Kenroy Home 32401AMB Instructions / Assembly

 MODEL: 32401
PACKING DIAGRAM
L CARDBOARD
.CA TITLE 20
FINIAL, HARP &
RUBBER WASHE
ARDBOARD
SOCKET ASSEMBLY
STYROFOAM: 12 KGS. = ;
~~ CARDBOARD
LAMP BODY
STYROFOAM: 12 KGS—— —>
ASSEMBLY INSTRUCTIONS
O- FINAL READ AND SAVE THESE INSTRUCTIONS
RUBBER READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO
= WASHER ASSEMBLY.
THIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES TO
ASSEMBLE.
MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED.
UNPACK THE LAMP
YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE
PACKAGE: FINIAL, RUBBER WASHER, SHADE, HARP, SOCKET
ASSEMBLY AND LAMP BODY. TO PROTECT THE FINISH, PLACE
ALL PARTS ON A SOFT SURFACE.
| ASSEMBLE THE LAMP
1. CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A
SMOOTH, FLAT SURFACE. LINE UP ALL OF THE PARTS
SHADE ACCORDING TO THE ASSEMBLY DIAGRAM.
2401SHAMB
(REPLACEMENT 2. SCREW SOCKET ASSEMBLY TO TOP OF THE LAMP BODY.
PART) 3. SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE
ARP TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER.
LWHARP—8.5—CH 4. PLACE SHADE ONTO HARP, THEN SECURE WITH RUBBER
(REPLACEMENT WASHER AND FINIAL.
PART)
5. INSTALL A 150 WATT MAXIMUM MEDIUM BASE TYPE “A”
3—WAY BULB (NOT INCLUDED) INTO THE SOCKET.
6. PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT
SOCKET SWITCH.
cocker PTE BULB REPLACEMENT
ASSEMBLY ARP HOLDER 1. BEFORE REPLACING THE BULB, BE SURE THAT THE SHADE
AND BULB ARE COOL AND LAMP IS UNPLUGGED.
2. UNSCREW EXISTING BULB FROM SOCKET AND REPLACE
WITH A NEW BULB. PLUG POWER SUPPLY CORD BACK INTO
OUTLET.
TROUBLE SHOOTING
1. IF YOUR LAMP DOES NOT LIGHT, CHECK PLUG AT THE
OUTLET. MAKE SURE THE PLUG IS FULLY AND PROPERLY
INSERTED INTO THE POWER OUTLET.
BODY 2. IF LAMP STILL DOES NOT LIGHT, UNPLUG FROM OUTLET.
CHECK THE BULB FOR A BROKEN FILAMENT. REPLACE BULB IF
NECESSARY, PLUG IN LAMP AND TURN IT ON.
3. IF THE LAMP STILL DOES NOT LIGHT, PLEASE CONTACT
OWER YOUR DISTRIBUTOR OR PLACE OF PURCHASE.
CORD
IMPORTANT SAFETY INSTRUCTIONS
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS
WIDER THAN THE OTHER) AS A FEATURE TO REDUCE THE
Ï RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A
POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT
FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL
DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE
AVAILABLE PARTS ARE: WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY
LWHARP—8.5—CH (HARP) INSERTED. DO NOT ALTER THE PLUG.
32401SHAMB (SHADE)
03/2014 32401AMB INSTRUCTIONS