Cypress Semiconductor PowerPSoC® Evaluation Kit CY3267 CY3267 Dev Kit Data Sheet

1

CY3267 POWERPS

O

C

®

LIGHTING EVALUATION KIT

QUICK START GUIDE

2

Connect the CY3267 PowerPSoC board to the LED daughter card; see section 2.5 of the user guide for instructions.

3

Mount the optical diffuser on the LED daughter card.

4

Insert the kit CD in the CD drive. Install kit contents, PSoC Designer, PSoC Programmer, and Intelligent Lighting Control GUI.

5

Connect the main board to the PC using the USB cable provided with the kit.

6

Use the GUI installed on the PC to control

LEDs. See the user guide for more information about the GUI.

Touch the ON/OFF CapSense button to toggle the LEDs. Touch the COLOR

CapSense button to cycle through colors.

CY3267 POWERPS

O

C

®

LIGHTING EVALUATION KIT

QUICK START GUIDE

CY3267 PowerPSoC Lighting Evaluation Kit Details

Debug Interface

Port Extension Header

Power Configuration

VDD Selection Jumper

FirstTouch RF

Interface

CY8CLED04DOCD1

PowerPSoC Device

Artaflex Radio

Module Interface

Full Speed USB

Interface

Programming Header for CY8C24894 CapSense Buttons

CY8C24894 I2C-USB

Device

Programming Header for

CY8CLED04DOCD1

Main Board Interface

Temperature

Sensor

Fan and Thermistor

Interface

LED Daughter Card

Interface

HBLED

Module

For the latest information about this kit, visit www.cypress.com/go/CY3267

© 2011 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. DOC#: 001-50556 REV *B