advertisement
LENGTH: 1.22m
Absco Industries
Wood Store Model: 1208WSK
DEPTH: 0.87m
HEIGHT: 1.15m
773mm
1140mm
We thank you for choosing an Australian made shed
For further assistance please visit our detailed instructional video library at http://www.abscosheds.com.au/watch-videos
At ABSCO Industries we are always looking to be number ONE
Please let us know what you think of our instructions
Feedback makes us better [email protected]
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018 PAGE 01
Absco Industries
Wood Store Model: 1208WSK
GENERAL INSTRUCTIONS
· Before commencing any assembly, read through these instructions in detail to gain a thorough understanding of assembly methods and associated details.
· Unpack the carton and carefully identify and check off all the parts against the parts described and illustrated on "COMPONENTS PACKING LIST" pages.
SITE PREPARATION
· The surface on which this product is to be installed must be level. An uneven surface may result in misalignment of parts.
· Anchor sets are not supplied as standard items with this product. Use of anchors appropriate for the surface beneath is highly recommended.
TOOLS REQUIRED
SAFETY NOTES
· Some parts may have sharp edges. It is advisable to wear gloves when handling these items and safety glasses if drilling holes.
· Covered shoes are highly recommended.
· Do not assemble this product in windy conditions.
· Ensure that this product is securely anchored to the surface beneath immediately after construction is completed.
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018 PAGE 02
6
2
2
2
QTY
2
2
1
1
100
Absco Industries
Wood Store Model: 1208WSK
COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS
DESCRIPTION
SNAPTiTE SHEET
STRAIGHT
1130x773mm
SNAPTiTE SHEET
STRAIGHT
865x773mm
SNAPTiTE SHEET
STRAIGHT
1108x773mm
MAIN PACK CARTON (1 OF 1)
PART #
SH44A
SH44B
SH44C
CHK QTY
2
1
2
DESCRIPTION
BRACING
STRIP
1600x20mm
BRACING
STRIP
1140x20mm
BRACING
STRIP
1375x20mm
PART #
BKT21
BKT22
BKT23
CHK
1208WS
CHANNEL PACK
1208WSCP
1 INSTRUCTIONS
& FITTINGS PACK
INSTP##1208WS
1208WS CHANNEL PACK
CHANNEL
1130mm
STRAIGHT
CHANNEL
1130mm
STRAIGHT
CHANNEL
773mm
STRAIGHT
CHANNEL
1217mm
STRAIGHT
CH68A
CH68B
CH68C
CH68D
2
1
1
CHANNEL
865mm
STRAIGHT
CHANNEL
1108mm
STRAIGHT
CHANNEL
1108mm
STRAIGHT
8G x 3/8" SELF
TAPPING SCREW
INSTRUCTIONS & FITTINGS PACK
FAST001
INSTRUCTION
MANUAL
CH68E
CH68F
CH68G
IM
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018 PAGE 03
Absco Industries
Wood Store Model: 1208WSK
SNAPTiTE ASSEMBLY GUIDE
The snaptite assembly system locks most perimeter channels to all roof and wall sheets without the need for tools and fasteners.
SNAP
SNAP
To assemble each panel, the perimeter channels are secured to the top and bottom of each panel using the snaptite system, as detailed on the following pages wherever you see this symbol.
SNAP i
HIGH SIDE
After fastening sheets together, position the channel over one end of the sheets.
Gently tap it over the SNAPTiTE lugs, working along the sheets to the other end.
PUSH
PUSH
Each perimeter channel must finish flush with the
TIP: Position sheets on timbers, trestles or partly over edge of concrete slab.
edges of the sheets.The snaptite system allows adjustment for this process by simply tapping the channel along the sheets until each end is neatly
HIGH SIDE flush. If you need to remove channels from the panels, pull the channel along the panel from
FASTENING SYMBOLS
D opposing ends. You may need someone to help with this.
Join components together by pre-drilling the holes first.
Use one component as a template to mark where the
3mm POP RIVETS holes are. Drill with 3mm drill bit.
4mm NUT & BOLT SET
Join components together with one screw at this location only, as some channel sections have extra holes that are not required for this model of garden shed
Do not join components together at this location yet, as the screw may obstruct further assembly of other components
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018 PAGE 04
LEFT PANEL
NOTE HOLES POSITIONS ILLUSTRATED
D
Absco Industries
Wood Store Model: 1208WSK
SIDE PANEL ASSEMBLIES RIGHT PANEL
NOTE HOLES POSITIONS ILLUSTRATED
68A
68B
D
44A
44A
68B
D
D
68C
68A
SNAP i
68C
SNAP i
68F
D
SNAP i
68C
44C
D
SHELF PANEL ASSEMBLY
68G
68C
SNAP i
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL
SNAP i
68C
SNAP i
68C
MODEL: 1208WSK 13-02-2018 PAGE 05
Absco Industries
Wood Store Model: 1208WSK
ROOF PANEL ASSEMBLY
NOTE HOLES POSITIONS ILLUSTRATED
44B
44B
NOTE HOLES POSITIONS ILLUSTRATED
D
68E
D
68E
68D
SNAP i
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL
68D
SNAP i
MODEL: 1208WSK 13-02-2018 PAGE 06
Absco Industries
Wood Store Model: 1208WSK
PANEL CONSTRUCTION
68B
68B
NOTE HOLES POSITIONS
ILLUSTRATED
68G
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018 PAGE 07
Absco Industries
Wood Store Model: 1208WSK
FINAL CONSTRUCTION
DRILL 1x Ø3mm HOLE 10mm IN FROM
EACH END OF ALL BRACING STRAPS
USE A PAIR OF TINSNIPS
OR SIMILAR TOOL TO
TRIM OFF THE CORNERS
OF ALL BRACING STRAPS
D
BKT21
BKT21
BKT22
BKT23
BKT23 replacement or refund for a major failure and for compensation for any other foreseeable loss or damage. You are also entitled
IT IS HIGHLY RECOMMENDED THAT THE WALLS OF YOUR 1208WSK WOODSTORE BE SECURED
DOWN ONTO THE SURFACE BENEATH.
FIT SCREWS, ANCHORS OR PEGS THROUGH THE PRE-PUNCHED HOLES ON THE BOTTOM
CHANNELS ON EACH SIDE WALL - HOLES MAY NEED TO BE DRILLED OUT.
ANCHORING LOCATIONS
LOCATION OF 4
HOLD DOWN
ANCHORS three business days to advise you of the assessment outcome of the claim, which may include your expenses incurred in making
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018 PAGE 08
Absco Industries
Wood Store Model: 1208WSK
AUSTRALIA PRODUCT WARRANTY AGAINST DEFECTS
Congratulations on your purchase of an ABSCO SHED
ABSCO SHEDS, including garden sheds, garden beds, aviaries, storage units, garages, awnings and carports are made using high quality Australian made steel.
We are pleased to advise we warrant that the steel coating will not rust, crack, flake peel or blister for 30 years from date of purchase, when installed within Australia.
This warranty does not apply to surface deterioration of panels caused by 'Swarf” (Tiny particles of steel debris left from cutting, grinding or drilling operations) that has not been removed after building construction, or as a result of contact with damp soil, chemicals, fertilisers or other corrosive substances.
This warranty covers any Absco product used for normal domestic use and installed in accordance with the installation instructions. The warranty does NOT cover Damage caused by storms, wind, rain snow or poor foundations.
This warranty does NOT cover ABSCO products installed in severe coastal, industrial or other highly corrosive environments. The warranty does not cover fasteners (screws, nuts, bolts, rivets, hasps or sliding padbolts).
The warranty is limited to replacement and delivery of components and does not include any labour or installation costs. The benefits given by the warranty are in addition to your other rights and remedies under a law in relation to the goods or services to which the warranty relates.
The warranty applies to the exclusion of all other representations, guarantees or warranties express or implied, our goods come with guarantees that cannot be excluded under the Australian consumer law and is not transferable. You are entitled to a replacement or refund for a major failure and for compensation for any other foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of an acceptable quality and the failure does not amount to a major failure. For further information go to http://www.consumerlaw.gov.au
.
Please retain a proof of purchase (sales docket or invoice) or register your warranty within 30 days of purchase here: www.absco.com.au/register_warranty.php
In the unlikely event a warranty claim is made, it must be supported by photographic evidence and details of the defect, including component part numbers, together with proof of purchase documentation (or on-line registration of purchase) and forwarded to the address below. Upon receipt of the warranty claim, the Customer Service Manager will contact you within three business days to advise you of the assessment outcome of the claim, which may include your expenses incurred in making the claim.
THE CUSTOMER SERVICE MANAGER, ABSCO INDUSTRIES, PO BOX 119 ACACIA RIDGE QLD AUSTRALIA 4110
PHONE: 1800 029701 FAX: 07-33441191 EMAIL: [email protected]
Issued 01 January 2013
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION MANUAL MODEL: 1208WSK 13-02-2018 PAGE 09
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement