I N S T A L L A T I O N 970
ILLUMINATED EXIT BUTTON
Instructions
1. Slide the colored leads onto the switch terminals according to the diagram below.
2. Check all connections to be sure that they are properly attached to the terminals. Fail secure and
fail safe have different connections.
3. Connect leads to electric lock and check for proper operation, then fasten the plate to a utility box (supplied by others).
“N” narrow version (1-5/8” x 4-3/4”) is compatible with 1-3/4” (or larger) narrow-frame profiles. Blue cap is standard.
Switch Terminals
DMO & DMA
4 SPST 2 N/O 2 N/C
1
2 SPST 1 N/O 1 N/C
3 a b
4 2
#1 and #2 Normally closed for fail safe systems
#3 and #4 Normally open for fail secure systems
A and B
+
}
Pins that power the lamp of push button
Profile Detail
IS970
4-3/4”
120.7mm
11/16”
17.5mm
3/8”
.375mm
3”
76.2mm
1/4”
6.4mm
1-3/8”
34.9mm
Side Profile
© 2018 dormakaba Canada Inc.
www.rutherfordcontrols.com • Phone: 1.800.265.6630 • Fax: 1.800.482.9795 • Email: [email protected]
3-9/32”
83.3mm
PCN18003
R04-18TG