advertisement
ALGIZ 10XB
Manual
Algiz 10XB Manual
Safety Precautions
Warning
Always completely disconnect the power cord from the device before you uncover the device and work on the hardware.
Do not connect the electronic device with a power socket while the power is on.
Sensitive electronic components can be damaged by sudden power surges.
Only
experienced electronics personnel should open mechanical housing.
Caution
Always ground yourself to remove any static charge before touching the printed circuit board.
The electronic devices are very sensitive to static electricity.
For safety purposes, please use a grounding wrist strap at all times.
Place all electronic components in a static ‐ dissipative surface or
static ‐ shielded bag when they are outside of the chassis.
Temperature
The recommended temperature range for ALGIZ 10XB in adaptor mode is
‐ 10 ~ 40 ℃ , battery mode is ‐ 10 ~ 50 ℃ , charge mode is ‐ 5 ~ 35 ℃
Algiz 10XB Manual
Index
Part 1: .............................................................................................................. 5
Identifying ALGIZ 10XB ................................................................................... 5
Getting Started ................................................................................................ 5
What’s in the Box................................................................................................................ 6
Specification ....................................................................................................................... 7
COM Port Assignment ........................................................................................................ 8
COM Port Assignment ........................................................................................................ 8
Boot Options ....................................................................................................................... 8
Factory Reset ..................................................................................................................... 8
Front Side ........................................................................................................................... 9
Left and Right Side ........................................................................................................... 10
Rear Side .......................................................................................................................... 11
Function Keys ................................................................................................................... 12
LED Indicators .................................................................................................................. 12
Part 2: ............................................................................................................ 13
Using ALGIZ 10XB ......................................................................................... 13
AC Power ......................................................................................................................... 14
Battery Power ................................................................................................................... 14
Insertion of the Battery Pack ............................................................................................ 15
Removal of the Battery Pack ............................................................................................ 15
Charging the Battery ........................................................................................................ 16
Battery Care ..................................................................................................................... 16
Battery Power System ...................................................................................................... 16
Charging the Battery ........................................................................................................ 16
Power Supply ................................................................................................................... 16
Starting ALGIZ 10XB ........................................................................................................ 18
Screen Calibration ............................................................................................................ 18
Installing SD Card............................................................................................................. 19
Part 3: ............................................................................................................ 20
Software ........................................................................................................ 20
Hot-Tab ............................................................................................................................. 21
Adjusting the LCD Brightness .......................................................................................... 21
Adjusting the Speaker Volume ......................................................................................... 23
Battery Status ................................................................................................................... 25
WLAN ............................................................................................................................... 26
Algiz 10XB Manual
Bluetooth .......................................................................................................................... 27
GPS 28
Camera ............................................................................................................................. 29
External GPS Antenna ..................................................................................................... 33
Part: 4 ............................................................................................................ 35
ALGIZ 10XB Care .......................................................................................... 35
Battery Protection Tips ..................................................................................................... 36
Touch Screen Protection Tips .......................................................................................... 37
ALGIZ 10XB Care............................................................................................................. 37
Cleaning the Exterior ........................................................................................................ 37
Connectors ....................................................................................................................... 38
Copyright Notice ............................................................................................................... 38
Trademark Acknowledgement .......................................................................................... 38
Disclaimer ......................................................................................................................... 38
Customer Service ............................................................................................................. 38
Algiz 10XB Manual
Part 1:
Identifying ALGIZ 10XB
Getting Started
5 handheld
Algiz 10XB Manual
What’s in the Box
Item Description
One 2 Cell Li-Ion Battery Pack
19V Adapter w/ standard power cord.
Standard type, 1.8M
Screen protector film
ALGIZ 10XB Quick start guide
6 handheld
Algiz 10XB Manual
Specification
ALGIZ 10XB is a rugged tablet PC designed for use in various challenging environments, e.g.
field work, outdoor activities and construction sites.
With its rugged design, ALGIZ 10XB is able to
withstand shocks, vibrations, high humidity as well as high/ low temperatures.
System
Processor
BIOS
Chipset
Intel®
AMI System BIOS
Intel
Celeron®
ATOM Soc
N2930 Quad
Integrated
SODIMM, DDR3L 1600 4GB
Core 1.83
GHz Processor
Memory
LAN Controller
Storage
Audio
Intel®
SATA
Ethernet interface
Controller support
I211
Mini ‐
‐ AT
PCIe
interface SSD 128GB
Audio ‐ out / Audio ‐ in / Microphone ‐ in.
Internal Speaker
Display Specification
Size
Resolution
Brightness
Touch
I/O Connectors
10.1”
1366
x
(16:9)
768
600 cd/m2 (typ.)
4W Resistive Touch
Left Side
Right
Side
Bottom Side
Rear Side
1xDC Power Jack, 1xVGA, 1Xusb 2.0,1xRS232
1xLAN, 1xUSB 3.0, 1xMic/Audio Jack,
1xSIM Card Slot, 1xMicro SD Card Slot
Pogo ‐ pin for docking
Service Window
Buttons and Indicators
Control Button Power On/Off, Menu, Up, Down, Left, Right, Enter,
3 Programmable Hotkeys
LED Indicators Power Status, SSD Status, RF Device Status, Battery Status, GPS Status
7 handheld
Algiz 10XB Manual
COM Port Assignment
COM1
COM2
COM3
COM11
COM12
RS232
B+ Power & UART Wafer
GPS
Docking Station
Docking Station
Boot Options
F1
F2
F3
Initiate factory reset
Enter BIOS
‐
Factory Reset
The ALGIZ 10XB has a built ‐ in recovery utility that can be used to reset your computer’s SSD disk to its factory state.
Press F1 during booting when the Handheld logo screen appears.
Follow the
instructions on the screen to continue with the factory reset.
Caution: This procedure will erase all data on your disk.
8 handheld
Algiz 10XB Manual
Front Side
1
2
Ref.
Item
Front
Light
Microphone
Sensor
3 OSD Control Keypad
Description
Receives sound to make voice recordings.
Senses the ambient light for automatic adjustment of the display backlight.
The features can be enabled through the OSD
Control Keypad.
The OSD Control Keypad provides hotkeys with all functions including
Power On/Off, Menu, Up, Down, Left, Right,
Enter and programmable hotkey , Windows chrome menu key and Windows Home key..
Front Speaker
4
Speaker
9 handheld
Algiz 10XB Manual
Left and Right Side
6
7
3
4
9
1
2
Ref.
Item
5
DC
VGA
Power
Jack
Description
DC plug for supplying power to the device
For connection to external display devices such as monitors and projectors
USB 2.0
RS232
Port Can be connected to USB ‐ interface peripherals
Accepts external connections using the interface of
RS232 (D ‐ sub 9 pins)
Ethernet(RJ45) Port For connection to an Ethernet 10/100/1000 ‐ based network
USB 3.0
Port
Combo Audio Jack
Can
For
be connected connection speakers.
to
to a
any set
USB of
‐ interface peripherals headphones or
external
Micro SD Card Slot Accepts a Micro SD Card for additional features.
10 handheld
Algiz 10XB Manual
Rear Side
1
2
Ref.
Item
Stylus Pen
Service Window
11 handheld
Description
User ‐ accessible compartment.
Algiz 10XB Manual
Function Keys
Components
Power Button*
Menu
Up/Down/Left/
Right/OK Button
Description
Hold down for 4 seconds to turn the computer on.
Menu button to control: brightness, volume, battery, power to modules, and system information.
Control of up, down, left, right and
Enter functions.
F1
F2
Programmable button.
Press F1 to configure.
Windows 8 Chrome menu and it also can programmable.
Windows 8 Home
Key
Its function is like the Windows Key on the keyboard of Laptop and it also can programmable.
* If computer does not respond you can power it off by holding down the Power Button until the
LEDs are switched off.
Hold down for about 10 seconds.
LED Indicators
LED Term
Power mode
Storage Status
Radio Status
Battery Status
GPS Status
Symbol
Indicator Status Description
Green: System is on
No light: System is off or LED indicators are off in Hot ‐ tab.
Flashing green light: SSD is reading/writing data
Green: Indicates that any transmitting radio is turned on.
(WiFi, BT)
Green: Full battery
Red: Low battery
Orange: Charging
Flashing red: Running on Hot ‐ swap battery
Green: GPS is on.
12 handheld
Algiz 10XB Manual
Part 2:
Using ALGIZ 10XB
13 handheld
Algiz 10XB Manual
Before turning the unit on, make sure that the tablet is either connected to AC power or the battery.
AC Power
The ALGIZ 10XB power supply is comprised of two parts, the power adapter and the battery.
The power adapter converts AC power from a wall outlet to the DC power required by the ALGIZ 10XB.
Your ALGIZ 10XB comes with a universal AC ‐ DC adapter.
That means that you may connect the power cord to any 100V ‐ 120V as well as 220V ‐ 240V outlets without using power converters.
Different countries may require an adapter to be used to connect the supplied standard AC power cord to a different standard.
Battery Power
The ALGIZ 10XB is designed to work with two types of battery.
A standard battery with 5300mAh and an extended battery with double the capacity.
A fully charged battery pack will provide several hours of battery life.
Among other factors, the battery life is especially dependent on the battery’s condition, tablet usage, as well as the temperature.
14 handheld
Algiz 10XB Manual
Insertion of the Battery Pack
Removal of the Battery Pack
Caution
Please fully charge the battery in advance of operating ALGIZ 10XB for the first time.
New battery packs must be 100% charged before ALGIZ 10XB is disconnected from the external power source.
It takes a few hours to fully charge the battery when ALGIZ 10XB is turned off.
15 handheld
Algiz 10XB Manual
Charging the Battery
Before you use your Handheld tablet PC, you need to charge the battery.
The battery begins to charge as soon as the Handheld tablet PC is connected to the external power source.
Please fully charge the batteries before using them for the first time.
The new battery should be fully charged before the tablet PC is disconnected from the external power source.
The battery pack is fully charged when the battery LED indicator turns OFF.
It takes about a couple of hours to fully charge the battery when the Handheld tablet PC is turned OFF.
Battery Care
The Handheld tablet battery pack, like all rechargeable batteries, has a limit on the number of times it can be fully recharged.
Fully draining and charging the battery once a day will allow the batteries to last for over a year, but rechargeable time limits are based on the ambient temperature, humidity and how your tablet PC is used.
The ideal ambient temperature range is between 10°C and 29°C
(50°F and 85°F).
Battery Power System
This tablet PC is designed to work with one removable battery pack placed inside the battery pack compartment.
A fully charged battery pack will provide several hours of battery life, which can be extended further by configuring power management in Windows.
Charging the Battery
When the power adapter is plugged in, the battery automatically recharges regardless of whether your tablet PC is in the ON or OFF mode.
It takes a couple of hours for the battery to be fully charged when the power is OFF and twice as long when the tablet PC is in use.
When the charger LED indicator lights up orange, charging is required.
The battery is charging when the red LED is
permanently on.
When the LED turns OFF, the battery pack is fully charged.
Power Supply
The power for the Handheld rugged tablet PC is supplied by the power adapter and battery pack, the power rating and manufacturer information are listed as below.
For safety reasons, the adapter must
be connected to ground (earth).
16 handheld
Algiz 10XB Manual
Power Adapter
Battery Pack
Manufacturer: EDAC Power Electronics Co Ltd
Model: EA10633B
Input Rated: 100 ‐ 240Vac, 1.8A, 50 ‐ 60Hz.
Output Rated: DC 19V, 3.42A.
Manufacturer: T ‐ Gee Electronic Co., Ltd
Model: ALG10X ‐ 08A
Rated: 5300mAh DC 7.4V
Caution!
Do not attempt to fix or replace the battery, as this may cause an explosion!
Only use the specified battery and follow the instructions in the manufacturer's user manual.
17 handheld
Algiz 10XB Manual
Starting ALGIZ 10XB
Note: you will be asked to enter the Microsoft Windows license number which can be found under the main battery.
Press the power button for 2 seconds to power on the ALGIZ 10XB.
Follow the Microsoft Windows on ‐ screen instructions to get started with Windows.
The screen calibration may not be accurate the first time you start the computer.
Follow this procedure to calibrate the touchscreen:
Screen Calibration
Open Control Panel > Hardware and Sound > Tablet PC Settings
Click Calibrate and follow instructions
Repeat step 1 and 2 until you are satisfied with the calibration
18 handheld
Algiz 10XB Manual
Installing SD Card
Remove the SD card cover on the right side.
This cover is secured with two screws.
19 handheld
Algiz 10XB Manual
Part 3:
Software
20 handheld
Algiz 10XB Manual
Hot-Tab
ALGIZ 10XB has a pre ‐ installed control application, Hot ‐ Tab.
The control application is used to monitor and control features such as brightness, volume, battery status, power to modules and
system information.
The control application is accessed by pressing menu on the ALGIZ 10XB.
Press menu multiple times to navigate through Hot ‐ tab.
You can use the arrows on the control panel to navigate within the OSD
menu.
To exit Hot ‐ Tab: Double tap outside of the Hot ‐ Tab window or click the “x” in the top right corner.
Adjusting the LCD Brightness
The Brightness Control is accessed by pressing menu once and chooses “Setting”.
Then choice and se the left and right arrow keys to adjust the LCD brightness.
21 handheld
Algiz 10XB Manual
Check Auto Brightness to activate automatic brightness.
With this item checked, ALGIZ 10XB will adjust the LCD brightness based on the ambient light.
22 handheld
Algiz 10XB Manual
Adjusting the Speaker Volume
The Speaker Control is accessed by pressing menu once and chooses “Setting”.
Then choice
Use the left and right arrow keys to adjust the volume.
23 handheld
Algiz 10XB Manual
24 handheld
Algiz 10XB Manual
Battery Status
The Battery status is accessed by pressing menu once and chooses “Setting”.
Press the Menu button one time to view the battery status.
The ALGIZ 10XB has a replaceable Main battery as well as a second built ‐ in hot ‐ swap battery.
The hot ‐ swap battery will activate once the main battery is empty or unplugged.
25 handheld
Algiz 10XB Manual
WLAN
ALGIZ 10XB can connect to IEEE 802.11
ac a/b/g/n networks operating on 5GHz.
The Function Control is accessed by pressing menu one time and chooses “Device”.
Check Wi ‐ Fi to
turn the Wi ‐ Fi radio on.
Uncheck Wi ‐ Fi to turn it off.
26 handheld
Algiz 10XB Manual
Bluetooth
Depending on your application, the Bluetooth module can give you capability for short ‐ range wireless communication between devices without requiring a cable connection.
The transmission can pass through walls, pockets and briefcases as long as the two devices are within a range of around 10 meters.
The Function Control is accessed by pressing menu one time and chooses “Device”.
Check Bluetooth to turn the Bluetooth radio on.
Uncheck Bluetooth to turn it off.
27 handheld
Algiz 10XB Manual
GPS
ALGIZ 10XB is equipped with a dedicated GPS receiver for optimum performance.
The Function Control is accessed by pressing menu one time and chooses “Device”.
Check GPS to turn the GPS receiver on.
Uncheck GPS to turn it off.
The GPS evaluation software, U ‐ Center, is accessed by double ‐ clicking the U ‐ Center icon available on the desktop.
Set the port to COM3
Set Baud rate to 9600
28 handheld
Algiz 10XB Manual
GPS will now start looking for satellites to calculate its position.
This procedure may take from a few seconds to a few minutes depending on satellite positions, interference, environmental factors and radio noise.
Tip: See the U ‐ Center manual for more information about this GPS evaluation software.
Camera
29 handheld
Algiz 10XB Manual
The ALGIZ 10XB has a built ‐ in 5 ‐ megapixel camera.
The Function Control is accessed by pressing menu one time and chooses”Device”.
Check Camera to turn the Camera on.
Uncheck Camera to turn it off.
Or press menu and click the Camera icon to start the Camera.
In the settings you can control the destination folder for saved pictures or videos, previews, as well as image resolution.
30 handheld
Algiz 10XB Manual
In the settings you can control the flash light mode to on/off/auto.
In the settings you can control the image resolution.
31 handheld
Algiz 10XB Manual
In the settings you can switch to photograph or video mode.
In the settings you can take a picture.
32 handheld
Algiz 10XB Manual
External GPS Antenna
The Function Control is accessed by pressing menu one4 time and access to “Device”.
Check GPS
Antenna (auto) to activate an external antenna installed on the vehicle dock Alg10X ‐ 05A .
When this item is checked, Alg10XB will automatically switch to the external antenna when the unit is docked.
Do not check this item unless you have an external antenna installed on your Alg10X ‐ 05A vehicle dock.
Uncheck GPS Antenna (auto) to turn this feature off.
System Information
33 handheld
Algiz 10XB Manual
Press the Menu button one time and access to “Setting” to view system information.
Please have this information ready if you are contacting Handheld support.
34 handheld
Algiz 10XB Manual
Part: 4
ALGIZ 10XB Care
35 handheld
Algiz 10XB Manual
Battery Protection Tips
To avoid damage to the battery, recharge the battery pack when it is nearly discharged.
When
recharging, the battery pack should be fully charged.
The battery pack is a consumable product and the following factors will shorten its life:
•
Frequently charging the battery pack
•
Using, charging or storing the battery at high temperatures
A high ambient temperature will cause the temperature of the battery pack to rise.
Avoid charging the battery pack inside a closed vehicle and in hot weather conditions.
Charging will also not start if the battery pack is not within the allowed temperature range.
Charging the battery pack with the system’s power off is recommended.
To maintain the battery pack’s operating efficiency, store it in a cool dark place removed from the tablet PC and with 30 % ~ 40 % charge remaining.
Avoid installing or removing the battery pack when the ALGIZ 10XB is in Standby mode.
Charging time will be prolonged when the ALGIZ 10XB is turned on.
• No debris, combustibles or chemicals should be allowed near the battery while charging.
Extra caution is required when charging the battery in non ‐ commercial conditions.
• The battery should only be used in accordance with the instructions for use, storage and recharging as set out by this manual.
• Improper use of the battery may result in fire or explosion.
• Do not use incompatible batteries or chargers.
The use of incompatible batteries or chargers may result in risks such as fire, explosion, leaks, etc.
If you have any questions about batteries or the charger, contact Handheld.
• Do not attempt to disassemble, open, bend, modify, puncture or smash the product or the battery.
• If you drop the device hard on a solid surface, the battery may overheat.
• Extra care must be taken to avoid short circuiting, connect a metal conductor to the battery terminals.
• Special attention must be paid to avoid modification, resetting, inserting foreign bodies into the battery, exposing the battery to water or other liquids, fire, explosion and other risks.
• Do not allow children to handle the battery unsupervised.
• Used batteries must be disposed of in accordance with local regulations.
• Do not burn the battery.
• If the battery has been swallowed, immediately contact a doctor.
• If the battery leaks, be careful not to allow the fluid to come into contact with skin or eyes.
If battery fluid comes into contact with skin or eyes, rinse using plenty of water and seek immediate medical advice.
• If you suspect damage to the device or the battery, contact Handheld.
36 handheld
Algiz 10XB Manual
Touch Screen Protection Tips
Avoid applying excessive force to the display, use only your finger or the supplied touchscreen stylus pen on the display.
The recommended force shall not exceed 200gf.
Take care to protect the screen from scratches.
Only use a plastic pen designed for touchscreens or
the stylus provided.
Never use pens, pencils or other sharp objects on the screen.
To clean the touchscreen, wipe the screen with a clean, soft, lint ‐ free cloth.
It is recommended that the screen is protected using protective film (one sheet of protective film is supplied with the product).
Advantages of using protective film include the following:
Protects the screen from scratches and grooves.
More realistic feel when writing and touching
Protects the screen from damage caused by abrasion and foreign bodies.
Extends the lifespan of the touchscreen.
Your Handheld product screen is made from glass.
Do not apply excessive force to the screen.
Using the touchscreen at low temperatures (less than 5 Ԩ ) may cause a slower response time, which is normal.
A normal response time will be restored once the unit returns to room temperature.
Use only detergents or cleaners intended for computers.
Take care not to allow any excess liquid to
enter the gaps around the screen.
To avoid scratches, wipe using a dry non ‐ abrasive cloth.
ALGIZ 10XB Care
Protect your Handheld product from extreme temperature changes.
When the temperature is high, do not leave the device on the dashboard of a vehicle and keep well away from any heat sources.
Do not use or store your Handheld product in dirty, humid or wet conditions that are beyond the product specifications.
To maximize battery life and performance, replace the battery periodically.
The battery life depends
on its use.
Cleaning the Exterior
37 handheld
Algiz 10XB Manual
Use only detergents or cleaners intended for computers.
Connectors
1.
Remove the battery
2.
Soak the end of a swab with isopropyl alcohol and rub across the connector pins.
3.
Be careful not to leave any residue on the connectors.
4.
This process should be repeated approximately three times.
Note: If isopropyl alcohol is not available, use computer cleaning detergent or a pencil eraser
(rubber), taking care not to leave any foreign bodies on the pins.
Copyright Notice
Copyright © 2010 Handheld Group AB, ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated or transmitted in any form or by any means, electronic or mechanical,
for any purpose, without the prior written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.
Disclaimer
Handheld Group AB reserves the right to make any product changes without notice, including to circuits and/or software described or contained in this manual, in order to improve design and/or performance.
Handheld Group AB assumes no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright, or mask works rights to these products and makes no representations or warranties that these products are free from patent, copyright, or mask works rights infringement, unless otherwise specified.
Applications described in this manual are for illustration purposes only.
Handheld Group AB makes no representation or warranty that such applications will be suitable for the specified use without further testing or
modification.
Customer Service
38 handheld
Algiz 10XB Manual
Support is provided by Handheld.
Visit our website at www.handheldgroup.com
to find updated
information about the product.
You can also contact your distributor, sales representative or our customer support center for further assistance.
If you contact our customer support center please have the following information ready before you call:
Product serial number
Peripheral attachments
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages with print screen images
In addition to this, free technical support is available from our engineers during working hours.
We are always ready to provide advice on application requirements or specific information about the installation and operation of any of our products.
Please do not hesitate to call or e ‐ mail us.
Manufacturer: Handheld Group AB
Address: Handheld Group AB, Kinnegatan 17 A, SE ‐ 531 33, Lidköping, Sweden
TEL: +46 (0) 510 ‐ 54 71 70 FAX: +46 (0) 510 ‐ 282 05
39 handheld
Algiz 10XB Manual
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐ Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation
Exposure to radio frequency (RF) signals
Body ‐ worn Operation
This device was tested for typical body ‐ worn operations.
A minimum separation distance must be maintained between the user’s body and the handset, including the antenna: 1 cm to comply with
the RF exposure requirements.
40 handheld
Algiz 10XB Manual
Industry Canada Warning his device complies with Industry Canada license ‐ exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class
B digital apparatus complies with Canadian ICES ‐ 003.
Le present appareil est conforme aux CNR d'Ind ustrie Canada applicables aux appareils radio ex empts de licence.
L'exploitation est autorisee aux de ux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appar eil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en comp romettre le fonctionnement.
Operations in the 5.15Ghz
‐ 5.25Ghz
band are restricted to indoor usage only.
41 handheld
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Identifying ALGIZ 10XB
- 5 Getting Started
- 6 What’s in the Box
- 7 Specification
- 8 COM Port Assignment
- 8 Boot Options
- 8 Factory Reset
- 9 Front Side
- 10 Left and Right Side
- 11 Rear Side
- 12 Function Keys
- 12 LED Indicators
- 13 Using ALGIZ 10XB
- 14 AC Power
- 14 Battery Power
- 15 Insertion of the Battery Pack
- 15 Removal of the Battery Pack
- 16 Charging the Battery
- 16 Battery Care
- 16 Battery Power System
- 16 Charging the Battery
- 16 Power Supply
- 18 Starting ALGIZ 10XB
- 18 Screen Calibration
- 19 Installing SD Card
- 20 Software
- 21 Hot-Tab
- 21 Adjusting the LCD Brightness
- 23 Adjusting the Speaker Volume
- 25 Battery Status
- 27 Bluetooth
- 29 Camera
- 33 External GPS Antenna
- 35 ALGIZ 10XB Care
- 36 Battery Protection Tips
- 37 Touch Screen Protection Tips
- 37 ALGIZ 10XB Care
- 37 Cleaning the Exterior
- 38 Connectors
- 38 Copyright Notice
- 38 Trademark Acknowledgement
- 38 Disclaimer
- 38 Customer Service