Von Duprin 600 Install Instructions

DUI 609DT VON DUPRIN.
921070-00
Surface Applied Trim Installation Instructions
X= Line X-X corresponds to line X-X on exit device instructions
y ——
1. Prepare door for exit device. See exit
device instructions for holes, line me BPN
X-X, and center lines. > places Ÿ | р
2. Prepare door for trim: 6-7/16”
A. Transfer line X-X from inside (exit 0
device side) of door to outside
id fd U Corresponds to
(trim side) o oor. Use extra care 33/16” center line of exit
if edge of door is beveled. Be sure device on exit
line X-X is parallel to edge of door. | | | device instructions
B. Locate and prepare holes as shown. NON
3. Apply trim. 51/2" | |
4. Apply exit device. u
Outside face
4 of lock stile SS
Device Application Schedule 1-1/8”
> 9/16”
5547-F Concealed Vertical Rod Device /
8847-F Concealed Vertical Rod Device X |
LHR shown, RHR opposite
For cutouts on inside face of door, see exit device instructions
a
Customer Service we Printed in USA,
1-877-671-7011 www.allegion.com/us ALLEGION BR Чем TONES