Atomic Digital Clock

Model: BBB86095

Instructional Manual

DC: 033116

Table of Contents

Display Outdoor Temperature or Seconds .............................

LCD Features ...................................................................

Setup ..............................................................................

Atomic Time Signal ...........................................................

Settings: Time, Date, etc. ..................................................

Indoor Comfort Statement .................................................

Set Time Alarm ................................................................

Snooze ............................................................................

Deactivate/Activate Alarm ..................................................

Indoor/Outdoor Temperature and Humidity ..........................

Temperature Trend Arrows .................................................

Sensor Reception ..............................................................

Low Battery Icon ..............................................................

Mount Temperature Sensor ................................................

Position Clock ..................................................................

Restart ............................................................................

Care and Maintenance .......................................................

Specifications ...................................................................

Warranty and Support .......................................................

FCC Statement .................................................................

Canada Statement ............................................................

9

9

10

11

11

8

8

7

7

7

8

8

6

6

6

3

5

2

2

1

1

Display Outdoor Temperature or Seconds

This versatile clock allows you to display outdoor temperature or seconds counting in the outdoor temperature area. Press the + button to toggle between outdoor temperature, or seconds. Clock will stay on selected option.

Outdoor Temperature Seconds Counting

LCD Features

SET

+ -

ALARM SNOOZE

1

6 7

2

3

4

5

8 9 10 11

12 13 14 15

5

6

7

1

2

3

4

Buttons (on back)

Atomic Signal Reception Tower

Low Battery Icon (Clock)

Snooze Icon

Alarm Icon

AM/PM Indicator

Atomic Time

9

10

11

12

13

Indoor Comfort Statement

Indoor Temperature

Outdoor Temp or Seconds

Weekday

Month/Date

14

15

Sensor Reception Strength

Outdoor Temperature Trend

8 Indoor Humidity

Page 1 www.lacrossetechnology.com/support BBB86095

Setup

1. Insert 2-AA batteries into the TX191 sensor according to polarity.

2. Insert 2-AA batteries into the clock.

3. After 5 minutes place sensor in a shaded outdoor location.

4. Set time and date.

AA

AA

Atomic Time Signal

• Once batteries are installed, the clock will automatically search for

the atomic time signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.

• If there is no WWVB reception, the clock will search for the atomic

time signal every 2 hours until the WWVB time is received.

• After reception, this clock will only search for the atomic signal

after midnight.

• From normal time display, press and release the

SET

button to

search for the WWVB time signal.

• Please be sure you have selected your time zone from the list in the

Settings menu. When the Atomic time signal is received, the clock

will set to the time zone selected. Default is Eastern time.

• For information about WWVB visit:

www.nist.gov/pml/div688/grp40/wwvb.cfm

BBB86095 www.lacrossetechnology.com/support Page |2

Settings: Time, Date, etc.

Note: Only press one button at a time when setting.

• Hold then release the SET button to enter time set mode.

• Press and release the + or buttons to adjust the values. Hold to

adjust quickly.

• Press and release the SET button to confirm and move to the next

item.

• Press and release the SNOOZE button at any time to exit.

Time set order:

1. Beep ON/OFF

2. Atomic ON/OFF

3. DST ON/OFF ( Daylight Saving Indicator )

4. Time Zone

5. 12/24 hour time format

6. Hour

7. Minutes

8. Year

9. Month

10. Date

11. Fahrenheit/Celsius

To begin: Hold the SET button 3 seconds, then release, to enter the

settings menu:

1. Beep ON (default) or OFF

COMFORT

COMFORT

2. Atomic ON (default) or OFF

COMFORT COMFORT

Page 3 www.lacrossetechnology.com/support BBB86095

Note: If Atomic OFF is selected, you will skip DST and Time Zone

and move directly to the hour.

3. DST ON (default) or OFF

COMFORT COMFORT

COMFORT

4. Time Zone-EST (default)

Time Zone

AST

EST

CST

MST

PST

AKT

HAT

Atlantic

Eastern

Central

Mountain

Pacific

Alaskan

Hawaiian

Note: Time Zone needs to be set to your area for the hours to be correct.

5. 12/24 Hour Time Format

COMFORT COMFORT

6. Hour 7. Minutes

COMFORT COMFORT

BBB86095 www.lacrossetechnology.com/support Page |4

8. Year 9. Month 10. Date

COMFORT

COMFORT

11. Fahrenheit or Celsius

COMFORT

COMFORT

COMFORT

• Press and release the SET button to confirm and exit the settings

menu.

• Press and release the SNOOZE button at any time to exit.

Indoor Comfort Indicator

• The indoor comfort indicator tells you at a glance if the humidity

level in your home is humid, comfortable or dry.

• With this indicator you can decide to add or remove humidity for

optimal comfort.

COMFORT

HUMID

GOOD

DRY

Page 5 www.lacrossetechnology.com/support BBB86095

Set Time Alarm

Note: The alarm will be active when set.

Hold ALARM 3 seconds: Alarm Hour

Use the +/- button to adjust.

COMFORT

Press ALARM : Alarm Minutes

Use the +/- button to adjust.

COMFORT

• Press and release the ALARM button to confirm and exit the alarm

menu.

• Press and release the SNOOZE button at any time to exit.

• Alarm is crescendo sound alarm. When the alarm sounds, it

continues for 2 minutes and then shuts off completely.

Snooze

• When the alarm sounds, press the SNOOZE button to silence the alarm

for 10 minutes.

• The snooze icon Zz will flash.

• Press any button except SNOOZE to silence the alarm for 24 hours.

Deactivate/Activate Alarm

• The alarm is active when set.

• From normal time display, press and release the ALARM button to

deactivate or activate the alarm.

• The alarm icon (clock) will show when active.

BBB86095 www.lacrossetechnology.com/support Page |6

Indoor/Outdoor Temperature and Humidity

• Indoor and outdoor temperature and humidity are displayed in the

lower section of the clock.

• Select Fahrenheit or Celsius in the Settings menu.

• Temperature trend arrows track temperature over the past 3 hours.

• The outdoor sensor reception signal indicates the connection strength

between sensor and clock.

Temperature/Humidity

Temperature

Trend

Arrows

Temperature Trend Arrows

The outdoor temperature (2°F / 1°C) trend indicators update every 30 minutes or less. This provides a 3 hour comparison which changes on every ½ hour:

Example: At 3:00 - compare to 12:00 data;

at 3:30 -compare to 12:30 ….. etc.

Temperature rose over the past 3 hours

Temperature is unchanged over the past 3 hours

Temperature fell over the past 3 hours

Sensor Reception

• Hold the - button 3 seconds to search for the sensor.

• The strength signal icon will flash until the sensor signal is received

or for 3 minutes if no signal available.

• The signal will show solid when connected to the sensor.

Page 7 www.lacrossetechnology.com/support BBB86095

Low Battery Icon

• Battery icon by Time-Change batteries in the clock.

Mount Temperature Sensor

• Mount the outdoor sensor on a north-facing wall or in any

well-shaded area. Under an eave or deck rail is preferred.

• The maximum wireless transmission range to the forecast station is

over 300 feet (91 meters) in open air; this does not include barriers

such as walls or floors.

• Be sure the outdoor sensor is mounted vertically.

Position Clock

The clock has pullout stand sit on a desk or table, or a hanging hook to mount on the wall.

• For best Atomic time reception orientate the clock with the front or

the back facing Ft. Collins, Colorado.

• Choose a location 6 feet or more from electronics such as cordless

phones, gaming systems, televisions, microwaves, routers etc.

• Place within range of the outdoor sensor (300 feet open air).

Restart

When the outdoor readings show dashes:

• Bring the sensor in the house five feet from the station.

• Remove batteries from the sensor, and the batteries from the clock.

• Press any button 20 times.

• After 15 minutes insert batteries into the sensor, and into the clock.

• Wait 15 minutes to establish a strong connection. Place sensor outside

in shaded location.

BBB86095 www.lacrossetechnology.com/support Page |8

Care and Maintenance

• Do not mix old and new batteries

• Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

• Always purchase the correct size and grade of battery most suitable

for intended use.

• Replace all batteries of a set at the same time.

• Clean the battery contacts and also those of the device prior to

battery installation.

• Ensure the batteries are installed with correct polarity (+ and - ).

• Remove batteries from equipment when it is not to be used for an

extended period of time.

• Promptly remove expired batteries.

Specifications

Indoor Temp Range: 32°F to 122°F (0°C to 50°C)

Indoor Humidity Range: 10% to 99% RH

Outdoor Temp Range: -40°F to 140°F (-40°C to 60°C)

Distance: Over 300 ft. (91 meters) RF 433MHz (open air)

Power Clock: 2-AA, IEC, LR6 batteries (not included)

Power TX191: 2-AA, IEC, LR6 batteries (not included)

Battery life Clock: over 18 months with reputable batteries

Battery life TX191: over 12 months with reputable batteries

Dimensions Clock: 9.51” W x 7.51” T x 1.0” D

(24.16cm W x 19.08cm T x 2.54cm D)

Dimensions TX191: 1.57” W x 4.49” T x 0.94” D

(3.98cm W x 11.40cm T x 2.39cm D)

Page 9 www.lacrossetechnology.com/support BBB86095

Warranty and Support

La Crosse Technology, Ltd. provides a 1-year limited time warranty

(from date of purchase) on this product relating to manufacturing defects in materials & workmanship.

Before returning a product, please contact our friendly customer support with questions or visit our online help:

Phone: 1-608-782-1610

Online Product Support: www.lacrossetechnology.com/support

Product Registration: www.lacrossetechnology.com/support/register

View full warranty details online at: www.lacrossetechnology.com/warranty_info.pdf

Warranty Address:

La Crosse Technology, Ltd

2830 S. 26th St.

La Crosse, WI 54601

Protected under U.S. Patents:

5,978,738 | 6,076,044 | RE43903

BBB86095 www.lacrossetechnology.com/support Page |10

FCC Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference

that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this equipment. Such changes or modifications could void the user authority to operate the equipment.

All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences.

All trademarks and patents are recognized.

Canada Statement

This device complies with CNR Industry Canada license -exempt devices.

Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Page 11 www.lacrossetechnology.com/support BBB86095