Laura Ashley WCT022 Instructions / Assembly

Assembly Instructions

Chantilly Wall Light # WCT022

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THIS INSTRUCTION.

Leaf Holder

Screw

Lock Nut

Porcelain Flower

Fig.1

Mounting Screw

Mounting Plate

Screw

Outlet Box Lock Nut

Fixture Wire

Big Porcelain Flower

Small Porcelain Flower

Candle Tube

Wire Nut

House Grounding Wire

Green Grounding Screw

Fixture Grounding Wire

Bobeche

Socket

Bolt Nut

Back Plate

1. Thread two screws through the mounting plate, then secure them with two lock nuts. Adjust the

length of the screws if necessary.

2. Attach the mounting plate to the outlet box by using two mounting screws.

3. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections

using the wire nuts:

---Connect the black wire from the fixture to the black wire from the power source.

---Connect the white wire from the fixture to the white wire from the power source.

---Attach the fixture grounding wire to the mounting plate with the green grounding screw. Then

connect it to the house grounding wire with a wire nut.

Carefully tuck the wires back into the outlet box.

4. Attach the back plate to the mounting plate by inserting the screws, then secure it with two bolt nuts.

5. Attach the bobeches and candle tubes onto the sockets, then install bulbs (not included). Note

relamping label at socket area or packaging for maximum allowed wattage.

6. Unscrew the lock nuts from the leaf holders. Then secure the big porcelain flowers onto the big leaf

holders of the fixture. Secure the small porcelain flowers onto the small leaf holders of the fixture.

(See Fig.1)

7. Turn on the power at the main fuse or circuit breaker box.