Siqura BC920-AS Assembly IP box camera Quick Start Guide

BC920

3MP box camera, H.265/H.264/MJPEG, P-iris, SFP

Quick Start Guide

C-mount adapter

Power connector

BC920

Unpack

Note 1 : Subject to modification. Actual product and accessories may differ in appearance.

Accessing the camera

Find the latest information, firmware and documentation at: siqura.com

Installation notices

CAUTION:

INSTALLATION SHALL BE PERFORMED BY QUALIFIED PERSONNEL

ONLY.

CONNECT POE TO UNEXPOSED NETWORKS.

INSTALLATION SHALL BE IN ACCORDANCE WITH LOCAL

PROCEDURES.

THE CAMERA CONTAINS IRREPLACEBLE BATTERIES, DISPOSE OF

THE CAMERA IN ACCORDANCE WITH LOCAL REGULATIONS.

IF YOU USE AN EXTERNAL POWER SUPPLY, CONTACT SIQURA TO

MAKE SURE THAT THE POWER SUPPLY HAS THE PROPER POWER

SPECIFICATIONS.

NOTE:

IT IS NOT RECOMMENDED TO CONTINUOUSLY (24/7) RECORD ON THE MICRO

SD CARD, AS THE CARD MAY NOT SUPPORT LONG-TERM CONTINOUS DATA

READ/WRITE. CONTACT THE MANUFACTURER OF THE MICRO SD CARD FOR

INFORMATION ABOUT THE CARD’S RELIABILITY AND LIFE EXPECTANCY.

Auto-detect with SDM2

Audio I/O

Reset button

P-Iris control

Connectors and reset button

Empty SFP cage. Slidein required SFP

Composite video out microSD card slot

Digital I/O

, see below pinning:

12Vdc/24Vac power in

1 st time camera login

1

Admin

1234

Set a strong password

NOTE:

IF PoE IS USED, MAKE SURE PSE IS IN USE IN THE NETWORK.

NOTE:

IN SOME CASES, AN ETHERNET CROSSOVER CABLE MAY BE NEEDED WHEN

CONNECTING THE CAMERA DIRECTLY TO THE PC.

CHECK THE STATUS OF THE POWER AND THE NETWORK ACTIVITY INDICATOR

LEDS. IF A LED IS UNLIT, CHECK THE CORRESPONDING CONNECTION.

© Siqura B.V. 2018

Version 1.02 (182711-2) bc920 QSG

2 siqura.com

Install browser-based viewer

3

4

Set OCX Protocol

If the IE web interface is not showing video you might need to open your firewall or set the OCX protocol to RTP-over-RTSP(TCP)

Using the Web Viewer