Kenroy Home 32576DWAL Instructions / Assembly

 MODEL: 325/76
PACKING DIAGRAM
CARDBOARD >
STYROFOAM: 12 KGS: o
7 SHADE
CARDBOARD
CA TITLE 20
SOCKET ASSEMBLY
FINIAL, HARP &
RUBBER WASHE
STYROFOAM: 12 KGS.
ASSEMBLY INSTRUCTIONS
- я МАС READ AND SAVE THESE INSTRUCTIONS
READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO
_ RUBBER ASSEMBLY.
WASHER
THIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES TO
ASSEMBLE.
MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED.
UNPACK THE LAMP
YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE
PACKAGE: FINIAL, RUBBER WASHER, SHADE, HARP, SOCKET
ASSEMBLY AND LAMP BODY. TO PROTECT THE FINISH, PLACE ALL
PARTS ON A SOFT SURFACE.
ASSEMBLE THE LAMP
1. CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH,
FLAT SURFACE. LINE UP ALL OF THE PARTS ACCORDING TO THE
SHADE ASSEMBLY DIAGRAM.
(REPLACEMENT 2. PULL THE EXCESS POWER CORD THROUGH THE BASE.
PART) 3. SCREW SOCKET ASSEMBLY TO TOP OF THE LAMP BODY.
HARP 4. SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE
ARPS TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER.
(REPLACEMENT
PART) 5. PLACE SHADE ONTO HARP, THEN SECURE WITH RUBBER
WASHER AND FINIAL.
6. INSTALL A 150 WATT MAXIMUM MEDIUM BASE TYPE "A" 3—WAY
BULB (NOT INCLUDED) INTO SOCKET.
SOCKET
7. PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT
SWITCH SWITCH.
SOCKET
ASSEMBLY ARP HOLDER
BULB REPLACEMENT
1. BEFORE REPLACING THE BULB, BE SURE THAT THE SHADE
AND BULB ARE COOL AND LAMP IS UNPLUGGED.
A 2. UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A
NEW BULB. PLUG POWER SUPPLY CORD BACK INTO OUTLET.
TROUBLE SHOOTING
1. IF YOUR LAMP DOES NOT LIGHT, CHECK PLUG AT THE
OUTLET. MAKE SURE THE PLUG IS FULLY AND PROPERLY
INSERTED INTO THE POWER OUTLET.
LAMP
BODY 2. IF LAMP STILL DOES NOT LIGHT, UNPLUG FROM OUTLET.
CHECK THE BULB FOR A BROKEN FILAMENT. REPLACE BULB IF
POWER NECESSARY, PLUG IN LAMP AND TURN IT ON.
CORD
3. IF THE LAMP STILL DOES NOT LIGHT, PLEASE CONTACT YOUR
|
DISTRIBUTOR OR PLACE OF PURCHASE.
IMPORTANT SAFETY INSTRUCTIONS
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS
WIDER THAN THE OTHER) AS A FEATURE TO REDUCE THE RISK
OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED
OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN
AVAILABLE PARTS ARE: THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT,
32576SHDWAL (SHADE) CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH AN
HARP8 (HARP) EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED. DO
NOT ALTER THE PLUG.
05/2014 32576DWAL INSTRUCTIONS