Whirlpool WFW8300S User's Manual
Add to my manuals
1 Pages
Whirlpool WFW8300S is a front-loading washer designed to make laundry day a breeze. With its 120-volt, 60 Hz motor, this washer has 15- or 20-amp fused electrical supply and a time-delay fuse or circuit breaker. It's recommended to have a separate circuit for optimal performance.
In terms of dimensions, the Whirlpool WFW8300S measures 27 inches (68.6 cm) in width, 50¹⁄₄ inches (127.6 cm) in height, and 29¹⁄₄ inches (74.3 cm) in depth. It has a spacious capacity, allowing you to wash large loads of laundry with ease.
advertisement
®
Front Loading Washer
OVERALL DIMENSIONS PRODUCT MODEL NUMBERS
WFW8300S
Electrical: 120-volt, 60 Hz, AC-only,
15- or 20-amp, fused electrical supply. A timedelay fuse or circuit breaker and separate circuit is recommended.
50
¹⁄₄
"
(127.6 cm)
27"
(68.6 cm)
36"
(91.4 cm)
RECESSED AREA AND CLOSET INSTALLATIONS
For closet installation, with a door, the minimum ventilation openings in the top and bottom of the door are required (view 2).
Louvered doors with equivalent air ventilation openings in the top and bottom are acceptable.
3"
(7.6 cm)
48"
(122 cm)
48 in.
2
(310 cm 2 )
Washer on Pedestal
38" min.
(96.5 cm)
29
¹⁄₄
"
(74.3 cm)
Recommended installation spacing for cabinet installation
For cabinet installation, with a door, the minimum ventilation openings in the top are required.
7" (17.8 cm)
7" (17.8 cm)
9"
(22.9 cm)
24 in.
2
(155 cm 2 )
1"
(2.5 cm)
29
¹⁄₄
"
(74.3 cm)
A
4"
(10.2 cm)
B
A. Side view - closet or confined area
B. Closet door with vents
3"
(7.6 cm)
1"
(2.5 cm)
UNDERCOUNTER INSTALLATION
Dimensions shown are the recommended spacing.
2" (5 cm)
36" min.
(91.4 cm)
1"
(2.5 cm)
27"
(68.6 cm)
DRAIN SYSTEM OPTIONS
1"
(2.5 cm)
27"
(68.6 cm)
48"
2
*
(310 cm
2
)
24"
2
*
(155 cm 2 )
Standpipe drain system - wall or floor (view A & B)
The standpipe drain requires a minimum diameter standpipe of 2” (5 cm). The minimum carry-away capacity can be no less than 17 gal. (64 L) per minute.
The top of the standpipe must be at least 30” (76.2 cm) high and no higher than
96 in. (2.4 m) from the bottom of the washer.
1"
(2.5 cm)
Stacked Washer and Dryer
3" (7.6 cm)
1"
(2.5 cm)
29
¹⁄₄
"
(74.3 cm)
4"
(10.2 cm)
3" (7.6 cm)
1" (2.5 cm) 5
¹⁄₄
"**
(13.3 cm)
Laundry tub drain system (view A)
The laundry tub needs a minimum
20 gal. (76 L) capacity. The top of the laundry tub must be at least
30” (76.2 cm) above the floor.
4"
(10.2 cm)
29
¹⁄₄
"
(74.3 cm)
1"
(2.5 cm)
1"
(2.5 cm)
27"
(68.6 cm)
1"
(2.5 cm)
12" (30.5 cm)
72"
(182.9 cm)
1"***
(2.5 cm)
27"
(68.6 cm)
1"***
(2.5 cm)
*Min. top and bottom air openings for closet door.
**External exhaust elbow requires additional space.
***Wall, door and floor molding may require additional spacing.
Floor drain system (view B)
The floor drain system requires a siphon break that may be purchased separately.
The siphon break must be a minimum of 28”
(71 cm) from the bottom of the washer.
Additional hoses might be needed.
30" min.
(76.2 cm) 26" min.
(66 cm)
30" min.
(76.2 cm)
A B
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
A B
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10071770
11-07-06
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement