CONTENTS

 

1.

Product   Features………………………………..………………..….2

 

2.

Product   Specifications……..………………………………………3  

3.

Overall   Performance………………………………………………..4

 

4.

Protection………………………………………………………………..4

 

5.

Dimensions……….……………………………………………………..5

 

6.

Cables   &   Connectors………………………………………………..5

 

7.

Precautions………………………………………………………………6  

8.

Information………………………………………………………………7  

9.

Installation………………………………………………….……………7  

 

10.

Troubleshooting….………………………………………………….8

 

1

 

1. Product Features a. Stable and reliable b. Cosmic black casing c. Supports single 12v output for higher power usage d. Supports ATX 12v 2.3 version e. Supports Dual/Quad Core CPUs f. All cables are sleeved g. Built in 1 x 12cm extremely silent automatically thermal fan speed controlled blue LED fan h. Dimensions:

550W: 150mm / 5.91” (W) x 140mm / 5.51” (L) x 86mm / 3.39” (H)

650W & 700W:150mm / 5.91” (W) x 158mm / 6.22” (L) x 86mm / 3.39” i.

Heavy duty protections including OVP (Over Voltage Protection)

,OPP (Over Power Protection), UVP (Under Voltage Protection) and SCP (Short Circuit Protection) j. Double Forward Converter Design

2

 

2. Product Specifications:

a. AC input voltage: 115/230V b. AC input frequency: 60Hz/50Hz c. Operating temperature: The power supply should be operated in an ambient temperature of 0

°

C to 40

°

C d. DC output:

Model  

AC   Input  

DC   Output   Voltage  

Max   Output   Current  

Combined   power  

Total   Power  

Model  

AC   Input  

DC   Output   Voltage  

Max   Output   Current  

Combined   power  

Total   Power  

Model  

AC   Input  

DC   Output   Voltage  

Max   Output   Current  

Combined   power  

Total   Power  

ATX ‐ BT550W    

115 ‐ 230VAC   ,   8A/4A   ,   50 ‐ 60HZ  

+3.3V

 

16A  

100W  

+5V  

16A  

+12V

40A  

480W

 

 

‐ 12V

0.3A

 

  +5Vsb

2.5A

 

3.6W

  12.5W

 

 

550W  

ATX ‐ BT650W  

115 ‐ 230VAC   ,   8A/4A   ,   50 ‐ 60HZ  

+3.3V

 

17A  

100W  

+5V  

16A  

+12V

49A  

588W

 

650W  

 

‐ 12V

0.3A

 

 

+5Vsb

2.5A

 

3.6W

  12.5W

 

 

ATX ‐ BT700W  

+3.3V

17A  

 

115 ‐ 230VAC   ,   8A/4A   ,   50 ‐ 60HZ  

100W  

+5V  

17A  

+12V

53A  

636W

 

700W  

 

‐ 12V   +5Vsb  

0.3A

  2.5A

 

3.6W

  12.5W

 

3

 

3. Overall Performance:

a. Total output power: full load at normal line input voltage. b. Hold up time: 17ms at full load normal line input voltage. c. Switching frequency: 50KHz at normal line input. d. Stability: +/- 5% for 24KHR after warm up.

4. Protection:

a. Under voltage protection.

If an under voltage fault occurs, the supply will latch all DC outputs into a shutdown state when +12V, +5V & +3.3V outputs under 60% of its maximum value. b. Over voltage protection

Output

+12 VDC

+5 VDC

+3.3 VDC

Minimum

13.4

5.70

3.70

Nominal

15.0

6.3

4.2

Maximum

17

7.0

4.8

Unit

Volts

Volts

Volts

An output short circuit is defined as any output impedance of less than 0.1 ohms. The power supply shall shut down and latch off for shorting the +3.3

VDC, +5 VDC or +12 VDC rails. Shorts between main output rails and

+5VSB shall not cause any damage to the power supply. The power supply shall either shut down and latch off or fold back for shorting the negative rails. +5VSB must be capable of being shorted indefinitely, but when the short is removed, the power supply shall recover automatically or by cycling

PS_ON#. The power supply shall be capable of withstanding a continuous short-circuit to the output without damage or overstress to the unit.

4

The power supply will be shut down and latch off when output power is110%~150%

5. Dimensions:

150mm x 140mm x 86mm (5.9” x 5.5” x 3.4”) W x L x H

650W & 700W: 150mm x 158mm x 86mm (5.9” x 6.2” x 3.4”) W x L x H

6. Description of Connectors:

 

5

 

7. Precautions:

Warning! To avoid the risk of electrical shock, unauthorized persons heed the following precautions: a. Do not open the power supply case! b. Before turning on, please make sure that the input voltage of the red RMS side switch on the power supply corresponds to the power voltage given in your environment.

(USA & Canada: 115V; Europe, Central and South America: 230V). c. Avoid exposure to humidity.

6

8. Information:

Thank you for purchasing a high-quality Apevia product! Please visit our website at http://www.apevia.com

for complete warranty information and future support for your product. For the latest release information, or should you have any questions, please visit our website, or contact us at:

Support Phone Number: 1-909-718-0789

Support E-mail: [email protected]

9. Installation:

 

7

 

10. Troubleshooting:

If power supply fails to operate properly, please check the following before requesting for an RMA: a. Please make sure the power supply and power cord are connected properly. b. Please make sure the power cord is plugged into the power socket. c. Please make sure the power supply I/O button is switched to the “ I ” position. d. Please check if all the connectors (motherboard, floppy and peripherals) are connected properly. e. Please allow 5 seconds interval before turning the power on again when power supply is switched off manually (setting the I/O switch to the “ O ” position)

8