Location:

Identity

™

6700

Tub/Shower System

Specification Submittal

Model Numbers Specification

 6700

Identity Tub/Shower System

Modifications

Tub/shower system powered by the Temptrol ® pressurebalancing valve. Valve body includes adjustable stop screw to limit handle turn. Components made from metal and nonmetallic materials, plated in standard polished chrome finish.

 -CHKS

 -IPS

 -LP

 -LR

Loop handle

Lever handle

 -OP 13" oval plate

 -REB-TRM Rebuild trim kit

 -REV

 -STN

 -TRM

Integral check stops - for use in installations where a positive shut-off device is used downstream of mixing valve

1/2" female IPS connections

Reverse coring, hot on right, cold on left, for back to back installations

Satin Nickel finish

Trim only, valve not included

 -X Integral service stops - allows water shutoff at valve for service

Compliance

-ASME A112.18.1/CSA B125.1

Warranty

Limited Lifetime - to the original end purchaser in consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete warranty information.

Note: Append appropriate -suffix to model number.

Dimensions

A

B

C

D

E

F

G

Measurements

3-1/2", 89 mm

2-7/8", 73 mm

Shower Valve Hole Size

Min. Ø 3", 76 mm

Max. Ø 4", 102 mm

3-1/2", 89 mm

Rough-in

2-3/8" ± 1/2", 60 mm ± 13 mm

Ref. 42", 1067 mm

Ø 6-3/8", 162 mm

FF

Notes:

1) All dimensions measured from nominal rough-in (see E as reference).

2) Dimensions subject to change without notice.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621

Copyright © 2016 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-1535 REV 0 ■ 030816