advertisement
▼
Scroll to page 2
of 8
English for U.S.A. Quick Reference Guide ■ Accessories The following accessories are supplied with this product. PUSH Remote control Batteries (2) (AAA, R03, UM-4) AM loop antenna Indoor FM antenna VIDEO AUX input cover YPAO microphone Preparing the remote control 1 3 1 Take off the battery compartment cover. 2 Insert the two supplied AAA batteries into the battery case, following the polarity markings. Be sure to aim the remote control directly at the remote control sensor on this unit during operation. within 20 feet (6 m) 2 ■ 3 Snap the battery compartment cover back into place. Items necessary for connection Speakers Ex. Ex. Front speaker Ex. Center speaker Surround speaker, surround back speaker, and presence speaker Ex. Active subwoofer • Use speakers with an impedance of at least 6Ω. 4Ω speakers can also be used as the front speakers. For more information on speaker impedance, refer to page 3. • If you are using a CRT monitor, we recommend that you use magnetically shielded speakers. • Prepare at least two front speakers. The priority of the other speakers is as follows: 1 Two surround speakers 2 One center speaker 3 One (or two) surround back speaker (s)/presence speakers External components Cable • Cables for connecting external components (may differ depending on the components you are connecting) • Speaker cables (a quantity to match the number of speakers you are connecting) • Audio pin cable (for subwoofer) TV Playback device such as BD (Blu-ray Disc)/DVD players -1- Connect and install as follows the first time you use this unit. See the following explanations for the connections for each number. TV 3 2 BD/DVD player (recorder) 4 This unit Front speaker R Front speaker L Subwoofer Surround speaker R 1 Center speaker 6.1 Surround back speaker 1 Surround speaker L 7.1 7.1 Surround back speaker L Surround back speaker R 7.1 Connect when using with 7.1-channel speaker layout. Place the surround back speakers (L/R) 12 in (30 cm) or more away from each other. 6.1 Connect when using with 6.1-channel speaker layout. Place the surround back speaker behind the listening position. 1 Connect the speakers 2 Connect a TV 3 Connect playback device such as BD/DVD players and recorders 4 Connect the AC power cable 5 Set up the speaker parameters automatically (YPAO) -2- 1 Connect the speakers Front speaker R L Surround speaker R L 7.1 Connect when using with 7.1-channel speaker layout. 6.1 Connect when using with 6.1-channel speaker layout. Surround back speaker R L 7.1 7.1 6.1 Caution: • Remove the AC power cable of this unit from the power outlet before connecting the speakers. • Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined) cable into the “+” (positive, red) terminal on this unit and the speakers, and the other cable into the “-” (minus, black) terminal. • Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, “CHECK SP WIRES!” will appear on the front panel display when this unit is switched on. • This unit is configured for 8Ω speakers at the factory setting. When connecting 6Ω speakers, configure the speaker impedance setting of this unit to 6Ω. When this unit is configured for 6Ω speakers, 4Ω speakers can also be used as the front speakers. For more information on setting the speaker impedance, refer to “Changing speaker impedance” in the Owner’s Manual. SPEAKERS HDMI 2 HDMI 3 HDMI 4 FRONT HDMI 5 CENTER SURROUND SURROUND BACK/BI-AMP MOTE SINGLE +12V 0.1A MAX. GER OUT CENTER ND SUR.BACK SUBWOOFER TI CH INPUT SINGLE AUDIO OUT FRONT ZONE2 OUT SURROUND CENTER SUR.BACK PRE OUT 1 SUBWOOFER OOFER 2 Center speaker • When connecting the presence speakers, refer to “Presence speaker connection” in the Owner’s Manual. • This unit can connect speakers that support Bi-amp connection for front speakers. Refer to “Bi-amp connection” in the Owner’s Manual for the details. Subwoofer Connecting speakers 2 FR ON T 3 Connecting the banana plug Tighten the knob, and then insert the banana plug into the end of the terminal. 1 4 FR ON T 1 Remove approximately 10 mm (0.4 in) of insulation from the ends of the speaker cables, and twist the bare wires of the cables together firmly so that they will not cause short circuits. 2 Loosen the speaker terminals. 3 Insert the bare wire of the speaker cable into the gap on the side of the terminal. 4 Tighten the terminal. Banana plug Connecting the subwoofer 1 2 Connect the subwoofer input jack to the SUBWOOFER 1 or 2 jack on this unit with an audio pin cable. Set the subwoofer volume as follows. Volume: Set to approximately half volume (or slightly less than half). Crossover frequency (if available): Set to maximum. VOLUME MIN MAX CROSSOVER/ HIGH CUT MIN MAX Subwoofer examples -3- 2 Connect a TV If your TV has multiple inputs, connect with the following priority (A to C). ARC HDMI HDMI A When using an HDMI compatible TV. H HDMI 1 ANTENNA COMPONENT VIDEO COMPONENT VIDEO FM SIRIUS HDMI (BD/DVD) HDMI OUT DOCK REMOTE GND AM PR PR PR PB PB Y Y IN COMPONENT VIDEO OUT 75 PB PR B When using a component VIDEO VIDEO PB Y V +12V 0.1A MA MONITOR OUT Y video input-compatible TV. TRIGGER OUT VIDEO OPTICAL COAXIAL COAXIAL (CD) ( TV ) A 1 AV A 2 AV A 3 AV AV 4 A OPTICAL AV 5 A AV 6 A A AV OUT FRONT AUDIO 1 SURROUND SU MULT MULTI L I CH IN AUDIO 2 VIDEO C When using a TV compatible V Video input to this unit is output to a TV using output jacks of the same kind. When connecting to a non-HDMI compatible TV Connect to the TV using the same type of connection that you used to connect to the playback device, and change the inputs on your TV to match that of the playback device you are using for playback. If the playback device and TV are equipped with different types of analog video jacks, this unit will convert the video signal to component video signal, or vice-versa, according to the type of video input jacks used by the TV. For more information on video signal conversion, refer to “Connecting a TV monitor” in the Owner’s Manual. When connecting to an HDMI compatible TV Video signal such as component video and video received by this unit is converted to HDMI and output to the TV. Just select HDMI input on the TV to view video from any external source connected to this unit. You can change the resolution and aspect ratio used when converting to HDMI to suit your requirements. Input Output HDMI HDMI COMPONENT VIDEO TV COMPONENT VIDEO VIDEO with video input only. Input Output HDMI input COMPONENT VIDEO COMPONENT VIDEO Component video input VIDEO VIDEO TV Component video input Video input VIDEO Video input Through Converted Through Converted Listening to TV audio To playback TV audio on this unit, connect the TV audio output to this unit. When using an HDMI compatible TV that supports Audio Return Channel functions and / or HDMI Control functions (e.g., Panasonic VIERA Link), you can enjoy the TV sound on this unit as follows: Connect the following input jacks, matching the audio output jacks on your TV. When viewing your TV, select the appropriate input source on this unit. ARC OPTICAL When using a TV that supports the Audio Return Channel function and HDMI Control function The audio / video output from the unit to the TV and audio output from the TV to the unit are possible using a single HDMI cable. The input source is switched automatically to match operations carried out on the TV, and that makes TV sound control easier to use. For the connections and settings, refer to “Using the HDMI Control function” in the Owner’s Manual. HDMI OUT DOCK O COMPONENT VIDEO SIRIUS Audio output PR PB VIDEO Y O OPTICAL COAXIAL COAXIAL (CD) ( TV ) AV 1 A A 2 AV A 3 AV AV 4 Audio output from TV Input jack on this unit Optical digital output AV1 or AV4 OPTICAL AV 5 A Coaxial digital output AV2 or AV3 Analog output One of AV5, AV6, AUDIO1, AUDIO2, and VIDEO-AUX HDMI Audio Return Channel (Described in the right column) HDMI OUT When using a TV that supports HDMI Control functions When HDMI Control functions are enabled on the unit, input source can be switched automatically to match operations carried out on the TV. For the connections and settings, refer to “Using the HDMI Control function” in the Owner’s Manual. ✽ Connecting to AV4 allows you to playback TV audio just by pressing the TV under SCENE key. -4- 3 Connect playback device such as BD/DVD players and recorders If your playback device has multiple audio/video outputs, connect with the following priority (A to D) to enjoy a higher quality sounds and images. A When playback device is capable HDMI HDMI of HDMI output HDMI COMPONENT VIDEO B When playback device is capable of component video output (with optical digital audio output) PR ARC PB (BD/DVD) HDMI OUT DOCK COMPONENT VIDEO COMPONENT VIDEO FM OPTICAL PR PR PR PB PB PB Y Y SIRIUS HDMI 2 HDMI 1 ANTENNA Y REMOTE GND AM PR IN O OUT 75 PB VIDEO VIDEO V Y C When playback device is capable of component video output (with coaxial digital audio output) MONITOR OUT PR of video output (with analog audio output) only TRIGGER OUT L PB R O Y COAXIAL C D When playback device is capable +12V 0.1A MAX. Y COMPONENT VIDEO OPTICAL COAXIAL COAXIAL (CD) ( TV ) AV 1 AV 2 A 3 AV A 4 AV OPTICAL AV 5 A 6 AV A AV OUT FRONT AUDIO 1 AUDIO 2 SURROUND SUR.BACK SU MULT MULTI L I CH INPUT C VIDEO V AUDIO L R • When playback, select the corresponding input source to which the jack is connected. • At the default settings, input sources and sound programs are preset on the SCENE keys. When a playback device is connected to HDMI 1 pressing BD/DVD under SCENE key selects the HDMI 1 input. When a playback device is connected to AV3, pressing CD under SCENE selects the AV3 input. The input source and sound program preset on the SCENE key can be changed. For more information on the SCENE function, refer to “Changing input settings with a single key (SCENE function)” in the Owner’s Manual. • If necessary, you can connect components that cannot be connected using the above methods, such as devices that output video from component video output jacks and audio from analog output jacks. Refer to “Connecting external components” in the Owner’s Manual for details. 4 Connect the AC power cable SPEAKERS To the power outlet SURROUND BACK/ BACK/BI-AMP K BI-AMP AC power cable SINGLE EXTRA SP ZONE2/ PRESENCE SINGLE SUR.BACK PRE OUT CENTER 1 SUBWOOFER 2 -5- 5 Set up the speaker parameters automatically (YPAO) When all connections are complete, adjust the configuration, sizes, and volume balance of the speakers to provide an optimal sound field. This unit is equipped with a Yamaha Parametric Room Acoustic Optimizer (YPAO) function that adjusts the speaker balance automatically with a simple procedure. When using YPAO, a test tone will be output from the speakers for approximately 3 minutes to measure acoustics. Be aware of the following when using YPAO. • The test tone is output at high volume. Refrain from using this function at night when it may be a nuisance to others. • Take care that the test tone does not frighten small children. YPAO operations can be viewed on the front panel display or TV screen. TV display is used here to explain operation. 1 Check the following before using YPAO. This unit Subwoofer • The headphones are removed. • The power is turned on. • Volume is set to approximately half, and the cross-over frequency (if present) is set to maximum. TV • This unit is connected to the TV correctly. • The power is turned on. • The video input to which the video output from this unit has been selected. 2 VOLUME MIN MAX CROSSOVER/ HIGH CUT MIN MAX Subwoofer examples Place the supplied YPAO microphone at ear height in your listening position. YPAO microphone When positioning the microphone, we recommend that you use equipment that allows you to adjust the height (such as a tripod) as a microphone stand. When using a tripod, use the tripod screws to fix the microphone in place. 3 Press RECEIVER A on the remote control to switch this unit on. 4 Connect the YPAO microphone to the YPAO MIC jack on the front panel. “Mic On. View ON SCREEN” appears on the front panel display, and then the display at right appears on the TV screen. MAIN ZONE YPAO MIC ZONE2 ZONE CONTROL YPAO microphone This completes preparation. To achieve more accurate results, take note of the following when measuring acoustics. • It takes approximately 3 minutes to accurately measure acoustics. Keep the room as quiet as possible while acoustics are measured. • Wait in a corner of the room, or leave it entirely, while acoustics are measured to avoid creating an obstruction between the speakers and the YPAO microphone. Continues to the next page -6- 5 Use the cursor B/C to select the “Measure” and press ENTER to start measurement. MAIN ZONE 2 CODE SET SOURCE RECEIVER RECEIVER A HDMI 1 2 5 V-AUX V VAUX 3 4 AUDIO 1 2 2 3 4 5 6 MULTI MULT L I DOCK TUNER SIRIUS [ A ] A AV The following display appears if measurement finishes without any problems. 1 Result Displays the results of automatic acoustics measurement and sets the equalizer (parametric equalizer) to provide a unified sound field. For details, refer to “Reviewing and reloading the automatic setup parameters” in the Owner’s Manual. Save/Exit CATEGORY CAT A EGORY FM AM INFO MEMORY MOVIE MUSIC PRESET ENHANCER SUR. DECODE SLEEP Applies the result to the speaker setup and finishes the automatic measurement. STRAIGHT PURE DIRECT SCENE BD DVD TV DISPLAY A TOP MENU POP-UP MENU HOLD Use the cursor B/C to select “Save/Exit” and press ENTER. 1 2 3 5 6 7 9 0 10 TV INPUT MUTE Use the cursor D/E to select “SAVE” and press ENTER. When the display at left appears, the YPAO setup is complete. 8 Press ENTER. YPAO is automatically terminated. Disconnect the YPAO microphone. MAIN ZONE YPAO MIC ZONE2 ZONE CONTROL You can use the following functions with this unit. For details on the operations, refer to the Owner’s Manual on the supplied CD-ROM. Adjustment for various parameters to match your listening environment - Sound quality control with a prametric equalizer <PEQ Select> - Easy listening at low volumes <Adaptive DRC> - Adjusting volume between input sources <Volume Trim> External device connection and playback - Connections and playback from BD/DVD players (recorders), TV audio, and other devices - Playback from an iPod/iPhone - Playback from a Bluetooth device FM/AM tuner - Manual preset tuning etc. -7- MUTE REC TV VOL 7 RADIO VOLUME ENTER RETURN 6 CD ON SCREEN OPTION ON SCREEN Note If a problem occurs, an error message or report is displayed either during or after acoustic measurement. Refer to “When an error message is displayed during measurement,” or “When a warning message is displayed after measurement” in the Owner’s Manual to resolve the problem and measure acoustics with YPAO again. TUN./CH TV CH 4 8 ENT ENTER, Cursor Operation guide A B C D MAIN ZONE PURE DIRECT YPAO MIC ZONE2 ZONE CONTROL INFO MEMORY PRESET TUNING/CH CATEGORY FM AM VOLUME SCENE BD DVD PHONES INPUT TONE CONTROL TV CD PROGRAM RADIO VIDEO AUX STRAIGHT SILENT CINEMA HDMI IN G VIDEO L AUDIO R F A Switches this unit between on and standby mode This unit switches between on and standby mode every time you press this key. A B Choose an input source to listen to The name of the selected input source appears on the front panel display. MAIN ZONE 2 CODE SET VOL. HDMI1 L SL SBL SW C SOURCE RECEIVER R SR SBR HDMI C Switches between input settings BD/DVD TV CD RADIO Input 3 5 V-AUX 1 4 2 2 3 4 5 6 MULTI DOCK TUNER SIRIUS [ A ] AV Sound field program HDMI1 AV4 AV3 TUNER 2 AUDIO You can switch input sources and sound field programs with a single key. SCENE 1 1 Drama STRAIGHT STRAIGHT STRAIGHT CATEGORY FM AM INFO MEMORY MOVIE MUSIC PRESET - Pressing and holding this key allows you to store input sources/sound field programs. - Press this key when this unit is in standby mode to switch on the unit. F TUN./CH ENHANCER SUR. DECODE SLEEP D Adjusts the volume level STRAIGHT PURE DIRECT SCENE The current volume level is displayed on the front panel display. BD DVD TV CD RADIO C VOLUME D MUTE E VOL. Volume -18.5dB L SL SBL SW C OPTION ON SCREEN R SR SBR ENTER E Mutes the sound RETURN DISPLAY The indicator blinks while the sound is muted. F Select sound field programs and sound decoders Front panel TOP MENU POP-UP MENU REC HOLD Remote control MOVIE B Description Selects sound field programs optimized for viewing movies, dramas, and sports. 1 2 3 5 6 7 9 0 10 4 8 PROGRAM MUSIC Selects sound field programs optimized for appreciating music. ENT TV SUR. DECODE Selects surround decoders such as Dolby Pro Logic II. INPUT TV VOL TV CH MUTE STRAIGHT STRAIGHT PURE DIRECT PURE DIRECT Switches to Straight decoding mode for stereo/multi-channel playback without using a sound field program. Switches to Pure Direct mode for faithful reproduction of audio. - When playing back compression artifacts, press ENHANCER to turn on the Compressed Music Enhancer mode. G Adjusting high/low-frequency sound (Tone control) 1 Press TONE CONTROL to select “Treble” or “Bass.” TONE Treble 2 VOL. +0.5dB SW C R L SL SR SBL SBR Press PROGRAM l / h to adjust the output level in those frequency ranges. - You can set the tone control for speakers and headphones separately. Connect the headphones when adjusting the headphone tone control. - If you set an extreme tone balance, sounds may not match those from other channels. ©2010 Yamaha Corporation -8- YC513B0/QREN1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement