SIIG AV-GM0A43-S1 4-Display Video Wall Processor Installation Instructions
Add to My manuals20 Pages
advertisement
4-Display Video Wall Processor
P/N: AV-GM0A43-S1
Safety and Notice
The AV-GM0A43-S1 4-Display Video Wall Processor has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the AV-GM0A43-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
● Follow all instructions and warnings marked on this unit.
● Do not attempt to service this unit yourself, except where explained in this manual.
● Provide proper ventilation and air circulation and do not use near water.
● Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
● Use only the power adapter and power cords and connection cables designed for this unit.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
TABLE OF CONTENTS
INTRODUCTION
The AV-GM0A43-S1 4-Display Video Wall Processor is a powerful, cost effective, and fully real time data/video processor for multiple flat panel displays or projectors. Thru digital transmission, the quality of the outcome videos is guaranteed. The output display is grained up to 255 by 255 squares. Virtually any setups for the display layout can be possible by the provided software. The
AV-GM0A43-S1 allows you to input DVI/HDMI, wherever positions and whatever sizes you want for viewing. The embedded scaler converts signals from either DVI/HDMI source to match the native resolution of monitors, flat panel displays, projectors as well as user-selectable output settings up to WUXGA (1920x1200). The AV-GM0A43-S1 sends the resulting processed video thru DVI/HDMI interface to the connected monitors/projectors based on the display layout. The layout can be readily modified to fit your applications and optimize visual effects. Typical applications include digital signage, and broadcasting/education/ surveillance systems etc.
FEATURES
Four DVI/HDMI outputs from 640x480 to 1920x1200 with a local loop out for monitoring
Supports HDMI/DVI input, from 640x480 to 1920x1200@60, interlaced or progressive
Supports 1080p/WUXGA
HDCP compliant
Image parameters and layouts are automatically saved in flash memory of the device and can be recalled for later use
Several image parameters and layouts can be saved in computers and can be loaded for later use
Firmware upgradable for new features and technology enhancements
Supports IR remote control
Software control through USB and Ethernet
Resize, position, zoom output video
User-selectable output settings, up to 1920x1200
Each DVI/HDMI output has an independent controllable display area
Supports remote control to switch 1x1, 2x2, 1x3 rotate, and 1x4 rotate mode
Each output can support OSD control to do edge correction
Compact size
Supports input rotation
PACKAGE CONTENTS
1x AV-GM0A43-S1
1x User Manual
1x 1U rack-mounting ear set
1x 12V 5A power supply
1
2
1x Installation software CD
1x IR Remote control (15 keys)
SPECIFICATIONS
Model Name
Technical
Role of usage
HDCP compliance
Video bandwidth
Video support
Video Format Support
Video loop-out
Audio support
ESD protection
PCB stack-up
Input
Output
Control
Input TMDS signal
DVI connector
USB connector
RJ-45 connector
Mechanical
Enclosure
Model
Dimensions
(L x W x H)
Package
Carton
Model
Weight
Package
Fixedness
Power supply
Power Consumption
AV-GM0A43-S1
Video Wall Processor
Yes
DVI [Single-link 4.95Gbps] HDMI[2.25G to 6.75Gbps]
Up to 1920x1200@60 / 1600x1200@60
HDMI/DVI
No
Yes
Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
8-layer board [impedance control — differential 100Ω; single 50Ω]
1x DVI-D + 1x USB + 1xRJ45
4x DVI-D + 1x Stereo
IR remote control / Ethernet / USB (virtual com) / Front Panel
1.2 Volts [peak-to-peak]
DVI-D [29-pin female, digital only]
Type A
WE/SS 8P8C
AV-GM0A43-S1
Metal case
288 x 180 x 42mm [11.3" x 7" x 1.7"]
494 x 225 x 70mm [1'6" x 8.9" x 2.8"]
510 x 380 x 252mm [1'7" x 1'2" x 10"]
1450g [ 3.2lbs]
2.6kg [ 5.733lbs]
1U rack-mount with ears and Wall hanging holes
12V 5A DC
7.6W
3
Operation temperature
Storage temperature
Relative humidity
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
HARDWARE INSTALLATION
AV-GM0A43-S1 as master
1. Connect all sources to DVI/HDMI Inputs on the AV-GM0A43-S1.
2. Connect all display to DVI/HDMI Outputs on the AV-GM0A43-S1.
3. Connect the +12V 5A DC power supply to the AV-GM0A43-S1
CONNECTION DIAGRAM
4
PANEL DESCRIPTIONS
Front Panel
1.
IR SENSOR: IR sensor for receiving the IR commands from IR remote
2.
Power Status: Power indicator LED
3.
Control buttons
Rear Panel
4.
Power Switch: Power ON/OFF switch
5.
+12V DC: 12V DC power jack
6.
USB virtual com
7.
Ethernet: Ethernet control port
8.
Stereo audio output –L
9.
Stereo audio output -R
10.
INPUT: DVI/HDMI input
11.
Output 1-4: DVI/HDMI outputs
5
SUPPORTED RESOLUTION
Input resolution
640x480
720x480
720x576
800x600
1024x768
1152x864
1280x720
1280x768
1280x800
1280x960
1280x1024
1360x768
1366x768
1400x1050
1440x240
1440x288(576i)
1440x900
1600x900
1600x1200
1680x1050
1920x540(1080i)
1920x1080
1920x1200
Output resolution
640x480@60Hz
720x480@60Hz
720x576@60Hz
800x600@60Hz
1024x768@60Hz
1280x720@60Hz
1280x768@60Hz
1280x960@60Hz
1280x1024@60Hz
1366x768@60Hz
1440x900@60Hz
1680x1050@60Hz
1920x1080@60Hz
1920x1200@60Hz
1600x1200@60Hz
6
OPERATION APPROACH
Method A: IR Remote Control
Button
POWER
FREEZE
MUTE
UP
DOWN
MENU
F1
F2
F3
Function
Power On/Off the video wall processor
Pause the output’s video and audio
Turn off the output’s audio
Fast switch to VW1x1
Fast switch to VW3x1 (+90°)
Fast switch to VW3x1 (-90°)
Fast switch to VW2x2
Fast switch to VW4x1 (+90°)
Fast switch to VW4x1 (-90°)
Up key
Down key
Call OSD menu and confirm
Reserved
Reserved
Reserved
7
8
Method B: Software Operation
System Requirement and Precautions
1.
Whenever power off AV-GM0A43-S1, please stay unpowered at least 5 to 10 seconds to allow power capacitors to discharge.
2.
The AV-GM0A43-S1 provides software control program which runs under Microsoft Windows 98,
2000, XP, 7 through the interface of USB virtual com control.
3.
Before you click on the icon of the software, make sure you have secured the connection between your computer USB port and the AV-GM0A43-S1.
Start the software control program
When clicking on the executable file, the following dialog will pop-up. It has two ways to control the
AV-GM0A43-S1 device (under Microsoft Windows 7, please run as administrator).
USB Mode: Use USB to connect the port on device and computer. Select correct virtual Com port and click the OK button.
Ethernet Mode: Enter the device IP address and click the OK button.
After the software control setting is accomplished, it will enter directly to control interface.
2 3 4
5 6
1
7
Control Interface
1.
Connection Status:
Show the connect information and status. If you use USB control Mode to connect device, the graph is . In contrast, the graph of Ethernet is .
2.
Quick Selection:
In this part, you can set up the screen resolution, screen coordinate and split screen. At first, you should select the TV picture and you can set up the corresponding function. The different color of frame represents the different output TV. The information of coordinate shows the position of output TV.
(1) Step 1
9
Set the output resolution. You can choose the design display icon to select the output port and setup resolution. When setting the different resolution, the coordinate of output will also be changed.
10
(2) Step 2
In here, it has three modes can set up the output TV resolution, position, size and split screen. The details of different mode are described in step 2-1, 2-2 and 2-3.
* Notice that when you want to change another mode, you need to back to the step 2 to change.
Quick Selection
From file
Custom define
(3) Step 2-1
If you choose the Quick Selection mode in step 2, this window will automatically pop-up. In this mode, you can select default screen split and rotate screen (rotate screen only supports of 720p or 1080p resolution).
3x1: This mode will divide the screen into 3 parts and rotate the figure. The remains part shows the full screen.
4x1: The mode will divide the screen into 4 parts and rotate the figure.
When select the 3x1 or 4x1 mode, the picture in the right part of control interface will show a white circle. You can slide this white circle to resize the output screen. In addition, you also can input the number to adjust the coordinate.
(4) Step 2-2
You can load and read configuration from the existing file.
(5) Step 2-3
In Custom define mode, you can define how to cut in both directions and the part you want to show on output TV. If you want to understand or estimate which part you may select, then you can select the Grid button to show grid on the graph. After the setting, please click the button. Besides, you also can click the button to save the configuration for future usage. You can adjust the output position by setting coordinates.
11
(6) Step 3
Zoom In/Out: You can increase/decrease a pixel from the edge of image by clicking
button (the edge of image has four directions). After adjusting the image, the rest of this image will be auto-scaled to fulfill the screen.
Horizontal shift/ Vertical shift: You can arbitrarily move the image on each screen in horizontal direction or vertical direction. Move one pixel at a time.
3.
EDID (Extended display identification data)
(1) Learn EDID From Default
Select Default EDID (1-6 default EDID).
12
Click button to learn default EDID.
(2) Learn EDID From Display
Select the Output.
Click
(3) Learn EDID From File
button to learn display EDID.
Click
(4) View EDID content
button to select the EDID file and write it into input.
Select the EDID input source (Input, Output or From File).
Click button to read the EDID description and analysis.
button to save the EDID as a file in the connected computer. Click
4.
Advanced Setting
(1) Firmware Update
Make sure your USB is connecting and the connecting status is
Click
Click
button to select the firmware file which you want to update.
button.
13
14
Recycle power.
Click
(2) Machine Name
button and the firmware will start to update.
You can set up your machine name in here. Please take a closer look at the length of string
(Max Length: 8).
(3) Change Graph
You can change the default graph on this machine.
Click button to select the graph.
After loading the graph step, please click
(4) Factory Reset
button to write this graph into device.
Click button to do factory default reset.
This default reset process will take about 10 seconds.
After pop-up a dialog indicates complete, please restart this machine.
5.
IP Configure
You also can use the Ethernet to control software program. First, you should click the
button to setup network set. Next, you can read the Ethernet setting from device or manually set to device. After the step of IP configuration, please restart the machine.
15
16
6.
Info
Read the software and firmware version.
7.
Refresh
This function not only can refresh the information of setting but also can reconnect this device.
You can click button to update the control connection. After you click this button, pop-up a “ReConnectForm” window, shows you can select the approach to connect this device.
EDID LEARNING
The EDID learning function is only necessary whenever you encounter any display on the HDMI output port that cannot play audio and video properly. Because the HDMI sources and displays may have various level of capability in playing audio and video, the general principle is that the source will output the lowest standards in terms of audio format and video resolutions to be commonly acceptable among all HDMI displays. In this case, a 720p stereo HDMI signal output would be probably the safest choice. Nevertheless, the user can force the matrix to learn the EDID of the lowest capable HDMI display among others to make sure all displays are capable to play the
HDMI signals normally.
There is a method to do EDID Learning as below:
Software Control: Please refer to the Operation Approach\ Method B: Software Control through RS-232 port (Page 7~15.)
There are six embedded default EDIDs as below,
1. Full-HD(1080p@60)-24bit 2D & 2ch
2. Full-HD(1080p@60)-24bit 2D & 7.1ch
3. HD(1080i@60)(720p@60)-24bit 2D & 2ch
4. HD(1080i@60)(720p@60)-24bit 2D & 7.1ch
5. Full-HD(1080p@60)-30bit 2D & 2ch
6. Full-HD(1080p@60)-30bit 2D & 7.1ch
17
18
WARRANTY
The SELLER warrants the AV-GM0A43-S1 4-Display Video Wall Processor free from defects in the material and workmanship for 3 years from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 3 years warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including static discharge and power surge. This warranty is offered by the SELLER for its BUYER with direct transaction only.
This warranty is void if the warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other implied warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible for shipping charges to and from the SELLER. Cables and power adapters are limited to a 30 day warranty and must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However,
The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual.
The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the AV-GM0A43-S1 features and specifications is subject to change without further notice.
April, 2018
Support
For more info or tech support http://www.siig.com/support
advertisement
Related manuals
advertisement