Apevia Prestige Series Power Supply User's Manual
Add to my manuals
11 Pages
Apevia Warrior Series is a reliable power supply unit designed for high-performance computing systems. It features a cosmic black casing, ample +12 V Output, enhanced +12 V current capability, and support for Dual / Quad / Multi-Core CPUs. The built-in 135mm silent fan provides efficient cooling, while heavy-duty protections, including OVP, OPP, and SCP, ensure the safety and stability of your system.
advertisement
CONTENTS
1.
Product Features………………………………..………………..…2
2.
Product Specifications……..………………………………………3
3.
Overall Performance………………………………………………..4
4.
Protections…………………………………………………….………..4
5.
Dimensions……….……………………………………………………..5
6.
Cables & Connectors………………………………………………..5
7.
Precautions………………………………………………………………7
8.
Information………………………………………………………………7
9.
Installation………………………………………………….……………8
10.
Troubleshooting….…………………………………………..……….9
1
1.
Product Features a. Stable and reliable b. Cosmic black casing c. Supports single 12v output for higher power usage d. Supports Dual / Quad / Multi-Core CPUs e. Ample +12 V Output, enhanced +12 V current capability broadens utilization
possibilities. f. Multi-GPU technologies supported, 6-Pin and 8-Pin PCI-E connectors to support all
GPU platforms g. Built in 1 x 135mm silent automatically thermal fan speed controlled black fan. h. Dimensions : 150mm x 86mm x 158mm (5.9" x 3.4" x 6.2") W x L x H i. Heavy-duty protections, including OVP (Over Voltage Protection), OPP (Over Power
Protection), SCP (Short Circuit Protection) j. Universal AC input by active PFC (99%RF Typical) k. DC to DC converter design, provides superior dynamic response, greater system
stability and maximizes the 12 V DC rail output.
2
2.
Product Specifications:
a.
AC input voltage: 115-230V b.
AC input frequency: 60Hz/50Hz c.
Operating temperature: The power supply should be operated in an ambient temperature of 0°C to 40°C d.
DC output:
Model
AC Input
DC Output Voltage
Max Output Current
Combined Power
Total Power
600W Prestige Power
+3.3V
20A
100W
115-230VAC , 8A/4A , 50-60HZ
+5V +12V -12V
20A 50A 0.3A
3.6W 600W
600W
+5Vsb
2.5A
12.5W
Model
AC Input
DC Output Voltage
Max Output Current
Combined Power
Total Power
Model
AC Input
DC Output Voltage
Max Output Current
Combined Power
Total Power
800W Prestige Power
+3.3V
20A
100W
115-230VAC , 8A/4A , 50-60HZ
+5V +12V -12V
20A 66A
792W
800W
0.3A
3.6W
1000W Prestige Power
115-230VAC , 8A/4A , 50-60HZ
+3.3V
20A
100W
+5V
20A
+12V
83A
996W
1000W
-12V
0.3A
3.6W
+5Vsb
2.5A
12.5W
+5Vsb
2.5A
12.5W
3
3.
Overall Performance:
a.
Hold up time: 14ms at full load normal line input voltage. b.
Switching frequency: 50KHz at normal line input. c.
Stability: +/- 5% for 24KHR after warm up.
4.
Protections:
a.
Under voltage protection.
If an under voltage fault occurs, the supply will latch all DC outputs into a shutdown state when +12V,+5V & +3.3V outputs under 60% of its maximum value. b.
Over voltage protection
Output Minimum Nominal Maximum Unit
+12 VDC
+5 VDC
13.4
5.70
15.0
6.3
17
7.0
Volts
Volts
+3.3 VDC c.
Short circuit
3.70 4.2 4.8 Volts
An output short circuit is defined as any output impedance less than 0.1 ohms. The power supply shall shut down and latch off for shorting the +3.3 VDC,+5 VDCor+12 VDC rails.
Shorts between main output rails and +5VSB shall not cause any damage to the power supply. The power supply shall either shut down and latch off or fold back for shorting the negative rails.+5VSB must be capable of being shorted indefinitely, but when the short is removed, the power supply shall recover automatically or by cycling PS_ON#. The power supply shall be capable of withstanding a continuous short-circuit to the output without damage or overstress to the unit.
4
d.
Over-power protection
The power supply will be shut down and latch off when output power is 110%~150%
5.
Dimensions:
150mm x 86mm x 158mm (5.9” x 3.4” x 6.2”) W x L x H
6.
Description of Connectors:
5
6
7.
Precautions:
Warning! To avoid the risk of electrical shock, unauthorized persons need the following precautions: a.
Do not open the power supply case! b.
Before turning on, please make sure that the input voltage of the red RMS side switch on the power supply corresponds to the power voltage given in your environment.
(USA & Canada: 115V; Europe, Central and South America: 230V). c.
Avoid exposure to humidity.
8.
Information:
Thank you for purchasing a high-quality Apevia product! Please visit our website at http://www.apevia.com
for complete warranty information and future support for your product. For the latest release information, or should you have any questions, please visit our website, or contact us at:
Support Phone Number: 1-909-718-0789
Support E-mail: [email protected]
7
9.
Installation:
8
10.
Troubleshooting:
If power supply fails to operate properly, please check the following before requesting for an
RMA: a.
Please make sure the power supply and power cord is connected properly. b.
Please make sure the power cord is plugged into the power socket. c.
Please make sure the power supply I/O button is switched to the “ I ” position. d.
Please check if all the connectors (motherboard, floppy and peripherals) are connected properly. e.
Please allow 5 seconds interval before turning the power on again when power supply is switched off manually (setting the I/O switch to the “ O ” position)
9
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement