast Guide” if you want to use the simple EPG provided by our local broadcast network, if any. Broadcast Guide REMEMBER: Press TV at any time to select between ATV and DTV modes. Press C or c to select Broadcast Guide or MediaGuide. NOTE: The time will be set automatically by transmission but can be advanced or decreased by using Local Time Setting in the DTV Settings screen. NOTE: If you select MediaGuide, it may take time to access the Guide screen depending on active channel numbers. p PLEASE NOTE Press OK. If the Ant/Cable screen appears, press B or b to select Antenna or Cable, and then press OK to check ( ). The Quick Setup menu can also be accessed at any time from the Setup / System Setup menu. Ant/Cable Ant/Cable (if available) Antenna Cable From this menu, you can set the RF input configuration. Next q r Select Next and press OK. The Auto Tuning start up screen will appear with the option to select between DTV and ATV, DTV or ATV if available. Use C or c to select the appropriate mode. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight System Setup icon and press OK. c Press b to select Ant/Cable and press C or c to select Antenna or Cable. Press B or b to highlight Start Scan, and then press OK. NOTE: When you attempt to change the Ant/Cable setting, a warning message will appear followed by PIN entry (if PIN has been set) and a prompt for Auto Tuning. The television will start to search for available DTV and/or ATV channels. The progress bar will indicate the scan status. d You must allow the television to complete the search. Auto Tuning - Antenna Progress DTV Tune ATV Tune Press B or b to select an item and press C or c to select your desired option. Found 3% When Ant/Cable is set to Cable, the following setting options will be provided in the Auto Tuning screen. 2 Waiting... Auto Tuning - Cable Channel: C7 Tuning Mode When the search is complete, the television will automatically select channel one. DTV and ATV Start Scan DTV The Auto Tuning screen will display the total number of services found. Operator Selection Scan Type 18 Others Quick Scan Start Frequency Auto End Frequency Auto Modulation Auto Symbol Rate Auto Network ID Auto SETTING UP YOUR TV Operator Selection: You can choose the Cable operator depending on the Country you set. DTV Scan Type: This item determines whether a Quick Scan or a Full Scan will be executed. The Quick Scan is a simplified version of the Full Scan that is designed to complete in less time. English With the exception of DTV Scan Type and DTV Modulation items, all of the following items will have 2 operating modes. The first is Auto where the values for each item are preset by the system. The second is an Input mode where you will be able to enter a single value in place of the pre-set value. If no channel is currently tuned and the Input state is chosen, a system default value will be shown. However, if a channel is currently tuned when the item is accessed, the value of the current channel will be displayed. Auto Tuning NOTE: As new services are broadcast, it will be necessary to re-tune the television in order to view them. Auto Tuning will completely re-tune the television and can be used to update the channel list. It is recommended that Auto Tuning is run periodically to ensure that all new services are added. All current channels and settings, i.e. locked channels, will be lost. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight System Setup icon and press OK. c Press B or b to select Auto Tuning and press OK. System Setup Menu Language DTV Start Frequency: Country This sets the frequency from which the scan will begin. Ant/Cable English Germany Auto Tuning DTV End Frequency: ATV Manual Tuning This sets the frequency at which the scan will end. DTV Manual Tuning DTV Settings DTV Modulation: You can choose from five QAM modulation settings. DTV Symbol Rate: Quick Setup d Press C or c to select Yes and press OK. Auto Tuning - Antenna This is the baud rate (KS/s) of the scan. Tuning Mode DTV Network ID: DTV and ATV Start Scan This is the Network ID to be utilized for the scan. This item is grayed out when DTV Scan Type is set to “Full Scan”. Press C or c to select DTV and ATV, DTV or ATV, if available, then highlight Start Scan and press OK to continue with the Auto Tuning. NOTE: If you have selected “Others” for the Country field in the System Setup menu, and selected a tuning mode other than “DTV” , choose the optimum ATV broadcasting system (B/G, I, D/K or L). The television will start to search for all available DTV and/or ATV services. You must allow the television to complete the search. When the search is complete, the Auto Tuning screen will display the services found. e 19 Press B or b to move through the list to select a channel and press OK to view. English SETTING UP YOUR TV a ATV Manual Tuning Tuning In the System Setup menu, press b to select ATV Manual Tuning and press OK. System Setup The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/decoder with a SCART lead or when you want to tune-in a station on another System. Menu Language Use C and c to move across the screen and select any of the ATV Manual Tuning options. Then use B or b to adjust the settings. ATV Manual Tuning English Country Germany Ant/Cable Auto Tuning DTV Manual Tuning DTV Settings Quick Setup ATV Manual Tuning b System 1 I A C 2 0 V C R Use B or b to select the desired position. We suggest Pos. 0 for a media recorder. ATV Manual Tuning Pos. Channel 1 2 3 4 5 6 7 8 1 2 3 4 9 Position The number to be pressed on the remote control to tune the channel. System Specific to certain areas. Colour System Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source. Skip Set Skip to On (8) or Off (() for the selected channel. See page 21. 5 Signal Class The channel classification. 6 Channel The channel number on which a station is being broadcast. 7 Search Search up and down for a signal. 8 Manual Fine Tuning Only used if interference/weak signal is experienced. See page 80. 9 Station Station identification. Use the B b and C c buttons to enter up to seven characters. 1 C2 2 3 S10 C7 4 S40 5 C22 6 C25 7 C28 8 C30 Station Different Channel numbers may be displayed. c d Press OK to select. If the channel chosen for the media recorder is set to skip, Skip should be removed before storing. Press c to select System and press B or b to change if required. ATV Manual Tuning System 1 I A C 2 0 e Then press c to select Search. f Press B or b to begin the search. The search symbol will flash. ATV Manual Tuning To allocate a position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film in the media recorder, press PLAY and manually tune. Search 1 20 I A C 2 0 SETTING UP YOUR TV h Each signal will show on the television. If it is not your media recorder, press B or b again to restart the search. When your media recorder signal is found, press c to move along to Station. Use B, b, C and c to put in the required characters, e.g. VCR. Skip To prevent certain channels from being viewed, positions can be skipped. a b ATV Manual Tuning Station 1 I A C 2 0 V C R i Press OK to save. j Repeat for each position you want to tune. k Press EXIT when you have finished. Select ATV Manual Tuning from the System Setup menu. Use B or b to highlight the position to be skipped and press OK to select. ATV Manual Tuning Pos. Channel PLEASE NOTE This television has direct channel entry if the channel numbers are known. Select the ATV Manual Tuning screen in Step 3. Enter the Position number, the System, then C for standard (terrestrial) channels or S for cable channels and the Channel number. Press OK to save. English g Station 1 C2 2 3 S10 C7 4 S40 ABC1 5 C22 ABC1 6 C25 7 C28 8 C30 c Press c to select Skip. d Use B or b to turn Skip on. Press OK. 8 on the screen indicates a skipped position. ATV Manual Tuning Skip: On 1 e I A C 2 0 Press BACK and repeat from Step 2 or press EXIT. Each position has to be individually selected. To turn Skip off, repeat the procedure for each position. Skipped positions cannot be selected by PU and Pu or by the controls on the television but can still be accessed by the number buttons on the remote control. 21 English SETTING UP YOUR TV DTV Manual Tuning Sorting positions Channels may be moved and saved to the position of your choice. a b NOTE: This feature varies depending on the Ant/Cable setting. Select ATV Manual Tuning from the System Setup menu. Manual Tuning With the list of channels showing, use B or b to highlight the channel you want to move and press c. ATV Manual Tuning Pos. Channel 2 3 S10 C7 4 S40 This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. a Station Select DTV Manual Tuning from the System Setup menu and press OK. DTV Manual Tuning - Antenna Signal Strength Quality ABC1 5 C22 1 Channel 6 C2 C25 7 C28 Bandwidth 8 C30 ABC1 WEAK AVERAGE STRONG GOOD 67 Frequency 842.0 MHz 8 MHz Start Scan c Use B or b to move through the list to your preferred position. As you do so, the other channels will move to make room. b d Press C to save your move. c Repeat as necessary and press EXIT. Enter the multiplex number using the number buttons or use C or c to adjust the number up or down. Highlight Start Scan and press OK. The television will automatically search for that multiplex. DTV Manual Tuning - Antenna 0 New Channels - Total 6 New Pos. Name 1 ABC ONE 2 ABC TWO 7 ABC THREE 40 ABC NEWS 24 ABCi 51 Type When the multiplex is found, any channels that are not currently in the channel list will be added and the channel information at the top of the screen will be updated. d 22 Repeat as necessary. Press EXIT to finish. SETTING UP YOUR TV DTV Settings When Ant/Cable is set to Cable, DTV Manual Tuning items are as follows: Channels Frequency: Input a specific frequency to be scanned Modulation: Choose from one of five QAM modulation options Symbol Rate: Input a specific baud rate (KS/s) to be used for the manual scan English Manual Tuning for DVB-C The channel order may be changed to suit your personal preference. a b Select DTV Settings from the System Setup menu and press OK. Select Channels and press OK. DTV Settings Channels Subtitle and Audio Parental PIN Setup Parental Control Local Time Setting c Standby Channel Update Off Dynamic Scan Off For your convenience, you can jump to specific places in the list by one of two methods. Channels Antenna TV Line No. Pos. 1/10 Name 1 ABC ONE 2 ABC TWO 7 ABC THREE 30 CABC Channel 40 ABC NEWS 24 51 ABCi 822 AA 823 AC Line Number Jump — Use the number buttons (0-9) to input the line number you want to select and press OK. It is also possible to change the Position number of a particular channel. Renumber — Press the RED button to renumber the highlighted channel. Edit the channel number using the number buttons and press OK. If the position number you input already exists, a confirmation window will appear. Pos. Name ABC ONE 23 English SETTING UP YOUR TV Move — Press the GREEN button to activate the Move feature. Press the B or b buttons to select the Analogue switch-off channel you wish to move and press OK to check. If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary. Once all desired channels have been checked, press the B or b buttons to place the focus at the position to which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move. This is a digital television which is integrated to allow the use of both digital and analogue services. However, during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services. Channels Antenna TV Line No. Pos. This ‘switch-off’ will happen in a number of phases, which will be advertised in your area well in advance. It is recommended that at each phase the television is re-tuned to ensure that existing and new digital services can be viewed without disruption. 1/10 Name 1 ABC ONE 2 ABC TWO 7 ABC THREE 30 CABC Channel 40 ABC NEWS 24 51 ABCi 822 AA 823 AC Position No. Sort — Press the YELLOW button. A confirmation window will appear. Press C or c to select Yes and press OK. Your existing channel order will be lost. Do you wish to continue? Yes Standby Channel Update If the Standby Channel Update is set to On, when the TV is in standby mode, Digital Tuning is automatically executed. a b Select DTV Settings from the System Setup menu and press OK. Press b to select Standby Channel Update and press C or c to select On. Location setting You can select either Home or Store mode. Home is recommended for normal home use. Select Store when using the television for displaying in a shop, etc. a Select Location from the System Setup menu. b Press C or c to select Home or Store. 24 CONTROLS AND FEATURES Selecting channels To select a channel, use the numbered buttons on the remote control. Quick Menu Quick Menu helps you access some options quickly, such as Picture Mode, Picture Size, More Information, Sleep Timer etc. Channels can also be selected using PU and Pu. To display on-screen information such as channel, input mode or stereo/mono signal, press . Press again to cancel. Press QUICK to display the Quick Menu and use B or b to select the option. The Time Display – analogue only The time display facility allows the current (text service) time to be seen on the television screen. Quick Menu Picture Mode AutoView Picture Size Super Live Press D whilst watching a normal television broadcast to see the time display from the broadcaster. It will remain on screen for about 5 seconds. More Information Channel Options 00:00 Sleep Timer NOTE: This display may not be available in some cases. HDMI CEC Device Control Speakers TV Speakers Headphone Level Stereo and Bilingual transmissions 50 NOTE: Quick Menu items are different depending on the current mode. For DTV programmes For stereo or dual mono broadcasts, press s and use C or c to select settings. Quick menu item example Mode When viewing a TV programme or pictures from the external input Quick menu item Mode Display Description Picture Mode See page 30. Picture Size See page 28. More Information See page 67. Channel Options See page 71. Pressing c Stereo Stereo S Left S Right Dual mono Dual 1 S Dual 2 S Dual Mono – Multichannel – Sleep Timer See page 66. HDMI CEC Device Control See page 76 For multi-audio track broadcasts, press s repeatedly to change the audio language (see “Audio languages” on page 72). Speakers See page 77. For ATV programmes Headphone Level See page 27. Intel® Wireless Display See page 56 If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time channels are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear. Wireless Information See page 38. Recording Information See page 67 When using EPG Genre Colour See page 68. USB Media Player (Photo Single View, Slide Show) Picture See page 30. Sound See page 26. Interval Time See page 59. Repeat See page 59. Background Music See page 60. Play List See page 60. Sleep Timer See page 66. Speakers See page 77. Headphone Level See page 27. Stereo… Press s to select Stereo or Mono. Bilingual… Bilingual transmissions are rare. If they are transmitted, the word Dual will be displayed. Choose the required programme number, and if the word Dual appears, press s to select Dual 1, Dual 2 or Mono. 25 English General controls English CONTROLS AND FEATURES Sound controls Voice Enhancement Voice Enhancement emphasises the frequency range of the speaker’s voice, making it easier to catch what they are saying. Volume controls and sound mute Volume Press 2+ or 2– to adjust the volume. Sound Mute Press once to turn the sound off and again to cancel. a In the Advanced Sound Settings menu, press B or b to select Voice Enhancement. b Press C or c to select On or Off. Dual Dynamic Bass Boost If a programme or film is being broadcast with a soundtrack in more than one language, the Dual feature allows selection between them. Dynamic Bass Boost enhances the depth of the sound on the TV speakers. The difference will only be noticeable on sound with strong bass. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Sound icon and press OK. c Press B or b to select Dual and press C or c to choose between Dual 1 or Dual 2. a In the Advanced Sound Settings menu, press B or b to select Dynamic Bass Boost. b Press C or c to select the desired bass expansion level (Low, High or Off). Stable Sound® Sound Dual Stable Sound reduces the volume level differences between channels. It automatically remains on the same volume level when you change channels. Dual 1 0 Balance Advanced Sound Settings Stable Sound Off Dynamic Range Control On a In the Sound menu, press B or b to select Stable Sound. b Press C or c to select On or Off. Audio Level Offset TV Speakers On Headphone Settings Dynamic Range Control Balance a In the Sound menu, press B or b to select Balance and press C or c to emphasize left or right speaker balance. Bass, Treble a In the Sound menu, press B or b to select Advanced Sound Settings and press OK. b Press B or b to select Bass or Treble. c Press C or c to change the setting. This feature allows control of audio compression for some digital TV programmes (MPEG-1 and MPEG-2 audio programmes are not supported). a In the Sound menu, press B or b to select Dynamic Range Control. b Press C or c to select On or Off. 26 CONTROLS AND FEATURES English Audio Level Offset Headphone Settings Sometimes there can be large changes in volume when switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an external input. Using the Audio Level Offset feature reduces these volume differences. This setting is used to set the sound output when headphones are connected. a b Speaker Link Set the volume level usually used when watching a DTV 5.1ch programme. Tune to a channel which is DTV 2ch, ATV or an external input. c In the Sound menu, press B or b to select Audio Level Offset and press OK. d Press B or b to select an option, and then press C or c to adjust the volume level. Audio Level Offset DTV 2ch -5 ATV 0 External Input 0 Sound is output (2 ± is available.) No sound Off Sound is output (Headphone level menu is available.) Sound is output (2 ± is available.) a In the Sound menu, press B or b to select Headphone Settings and press OK. b Press B or b to select Speaker Link and press C or c to select On or Off. c In the Sound menu, press B or b to select TV Speakers. b Press C or c to select Off. If you select Off, then highlight Headphone Level and use C or c to adjust the headphone sound. Headphone Settings Speaker Link Headphone Level On 50 Audio Description Audio Description is an additional narrative sound track for visually impaired individuals to understand and enjoy the story line more fully. The letters AD will be displayed in the channel banner when programmes contain AD content. TV Speakers On/Off a Speakers On NOTE: • The available item changes depending on the current input source. For example, while watching a DTV 2ch programme, only DTV 2ch is available and the other two items are grayed out in the menu. This allows you to easily adjust according to each condition. • When watching a DTV 5.1ch programme, this feature is not available. This feature allows you to turn the TV speakers off when connecting the audio system. Headphone a In the Sound menu, press B or b to select Audio Description and press OK. b Press B or b to select Audio Description and press C or c to select On. To turn on the built-in speakers: Audio Description Choose On in step 2. Audio Description Mixing Level On 50 The AD button on the Remote can also be used to toggle the Audio Description feature between On and Off. c 27 To adjust the level of the audio description sound to the main sound, highlight Mixing Level and press C or c. English CONTROLS AND FEATURES Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. WIDE 4:3 Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. Use this setting to view a true 4:3 broadcast. SUPER LIVE This setting will enlarge a 4:3 image to fit the screen by stretching the image horizontally and vertically, holding better proportions at the centre of the image. Some distortion may occur. CINEMA When watching ‘all sides panel format’ films/video tapes, this setting will eliminate or reduce the black bars at all sides of the screen by zooming in and selecting the image without distortion. SUBTITLE When subtitles are included on a letterbox format broadcast, this setting will raise the picture to ensure that all the text is displayed. SUBTITLE 14:9 Use this setting when watching a 14:9 broadcast. 28 CONTROLS AND FEATURES English NATIVE This setting will show the picture without overscan, i.e. WYSIWYG. PC NORMAL This setting will show the picture without overscan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. PC WIDE This setting will show the picture without overscan or side panels. This option is only available when watching a PC signal source via HDMI or PC terminal. Dot by Dot Press the “Dot by Dot” is a non-scaling display. Depending on the input signal format, the picture is displayed with side panels and/or bars at the top and bottom (e.g. VGA input source). button on the Remote to display the list of available widescreen formats. Press the button repeatedly to highlight the required format. The Quick Menu feature can also be used to select Picture Size. AV format Picture Size Wide PC format Picture Size PC Normal 4:3 PC Wide Super Live Dot by Dot Cinema Subtitle 14:9 Native Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws. 29 English CONTROLS AND FEATURES Picture controls Picture preferences You can customize current picture mode settings as desired. For example, while selecting “Dynamic”, if you change the following items, such as Backlight, Contrast, Brightness, Colour, Tint, Sharpness and the Advanced Picture Settings items, your new settings are saved for “Dynamic” picture mode. Most of the picture controls and functions are available in both digital and analogue modes. PLEASE NOTE: Features not available will be grayed out. Picture Mode a In the Picture menu, press B or b to select either Backlight, Contrast, Brightness, Colour, Tint or Sharpness and press OK. b Press C or c to adjust the settings. This television offers the choice of personalising the picture style. AutoView, Dynamic, Standard, Hollywood Night, Hollywood Day, Hollywood Pro, Store, Game and PC are preset options and affect many features/settings within the television. Reset NOTE: • Because the AutoView mode automatically adjusts picture settings based on ambient light conditions and input signal content, the Auto Brightness Sensor and Expert Mode is grayed out when it is selected. • Store mode is only available when Location is set to Store. • Game mode is available in external input mode (other than aerial input). When you select Game mode, suitable widescreen formats will be selected. • PC mode is available in RGB/PC input mode or HDMI input mode. a Press MENU / C c to highlight Setup icon. b Press B /C c to highlight Picture icon and press OK. c Press B or b to select Picture Mode. Picture Picture Mode This feature resets all picture settings to the factory settings except Picture Mode. a In the Picture menu, press B or b to select Reset and press OK. b A confirmation message will appear. Press C or c to select Yes and press OK. ColourMaster When ColourMaster is set to On, it allows the ‘Base Colour Adjustment’ feature to become available. a In the Picture menu, press B or b to select Advanced Picture Settings and press OK. b Press b to select ColourMaster. Standard Advanced Picture Settings Reset Backlight Contrast ColourMaster 0 Off Base Colour Adjustment 100 Brightness 0 Colour Temperature Colour 0 Auto Brightness Sensor Off Tint 0 Active Backlight Control Low Sharpness 0 Black/White Level Middle Noise Reduction d Press C or c to select the picture mode you prefer and press OK. NOTE: The picture mode you select affects the current input only. You can select a different picture mode for each input. Resolution+ c 30 On Press C or c to select On or Off and press OK. CONTROLS AND FEATURES Auto Brightness Sensor The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. When the Auto Brightness Sensor is activated, it will automatically optimise the backlighting levels to suit ambient light conditions. a In the Advanced Picture Settings menu, press B or b to select Base Colour Adjustment and press OK. a In the Advanced Picture Settings menu, press B or b to select Auto Brightness Sensor. b Press B or b to select an option and press c to move to the adjustment window. b Press C or c to select On or Off. Active Backlight Control Base Colour Adjustment Hue Saturation Brightness Red 0 0 0 Green 0 0 0 Blue 0 0 0 Yellow 0 0 0 Magenta 0 0 0 Cyan 0 0 0 Reset c a b Hue Saturation Brightness 0 0 -1 Colour Temperature Colour Temperature increases the “warmth” or “coolness” of the picture by increasing the red or blue tint. a In the Advanced Picture Settings menu, press B or b to select Colour Temperature and press OK. b Press B or b to select Colour Temperature and press C or c to select Cool, Natural or Warm to suit your preference. c Press B or b to select Red Level, Green Level or Blue Level and press C or c to adjust the level. Press C or c to select High, Low or Off. Low: To control the backlighting levels for dark scene Black/White Level Black/White Level increases the strength of dark areas of the picture to improve the definition. Press BACK to return to the previous menu. To return to the factory settings, select Reset and press OK. In the Advanced Picture Settings menu, press B or b to select Active Backlight Control. High: To control the backlighting levels depending on various scenes such as picture motion, bright scene or dark scene Press C or c to select Hue, Saturation or Brightness and press B or b to adjust the settings as required. Red d When the Active Backlight Control feature is activated, it will control the backlighting levels depending on various scenes such as picture motion, bright scene or dark scene. a In the Advanced Picture Settings menu, press B or b to select Black/White Level. b Press C or c to select High, Middle, Low or Off. MPEG NR – Noise Reduction When watching a DVD, the compression may cause some words or picture elements to become distorted or pixelated. Using the MPEG NR feature reduces this effect by smoothing out the edges. a In the Advanced Picture Settings menu, press B or b to select Noise Reduction and press OK. b Press b to select MPEG NR. Noise Reduction NOTE: To return the adjustments to the factory defaults, select Reset and press OK. c 31 MPEG NR Low DNR Auto Press C or c to select High, Middle, Low or Off to suit your preference. English Base Colour Adjustment English CONTROLS AND FEATURES DNR – Digital Noise Reduction Expert Picture Settings DNR allows you to “soften” the screen representation of a weak signal to reduce the noise effect. This feature is available when the Picture Mode option is Standard, Hollywood Day, Hollywood Night, and Hollywood Pro. a b Select DNR from the Noise Reduction menu. Press C or c to select Low, Middle, High, Auto or Off. The differences may not always be noticeable (for the best result use lower settings as picture quality can be lost if the setting is too high). Resolution + The Resolution+ feature allows you to adjust the clarity levels for your desired picture settings. Test Pattern When the test pattern is on screen, you can navigate in the Picture submenus and adjust picture settings without removing the image. When you move to a non-Picture menu, or close the menus, regular video will be restored. a In the Picture menu, press B or b to select Expert Picture Settings and press OK to display Expert Picture Settings menu. a In the Advanced Picture Settings menu, press B or b to select Resolution+ and press OK. b Press B or b to select Test Pattern. b Press C or c to select On. c Press C or c to select On. d Press EXIT to close. NOTE: • This feature may not work properly depending on the content. • Noise may appear in the picture depending on the device connected to the TV (e.g. a device with a specific enhancer function). Cinema Mode The frame rate of a movie film is generally 24 frames a second whereas the movie software such as DVD, etc. that you enjoy watching on television at home is 30 or 25 frames a second. The difference in frame rate may cause flickers while viewing the films on television; set the Cinema Mode to convert the signal to reproduce a smooth motion and picture quality. a b In the Advanced Picture Settings menu, press B or b to select Cinema Mode and press OK. Press C or c to select On. NOTE: When Picture Mode is set to Game or PC, this feature will be grayed out and automatically set to Off. Resetting the advanced picture settings b This feature individually enables or disables the red, green, and blue components of the picture to allow for more accurate adjustment of each colour. a In the Expert Picture Settings menu, press B or b to select RGB Filter and press OK. b Press B or b to select Red, Green or Blue to adjust. c Press C or c to select On. d Press B or b to select Colour or Tint and press C or c to adjust. e Press EXIT. NOTE: It is not possible to turn off all three colours simultaneously. Colour Decoding If you view DVDs with this TV, the Colour Decoding option may be set to ensure the colourimetry reproduction. In the Advanced Picture Settings menu, press B or b to select Reset. NOTE: The modes excluding Auto (BT601 and BT709) are to convert an irregular signal output from the DVD etc. with incorrect colour to the optimum state. If BT601 or BT709 is selected with a normal signal received, the colour may not be correctly displayed. This feature should normally be set to Auto. Press OK. a In the Expert Picture Settings menu, press B or b to select Colour Decoding. b Press C or c to select Auto, BT601 or BT709. This feature allows you to reset the current Advanced Picture Settings to the default values. a RGB Filter 32 CONTROLS AND FEATURES English White Balance-Window Display This feature displays a special Window Pattern to be used when adjusting white balance with a measuring device. a In the Expert Picture Settings menu, press B or b to select White Balance and press OK. b Press B or b to select Window Display and press C or c to select On. c Press EXIT to close. White Balance-Setting Type You can choose from two types of White Balance adjustment. a In the Expert Picture Settings menu, press B or b to select White Balance and press OK. b Press B or b to select Setting Type and press C or c to select 2P or 10P. White Balance-2P White Balance a Press b to select 2P White Balance. b Press B or b to select Red-Offset, Green-Offset, Blue-Offset, Red-Gain, Green-Gain, or Blue-Gain. c Press C or c to adjust. White Balance-10P White Balance a Press b to select 10P White Balance. b Press B or b to select IRE, Red, Green, or Blue. c Press C or c to adjust. NOTE: The adjustments made for Red / Green / Blue are stored separately for each IRE setting. (There are ten IRE settings from 10 to 100.) 33 English CONTROLS AND FEATURES Gamma Calibration Automatic Format (Widescreen) Toshiba has integrated picture calibration systems into its LCD televisions. Now you can enjoy the benefits of automatically calibrated gamma and white levels. In order to take advantage of these features the Toshiba colour analyzer TPA-1 is required. When this television receives a true Widescreen picture and Auto Format is On, it will automatically be displayed in Widescreen format irrespective of the television’s previous setting. a Press MENU / C c to highlight Setup icon. a In the Expert Picture Settings menu, press B or b to select Gamma Calibration and press OK. b Press B / C c to highlight Preferences icon and press OK. b Press B or b to select Apply Calibration and press C or c to select Enabled. c Press B or b to select Display Settings and press OK. c Press B or b to select Auto Gamma Calibration and press OK. d Press B or b to select Auto Format and press C or c to select On or Off. d e Connect the USB colour analyzer to the USB 1 or USB 2 port. Display Settings Input the target value and place the USB colour analyzer over the square on screen. Auto Format On 4:3 Stretch Off Picture Position PC Settings Auto Gamma Calibration Please input the target value and place the USB colour analyser over the square. 4:3 Stretch When 4:3 Stretch is activated, the size switching system changes 4:3 programmes into full screen picture. Target Colour Temperature Target Gamma x y 0.313 0.329 2.4 Start f Reset a In the Preferences menu, press B or b to select Display Settings and press OK. b Press B or b to select 4:3 Stretch and press C or c to select On or Off. Highlight Start and press OK. Blue Screen Auto Gamma Calibration will start. When Blue Screen is selected, the screen will turn blue and the sound will be muted on analogue channels and external input modes when no signal is received. Please wait until you see “Auto Gamma Calibration has been completed.” on screen. To return to factory setting NOTE: Some external input sounds may not be muted. a a In the Preferences menu, press B or b to select Blue Screen. b Press C or c to select On or Off. Highlight Reset and press OK. Resetting to the factory defaults a In the Expert Picture Settings menu, press B or b to select Reset and press OK. A confirmation screen appears. b Select Yes and press OK. 34 CONTROLS AND FEATURES English Picture Position The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs. NOTE: The Picture Position feature cannot be selected in the DTV mode. a In the Preferences menu, press B or b to select Display Settings and press OK. b Press B or b to select Picture Position. Display Settings Auto Format On 4:3 Stretch Off Picture Position PC Settings c d Press OK to view the options available for the picture format that has been selected. Press B or b to select an option and press C or c to adjust the settings. The options differ depending on the currently selected widescreen format and the input signal. Picture Position Horizontal Position 0 Vertical Position 0 Reset To return to the original factory settings, select Reset in the Picture Position menu and press OK. Picture still This feature is used to hold a still image on the screen. a Press r to hold an image on the screen, and press r again to cancel. HDMI Information Display When the HDMI Information Display feature is On and you are watching an HDMI input source, pressing the button displays the HDMI signal information banner. a In the Preferences menu, press B or b to select HDMI Information Display. b Press C or c to select On. HDMI signal information is as follows: Resolution, Scan Type, Frame Rate*, Aspect, Bit Depth, Colour Space, RGB/YUV, Chroma Format, and Content Type (if available). * If the HDMI input source is interlaced, “Field Rate” will be displayed instead of “Frame Rate”. 35 English CONTROLS AND FEATURES Wireless LAN Information Bluetooth™ and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth™ and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off either your Bluetooth™ or Wireless LAN device. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions. Europe Statement This Built-in WLAN Module may be operated in below country: Wireless LAN and your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices, however, is far less than the electromagnetic energy emitted by wireless devices such as mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization. Such restrictions may apply in environments where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies to the use of wireless devices in a specific organization or environment, you are encouraged to ask for authorization to use the Wireless LAN device prior to turning on the equipment. When using the TV under wireless LAN environment: AT Austria IS Iceland BE Belgium LI Liechtenstein CH Switzerland LT Lithuania CY Cyprus LU Luxembourg CZ Czech Republic LV Latvia DE Germany MT Malta DK Denmark NL Netherlands ES Spain NO Norway FI Finland PL Poland FR France PT Portugal GB United Kingdom SE Sweden GR Greece SI Slovenia EE Estonia SK Slovakia HU Hungary BG Bulgaria IT Italy RO Romania IE Ireland TR Turkey • If this device is going to be operated in the frequency range of 5.15 GHz to 5.35 GHz, it is restricted to indoor use. • If this device is going to be operated for 802.11 b/g/n function in the frequency range of 2.454 GHz to 2.4835 GHz in France, it is restricted to indoor use. • A general authorization is required for using this device outdoors or in public places in Italy. • This device is NOT ALLOWED to be used in the geographical area within a radius of 20km from the centre of Ny-Alesund in Norway. • Make the wireless LAN appropriate security setting at the time of wireless LAN use to prevent the illegal use, spoofing and interception of communications. • Don't connect wireless LAN to a outside network directly. Apply the wireless LAN access point with router function or broadband router. Make the router appropriate security setting to prevent the illegal use. Refer to the manual of router for a security setting. • The function of all IEEE802.11 is not supported. • The ad-hoc mode is not supported. • It is recommended to use IEEE 802.11a or IEEE 802.11n on 5 GHz for audio and SD video streaming. • It is recommended to use IEEE 802.11n on 5 GHz for HD video streaming. • It is recommended that the encoding rate for streaming video content is 20 Mbps or less. • It is not recommended to use 2.4 GHz for audio and video streaming. • Content playback may be interrupted by various surrounding interference. 36 CONTROLS AND FEATURES Easy Setup using PBC (Push Button Configuration) You can select the Network Type. a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Wireless Setup and press OK. c Press B or b to select Easy Setup and press OK. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press B or b to select Network Setup and press OK. Wireless Setup Easy Setup Preferences Assisted Setup Recording Setup Manual Setup HDMI CEC Control Setup Network Setup TV Guide Selection Network Device Setup Teletext d Auto Network Lock Off Panel Lock Off Press B or b to select Connection Type and press C or c to select Wired or Wireless. d Press C or c to select PBC. e Press b to highlight Start Scan and press OK. f g Following the on-screen instructions, push the appropriate button on your AP. When a window reporting that the setup is complete appears, press OK. Network Setup Connection Type Wired Wireless Setup Advanced Network Setup Network Connection Test e If you selected Wired, see “Advanced Network Setup” on page 39. NOTE: After you change between Wireless and Wired, switch off and on AC power supply to reset your TV. Communication may be impossible after the change of Wireless/Wired. Wireless Setup Easy Setup using PIN (Personal Identification Number) a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Wireless Setup and press OK. c Press B or b to select Easy Setup and press OK. d Press C or c to select PIN. e Press b to select Start Scan and press OK. f Press B or b to select the desired AP and press OK. NOTE: Continued connection of AP (Access Point) is not guaranteed. The connection may be disconnected while watching TV. There are 3 methods for Wireless Setup Easy Setup (WPS) If the AP supports WPS, this method can be used. • WPS is an industry standard designed to make connection of wireless LAN equipment and security setup easy. WPS will automatically configure all wireless settings. NOTE: WEP encryption may not be able to configured by easy setup. Assisted Setup (setup by using the AP’s notification information) Network Name, Authentication, and Encryption are decided based on information from the AP. You will manually set the Security Key. Manual Setup (manual input of all settings) NOTE: Check the Network Name and/or MAC address on the label of the AP or in the manual, and select your AP. g When the PIN code window appears, enter the displayed PIN into your AP, and then press Next to continue the PIN Setup. When a message displays to report that the setup is complete, press OK. To cancel searching for the AP: Press BACK while searching for the AP. A message will appear, and then press C or c to select Yes and press OK. Assisted Setup a 37 In the Preferences menu, press B or b to select Network Setup and press OK. English Setting up the Network English CONTROLS AND FEATURES b c NOTE: • Certain encryption types are only compatible with specific authentication types. - When Authentication is Open System, only WEP or None is compatible. - When Authentication is Shared Key, only WEP is compatible. - When Authentication is WPA-PSK or WPA2-PSK, only TKIP or AES is compatible. • When incompatible Authentication/Encryption pairings are detected, a warning message will be displayed, and no connection attempt will be made until the incompatibility is resolved. • There is only one key ID to set for WEP encryption. Press B or b to select Wireless Setup and press OK. Press B or b to select Assisted Setup and press OK. Wireless Setup Easy Setup Assisted Setup Manual Setup d Press B or b to select the desired AP and press OK. NOTE: Check the MAC address on the label of the AP or in the manual, and select your AP. e f Highlight Security Key and press OK. The Software Keyboard window will appear. Input the Security Key by using the Software Keyboard (see page 41). To save your setting, press the BLUE button. NOTE: • The Security Key must adhere to these conditions: - TKIP/AES: 8-63 ASCII or 64 Hex characters - WEP: 5 or 13 ASCII or 10 or 26 Hex characters • There is only one key ID to set for WEP encryption. g h i NOTE: Settings are not saved if BACK is pressed before Done is selected. j Highlight Done and press OK. NOTE: When Encryption is None, a message will appear. Press C or c to select Yes and press OK. NOTE: Settings are not saved if BACK is pressed before Done is selected. Wireless Information The settings configured in Wireless Setup can be confirmed. Manual Setup a a In the Preferences menu, press B or b to select Network Setup and press OK. b b c d Press B or b to select Wireless Setup and press OK. e Input the Security Key by using the Software Keyboard (see page 41). To save your setting, press the BLUE button. NOTE: This item is grayed out when Encryption is None. Highlight Done and press OK. NOTE: If Network Name is not displayed, see step 3 and 4 in Manual Setup below to set Network Name before pressing Done. Press B or b to select Security Key and press OK. Press QUICK to open the Quick Menu. Press B or b to select Wireless Information and press OK. Quick Menu Press B or b to select Manual Setup and press OK. More Information Channel Options Press B or b to select Network Name and press OK. The Software Keyboard window will appear. Sleep Timer Press B or b to select Authentication and press C or c to select Open System, Shared Key, WPA-PSK or WPA2-PSK. g Press B or b to select Encryption and press C or c to select None, WEP, TKIP or AES. TV Speakers Speakers Input the Network Name by using the Software Keyboard (see page 41). To save your setting, press the BLUE button. f 00:00 HDMI CEC Device Control Headphone Level 50 Intel® Wireless Display Wireless Information c When the Network Type is Wireless, a Wireless Information window will appear. NOTE: Press the RED button to scan for all APs. 38 CONTROLS AND FEATURES Advanced Network Setup Description Connected is displayed when the TV is connected with the AP. Disconnected is displayed when the TV is not connected with the AP. Signal Connection signal strength with AP (STRONG/MEDIUM/WEAK) Speed Link with AP Mode Working mode (11a, 11b, 11g, 11n) Network Name SSID set Authentication Authentication set Encryption Encryption set Security Key Security Key set AP MAC Address The AP’s MAC address is displayed when the TV is connected with the AP. TV MAC Address The MAC address of the TV (Wireless) is displayed. DHCP Enabled is displayed when using DHCP. Disabled is displayed when not using DHCP. IP Address The TV’s IP address Subnet Mask Value of the Subnet Mask Default Gateway Address of the Default GATEWAY DNS Address of the DNS English Item Status NOTE: • When the DHCP function of the router connected with this TV is On, you can set Auto Setup to On or Off. (This should usually be set to On.) • When the DHCP function of the router is Off, set Auto Setup to Off, and set the IP Address manually. IP Address Setup Auto Setup a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Advanced Network Setup and press OK. Network Setup Connection Type Wired Wireless Setup Advanced Network Setup c Press B or b to select IP Address Setup and press OK. Advanced Network Setup IP Address Setup DNS Setup MAC Address NOTE: Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP, the Speed value might be low. It is recommended that Encryption be changed to AES (see “Manual Setup” on page 38). d Highlight Auto Setup and press C or c to select On. IP Address Setup Auto Setup Notes on wireless LAN environment • The function of all IEEE802.11 is not supported. • The ad-hoc mode is not supported. • It is recommended to use IEEE 802.11a or IEEE 802.11n on 5 GHz for audio and SD video streaming. • It is recommended to use IEEE 802.11n on 5 GHz for HD video streaming. • It is recommended that the encoding rate for streaming video content is 20 Mbps or less. • It is not recommended to use 2.4 GHz for audio and video streaming. • Content playback may be interrupted by various surrounding interference. On IP Address xxx . xxx . xxx . xxx Subnet Mask xxx . xxx . xxx . xxx Default Gateway . . . NOTE: Other items will be grayed out when Auto Setup is set to On. Manual Setup a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Advanced Network Setup and press OK. c Press B or b to select IP Address Setup and press OK. 39 English CONTROLS AND FEATURES d Highlight Auto Setup and press C or c to select Off. IP Address Setup Auto Setup Manual setup a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Advanced Network Setup and press OK. c Press B or b to select DNS Setup and press OK. d Press B or b to select Auto Setup and press C or c to select Off. Off IP Address xxx . xxx . xxx . xxx Subnet Mask xxx . xxx . xxx . xxx Default Gateway xxx . xxx . xxx . xxx e Press B or b to select IP Address. f Press C or c to highlight the field you want to change, and then use the number buttons to input the IP address. To save the setting, press OK. DNS Setup NOTE: IP address field numbers must be between 0 and 255. After each field number has been set, press OK to store the entire address. If the entire IP Address is invalid, a warning message will appear after OK is pressed. g Press B or b to select Subnet Mask, and edit in the same way as IP Address. Auto Setup h xxx . xxx . xxx . xxx Subnet Mask xxx . xxx . xxx . xxx Default Gateway xxx . xxx . xxx . xxx Press B or b to select Default Gateway, and edit in the same way as IP Address. NOTE: If you manually set the IP address, you must not use the same IP address for any other device. The IP address you use should be a private address. DNS Setup NOTE: When the DHCP function of the router connected to this TV is Off, set Auto Setup to Off, and manually set the DNS address(es). Your internet service provider should have provided these to you. . xxx . xxx . xxx Secondary DNS Address xxx . xxx . xxx . xxx Press B or b to select Primary DNS Address. f Press C or c to highlight the field you want to change, and then use the number buttons to input the Primary DNS Address. To save the setting, press OK. Off IP Address xxx e IP Address Setup Auto Setup Off Primary DNS Address NOTE: DNS address field numbers must be between 0 and 255. If you input an incompatible number and press OK, the field number will reset to the previous value. g Press B or b to select Secondary DNS Address, and edit in the same way as Primary DNS Address. MAC Address You can view the fixed MAC address for the TV (Wired and Wireless). a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Advanced Network Setup and press OK. c Press B or b to select MAC Address and press OK. Auto setup a In the Preferences menu, press B or b to select Network Setup and press OK. b Press B or b to select Advanced Network Setup and press OK. c Press B or b to select DNS Setup and press OK. d Press B or b to highlight Auto Setup and press C or c to select On. NOTE: Other items will be grayed out when Auto Setup is set to On. 40 CONTROLS AND FEATURES Input operation on the remote control: Button This function checks the Internet connectivity. a b Inputs the selected character. 0-9 Inputs the number directly. BbCc Moves the character highlight. CC cc Moves the cursor. Z A message will appear to indicate if the connection was successful or if it could not be completed. Moves the cursor to the head of a character string. z Moves the cursor to the end of a character string. NOTE: The result of Network Connection Test does not always guarantee the connection. RED Deletes 1 character to the left of the cursor. GREEN Cycles through upper case, lower case, numbers, and symbols, if available. BLUE Saves changes and closes the Software Keyboard window. BACK Closes the Software Keyboard window without saving changes. In the Preferences menu, press B or b to select Network Setup and press OK. Press B or b to select Network Connection Test and press OK. To cancel the Network Connection Test: a Press BACK while searching for the Internet connection. Using the software keyboard You can enter text by using the Software Keyboard. The Software Keyboard window will appear when you press OK on a field that accepts character input. To enter text using the software keyboard: a b c d Description OK Highlight the desired character on the on-screen software keyboard. Press OK. Repeat steps 1 and 2 until you have entered all desired text. Press the BLUE button to close the software keyboard and return to the previous screen. NOTE: If BACK is pressed, changes are not saved and the software keyboard window is closed. The text will remain as it was before starting the keyboard. A a 1 @ AAA| A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 41 English Network Connection Test English CONTROLS AND FEATURES Network Device Setup • Time-out ( 60 seconds ) • When the EXIT button on the remote control is pressed Apps Control Profile Device Registration Setup The Apps function allows you to control the TV from network connected Apps (Tablet or Smartphone) like a remote control. Once a User Name has completed authentication, it is stored in the TV along with the password. The upper limit for the number of Use Names that can be remembered is 256. You can delete User Names that are stored in the TV. In order to use this function, the Setting up the Network (see page 37) and Device Name Setup (see page 43) is required. The Device Name will display on the screen of Apps (Tablet or Smartphone) application. a In the Preferences menu, press B or b to select Network Device Setup and press OK. a In the Preferences menu, press B or b to select Network Device Setup and press OK. b Press B or b to select Apps Control Profile and press OK. The Apps Control Account window will appear. c Press B or b to select to select Device Registration Setup and press the OK. The Device Registration Setup window will appear and the list of User Names managed by the TV will be displayed. d Press B or b to highlight the companion User Name. e Press B or b to select the Cancel, All, or Delete buttons and press Done. Preferences Recording Setup HDMI CEC Control Setup Network Setup TV Guide Selection Network Device Setup Teletext Auto Network Lock Off Panel Lock Off b Highlight External Control Setup and press OK. c Highlight Apps Control Profile and press OK. Using the Remote App control The Apps Control Account window will appear. The Remote Apps control supports a text input, mouse control and a touchpad control that allows you to use your Apps (Tablet or Smartphone) as a touch screen which is several operation modes. d Press B or b to select New Device Detection and press C c to select Enable and press OK. If the Apps ( Tablet or Smartphone ) is unregistered yet, then authentication will start automatically and 4digit numerical code will be appear on the TV. NOTE: • The Remote Apps control does not work under some conditions of the TV. • The functions are ignored while the TV is in Standby. • Some conditions are necessary to work. Please enter this code on your device. TV Power On Control (Active Standby) Companion Device ID : *********************** 1 e 1 1 4 Input 4 - digit numerical code to your Apps. If you success the authentication, 4 -digit numerical password on the TV disappears and User Name is stored in the TV along with the password. If not, Warning message will appear. And if the TV receives access from the same User Name, 4 - digit numerical code will be appear again on the TV. The 4 - digit numerical password display on the TV will disappear in the following situations: • Authentication complete When the TV is connected to the home network via Wireless LAN, With the TV Power On Control in Enabled, your TV can be turned on by control from Apps. a In the Preferences menu, press B or b to select Network Device Setup and press OK. b Press B or b to select TV Power On Control and press C or c to select Enabled (Active Standby). NOTE: • Depending on the device connected to the home network, it may take a while for the TV to turn on. • Depending on the device connected to the home network, this feature may not work. • If the unencrypted Wireless Setup is done, this feature can not be used. 42 CONTROLS AND FEATURES This function can be used to record and play digital broadcast programmes. Read the precautions below before recording or viewing programmes using the USB HDD record function. Media Renderer Setup The TV can be configured as a Media Renderer(DMR). When operating as a DMR, the TV displays content provided by a DMS. The selection of the media is done by DMC. The TV can play photo, movie, or audio files when operating as a DMR. a In the Preferences menu, press B or b to select Network Device Setup and press OK. b Press B or b to select Media Renderer Setup and press OK. c Press B or b to select Media Renderer and press C or c to select On. If request come from DMC, prompt will appear and DMR will start. To exit the Media Renderer: Press EXIT. Terminology DMS: DLNA CERTIFIED™ Server DMR: DLNA CERTIFIED™ Renderer DMC: DLNA CERTIFIED™ Controller Device Name Setup The TV’s device name can be changed. a In the Preferences menu, press B or b to select Network Device Setup and press OK. b Press B or b to highlight Device Name Setup and press OK. c d Highlight the Device Name field and press OK. The Software Keyboard window will appear. Input the Device Name by using the software keyboard (see page 41). Press the BLUE button. NOTE: The Device Name can be up to 15 characters long. e NOTE: • In order to use this function, a USB HDD needs to be connected to the TV. Do not use a USB Hub. • After recording operation, time may take to a recording start. • Recorded programmes saved on the USB HDD can only be viewed on this TV. They cannot be viewed when connected to another TV (including the same model of TV), a PC, or other device. • You cannot watch one channel while recording another. • If the recording time to the USB HDD is too short, no data may be saved. • You cannot record video input signals on the USB HDD. • Not all types of broadcast may be recordable. • After programming the TV to record digital broadcasting, do not disconnect the power plug before recording starts. Also, leaving the power switch “ON” until recording is scheduled to start, may cause the recording to fail. • Should video or audio recording fail due to malfunction of the TV or poor reception, no compensation shall be paid. • If there is a power failure or the power plug is disconnected during programmed recording, recording will stop and will not resume when the power returns or the plug is reconnected. • Do not disconnect the power plug when the indicator LED is lit. • Any changes implemented by the broadcasting station may affect programme scheduling. • Scheduling of multiple consecutive programmes may result in the beginning of each programme not being recorded. • Accurate start / finish time for recording is reliant on broadcasters maintaining correct time stamp if this not the case the recording will fail. • Some broadcasters can control whether a program can be recorded or how long you may be able to view it for after recording. The on screen message “Retention limit expired” means that the time limit for viewing the program has lapsed. • Programmed recording cannot take place if the power plug is not connected. • Disconnecting the power plug during recording may result in failure to save the recorded programme. • USB HDD recording feature is not available in all countries. • Do not turn off the TV during recording. • When the USB HDD is formatted, all the data stored on the HDD will be erased. Highlight Done and press OK to save your setting. 43 English USB HDD Record Function • The power consumption during Active Standby is more than it during Normal Standby. • After the change from Power On state to Active Standby, there may be a period of several ten seconds which does not receive the operation from a remote control or external apparatus. English CONTROLS AND FEATURES Setting up the USB HDD for recording How to set recordings via the Programme Guide To connect an USB HDD (not supplied): PLEASE NOTE USB1 or USB2 on the TV USB cable (not supplied) When a timed programme is about to start, an information screen will appear offering the option of watching or cancelling the programme. Other channels will not be available during the timed programme unless the programme timer is cancelled. USB HDD When you connect a USB HDD to the USB port on the TV, a prompt will appear. a Programmed recording can be scheduled easily using the Programme Guide or by specifying the date and time. Press C or c to select No and press OK. NOTE: Not guaranteed to work with all USB HDD. To record DTV programmes (One Touch Recording) It will only be possible to create or edit programme timers for the currently tuned DTV input. Using the Programme Guide to set future recordings a b To record the programme currently being viewed. a Press the zREC button on the remote control. The currently viewed programme will start to be recorded. The programme indicator (red) will be lit. c b Press B b C c to highlight the programme you want to record. Press OK. The Edit Timer menu will appear. Edit Timer The Daily Politics Timer Type Press the v (stop) button. A confirmation window “Do you want to stop Recording?” will appear. Press C or c to select Yes and press OK. Recording will stop. 10:50 Tue, 26 Apr 2 CABC Channel 11:30 - 12:30 Tue, 26 Apr To stop recording: a Press the GUIDE button on the remote control (or select TV Programmes / Guide menu from the menu system) to display the Electronic Programme Guide (EPG). Recording Set Timer Delete Timer d Press B or b to highlight Timer Type and press C or c to select Recording. e Press B or b to highlight Set Timer and press OK. The ORANGE LED will be lit. 44 CONTROLS AND FEATURES a To programme the timer: a Press MENU / C c / B / C c to highlight TV Programmes / Genre Search icons and press OK to access the Genre Search screen. Genre Search 10:50 Tue, 6 Apr b Movies 34 AB1 Hard Rain 31 PARIS PREMIERE Red Corner c Wed,27 Apr 0:15- 1:45 Press MENU / C c / B / C c to highlight TV Programmes / Programme Timers icons and press OK. Select the unprogrammed column (blank column) and press OK. The Edit Timer menu will appear. Wed,27 Apr 22:15- 23:55 10:50 Tue, 26 Apr Edit Timer 11 NT1 The Lawnmower Man Thu,28 Apr 1:20- 3:00 9 W9 A Vow to Kill Fri,29 Apr 1:30- 3:00 34 AB1 Parenthood Sat,30 Apr 0:45- 2:40 Channel 11 NT1 Body and Soul Sat,30 Apr 1:15- 3:00 Date 31 PARIS PREMIERE The Nun’s Story Sat,30 Apr 15:00- 17:30 Start Time 10:51 9 W9 Red Corner Sat,30 Apr 23:20- 1:15 End Time 11:51 11 NT1 The Real Blonde Sun,1 May 0:40- 2:00 Repeat Once 31 PARIS PREMIERE Critters b English To search for and record a programme using Genre Search: Timer Type Indiana Jones and the Temple of Doom Sun,1 May 21:10- 23:20 11 NT1 The jackal Sun,1 May 23:20- 1:15 34 AB1 Coup De Ville Mon,1 May 1:10- 3:00 Press C or c to select the genre. Programmes listed will change for the new genre. Press B or b to select the programme for which you want to schedule recording. Set Timer Press B or b to highlight Timer Type and press C or c to select Recording. d Press B and b to go through the list adding the details of the programme by using the number buttons and C and c to make selections. • Channel Select the channel you wish to record. 10:50 Tue, 26 Apr • Date Select the date that you wish recording to start. 2 CABC Channel 11:30 - 12:30 Tue, 26 Apr Recording Set Timer Delete Timer c Press OK. The Edit Timer menu will appear. Timer Type 30 CABC Channel Tue, 26 Apr 2011 Sun,1 May 0:40- 2:20 11 NT1 Edit Timer The Daily Politics Recording • Start Time Select the time to start recording. Delete Timer d Press B or b to highlight Timer Type and press C or c to select Recording. e Press B or b to highlight Set Timer and press OK. The ORANGE LED will be lit. • End Time Select the time to end recording. • Repeat Select “Once”, “Daily” or “Weekly”. Once Daily The selected content is recorded once. The same time slot on the same channel is recorded every day on and after the selected day. Weekly The same time slot on the same channel on the same day of the week is recorded on and after the selected day. e 45 Press B or b to highlight Set Timer and press OK. The ORANGE LED will be lit. English CONTROLS AND FEATURES To schedule a programme using the information screen: a • As the displayed programme time is calculated from the actual recording information, it may not match the recording time on the USB HDD. Press , the information screen will appear giving details of the channel and programme currently being viewed. 4 CHANNEL Z D+ To check a schedule: a 6:00 Thu, 11 Oct English To edit a schedule: a Now MLB Young’s two-run triple leads AL over NL AD 18 HD 16:9 News Next World News and Sports Also MLB Young’s two-run triple leads AL over NL 6:00- 8:00 15 min left 8:00- 9:00 b Press B or b to select the Next and press OK. The Edit Timer menu will appear. Edit Timer The Daily Politics a 10:50 Tue, 26 Apr b Recording Set Timer Delete Timer c Press B or b to highlight Timer Type and press C or c to select Recording. d Press B or b to highlight Set Timer and press OK. The ORANGE LED will be lit. Press B or b to highlight Set Timer and press OK. To delete a schedule: 2 CABC Channel 11:30 - 12:30 Tue, 26 Apr Timer Type Press B or b on the Programme Timers screen to select the title whose schedule you want to edit and press OK. The Edit Timer screen will appear. Change the settings as required, following the same procedure as for setting the schedule. Change b Press B or b on the Programme Timers screen to check the schedule. Press B or b on the Library screen to select the title whose schedule you want to delete. Press the RED button. Press C or c in the displayed confirmation window to select Yes and press OK. The selected schedule will be deleted. NOTE: You can also delete a schedule by selecting Delete Timer from the Edit Timer menu for each programming method. To view a recorded programme To view the recorded Library screen and select a title from the recorded programme list. To check, edit or delete scheduling information a You can check, edit or delete scheduling information. a Press MENU / C c / B / C c to highlight TV Programmes / Programme Timers icons and press OK. Programme Timers screen will appear. Press MENU / C c / B / C c to highlight TV Programmes / Library icons and press OK. Library screen will appear. Library 14:15 Wed, 16 Feb All Sun Sort : New Mon WWWWW WWWWWW Recording List WWWWWWWWWWWW WWWWWWW • Depending on the transmitter information, the programme broadcast time or other information may not be correctly displayed in the recording list. • The programme does not appear in the recording list immediately at the start of recording, but appears a few minutes after recording starts. • Up to 500 programmes can be displayed in the recording list. • If the channel settings are changed, the digital channel number, or other information may not appear correctly in the recording list. 46 WWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW Tue Wed Thu Fri Sat Wed, 16 Feb 10:00 Wed, 16 Feb 10:00 Thu, 17 Feb 10:00 Thu, 17 Feb 10:00 Fri, 18 Feb 10:00 Fri, 18 Feb 10:00 Fri, 18 Feb 10:00 Sat, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00 Mon, 18 Feb 10:00 1235 ITV London ASTRA 19.2°E 10 July 2011 14:30(01:30) USB HDD3 Remaining Capacity: 86% (912.0GB) CONTROLS AND FEATURES c Press B or b to select the title you want to view. A preview of the content selected can be seen on the preview screen. To protect or unprotect a recorded programme: To change the order in which the titles are listed, press the BLUE button. Select the title of the programme you want to protect and press the GREEN button. icon appears next to the title and the programme is protected. Press OK. Viewing starts. ● icon appears next to the title currently being recorded. When the title currently being recorded is selected and OK is pressed, playback will start from the beginning of the programme currently being recorded. If Protect is set to On when the programme is recorded, icon appears next to the title of the recorded programme. Protecting a programme prevents it from being accidentally deleted. When a title with icon is selected and the GREEN button is pressed, icon disappears and the programme is unprotected. To delete a recorded programme: a Operations during viewing The following operations can be performed using the remote control buttons. c v W/w To PLAY To STOP To PAUSE/STEP Z CC To SKIP-BACK To REWIND cc z Cc b To FAST FORWARD To SKIP-FORWARD To shift playback position Press the RED button. Check boxes will appear next to the titles. Press B or b to select the title you want to delete and press OK. A check mark will be inserted in the check box. Library All Sort : New WWWWW WWWWWW WWWWWWWWWWWW Operations from the Library screen WWWWWWW To display the Library screen: a Library Mon WWWWWWWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW WWWWWWW F WWWWWWW F S S To uncheck all the check boxes, press the BLUE button. 14:15 Wed, 16 Feb WWWWW WWWWWW WWWWWWW WWWWWWW To insert a check mark against all the titles, press the YELLOW button. NOTE: • A check mark will not be inserted against protected titles. • Note that once deleted, a title cannot be restored. All WWWWWWW Th F WWWWWWW Press MENU / C c / B / C c to highlight TV Programmes / Library icons and press OK. The Library screen will appear. Sun Sort : New WWWWWWW WWWWWWW As well as viewing the list of recorded titles on the Library screen, you can protect or delete titles and register titles to Personal Mode. We We Th Tue Wed Thu Fri Sat Wed, 16 Feb 10:00 Wed, 16 Feb 10:00 Thu, 17 Feb 10:00 Thu, 17 Feb 10:00 Fri, 18 Feb 10:00 Fri, 18 Feb 10:00 Fri, 18 Feb 10:00 Sat, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00 Mon, 18 Feb 10:00 1235 ITV London c ASTRA 19.2°E 10 July 2011 14:30(01:30) USB HDD3 Remaining Capacity: 86% (912.0GB) 47 Press the RED button. Select Yes in the confirmation window and press OK. All the titles with check marks will be deleted. English b English CONTROLS AND FEATURES d USB HDD capacity You can check the remaining capacity of the USB HDD using Remaining Capacity. Recording Setup Select Device Thu, 17 Feb 10:00 Fri, 18 Feb 10:00 Fri, 18 Feb 10:00 Fri, 18 Feb 10:00 Sat, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00 Sun, 18 Feb 10:00 Mon, 18 Feb 10:00 Press B or b to select One Touch Recording Time. One Touch Recording Time 1235 ITV London Programme End Time ASTRA 19.2°E TimeShift Size 10 July 2011 14:30(01:30) USB HDD3 Remaining Capacity: 86% (912.0GB) Start Padding Time None End Padding Time None 512 MB Device Test Format Device e NOTE: The remaining capacity displayed is only a guide; it is not guaranteed. Press C or c to select the recording time. You can set the Programme End Time in 30-minute increments in the range of 30 minutes to 360 minutes. Recording Setup To select the TimeShift Size: You can set your preferences for recording. To select USB HDD and Partition for Recording: a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c a In the Recording Setup screen, press B or b to select TimeSift Size. b Press C or c to select 512MB, 1GB, 2GB or 4GB and press OK. To use TimeShift recording: Press B or b to select Recording Setup and press OK. Time Shift recording allows you to pause live TV for a fixed period of time. For Example: If you move away from the TV for a short period, such as when the phone rings while you are watching TV, you can easily pause live TV and then continue to view from the same point in the programme when you return. Preferences Recording Setup HDMI CEC Control Setup Network Setup TV Guide Selection a Press W/w on the remote control while viewing the DTV programme. The screen will switch to a still image and recording will start automatically. The recording time is decided by TimeShift Size. If the TimeShift file size reaches the limit set, then the TV will continue to be paused, but the recording buffer will be reset to the beginning. b Press c (play). Catch-up viewing will start from where the programme was paused. c Press v (stop) to stop the recording. Network Device Setup Teletext d e Auto Network Lock Off Panel Lock Off Press B or b to select Select Device and press OK. USB HDD and Partition list will be appear. If USB HDD is partitioned by PC, several partitions will be displayed. Select USB HDD and Partition you want to recording. To set the recording time for One Touch Recording: a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press B or b to select Recording Setup and press OK. 48 CONTROLS AND FEATURES a In the Recording Setup screen, press B or b to select Start Padding Time. b Press C or c to select a time. You can select from None, 3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, and 45 minutes. Recording will start at the selected number of minutes prior to the recording start time. c Press B or b to select End Padding Time. d Press C or c to select a time. You can select from None, 3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, and 45 minutes. Recording will end at the recording end time plus the selected number of minutes. To perform a USB HDD operation test: a In the Recording Setup screen, press B or b to select Device Test and press OK. USB HDD operation test will start. Wait until the test ends. NOTE: The results of the device test are only a guide. The device may not function as shown in the results. To format a USB HDD: a In the Recording Setup screen, press B or b to select Format Device and press OK. b Press C or c to select Yes in the confirmation window that will appear and press OK. Formatting will start. Wait until formatting ends. NOTE: • If the USB HDD is separated several partitions by PC and multiple Partition appear on the Device List screen, press B or b to select the Partition you want to format. • When the USB HDD (or Partition) is formatted, all the data stored on the USB HDD (or Partition) will be deleted. Scheduling priority If scheduled time slots are next to each other and there is more than one minute between the end time of the first schedule and the start time of the next schedule, programmed recording will be performed correctly. • When Start Padding Time and End Padding Time are set (see page 49), the start time and end time will be the time plus the additional minutes. If scheduling times overlap, priority will be given to the programmed recording which starts first. When the programmed recording that started first ends, recording will switch to the next scheduled programme. At this time, depending on how far the scheduling times overlap, the beginning section of the next scheduled programme may not be recorded. • When End Padding Time is set for the first programmed recording (see page 49), depending on how far the scheduling times overlap, the End Padding Time may be ignored and recording of the next scheduled programme may start. As priority is given to the time set in the Set Timer menu over the Padding Time, recording will automatically be triggered when the next scheduled programme start time is reached during End Padding Time. 49 English To set the padding time for programmed recording start time and end time: English CONTROLS AND FEATURES Using Toshiba Places Discover new, exciting possibilities with Toshiba Smart TV - because just watching television is a thing of the past! TV used to be: sit down, relax and watch television. Toshiba Smart TV today is: sit down, relax, watch television and much, much more! Enjoy new possibilities, such as surfing the Web, chatting, browsing social networks, photo communities, video portals, news, sports results... the possibilities are almost endless and are increasing all the time. NOTE: • Some features require an always-on broadband internet connection, firmware update and/or additional bandwidth dedicated to this product. Third party internet services may change or be discontinued or restricted at any time. Toshiba makes no warranties, representations, or assurances about the content, availability or functionality of third-party content or services. Use of third party internet services may require registration by a computer and/or payment of charges and membership. Not all services or content may be available on this product, in your country or with your language. In order to experience the full capabilities of this product, fully compatible devices may be required. For more information, visit http://www.toshibaplaces.com/about. • This service may be forcibly blocked according to the situation of CSP service. Stay entertained and informed with Toshiba Places. In order to make it as simple as possible to access a wide variety of new content as simple as possible, we created Toshiba Places. This is a portal for music, video and more on your Toshiba Smart TV. Experience plenty of interactive applications and transform your television into a true multimedia centre! You can access a wealth of attractive services right now. But we don't stand still - more interesting and up-to-date services are added all the time!. NOTE: You need to configure a home network before using this feature (see page 13). a Press on the remote control, or press MENU / C c to highlight Toshiba Places icon and press OK. Display Example b Press BbC c to select the desired place and press OK. 50 CONTROLS AND FEATURES Using Skype The web browser on this TV lets you explore everything the web has to offer. Along with access to popular places, you'll be able to search for and browse your favorite sites. Skype-ready Toshiba TVs bring your family and friends closer to your home. Skype on your Toshiba TV allows you to share special moments no matter the distance. NOTE: • Certain services may not be currently available in your area. • Your registration or login may be required to use some services. • Third party internet services are not provided by Toshiba, may change or be discontinued at any time and may be subject to Internet service provider restrictions. Toshiba makes no warranties, representations, or assurances about the content, availability or functionality of third-party content or services. Use of third party Internet services may require the creation of a separate account through a computer with Internet access and/or payment of one-time and/or recurring charges and membership. Not all third party services may be available on or compatible with this product. In order to experience the full suggested capabilities of this product, fully-compatible devices may be required. - does not support platform-dependent technologies such as Active X. - only supports preinstalled plug-ins. - may not support media formats other than the following: JPEG/PNG/GIF. - uses a single built-in font. Some text may not be displayed as intended. - does not support downloading of files or fonts. - is a TV browser. It may work differently than PC browsers. - does not support parental control or locks, and it is the responsibility of the you to monitor browser usage by minors. - In addition, some web pages may exceed the memory allotment of the web browser. The web browser will close when this happens. • Some pages may not be displayed correctly or may display differently on different devices. • Certain services may not be available in your area. Before using Skype - Preparation • Connect the FREETALK HD Camera: TALK-7291 to the TV’s USB terminal. Do not use a USB hub. For a Skype-ready Toshiba TV compatible camera, please visit the following website: www.freetalk.me/toshiba/TALK7291 • Arrange the HD camera on top of the TV, ensuring it's in the center. • Connect to the network. NOTE: • The HD camera is sold separately. • Do not connect a camera other than the recommended HD camera. • Using a wireless network may result in degraded call quality. • Some of the features available on other versions of Skype are not available on the television. • When using Skype, some functions of the TV will not be available. • The sound settings are switched to Skype mode. • Skype is usable on the TV speakers only. • If you cannot hear the person you're speaking with, check your TV volume. • When Optical Digital output or Analog output is used and you are signed in, the ring tone may not sound. • The volume level on Skype may differ from other features on your TV. • When the Reset TV feature is used from the TV Menu, Skype information is reset to factory default settings. • Screenshots used in this manual may differ from the TV Menu, Skype will be reset to its factory default settings. To use the web browser: a Press on the remote control, or press MENU / C c to highlight Toshiba Places icon and press OK. b Press BbC c to select Browser icon and press OK, and Home page URL will open. c Enter the desired URL address by using the BbC c buttons of remote control. Press BLUE button on the remote control. d You can now browse websites on your TV using BbC c buttons on the remote control. 51 No emergency calls with Skype Skype cannot be used for emergency calls. English Using Web Browser English CONTROLS AND FEATURES Getting started a b Press on the remote control, or press MENU / C c to highlight Toshiba Places icon and press OK. Press BbC c to select Skype icon and press OK. “Welcome to Skype” screen appears. Welcome to Skype Skype Name Press [OK] Password Press [OK] d You'll now be signed into your new account. NOTE: • Please ensure that you have entered your email address correctly. It is required in case you lose or forget your password. • If you forget your password, visit skype.com to retrieve it. • If a message appears informing you that the entered Skype name is already registered, please choose a different name. If you have a Skype account, sign into Skype in the Welcome to Skype screen. Start Skype when TV starts c Select “I agree - create an account” and press OK. To Sign into Skype: Sign in when Skype starts Sign in c Create Account a Enter your Skype Name and Password. b Select Sign in and press OK . Select Sign in or Create Account. • If “Sign in when Skype starts” is checked, your account will sign in automatically when you launch Skype from the menu. • If “Start Skype when TV starts” is checked, your account will sign in automatically when you turn on the TV. Both these options can be selected together. To create a new account: If you do not already have a Skype account, you can create a new one from your TV. a Select Create Account in the Welcome to Skype screen and press OK. Basic Operation Create new Skype account Full Name Skype Name 6 and 32 characters Password 6~20 characters Repeat Password 6~20 characters Email Press B or b to select a tab ( Contact List, History, Dialer, or Options). Press c/Bb to select a contact from the list. Your contact list will contain the following information: Contact name / Current online status / Profile picture / Mood message 1~70 characters Press [OK] Your profile picture, status, Skype Name, mood message and available Skype Credit. Yes, send me Skype news and special offers. I have read Skype’s terms and conditions at www.skype.com/eula, www.skype.com/tos and the privacy statement at www.skype.com/privacy. I agree - create account Name - TextTextTextTextTextTextTextTextTextTextTextText Skype Credit Cancel Contact List Name Name TextTextTextTextTextTextTextTextText Create new Skype account Full Name Name Name TextTextTextTextTextTextTextTextText 1~70 characters Name Name Skype Name TextTextTextTextTextTextTextTextText 6 and 32 characters Name Name TextTextTextTextTextTextTextTextText +8888888888888 ! “ £ $ % ^ & * ( ) _ + Q W E R T Y U I O P { } @ Status b Alt A S D F G H J K L : | Z X C V B N M < > ? Add Contact Exit Tab ~ Status: Change your availability status Add Contact: Add a Skype account or phone number EXIT: Return to previous screen. When at contact list, the EXIT button will close Skype application without sign out. Enter The current status for each of your contacts are explained below: Enter your Full Name, Skype Name, Password, Repeat password, and Email. : Online : Offline : Do not disturb : Blocked • If you want to receive Skype news and special offers, check the selection box. Skype will inform users about new products, features and special offers by email. 52 : Away : Phone number : Offline with voice messaging or call forwarding enabled CONTROLS AND FEATURES English Contact List Below is all icon pictures in conversation window. Press B or b to select Contact List tab. Press c/ B b to select a contact. Start video When pressing OK at each contact, the following functions will be displayed: Hold the call Stop video Resume the call No blocked contactor Unmute the webcam mic Name - TextTextTextTextTextTextTextTextTextTextTextText Skype Credit Mute/Unmute your audio Contact List Name Name Normal size video Name Name TextTextTextTextTextTextTextTextText Name Name TextTextTextTextTextTextTextTextText Name Name Video call Full screen video Voice call Open dial pad View Profile TextTextTextTextTextTextTextTextText Send Voicemail Name Name TextTextTextTextTextTextTextTextText End call ( Hang up the call ) Block Remove +8888888888888 Group calls Status Add Contact Exit Initiate Video Call Initiate Voice Call View Profile - View contact profile (including Skype name, full name, birth date, gender, location, mobile number and email). Send Voicemail - Send Voicemail to contact Block - Block / unblock contact Remove - Remove contact from list Video or Voice call Press BbC c to select Video call or Voice call, your screen will now display your call as shown below. Using your Toshiba TV, you can join Skype group voice and video calls. However, you can only send and receive audio whilst on these calls. NOTE: You must be invited on to a group call, you cannot initiate it from the TV. Incoming call Incoming calls on Skype will be displayed on the bottom right hand corner of your TV screen. You'll also hear a ring tone which can be adjusted using the VOLUME buttons on your remote control. Video call Other side Own side Call duration: 00:03:24 Name Incoming Call... Name Name Video Stop Video Hold Mute Full Screen End Call Voice call +8888888888888 You are given three options when an incoming call arrives: • Video : Answer by video call. • Voice : Answer by voice call. • Decline : Decline the incoming call. Name me 8888888888888 4 2 3 5 6 7 8 9 * 0 # Dial Pad Hold Mute Decline NOTE: If other applications are active or recording, you'll only get an “Incoming call notification” until the application or recording has stopped. Call duration: 00:03:24 1 Voice End Call 53 English CONTROLS AND FEATURES Status When pressing the GREEN button, the change status window is displayed as below. You can change your status by pressing the B or b button and then pressing OK. Exit by pressing the BACK button. You can send a contact request to a person displayed in the search results. Press B or b button to select a person and press OK. Notification of authorization request Name - TextTextTextTextTextTextTextTextTextTextTextText Skype Credit Name Contact List - TextTextTextTextTextTextTextTextTextTextTextText Skype Credit Name Name TextTextTextTextTextTextTextTextText Online Contact Listt Name Name Name Name Do not disturb TextTextTextTextTextTextTextTextText TextTextTextTextTextTextTextTextText Away Name Name Name Name TextTextTextTextTextTextTextTextText TextTextTextTextTextTextTextTextText Invisible Name Name Name Name Sign Out TextTextTextTextTextTextTextTextText TextTextTextTextTextTextTextTextText Notification +8888888888888 Name Name You have received a contact request. TextTextTextTextTextTextTextTextText +8888888888888 Status Add Acount Exit OK Add Contact When you receive a contact request, a pop-up menu will appear where you can choose to Accept, Block or Decline the request. You can add contacts to your contact list. Press B or b button to select and press OK. Status Add Contact Exit When you press the YELLOW button on the remote control, the Add Contact Type menu window will appear on the screen. Request Form ms_audi john5678236 Name - TextTextTextTextTextTextTextTextTextTextTextText Skype Credit Contact List Name Name Add Contact Type TTextTextTextTextTextTextTextTextText Name Name Exit Skype Contact TTextTextTextTextTextTextTextTextText Name Name Press C or c button to select and press OK. Phone Number TTextTextTextTextTextTextTextTextText Name Name TTextTextTextTextTextTextTextTextText Exit ms_audi +8888888888888 Hello! Please add me to your Contacts. Status Add Contact Exit Two sub-functions are supported. Press B or b button to select Skype Contact or Phone Number and press OK. • Skype Contact Enter the Skype Name of the person you're looking for. The search result will show up after get response from Skype server. • Phone Number You can also enter a phone number in the search window. Accept Block Decline History You can see a list of past events in “History”. Press B or b to select the History tab. Press c/Bb to select an item and press OK. Contact Search Results Name - TextTextTextTextTextTextTextTextTextTextTextText Skype Credit Add a Skype contact History Search Result: (jackyding) Name Name Name Name Full Name Skype Name Country Tue Jul 3 04:07:47 2012 Aaaaaa_0101 Duration 00:10:00 Aaaaaa_0101 USA Name Name Bbbbbb007 Bbbbbb007 UK Tue Jul 3 03:44:58 2012 Cccccc0709 Cccccc A01 HK Name Name View Profile Mon Jul 2 10:01:11 2012 Send Voicemail Ddddddd Ddddddd Ddd Taiwan Eeeeee_Eeee EE_Eeeee Japan Ffffffffff_Fu Ffffffffff_Ff Taiwan Gggggg_Ggg Gggggg_Ggg Taiwan Video call Duration 00:01:06 Listen to Voicemail Name Name Mon Jul 2 06:36:49 2012 Duration 00:03:04 Back Add to Contacts Delete This Item Name Name Tue Jun 28 03:30:17 2012 Duration 00:00:08 Status Press C or c to select Video call or Voice call. 54 Voice call Duration 00:00:00 Add Contact Exit CONTROLS AND FEATURES Icons Description English Each call has an icon with it. The meaning of each icon is as follows: Options Press B or b to select the Options tab and press OK. The Options page will appear. Incoming call Options Outgoing call User Profile Name Name (1/2) Change Password Missed call Gender -Select One- General Settings Unread voice mail Audio Settings Privacy Settings Voice mail Birth Date (D) (M) (Y) Country/Region -Select OneState/Province Press [OK] City Press [OK] Blocked Contacts Dialer Home Phone Press [OK] Call Settings Office Phone Press [OK] About Skype Mobile Phone Press [OK] Exit You can call mobiles and landlines from this screen. Press B or b to select the Dialer tab. Press c/Bb to navigate this screen. Name - TextTextTextTextTextTextTextTextTextTextTextText You can change the following settings: • User Profile Add or change your personal information e.g. birth date, country/region or phone number. Skype Credit • Change Password You can change your password by entering your existing password and new password twice. Dialer Please input the country code -Select OneTaiwan +886 Tajikistan +992 Tanzania +255 Thailand +66 Timor-Leste +670 Togo +228 • General Settings Select whether Skype should automatically start when turning on the TV. Status Add Contact Exit Select the country or region first, and then enter the phone number with area code. You'll need a little Skype Credit in your account to call mobiles or landlines using Skype. Emergency calls over Skype are not supported. • Audio Settings Adjust the speaker / ringtone volume manually. The volume of your speakers will be different on Skype compared to your normal TV volume level. The speaker volume range is 0 - 100% by 1 steps, and ringtone volume is 0 - 100% by 25 steps. • Privacy Settings Set who you allow calls from, whether it's Anyone or People in my Contact list only. • Blocked Contacts If you do not want someone to reach you, simply block them by entering their Skype Name or phone number from this menu. Successfully blocked contacts are displayed in this window. • Call Settings If you're not signed into Skype, you can forward incoming calls to another phone number or choose to accept voice messages. However you'll need to have Skype Credit to turn this feature on. • About Skype DIsplays information about Skype. 55 English CONTROLS AND FEATURES Using Hybrid TV Standard (if available) Hybrid TV Standard enables the TV to receive HbbTV services. TV services which support this feature often show “press RED” on the screen. NOTE: You need to configure a home network before using this feature (see page 13). Using Intel® Wireless Display Intel® Wireless Display (Intel® WiDi) is supported on this TV. You can use your TV as second display for PC with Intel® Wireless Display. a b Press QUICK to open the Quick Menu. Press B or b to select Intel® Wireless Display and press OK. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press b to select Hybrid TV Standard. Intel® WiDi device name and ID list will then be displayed on the PC screen. d Press C or c to change from Disabled to Enabled. Select the TV which you wish to connect to. When changing from Disabled to Enabled, a Network Connection Test is performed. If the result is OK, then the setting changes to Enabled. If not, the setting remains Disabled. A prompt will appear on the screen. Select Yes. c “Connecting” will be shown on the TV. d Connecting your PC to your TV the first time When selecting the Toshiba TV for the first time, a 4digit code will appear on your TV screen. This code needs to be inputted into your computer to authenticate the connection. When “press RED” is indicated on the screen, press the RED button to access HbbTV service site, and then press BbC c to select the desired contents. NOTE: • This service is not available outside Germany. • The HbbTV service indication or required key operations may not be possible depending on the service contents. In this case set the Hybrid TV Standard setting to Disabled. • Toshiba makes no warranties, representations, or assurances about the content. Launch the Intel® WiDi software on your PC and select “scan for available adaptors”. If authentication has already taken place ”Connected to Intel® Wireless Display. Please Wait” will appear on screen. e After the Intel® WiDi connection is complete, the TV screen will mirror the content shown on the PC screen. NOTE: • When connecting Intel® WiDi, PC must have power turned on. • When the Intel® WiDi software is active, other applications may not be usable. • Intel® WiDi device name of the TV can be changed from the Intel® WiDi software. 56 CONTROLS AND FEATURES Exit Intel® Wireless Display by pushing the disconnect button on Intel® WiDi software or by pressing EXIT on the TV remote control. NOTE: If the PC has been inactive for some time, the Intel® WiDi connection will be disconnected automatically. Intel® Wireless Display Device Name The TV's Intel® Wireless Display device name can be changed. Using the Media Player This TV allows you to enjoy movie, music and photo files stored on a USB device connected to the USB port. Moreover, you can also play photos, movies or music files from your PC by connecting the TV to your home network. Terminology: DMP: DLNA CERTIFIED™ Player a In the Preferences menu, press B or b to select Network Device Setup and press OK. DMS: DLNA CERTIFIED™ Server b Press B or b to highlight Intel® Wireless Display Setup and press OK. DMC: DLNA CERTIFIED™ Controller c d e Highlight the Intel® Wireless Display Name and press OK. The Software Keyboard window will appear. Input the Intel® Wireless Display device name by using the software keyboard (see page 41). Press the BLUE button. Highlight Done and press OK to save your setting. PC List PC List displays a list of MAC addresses for previously connected PC that have been connected before. The maximum number that can be stored is 20. DMR: DLNA CERTIFIED™ Renderer • DMP: The TV can control and play content from a DMS. - A DMS is a device that can function as a server for DMP or DMR. • DMR: The TV can play content from a DMS. Playback is controlled by a DMC. - A DMC is a device that can instruct the TV to display content. NOTE: • Do not insert/remove USB device while in use. • MENU is not available during playback. • When you want to use your TV as a DMR, set Media Renderer to On (see “Media Renderer” on page 43). Media Player Specifications Device USB device Interface version: USB2.0 HS If the list run out of space, the least-recently-used MAC address will be deleted and the new MAC address added automatically. a USB Mass Storage Class devices (MSC) NOTE: • Connectivity is not guaranteed for all devices. • Incorrect behaviour may occur with a USB hub connection. In the Intel® Wireless Display Setup screen, highlight the PC List and press OK. PC List will appear. The registered PC can be deleted one by one by pressing RED key in the List. File system: FAT16 and FAT32 Maximum memory size: Unlimited When doing so the following text can be seen “Do you want to unregister this PC? Yes/No” (default cursor is “No”). DLNA CERTIFIED™ Server: Your PC (for example) You must obtain any required permission from copyright owners to download or use copyrighted content. TOSHIBA cannot and does not grant such permission. 57 English To exit Intel® Wireless Display: English CONTROLS AND FEATURES Basic operation Using Media Player with USB When Auto Start is enabled, you will be asked if you want to start the Media Player whenever a USB device is inserted. If Auto Start is disabled (or if you want to connect to a DMS on the network), you must manually start the Media Player from the menu. To select a file in the Multi View: a b Press Bb C c to select a file or folder. Press OK to move to the next layer, or press BACK to return to the previous layer. NOTE: You can also return to the previous layer by selecting the icon at the top left of the Multi View screen and pressing OK. To change the Auto Start setting: a Press MENU / C c to highlight Media Player icon. b Press B / C c to highlight USB Media Player and press OK. c Press B or b to select Media Player setup and press OK. d Press B or b to select USB Auto Start and press C or c to select On or Off. To close the Media Player: a Using the Media Player with a DLNA CERTIFIED™ Server You need to configure a home network before using this feature (see page 13). a Press MENU / C c to highlight Media Player icon. b Press B / C c to highlight Network Media Player and press OK. Auto Start a b Insert USB device into the USB socket on the left side of the TV. A prompt will appear. Press EXIT. c Select the server you want to use and press OK. Multi View will appear. Multi View (DMS) Press C or c to select Yes and press OK. Network Media Player c d NOTE: If Auto Start is set to Off, you can start the Media Player manually. Manual Start Insert USB device into the USB socket on the left side of the TV. b Press MENU / C c to highlight Media Player icon. c Press B / C c to highlight USB Media Player and press OK. d Press B or b to select Photo, Movie or Music and press OK. e Return xxxxxxxxx xxxxxxxxx.jpg xxxxxxxxx.mp3 xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.jpg xxxxxxxxx.mpg xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.jpg xxxxxxxxx.jpg Select the connected USB device and press OK. Multi View will appear. a 5/9999 ///Folder name Press B or b to select Photo, Movie, or Music and press OK. Photo, Movie and Music files and folders are displayed in the Multi View (DMS). To select a file in the Multi View: a b Press Bb C c to select a file or folder. Press OK to move to the next layer, or press BACK to return to the previous layer. NOTE: You can also return to the previous layer by selecting the icon at the top left of the Multi View screen and pressing OK. To close the Media Player: Select the connected USB device and press OK. Files are displayed in the Multi View according to the type first selected (Photo, Movie or Music). a e.g. If you first selected Photo, only Photo files will be displayed. 58 Press EXIT. CONTROLS AND FEATURES There are three types of viewing modes. Multi View (USB Photo) This view allows you to search for photos in a grid format. The pictures are displayed using thumbnail data in each image file. Single View In this mode, only files located in the selected directory will be displayed. This view allows you to change the photo content manually. When moving from Multi View to Single View, the currently selected photo will be displayed. a Press c to view the next photo. Press C to view the previous photo. b Press B to rotate the image 90° clockwise. Press b to rotate the image 90° counterclockwise. Broken photo contents 5/9999 /Folder/select Folder or File c Press to display file status information (file number, photo title, resolution etc.). Return xxxxxxxxx.jpg xxxxxxxxx.jpg xxxxxxxxx.jpg NOTE: The information may not be correctly displayed depending on the contents, DMC or DMS. xxxxxxxxx.jpg xxxxxxxxx.jpg xxxxxxxxx.jpg xxxxxxxxx.jpg Slide Show xxxxxxxxx.jpg xxxxxxxxx.jpg xxxxxxxxx.jpg xxxxxxxxx.jpg This view allows you to watch a slide show of your photos. In this mode, only files located in the selected directory will be played. The initial highlighted position will be on the top left thumbnail in the Multi View. a To start slide show, press OK in the Single View mode. a b Press C or c to view the previous/next photo. c Press Press B b C c to move the highlight in one window. If all of the photos will not fit in one screen, when pressing C at the top left thumbnail, the screen will move to the previous page. Conversely, when pressing c at the bottom right thumbnail, the screen will move to the next page. PU Pu buttons can be used to page up/down the Multi View when there are more photos than will fit onto one screen. When the PU Pu buttons are pressed, the highlight shall be on the photo at the top left of Previous/Next Multi View. NOTE: The page down function on the last page and page up function on the first page are not available. b c to display file status information. NOTE: Pressing B or b while in the Slide Show mode will stop the slideshow and rotate the photo. To set Interval Time and Repeat settings: a Press QUICK to open the Quick Menu. b Press B or b to select either Interval Time or Repeat. c Press C or c to adjust the setting and press OK. NOTE: When in the DMS and Multi View modes, this feature cannot be used. When you select a folder, press OK to move to the next layer. Press BACK to move back to the previous layer. Press OK to view the selected photo in Single View mode. 59 English Viewing photo files (on a DLNA CERTIFIED™ Server or USB device) English CONTROLS AND FEATURES To set Background Music (USB only): To select a photo from Play List: a While in the Single View mode or Slide Show mode, you can select a different photo from the Play List. b Press QUICK to open the Quick Menu while in the Slide Show mode. a Press B or b to select Background Music and press C or c to select On. b The music file in the same folder as the displayed photo will start playing. Press QUICK to open the Quick Menu from Single View mode or Slide Show mode. Press B or b to select Play List and press OK. The Photo List will appear. NOTE: • When the music file repeat mode is set to All (see page 64), all the music files in the same folder as the photo will be played repeatedly. • To stop music file playback, select Off in Background Music. c Press B or b to select a file name. To close the Photo Viewer: a To zoom in/out photos: Press EXIT. The television will return to the last viewed channel or external input. File Compatibility During the Single View mode or Slide Show mode, the zoom function can be used. See page 85. RED button (Zoom in) USB: x1 S x2 S x4 S x8 zoom DMP: x1/8 S x1/4 S x1/2 S x1 S x2 S x4 S x8 zoom GREEN button (Zoom out) USB: x8 S x4 S x2 S x1 zoom DMP: x8 S x4 S x2 S x1 S x1/2 S x1/4 S x1/8 zoom BACK button: Normal playback B b C c buttons: Vertical or Horizontal scrolling NOTE: Using the zoom function while in the Slide Show mode will stop the slideshow and zoom in/out the photo. 60 CONTROLS AND FEATURES • Press W/w to pause. PAUSE may not be available depending on the contents, DMC or DMS. • To resume normal playback, press c (play). • To play in fast reverse or fast forward directions, press CC or cc during playback. Each time you press the CC or cc, the playback speed will change. • To locate a specific file, press Z or z repeatedly. • Press to display the file status information (content number, movie title, progress time etc.). You can select movies from a Multi View of available files. Multi View (USB Movie) 5/9999 ///Folder name a Return xxxxxxxxx xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg xxxxxxxxx.mpg Press B b C c to select a file or folder. PU Pu buttons can be used to page up/down the Multi View when there are more files than will fit onto one screen. NOTE: The page down function on the last page and page up function on the first page are not available. b c When you select a folder, press OK to move to the next layer. Press BACK to move back to the previous layer. With the desired file selected, press OK or c (play) to start playback. NOTE: • On preview screen, if you highlight the file without pressing OK, the content is played on a preview screen. When OK is pressed, it is played in full screen mode. • Depending on the file size, it may take some time to start playback. d NOTE: • The information may not be correctly displayed depending on the contents, DMC or DMS. • During playback, you can adjust the Picture and Sound menu functions from the Quick Menu. • The playback speed (CC / cc) may not change depending on the stream. To select subtitle and audio languages (USB only): • Press SUBTITLE repeatedly to select your preferred subtitle language. • Press s repeatedly to select your preferred audio language. NOTE: This feture is not available depending on the contents. To set the repeat mode: a Press QUICK to open the Quick Menu. b Press C or c to select Off, All or 1. Mode Press v to stop playback. NOTE: • If playback finishes before v is pressed, the screen will return to the Multi View. • Depending on the file size, it may take some time for playback to begin. Description Off The file is played back only once. All Files in the same folder are repeatedly played back. 1 The same file is repeatedly played back. c Press BACK. NOTE: When in the DMS and Multi View modes, this feature cannot be used. 61 English During playback: Viewing movie files (on a DLNA CERTIFIED™ Server or USB device) English CONTROLS AND FEATURES Resume Play (USB only) To register your TV to a DivX® account: You can resume playback from where it was last stopped. This TV allows you to play back files purchased or rented from DivX® Video-On Demand (VOD) services. When you purchase or rent DivX® VOD files on the internet, you will be asked to enter a registration code. Press v while playing the movie to memorize the stopped position. On the Multi View screen, if you select a movie whose stopped position has been memorized, the message “Resume Play?” will appear. Select Yes to resume playback from the last stopped position. NOTE: If you play different content or exit Media Player, the memorized stopped position will be deleted. a In the Media Player Setup menu, press B or b to display DivX® VOD and press OK. b Press B or b to highlight DivX® VOD Registration and press OK. To select a movie from Play List: DivX® VOD While playing a movie, you can select a different movie from the Play List. a Press QUICK to open the Quick Menu. b Press B or b to select Play List and press OK. DivX® VOD Registration DivX® VOD Deregistration c The Movie List will appear. c Press B or b to select a file name. http://vod.divx.com d To close the Movie Viewer: a Press EXIT. File Compatibility See page 85. The DivX® VOD window will appear and you will see the registration code. For details on registration, please visit the DivX® website at Copy the activation file to a memory device and play it on the TV. To deregistration your device: a b c In step 2 above, highlight DivX® VOD Deregistration, and then press OK. A confirmation message will appear. Select Yes and press OK. The DivX® VOD window will appear and you will see the deregistration code. For details on registration, please visit the DivX® website at http://vod.divx.com ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-onDemand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified® to play DivX® and DivX Plus® HD (H.264/MKV) video up to 1080p HD including premium content. 62 CONTROLS AND FEATURES • To play in fast reverse or fast forward directions, press CC or cc during playback. Each time you press the CC or cc, the playback speed will change. • This TV generates original chapter point in 10% increments for 10 chapters in total, that are accessible by using the Number buttons on the remote control. Playing music files (on a DLNA CERTIFIED™ Server or USB device) You can listen to music from a Multi View of available files. Multi View (USB Music) During playback, press z to skip to the beginning of the next chapter. When z is pressed twice in succession, it will repeat two times of above. If z is pressed at the last chapter, playback will skip to the beginning of the next content. Press Z to skip to the beginning of the current chapter. When Z is pressed twice in succession, it will skip to the beginning of the previous chapter. If Z is pressed twice in succession at the first chapter, stop playing the current content and skip to the beginning of the previous content. The Number button is used for direct jump. If the 3 button is pressed, playback will jump to the beginning of 3rd chapter. Even if the playback content has authored chapters, the Number button is used to jump directly to Auto Generated Chapter. a Using Multi Title and Alternative Timelines Multi Title b c You can change the title (It contains same video file) by pressing the RED button. The title is changed cyclically each time the RED button is pressed. Playback will start from start time of selected title every B or b. xxxxxxxxx xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 xxxxxxxxx.mp3 Press B b C c to select a file or folder. PU Pu buttons can be used to page up/down the Multi View when there are more files than will fit onto one screen. When you select a folder, press OK to move to the next layer. Press BACK to move back to the previous layer. With the desired file selected, press OK or c (play) to start playback. NOTE: If you highlight the file without pressing OK, the content is played on a Multi View. When OK is pressed, it is played in full screen mode. DivX Plus HD files may contain up to 100 titles. When the RED button is pressed, it will display the title change window at the bottom on the screen (same as Subtitle or Audio change window). Return NOTE: The page down function on the last page and page up function on the first page are not available. If the content has Authored Chapters, Z / z are using for Authored Chapters. NOTE: • Depending on the content data will not be operated. • The playback speed (CC / cc) may not change depending on the stream. 5/9999 /Folder/select Folder or File d Press v to stop playback. NOTE: • Depending on the file size, it may take some time for playback to begin. • During playback, you can adjust the Sound menu functions from the Quick Menu. NOTE: Depending on the content data will not be operated. During playback • Press W/w to pause. • To resume normal playback, press c (play). PAUSE may not be available depending on the contents, DMC or DMS. • To play in fast reverse or fast forward directions, press CC or cc. Each time you press CC or cc, the playback speed will change. 63 English To playback DivX Plus HD content: English CONTROLS AND FEATURES Other features To set the repeat mode: a Press QUICK to open the Quick Menu. b Press B or b to select Repeat. c Press C or c to select Off, All or 1. Mode Description Off Files in the same folder are played back once. All Files in the same folder are repeatedly played back. 1 The same file is repeatedly played back. d Panel Lock Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c d Press B or b to select Panel Lock. Press C or c to select On. Preferences Press BACK. Recording Setup HDMI CEC Control Setup NOTE: When the TV is used as a DMR, this feature cannot be used. Network Setup TV Guide Selection To select a music file from Play List: Network Device Setup While playing a music file, you can select a different music file from the Play List. Teletext Network Lock Off a Panel Lock Off Press QUICK to open the Quick Menu. b Press B or b to select Play List and press OK. The Music List will appear. c When Panel Lock is On, a reminder will appear when the buttons on the television are pressed. If the standby button is pressed, the television will switch off and can only be brought out of standby by using the remote control. Press B or b to select a file name To display the file status information: a b Press during playback. The information will be displayed on the bottom of the screen. Press again to remove the information. NOTE: The information may not be correctly displayed depending on the contents or DMS. To close the Music Player: a Auto Press EXIT. File Compatibility See page 85. 64 CONTROLS AND FEATURES On Timer The feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time. Programme Timers – digital only This feature will set the television to go to a specific channel at a certain time. It can be used to view a particular programme, or by setting the mode to daily or weekly, can be used to view a series of programmes. a b c d Press B / C c to highlight Programme Timers icon and press OK. Press MENU / C c to highlight Function icon. b Press B / C c to highlight On Timer icon and press OK. c Press B or b to select Enable On Timer and press C or c to select On. On Timer Press b if necessary to select an open timer position, then press OK. The Edit Timer menu will now appear on screen. Enable On Timer On Power On Time 00:00 Repeat Once Input DTV Channel 12 ABC 20 Volume 10:50 Tue, 26 Apr 00:00 Time Until Power On Recording 30 CABC Channel Channel On Enable DTV Clock Press B and b to go through the list adding the details of the programme by using the number buttons and C and c to make selections. Timer Type Done Tue, 26 Apr 2011 Date Start Time 10:51 Repeat Once Set Timer e a Press MENU / C c to highlight TV Programmes icon. Edit Timer English The timers Delete Timer d Press b to select Enable DTV Clock, and then press C or c to select On or Off. e Press B or b to go through the list adding the details of the On Timer by using the number buttons and C and c to make selections. When all of the details have been entered, highlight Set Timer and press OK to save the timer. Power On Time (only for DTV Clock On mode): Set the time you prefer with the number buttons. Repeat (only for DTV Clock On mode): Select the desired On Timer operation (Once, Every Day, MonFri, Mon-Sat, Sat-Sun). Input: Select a video input source (ATV, DTV Ant, EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3 or PC). Channel: Set the channel that will be tuned when the television turns on. The ORANGE programme timer indicator on the front of the television will be lit (see page 82 for details). NOTE: When an external input is selected in the Input field, a channel cannot be selected. Volume: Set the volume that will be applied when the television turns on. Time until Power On (only for DTV Clock Off mode): Set the amount of time from now until the TV turns on using the number buttons (maximum of 12 hours). f 65 Press B or b to highlight Done and press OK. English CONTROLS AND FEATURES To cancel the On Timer: a In the On Timer menu, select Enable On Timer. b Press C or c to select Off. c Press B or b to highlight Done and press OK. Sleep Timer The television can be set to turn itself Off after a certain length of time. a Press MENU / C c to highlight Function icon. b Press B / C c to highlight Sleep Timer icon and press OK. c d e Use the number buttons to set the desired time. For example, to switch the television off in one and a half hours enter 01:30, or press c / C to increase/decrease in steps of 10 minutes. (Maximum time setting is 12 hours) Press EXIT to finish. To cancel the Sleep Timer, enter all zeros for the above setting. Energy Saving Settings Automatic Power Down The TV will automatically turn itself off (standby) after 4 hours, if you do not operate the TV either from the remote control or the TV control panel. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press B or b to select Energy Saving Settings and press OK. d Press B or b to select Automatic Power Down. e Press C or c to select On or Off. NOTE: • This feature is set to On when Location is set to Home. • 1 minute before switching to standby, a Warning message will appear. • When the following features are set, the feature that is set for the nearest time will function. - Automatic Power Down - Sleep Timer - Auto shutdown after 1 hour of inactivity (after power on by On Timer) - No signal auto power off (after 15 minute of no signal) No Signal Power Down The TV will automatically turn itself off after 15 minutes when no signal is detected. You can change the setting to Off for the following purposes: • Low signal strength of analog channel (no signal detection) • Only Audio L/R is connected to external input to listen to music through the TV speakers. a In the Energy Saving Settings menu, press B or b to select No Signal Power Down and press OK. b Press B or b to select the item you want to change and press C or c to select On or Off. NOTE: • Default setting is all On. • A warning message will appear 1 minute before turning off. 66 CONTROLS AND FEATURES English Digital on-screen information To display More Information: When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. a Press QUICK to open the Quick Menu. b Press b to highlight More Information and press OK. On-screen Information icons Information Icon a Press , the information screen will appear giving details of the channel and programme currently being viewed. Display Example 4 REC D+ Audio info Mono Skip Stereo Dual mono 4 Multichannel AD English Now MLB Young’s two-run triple leads AL over NL 6:00- 8:00 AD 18 15 min left HD 16:9 Next News World News and Sports D Dolby Digital D+ Dolby Digital+ When HE-AAC is decoded AD 8:00- 9:00 Audio/Subtitle info Also MLB Young’s two-run triple leads AL over NL Change b Service type (TV, Radio, Text) 6:00 Thu, 11 Oct CHANNEL Z Description Service info Recording info Press B or b to select the “Now”, “Next” or “Also” information guide. Event info The selected information content will appear. Audio Description For Hard of Hearing ●REC Recording + Service info HD, SD Video format (HD, SD) 16:9, 4:3 Video Aspect Teletext c Edit Timer The Daily Politics Timer Type 0, 4 – 18 Parental rating Encrypted Timer info Recording Set Timer Audio track (Mono, Multi) 10:50 Tue, 26 Apr 2 CABC Channel 11:30 - 12:30 Tue, 26 Apr d Subtitle (Single, Multi) To record the next scheduled programme, select Next and press OK. The Edit Timer screen will appear. Recording Reminder Delete Timer The details of the programme will already have been added to the timer. Highlight Set Timer and press OK to save. To indicate that a Recording Timer has been set, a clock icon will be displayed in the Next fields of the information screen. A check mark will appear if the timer is a Reminder Timer. 67 English CONTROLS AND FEATURES Using EPG (Electronic Programme Guide) You can choose the desired EPG system between the Broadcast Guide or MediaGuide that needs a internet connection. Genre selection/searching From the Guide screen, you can use the genre selection and search features. a b In the Guide screen, press QUICK. Press B or b to highlight Genre Colour in the Quick Menu and press OK. Using Broadcast Guide Genre Colour Setup Make sure you selected Broadcast Guide in the Guide Type menu of Initial Setup (see page 18.) This setup can also be done from the Setup / System Setup / Quick Setup menu or Setup / Preferences / Guide Type menu any time. a Select the on-screen Guide by pressing GUIDE, and the Guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear. Movies Colour Setup c With the focus on a particular genre, press the desired coloured button to assign. Four colours will be available to set. Press BACK to go back to the Guide screen. Using MediaGuide MediaGuide is a service of Rovi Corporation. This service is an integrative media guide through the Internet besides television contents and internet contents. You can switch the time scale to 1.5 or 3 hours by pressing the GREEN button. b c d e Press C or c for information on other programmes scheduled for the channel selected. To highlight the first programme in the genre grid, press the RED button. NOTE: • You need to configure a home network before using this feature (see page 13). • Make sure you selected MediaGuide in the Guide Type menu of Initial Setup (see page 18.) This setup can also be done from the Preference / TV Guide Selection menu any time. MediaGuide screen a For details of other programmes currently available, press B and b to scroll up and down the channel list. As channels are selected, details of the programme currently being broadcast will appear. Press C or c to view information for future programmes. Press GUIDE on the remote control, or select Guide in the TV Programmes menu and press OK. The Listings menu in the Secondary Navigation will be selected. Default focus position is the current channel. Remote control key operation :▲ For information on a highlighted programme, press . To set the timer for that programme, press the BLUE button to bring up the Programme Timers menu. :▼ :◄ :► OK wwwwwww wwwwwww f 6:15-7:00pm wwwwwwwwwwwwwwwwwwwwwwww wwwwwwwwwwwwwwwwww Press Pu to advance to the next page, or press PU to go back to the previous page. 68 CONTROLS AND FEATURES • Rovi Corporation and/or its subsidiaries and related affiliates are not in any way liable for the accuracy or availability of the program schedule information or other data in the Rovi Guide system and cannot guarantee service availability in your area. In no event shall Rovi Corporation and/or its related affiliates be liable for any damages in connection with the accuracy or availability of the program schedule information or other data in the Rovi Guide system. • Third party internet services are not provided by Toshiba, may change or be discontinued at any time and may be subject to internet service provider restrictions. Toshiba makes no warranties, representations, or assurances about the content, availability or functionality of third-party content or services. Use of third party internet services may require the creation of a separate account through a computer with internet access and/or payment of one-time and/or recurring charges and membership. Not all third party services may be available on or compatible with this product. In order to experience the full suggested capabilities of this product, fully-compatible devices may be required. If the show is not being aired, you will be directed to the Overview screen with upcoming show times. Primary Navigation menu a In the Secondary Navigation menu, press C to expand the Primary Navigation menu. Primary Navigation Hotlist Press B or b to select Hotlist and press OK. Shows will be listed. Selecting a movie or show will bring you to the overview page. Terms And Conditions Search Press B or b to select Search and press OK. Terms And Conditions Press B or b to select Terms And Conditions. The License Terms And Conditions will be displayed. Search screen 1 2 Terms And Conditions 3 cRecent Searches button. Pressing OK will take you to the Recent Searches screen. dSearch input area displays what you are typing. Pressing Search For will conduct the search and take you to Search Results. eSearch keyboard. NOTE: • Toshiba does not take responsibility for the accuracy of content displayed. • Service Information may not be displayed or there may be little service information displayed depending on the area or the kind of broadcast. • The MediaGuide can only be used when your TV is connected to the internet. • Starting and operation of this service may take time. • Software update may be needed in order to use this service. • This service does not support all languages. • MediaGuide is a service of Rovi Corporation. • During use of the MediaGuide usage information will be notified to the Rovi server to ensure continued efficient operation of the guide. 69 English This will tune to live TV for the particular show. English CONTROLS AND FEATURES Digital settings – parental control Parental Setup In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked in digital mode. These can then only be accessed with a security code PIN. The Parental Control feature allows you to block programmes according to their rating levels. If a PIN has been set, you will need to enter it before adjusting the level. Parental PIN Setup a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight System Setup icon and press OK. c a In the DTV Settings menu, press B or b to select Parental Control and press OK. b Use C or c to choose an option (None or an age setting (4-17 or 4-18 depending on the Country setting)). Parental Control Parental Setup Press B or b to select DTV Settings and press OK. To view blocked programmes, enter the PIN. To reactivate the Parental Control, turn the TV off and then on again. System Setup Menu Language English Country Germany Network Lock Ant/Cable Auto Tuning You can use the Network Lock feature to prevent the Web browser from launching. When this feature is set to On, PIN input will be necessary to use network functions. ATV Manual Tuning DTV Manual Tuning DTV Settings This feature will be grayed out until a PIN is set. Quick Setup d None Press B or b to highlight Parental PIN Setup and press OK. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press B or bto select Network Lock. DTV Settings Channels Subtitle and Audio Parental PIN Setup Preferences Parental Control Recording Setup Local Time Setting e HDMI CEC Control Setup Standby Channel Update Off Dynamic Scan Off Network Setup TV Guide Selection Network Device Setup Using the number buttons enter a four digit number. Once entered you will be prompted to confirm by entering again. PIN Setting New PIN: * * * * Confirm PIN: The PIN number is now set. Teletext d Off Panel Lock Off Press C or c to select On. To unlock the Network: a If the PIN code has been set, when Auto Tuning and Reset TV are executed, entering the PIN will be necessary. “0000” is not acceptable. 70 Auto Network Lock Select Off in step 4 above. CONTROLS AND FEATURES English Digital settings – Channel Options Skip channels This feature allows you to set channels that will be skipped when Pu or PU are used to tune. Selecting favourite channels a From the Quick Menu / Channel Options menu, it is possible to create a list of the digital channels that are watched most. Press LIST / C c to select the Favourite Channel list. b In the Quick Menu, press b to select Channel Options and press OK. c Press c repeatedly to highlight the skip (8) box. d Press OK to select. A tick will appear in the box. e Repeat steps 1 through 4 for other channels. f Press EXIT. a Select a channel you want to add to your favourite list. b Press QUICK to open the Quick Menu. c Press b to select Channel Options and press OK. d Press c to select the favourite list (Fav.). Select the channel you want to skip in your channel list. Channel Options NOTE: Skipped channels cannot be selected by Pu or PU but still be accessed by direct number entry (when tuned a 8 icon will be displayed in the banner to indicate as a skipped channel). Fav. e Press OK to select the ones required. A tick will appear in the box as they are selected. Locking channels f Repeat steps 1 through 5 for other channels. g When all favourites have been selected, press EXIT. Locking Channels stops the viewing of digital channels, and they can only be accessed by entering the PIN. a Favourite Channel List a Press LIST to display Channel List. Each time you press C or c, All Channels, TV Channels, Radio channels, Text channels or Favourites is selected in order. b b In the Quick Menu, press b to select Channel Options and press OK. c Press c repeatedly to highlight the lock ( d Press OK to select. A tick will appear in the box. Press C or c to select Favourites. The number of favourites available depends on how many lists have been created. Channel List Favourites 6 M6 9 W9 11 NT1 ) box. If a PIN has already been set, PIN entry will be required to set the locked channels. e Repeat steps 1 through 4 for other channels. f Press EXIT. g 31 PARIS PREMIERE 34 AB1 51 ITV1 c Select the channel you want to lock in your channel list. Press B or b to highlight a channel and press OK to watch. 71 From this point on, when any of the channels in the Locked Channel list are selected, the PIN must be entered before they can be accessed. English CONTROLS AND FEATURES Digital settings – other settings Subtitles In digital mode, this feature will show subtitles on the screen in the selected language provided they are being broadcast. a In the DTV Settings menu, press B or b to select Subtitle and Audio and press OK. b Press b to select Subtitle Display and press C or c to select On or Off. Common Interface The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider. a Insert the CAM and card into the Common Interface Slot, following the instructions provided with the CAM. A box will appear on screen to confirm that the CAM has been inserted. b Press MENU / C c to highlight Setup icon. c Press B / C c to highlight System Setup icon and press OK. d Press B or b to select DTV Settings and press OK. e Press B or b to select Common Interface and press OK. Subtitle and Audio Subtitle Display c Off Subtitle Type Normal Primary Subtitle Language English Secondary Subtitle Language English Audio Type Normal Primary Audio Language English Secondary Audio Language English Press B or b to select Primary Subtitle Language or Secondary Subtitle Language and press C or c to select an option. The SUBTITLE button can be used to select subtitle on or off for the current channel only and to select the subtitle language if more than one subtitle is available. Audio languages f NOTE: • Software update of a CI Plus CAM may occur automatically if instigated by the broadcaster. This could cause the cancellation of any Reminders/Recordings during this process. • Some CI or CI+ CAM may not be supported. • CI+ operation is not guaranteed except for Canal Ready DTT services on suffix FC models. This feature allows a programme or film to be viewed with a choice of soundtrack language, provided multiple language tracks are being broadcast. a In the Subtitle and Audio menu, press B or b to select Audio Type and press C or c to select Normal or For Hard of Hearing. b Press B or b to select Primary Audio Language or Secondary Audio Language and press C or c to select an option. Details of the CAM should now be available. If more than one soundtrack is available, use the s button to select between them. 72 CONTROLS AND FEATURES System Information and Reset TV Searching for New Software System Information If preferred, software upgrades can be searched for manually using Search for New Software. This feature can be used to check the version of software currently installed. When in DTV mode, it includes additional diagnostic information such as signal strength, signal quality, centre frequency, modulation, etc. a In the System Setup menu, press B or b to select Software Upgrade and press OK. b Press B or b to select Search for New Software. c Press OK. The television will automatically start searching for a software upgrade, the progress bar will move along the line. a b In the System Setup menu, press B or b to select System Information. Press OK to display the System Information. System Information TOSHIBA 2012 SEARCHING FOR NEW SOFTWARE Searching for a new software upgrade for this TV. 6.8.05.1 Jan 19 2012 - 53. 5. 73. 5 MBOOT Version : xxxxxxxx 48 %... CH 31 WEAK If an upgrade is found, the television will automatically start downloading. If not, a screen will appear stating that an upgrade is unavailable. c Network Upgrade TOSHIBA may offer upgrades for the TV’s software in the future. The TV’s software is upgraded via the Network. d AVERAGE STRONG CH 25 GOOD CH 33 GOOD CH 67 GOOD For information about the signal quality of a particular multiplex, press B or b to select that multiplex. Press OK for a screen showing detailed technical information about the selected multiplex. Before downloading software: Configure your TV to connect to the Internet. Reset TV NOTE: While the upgrade is being performed, you will not be able to watch the TV. Selecting Reset TV will reset all TV settings, including saved channels, to their original factory values. a In the System Setup menu, press B or b to select Software Upgrade and press OK. a b Press B or b to select Network Upgrade and press OK. b NOTE: If the network is not available, a warning message will appear. c Press OK to select. A screen will appear warning that all settings will be lost. Press OK to continue. When the set powers back on, the Quick Setup screen will appear. Press OK to advance the setup and perform an auto tune. (See “Quick Setup” section on page 16.) The TV software upgrade will start when download succeeds. Software Licences The licences for the software used in this television are available for viewing. a In the System Setup menu, press B or b to select Reset TV. In the System Setup menu, press B or b to select Software Licences and press OK. A screen will appear displaying all the licensing information required for the televisions software. 73 English Software Upgrade and Licences English CONTROLS AND FEATURES PC Settings Sampling Clock Adjusting the Sampling Clock alters the number of pulses per scan, this will clear vertical lines on the screen. Horizontal and Vertical Position Connect the PC (as shown in the ‘Connecting a computer’ section) and ensure that a picture is showing on the television screen. The picture position may now be adjusted to suit personal preference. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. Press B or b to select Display Settings and press OK. d Press B or b to select PC Settings and press OK. Auto Format On 4:3 Stretch Off Picture Position Press B or b to select an option and press C or c to adjust the settings. PC Settings Horizontal Position 0 Vertical Position 0 Clock Phase 0 Sampling Clock b Press B or b to select Sampling Clock. c Press C or c to adjust until the picture clears. Use Reset to return all items to the original factory settings. a In the Display Settings menu, press B or b to select PC Settings and press OK. b Press B or b to select Reset and press OK. NOTE: When a PC is connected using HDMI, none of these functions will be available. PC Settings e In the Display Settings menu, press B or b to select PC Settings and press OK. Reset c Display Settings a The screen is disrupted momentarily when adjusting PC Settings. This is not a sign of malfunction. The default settings and adjustment ranges may vary depending on the input signal format. 0 Reset Clock Phase The Clock Phase matches the PC signal with the LCD display. Adjusting this can clear horizontal stripes and picture blur. a In the Display Settings menu, press B or b to select PC Settings and press OK. b Press B or b to select Clock Phase. c Press C or c to adjust until the picture clears. 74 CONTROLS AND FEATURES Labeling video input sources These input labels are shown in the input selector. You can label video inputs according to the devices you have connected to the TV. See page 9 for a detailed image showing recommended connections. Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket. Alternatively, press the external source selection button o until the picture from connected equipment is shown. a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press B or b to select AV Connection. Input selection Preferences Use the Input Selection window if the television does not switch over automatically. HDMI CEC Control Setup a TV Guide Selection Network Setup By pressing o on the remote control or TV, a list will appear on screen showing all inputs and external equipment. Press o on the remote control Teletext Press and hold p / o on the TV Inputs Inputs TV DTV Ant TV 1 Network Device Setup 1 Auto Network Lock Off Panel Lock Off AV Connection d e Press OK to display the AV Connection menu. 2 2 HDMI 1 HDMI 1 HDMI 2 HDMI 2 HDMI 3 HDMI 3 AV Connection PC PC Input Labeling ATV Digital Audio Output HDMI® displays equipment connected to Input HDMI on the back or side of the television. f Press B or b to highlight Input Labeling and press OK. Press B or b to select Input Labeling and press OK. Input Labeling PC displays a computer connected to Input RGB/PC on the back of the television. Input Label EXT 1 ------- EXT 2 HDMI 1 HDMI 2 HDMI 3 PC g h 75 Press B or b to select the item you want to label, and then press C or c to select --, Amplifier, Cable, DVD, Game, PC, Recorder or Satellite. Repeat step 7 for other video inputs. English Input selection and AV connections English CONTROLS AND FEATURES Using HDMI CEC Control Digital Audio Output When connecting a surround sound amplifier to the digital audio output (Sony/Philips Digital Interface Format [S/PDIF]), the following options can be selected or adjusted. a b This is a new feature that uses CEC technology and allows you to control Toshiba HDMI CEC Control compatible devices from the television remote control via HDMI connection (page 11). In the Preferences menu, press B or b to select AV Connection and press OK. When the Enable HDMI CEC Control item in the HDMI CEC Control Setup menu is set to On, individual functions also set to On will be activated. Press B or b to select Digital Audio Output. AV Connection Enable HDMI CEC Control Input Labeling Digital Audio Output c Press OK to display Digital Audio Output menu and press B or b to select an option. Audio Format Press C or c to select PCM or Auto. PCM: This mode outputs PCM format to the digital audio output socket. Auto: This mode outputs Dolby Digital (if available) or PCM to the digital audio output socket. Dolby Digital S Dolby Digital Dolby Digital Plus S Dolby Digital MPEG S PCM HE-AAC S Dolby Digital a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press B or b to select HDMI CEC Control Setup and pres OK. d Press b to select Enable HDMI CEC Control and press C or c to select On. HDMI CEC Control Setup Audio Delay Press C or c to select Auto or Manual. Enable HDMI CEC Control On TV Auto Power On Auto Standby On Amplifier Control Initial Speaker Setting This mode automatically adjusts the audio timing to meet the video timing. NOTE: The time lag might be large between the image and sound depending on the connected equipment (amplifier etc.). In that case, select Manual. Manual:You can manually adjust the audio signal timing to meet the video signal timing. On TV Speakers Auto: NOTE: If you set Enable HDMI CEC Control to Off, all other items will be grayed out. TV Auto Power The TV Auto Power setting allows the television to be automatically switched on if a HDMI CEC Control device is turned on. Delay Adjustment Press C or c to adjust the audio signal timing (0 – 250ms) to meet the video signal timing. NOTE: • This feature is grayed out when Audio Delay is in Auto. • A time lag will occur when the video signal or audio signal is changed. Adjust the timing accordingly. • When adjusting the timing, turn down the volume of the AV equipment used as far as possible. Depending on the equipment, noise etc. may occur when the signal is changed. • Depending on the connected equipment (amplifier, etc.), adjustment may not be possible. • When the optical digital output setting (AutotPCM) is changed, it may be necessary to adjust the timing again. • Do not use other than for audio output from the AV amplifier, etc. (Malfunction may occur) a In the HDMI CEC Control Setup menu, press b to highlight TV Auto Power. b Press C or c to select On or Off. Auto Standby When Auto Standby is enabled, the television, when switched off, will automatically switch off (standby mode) all connected HDMI CEC Control equipment. a In the HDMI CEC Control Setup menu, press b to highlight Auto Standby. b Press C or c to select On or Off. 76 CONTROLS AND FEATURES When Amplifier Control is set to on/off the connected HDMI CEC Control amplifier. a In the HDMI CEC Control Setup menu, press b to highlight Amplifier Control. b Press C or c to select On or Off. Initial Speaker Setting The Initial Speaker Setting allows to select TV speakers or Amplifier speakers. a In the HDMI CEC Control Setup menu, press b to highlight Initial Speaker Setting. b Press C or c to select TV Speakers or Amplifier. HDMI CEC Control one touch play When connected equipment is switched on, HDMI CEC Control will automatically detect the television through the input selection. If the television is in standby, it will be switched on automatically. These functions can be enabled or disabled from the HDMI CEC Control Setup (see page 76). HDMI CEC Control input source selection If a HDMI CEC Control device with HDMI switching capability (e.g. AV amplifier) is connected to the HDMI input, you can select another HDMI CEC Control device that is connected to the master HDMI device on the input source list. a NOTE: • Even if the equipment is showing a menu, the television may automatically show the input source. • This feature depends on the connected equipment and television state. Press o and a list will appear on screen showing available input sources. HDMI CEC Control system standby If the television is turned off (standby mode), the television will send a message to turn off (standby mode) all of the HDMI CEC Control devices connected to the television. b Press b to select the input source that the HDMI CEC Control devices are connected. c Press c and a second selection screen will appear showing all connected HDMI CEC Control equipment. Inputs TV 1 2 HDMI 1 1 DVD 2 VCR/DVR 3 CBL/SAT 4 GAME/TV 5 AUX These functions can be enabled or disabled from the HDMI CEC Control Setup (see page 76). NOTE: This feature depends on the connected equipment and television state. HDMI 2 HDMI 3 PC d Press B or b to select the desired input source, and then press OK. 77 English NOTE: • These functions depend on the device connected. • If you select the HDMI CEC Control input source from the popup window, some HDMI CEC Control devices may automatically turn on. • If the HDMI cable from connected equipment is changed, Enable in the HDMI CEC Control Setup menu may need to be reset to On. • If you change the HDMI lead to a connected device or change an HDMI device setting, reset the Enable HDMI CEC Control item on the HDMI CEC Control Setup menu from Off to On. Amplifier Control English TEXT SERVICES Text services Navigating pages using Auto This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext, if available. List will save your four favourite pages. If Fastext is available, four coloured titles will appear at the base of the screen. To access one of the four given subjects, press the relevant coloured button on the remote control. Selecting modes For further information on your particular text system(s), see the broadcast text index page or consult your local Toshiba dealer. The text character set will be automatically chosen by the language setting in the Setup menu. Navigating pages using LIST a Press MENU / C c to highlight Setup icon. b Press B / C c to highlight Preferences icon and press OK. c Press B or b to select Teletext, and then press C or c to select Auto or List. The four coloured choices at the bottom of the screen are numbers – 100, 101, 102 and 103, which have been programmed into the television’s memory. To view these pages, press the relevant coloured buttons. To change these saved pages, press the relevant coloured button and enter the 3 digit number. This number will change in the top left of the screen and in the coloured highlight. Press OK to save. Whenever OK is pressed, all four page numbers showing at the bottom will be saved and the previous ones will be lost. Preferences Recording Setup NOTE: The video signal from the external inputs (EXT-1 and EXT-2) is not saved. HDMI CEC Control Setup Network Setup TV Guide Selection If OK is not pressed, the selection will be forgotten when the channel is changed. Network Device Setup Teletext Auto Network Lock Off Panel Lock Off Other pages may be viewed by entering the 3 digit page number – but DO NOT press OK or these pages will be saved. Text information The TEXT button To view text services press TEXT. Press again to superimpose the text over a normal broadcast picture and again to return to normal viewing. Channels cannot be changed until text is cancelled. The first text page shown will be the initial page. Any text page can be accessed by entering the 3 digit page number using the numbered buttons, pressing the coloured buttons or pressing PU to advance to the next page and Pu to go back to the previous page. Sub-pages The pages on the screen will dynamically update as subpages are received. If you open a page containing sub-pages, the sub-pages are automatically displayed in sequence. To quit automatic subpage change, press C or c. Once selected, the sub-page you are viewing will be highlighted and, as the television loads any additional subpages, the colour of the numbers will change, indicating that these pages have been loaded. These sub-pages will remain available to view until another page is chosen or, in normal TV mode, the channel is changed. 78 TEXT SERVICES English Control buttons Below is a guide to the functions of the remote control text buttons. k To display the index/initial page: Press k to access the index/initial page. The one displayed is dependant on the broadcaster. TEXT To display a page of text: Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing. Channels cannot be changed until this has been done. A To reveal concealed text: To discover the solutions on quiz and joke pages press the A button. B To hold a wanted page: At times it is convenient to hold a page of text. Press B and B will appear in the top left of the screen. The page will be held on screen until the button is pressed again. C To enlarge the text display size: Press C once to enlarge the top half of the page, press again to enlarge the bottom half of the page. Press again to revert to normal size. D To temporarily erase the text screen: Press D once to erase the text screen temporarily. To recall the text screen, press the button again. To display news flashes: Select the news flash page for the chosen text service (see the index page of text service). The news flashes will be displayed as and when they are broadcast. Remember to cancel text before changing channels - press the TEXT button twice. 79 Questions and Answers Below are the answers to some of the most common queries. Sound Question Answer Why is there no sound or picture? Check the television is not in standby mode. Check the mains plug and all mains connections. Why is there a picture but no sound? Check all lead connections. No sound or unacceptable format sound may be received. Check the volume has not been turned down or that sound mute has not been selected. Check shared audio settings. Why is the soundtrack in English when The programme is currently being broadcast with an English soundtrack a different audio language has been only. selected? Why is there incorrect or no sound when Press s to ensure the hard of hearing option has not been selected. in DTV mode? There is a picture, but why is there little When using an external source, for instance, a poor quality video tape, if or no colour? there is little or no colour, improvements may sometimes be achieved. The colour is factory set to Auto to automatically display the best colour system. To check that you have the best colour: a With the external source playing, select Colour System from the System Setup menu. System Setup Menu Language English Country Germany Colour System b What else can cause a poor picture? Picture English PROBLEM SOLVING Auto With C or c choose between Auto, PAL, SECAM, NTSC 4.43 or NTSC 3.58. Interference or a weak signal. Try a different television station. Manual Fine Tuning may help. a b Select the ATV Manual Tuning menu. Highlight the station and press OK. Then press c to select Manual Fine Tuning. Using B or b adjust to get the best picture and sound. Press OK and then EXIT. ATV Manual Tuning Manual Fine Tuning 1 I A C 2 0 Why doesn’t the video/DVD being played show on screen? Make sure the media recorder or DVD player is connected to the television as shown on page 9, and then select the correct input by pressing o. Why are there vertical stripes on the screen when in PC mode? The Sampling Clock may need adjustment. Select PC Settings from the Display Settings menu, highlight Sampling Clock and adjust until the lines clear. Why are there horizontal stripes and/or The Clock Phase may need adjustment. Select PC Settings from the blurred images on the screen when in Display Settings menu, highlight Clock Phase and adjust until the picture PC mode? clears. 80 PROBLEM SOLVING Picture English Question Why are the colours wrong when an NTSC source is played? Answer Connect the source via a SCART lead and play. Select Colour System from the Setup menu. a Set the Colour to Auto and exit. b Go to the Picture menu and adjust the tint. Why don’t the controls of the television Check that Panel Lock is not On. work? Why doesn’t the remote control work? Check that batteries aren't exhausted or inserted incorrectly Why is the digital channel locked? The channel has been locked in Channel Options (see ’Digital settings – Channel Options’ section). Why are some of the digital subscription Your subscription needs upgrading. Contact your service provider. channels unavailable? What is DVB-T? Digital Video Broadcast via an aerial/antenna. What is DVB-C? Digital Video Broadcast via a cable connection. How are DTV radio channels selected? Select from All Channel List (LIST button). What can be done if the PIN number has Use the Master PIN code of 1276, then change to a number of your choice. been forgotten? Select Parental PIN Setup from the DTV Settings menu to enter PIN. Ensure that no-one else can use the Master PIN by removing the Owner’s Manual. General Why when digital subtitles have been Subtitles are not currently being transmitted by the broadcaster. selected are they not showing on screen? Why are there problems with analogue text? Good performance of text depends on a good strong broadcast signal. This normally requires a roof or loft aerial. If the text is unreadable or garbled, check the aerial. Go to the main index page of the text service and look for the User Guide. This will explain the basic operation of text in some detail. If further information is needed on how to use text see the text section. Why is a page number visible at the top Text has been selected but Teletext information is currently unavailable on of the screen but no text? the current source. Why don’t the devices connected via HDMI operate properly? Make sure to use cables with the HDMI logo Why don’t the HDMI CEC Control devices work? When the connected HDMI CEC Control device does not work correctly after you have changed the settings of the device, turn off your television and unplug the power cord, and then plug and turn on again. Unplug the HDMI cable of the HDMI CEC Control device and lead again. Why is the HDMI CEC logo still showing when the equipment has been disconnected? If the HDMI CEC Control device is disconnected, the logo will disappear after approximately one minute. (see page 10). Some early HDMI equipment may not work properly with the latest HDMI TV products, due to new standard adoption. Why don’t the networked devices work? The LAN cables are not connected properly or at all. Connect all cables (see page 13). Make sure your network address is set up correctly (see page 39). Why doesn’t the wireless network work? Check that the AP is powered on. Why doesn’t the Media Player feature operate? Make sure that devices are connected correctly. Incorrect behaviour may occur with a USB Hub connection. Check your network setup if using DLNA CERTIFIED™ Server. 81 English PROBLEM SOLVING Question Answer Why doesn’t the USB HDD work? Your country/area may not support the USB HDD function. Why isn't Skype launched? Check that the recommended video camera (page 51) is connected to the TV. Ensure the network cable connection (page 13). Check the Network setting of TV. Turn off the TV and unplug the power cord. After 1 minute, plug the power cord in and turn on the TV. Why can't the Skype account be signed If you have no Skype Name, create a Skype Name in Create an account. in? If you forgot password, visit www.skype.com and confirm the password. What do the LEDs on the front of the television indicate? Check the table below. General LED indication LED 1 LED 2 Condition LED-1 LED-2 Green Orange Power ON Programme Timer is set Green Red Power ON Programme Timer (Recording) or Recording is working Green OFF Power ON Programme Timer is NOT set Red Orange Power OFF (Standby) Programme Timer is set Red Red Power OFF (Standby) Program Timer (Recording) or Recording is working Red OFF Power OFF (Standby) Programme Timer is NOT set Orange Orange Active Standby Programme Timer is set Orange OFF Active Standby Programme Timer is NOT set Other problems If your TV’s problem is not addressed in this Questions and Answers section or the recommended solution has not worked, do one of the following: 1 Turn off your TV. After 30 seconds, turn it on. 2 Turn off the TV and unplug the power cord. After 1 minute, plug the power cord in and turn on the TV. 3 Perform the Reset TV function in the System Setup menu. 82 INFORMATION English Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No. 1 R 6 Ground 11 Signal name NC 2 G 7 Ground 12 DDC Data H-sync 3 B 8 Ground 13 4 NC* 9 +5V 14 V-sync 5 Ground 10 Ground 15 DDC Clock * NC = not connected Acceptable PC signals through the PC terminal The PC input on this TV only accepts signal formats which are compliant with VESA-DMT as shown in the table below. Since some PCs input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur; incorrect display, false format detection, picture position failure, blur, or judder. In this case, set the monitor output format on your PC to conform to a signal in the table below. Format Resolution V. Frequency H. Frequency Pixel Clock Frequency VGA 640 × 480 59.940Hz 31.469kHz 25.175MHz 72.809Hz 37.861kHz 31.500MHz 75.000Hz 37.500kHz 31.500MHz 56.250Hz 35.156kHz 36.000MHz 60.317Hz 37.879kHz 40.000MHz 72.188Hz 48.077kHz 50.000MHz 75.000Hz 46.875kHz 49.500MHz 60.004Hz 48.363kHz 65.000MHz 70.069Hz 56.476kHz 75.000MHz 75.029Hz 60.023kHz 78.750MHz 59.995Hz 47.396kHz 68.250MHz 59.870Hz 47.776kHz 79.500MHz 74.893Hz 60.289kHz 102.250MHz 1280 × 800 59.810Hz 49.702kHz 83.500MHz 1360 × 768 60.015Hz 47.712kHz 85.500MHz WXGA+ 1440 × 900 59.887Hz 55.935kHz 106.500MHz SXGA 1280 × 1024 60.020Hz 63.981kHz 108.000MHz 75.025Hz 79.976kHz 135.000MHz 60.000Hz 67.500Hz 148.500MHz SVGA XGA WXGA 1080p 800 × 600 1024 × 768 1280 × 768 1920 × 1080p 83 VESA Standard (DMT) English INFORMATION Acceptable video or PC signals through the HDMI terminals The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur; incorrect display, false format detection, picture position failure, blur, or judder. In this case, set the monitor output format on your PC, HDMI or DVI device to conform to a signal in the table below. Format Resolution V. Frequency H. Frequency Pixel Clock Frequency 480i 720 × 480i 59.940/60.000Hz 15.734/15.750kHz 27.000/27.027MHz 576i 720 × 576i 50.000Hz 15.625kHz 27.000MHz 480p 720 × 480p 59.940/60.000Hz 31.469/31.500kHz 27.000/27.027MHz 576p 720 × 576p 50.000Hz 31.250kHz 27.000MHz 1080i 1920 × 1080i 59.940/60.000Hz 33.716/33.750kHz 74.176/74.250MHz 1080i 1920 × 1080i 50.000Hz 28.125kHz 74.250MHz 720p 1280 × 720p 59.940/60.000Hz 44.955/45.000kHz 74.176/74.250MHz 720p 1280 × 720p 50.000Hz 37.500kHz 74.250MHz 1080p 1920 × 1080p 59.940/60.000Hz 67.433/67.500kHz 148.352/148.500MHz 148.500MHz 1080p 1920 × 1080p 50.000Hz 56.250kHz 1080p 1920 × 1080p 24.000Hz 27.000kHz 74.250MHz VGA 640 × 480 59.940/60.000Hz 31.469/31.500kHz 25.175/25.200MHz 72.809Hz 37.861kHz 31.500MHz 75.000Hz 37.500kHz 31.500MHz 56.250Hz 35.156kHz 36.000MHz 60.317Hz 37.879kHz 40.000MHz 72.188Hz 48.077kHz 50.000MHz SVGA XGA WXGA SXGA 800 × 600 1024 × 768 1280 × 768 75.000Hz 46.875kHz 49.500MHz 60.004Hz 48.363kHz 65.000MHz 70.069Hz 56.476kHz 75.000MHz 75.029Hz 60.023kHz 78.750MHz 59.995Hz 47.396kHz 68.250MHz 59.870Hz 47.776kHz 79.500MHz 74.893Hz 60.289kHz 102.250MHz 1360 × 768 60.015Hz 47.712kHz 85.500MHz 1280 × 1024 60.020Hz 63.981kHz 108.000MHz 75.025Hz 79.976kHz 135.000MHz 84 VESA Standard INFORMATION English Media Player Supported Format Media Player Photo Media Format JPEG File Extention .jpg .jpeg Video codec Audio codec JPEG USB DMS yes yes – USB Data compatibility: JPEG Exif ver 2.2 Maximum viewable resolution: • JPEG 15360 × 8640 (Base-line) 1024 × 768 (Progressive) • BMP 9600 × 6400 Maximum number of files: 1000 / folder yes no – DMS Data compatibility: JPEG Exif ver 2.2 Maximum viewable resolution: 4096 × 4096 Maximum number of files: 1000/folder – MPO BMP .mpo .bmp Note MPO yes BMP no NOTE: Some files may not be played depending on file size. Movie AVI .avi MPEG-2 MPEG-4 part2 H.264 (MPEG-4 AVC) MPEG-1/2 Layer2 yes MPEG-1/2 Layer3 Dolby Digital (AC-3) L-PCM ADPCM MPEG-2/4 LC-AAC MPEG-4 HE-AAC no USB Maximum number of files: 1000 / folder Maximum viewable resolution: • Motion-JPEG:640 × 480 • Other:1920 × 1080 MPEG-1 Video MPEG-1/2 Layer3 yes no MPEG-2 Video yes MPEG-1/2 Layer2 Dolby Digital (AC-3) L-PCM yes Maximum video size: Unlimited MPEG-2 Video MPEG-1/2 Layer2 yes yes H.264(MPEG-4 AVC) VC-1(WMV9) MPEG-1/2 Layer3 yes Dolby Digital (AC-3) L-PCM MPEG-4 LC-AAC MPEG-4 HE-AAC no MPEG-2 VOB .vob MPEG-1 Video MPEG-2 Video MPEG-1/2 Layer2 yes MPEG-1/2 Layer3 Dolby Digital (AC-3) L-PCM no MOV .mov H.264 (MPEG-4 AVC) MPEG-4 part2 MPEG-1/2 Layer3 MPEG-2/4 LC-AAC MPEG-4 HE-AAC yes no MP4 .mp4 .m4v H.264 (MPEG-4 AVC) MPEG-4 part12,14 MPEG-1/2 Layer3 MPEG-2/4 LC-AAC MPEG-4 HE-AAC yes yes ASF .asf .wmv VC-1 (WMV9) WMA7/8/9 Std WMA9 Pro yes no DivX Xvid MPEG-2 PS MPEG-2 TS .mpg .mpeg .ts .trp .tp 85 DMS Maximum video resolution: 1920 × 1080 Maximum number of file:1000 / folder Maximum video size: Unlimited NOTE: Some files may not be played. English INFORMATION Media Player Movie Media Format File Extention Audio codec USB DMS MPEG-1/2 Layer2 yes MPEG-1/2 Layer3 Dolby Digital (AC-3) PCM ADPCM no MPEG-1 Video MPEG-2 Video MPEG-4 part2 H.264 (MPEG-4 AVC) MPEG-1/2 Layer2 yes MPEG-1/2 Layer3 Dolby Digital (AC-3) L-PCM MPEG-2/4 LC-AAC MPEG-4 HE-AAC no .flv .swf Sorenson H.263 (FLV1) H.264 (MPEG-4 AVC) MPEG-1/2 Layer3 MPEG-2/4 LC-AAC L-PCM ADPCM yes no .3gp MPEG-4 part2 H.264 (MPEG-4 AVC) MPEG-2/4 LC-AAC AMR yes no JPEG L-PCM ADPCM yes no DivX .divx .div DivX 3,4,5,6 Xvid .xvid Xvid MKV .mkv Flash Video (FLV1) 3GPP Motion JPEG .avi .mp4 .mkv Music Video codec MP3 .mp3 – MPEG-1/2 Layer-3 yes yes MP4 .m4a – MPEG-2/4 LC-AAC yes yes WMA .wma WAV LPCM .wav – WMA7/8/9/ Std yes yes – WMA9 Pro yes no – LPCM ADPCM MPEG-1/2 Layer-3 WMA7/8/9/ Std WMA9 Pro yes no no yes – Note USB Maximum number of files: 1000 / folder Maximum viewable resolution: • Motion-JPEG: 640 × 480 • Other: 1920 × 1080 Maximum video size: Unlimited DMS Maximum video resolution: 1920 × 1080 Maximum number of files: 1000 / folder Maximum video size: Unlimited NOTE: Some files may not be played. NOTE: Even if contained in above table, it may not be reproduced depending on contents. 86 INFORMATION • • • • • • • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. This product contains Adobe® Flash® Player software under license from Adobe Systems Incorporated. Copyright © 1995-2009 Adobe Systems Incorporated. All rights reserved. Adobe and Flash are trademarks of Adobe Systems Incorporated. DivX®, DivX Certified®, DivX Plus® HD and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft. This product includes technology owned by Microsoft Corporation and can not be used or distributed without a license from Microsoft Licensing, GP. Content owners use Windows Media digital rights management technology (WMDRM) to protect their intellectual property, including copyrights. This device uses WMDRM software to access WMDRM-protected content. If the WMDRM software fails to protect the content, content owners may ask Microsoft to revoke the software's ability to use WMDRM to play or copy protected content. Revocation does not affect unprotected content. When you download licenses for protected content, you agree that Microsoft may include a revocation list with the licenses. Content owners may require you to upgrade WMDRM to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade. • DLNA™, DLNA CERTIFIED™, DLNA CERTIFIED Logo are trademarks, service marks, or certification marks of the Digital Living Network Alliance. • Rovi and Rovi Guide are trademarks of Rovi Corporation and/or its subsidiaries. The Rovi Guide system is manufactured under license from Rovi Corporation and/or its subsidiaries. • DVB is a registered trademark of the DVB Project. • THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (AVC VIDEO) AND/ OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM • THIS PRODUCT IS LICENSED UNDER THE MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD ("MPEG-4 VIDEO") AND/OR (ii) DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA,L.L.C. SEE HTTP://WWW.MPEGLA.COM • MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. • Hybrid TV Standard is implemented according to ETSI TS 102 796 v1.1.1. • Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries. • RealD and the RealD logo are trademarks of RealD Inc. 87 English License Information English INFORMATION Cleaning the screen and cabinet… Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. Disposal… The following information is only for EU-member states: Disposal of products The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres. The black bar indicates that the product was placed on the market after August 13, 2005. By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please contact your local city office or the shop where you purchased the product. Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste. If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol. By participating in separate collection of batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health. For more detailed information about the collection and recycling programmes available in your country, please contact your local city office or the shop where you purchased the product. 88 INFORMATION Receiving systems DVB-T Broadcast systems/channels UK UHF 21-68 Broadcast systems/channels PAL-I UHF UK21-UK69 France VHF 05-10 (VHF 01-05) UHF 21-69 PAL-B/G UHF E21-E69 VHF E2-E12, S1-S41 Germany VHF 05-12 UHF 21-69 SECAM-L UHF F21-F69 VHF F1-F10, B-Q Austria VHF 05-12 UHF 21-69 SECAM-D/K UHF R21-R69 VHF R1-R12 32RL / 32SL 40RL / 40SL 78 W 98 W Standby power consumption (approx.) 0.3 W Energy Efficiency Class 32RL / 32SL 40RL / 40SL A+ A+ On-mode power consumption* (approx.) 32RL / 32SL 40RL / 40SL 34.1 W 50.1 W Average annual energy consumption** (approx.) 32RL / 32SL 40RL / 40SL 47.3 kWh/y 69.5 kWh/y * Tested in accordance with IEC 62087-BD Ed. 2.0:2008 in default settings. Switzerland VHF 05-12 UHF 21-69 ** Operating 4 hours a day and 365 days a year. Italy VHF 05-12 (D,E,F,G,H,H1,H2) UHF 21-69 Spain UHF 21-69 Dimensions (approx.) 32RL / 32SL 51 cm (H) 74 cm (W) 21 cm (D) 40RL / 40SL 61 cm (H) 92 cm (W) 22 cm (D) (Height dimension includes foot stand) Nederlands VHF 05-12 UHF 21-69 Greece Power consumption (approx.) VHF 05-12 UHF 21-69 DVB-C Broadcast systems Weight (approx.) 32RL / 32SL 9.5 kg 40RL / 40SL 14.5 kg Operating condition Temperature 5°C - 35°C (41°F - 94°F) Humidity 20 - 80% (non-condensing) Wireless connection • Standard: IEEE 802.11a/b/g/n • Frequency Range: 5.15-5.35 GHz, 5.475.725 GHz, 5.725-5.850 GHz, 2.400-2.4835 GHz • Security: WEP64/128, TKIP, AES, WPA/ WPA2-PSK, WPS, None Supplied accessories • Remote control CT-90420 (for RL series) Remote control CT-90382 (for SL series) 2 batteries (AAA, IEC R03) • ‘P’ Clip/Screw (for TV mounting) See page 5. • 4 spacers for wall mounting Optional accessories • USB HDD : HDTC610EK3B1, HDTC610EL3B1, HDTC610EW3B1 • Skype camera : TALK-7291 • Colour analyser : Toshiba TPA-1 Video Input PAL, SECAM, NTSC 3.58/4.43 External connections EXT 1 Input/Output 21-pin SCART RGB, A/V input AV out, TV out EXT 2 Input RCA jacks RCA jack RCA jacks Y, PB/CB, PR/CR Video (Y is shared) Audio L + R (shared) HDMI 1/2/3 Input HDMI® compliant HDCP compliant PC Input Mini D-sub 15-pin Analogue Digital Audio Output (S/PDIF) Optical LAN port RJ-45 USB 1/USB 2 port Media Player Interface version: USB 2.0 USB class: Mass Storage File system: FAT16 and FAT32 Headphone socket 3.5 mm stereo Stereo A2, Nicam 2 carrier system Visible Screen Size (approx.) 32 40 80 cm 102 cm Screen resolution ( H × V pixels ) 32RL / 32SL 40RL / 40SL 1920 × 1080 1920 × 1080 Display 16:9 Sound output (at 10% distortion) Main: 10 W + 10 W Specification is subject to change without notice. 89 English Specifications and accessories © TOSHIBA Television Central Europe Sp. z o.o. All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland T1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project