advertisement
◉
Touch to zoom
www.ronda-startech.com 60 30 Cal. 5040.D 45 20 15 10 30 9 10 1 8 7 2 3 6 5 21 4 Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW) Accuracy: +20 / -10 seconds per month English User’s Manual In case your watch needs to be repaired or to raise claims under a guarantee, please contact the point of sales Description of the display and control buttons Minute counter 45 20 (Start / Stop / Reset) 60 30 Control buttons Display elements Chronograph: Basic function Push-button A Example: Start: Press push-button A. 15 10 30 9 10 1 Second hand 8 7 6 Minute hand Push-button A Hour hand 60 30 45 20 Centre stop-second 15 30 9 10 1 8 7 2 3 6 5 push-button A once more and read the 3 chronograph counters: 4 min / 38 sek / 7⁄10 sec 4 ⁄10 second counter Crown 10 Minute counter 1 1 5 Stop: to stop the timing, press 21 2 3 Zero positioning: 21 Push-button B 4 45 20 ⁄10 second counter Press push-button B. (The 3 chronograph hands will be reset to their zero positions). 60 30 15 10 30 9 10 1 (hour counter after 30 minutes) 8 7 21 2 3 6 Date 5 4 Push-button B Chronograph: Accumulated timing Minute counter Push-button A 60 30 45 20 15 10 30 9 10 1 8 7 1 21 2 3 6 5 Example: Start: (start timing) Stop: (e.g. 15 min 5 sec following ) 45 * Stop: ⁄10 second counter (e.g. 13 min 5 sec following ) = 28 min 10 sec Example: Start: (start timing) Display interval: e.g. 10 minutes 10 seconds (timing continues in the background) * Making up the measured time: (the 3 chronograph hands are quickly advanced to the ongoing measured time). Stop: (Final time is displayed) Reset: The 3 chronograph hands are returned to their zero position 15 10 30 9 10 1 8 7 Restart: (timing is resumed) 4 60 30 20 Chronograph: Intermediate or interval timing Push-button A Minute counter 1 21 2 3 6 5 4 Push-button B ⁄10 second counter (The accumulated measured time is shown) Reset: 45 20 The 3 chronograph hands are returned to their zero positions. 60 30 15 10 Please note: * Following , the accumulation of the timing can be continued by pressing push-button A (Restart / Stop, Restart / Stop, …) 30 9 10 1 8 7 21 2 3 6 5 4 Push-button B Minute counter Centre stop-second 45 15 10 30 9 10 1 8 7 6 1 21 2 3 5 I II 45 III 9 10 1 8 7 6 5 Push-button B Adjusting the next hand B 앗 A 앗 45 15 30 9 10 1 III 21 2 3 앗 A Returning the crown to position I I Termination of the chronograph hands adjustment (can be carried out at any time). III II Push-button B 45 20 Setting the date (quick mode) Setting the time Second hand 60 * Pull out the crown to position III 45 20 6 5 continues to run). 15 30 21 2 3 Pull out the crown to position II (the watch 10 30 9 10 1 60 30 (the watch stops). 15 10 8 7 Adjusting the minute counter (position 9h) A 1 x short Single step A long Continuous 앗 앗 4 30 Adjusting the 1⁄10 second counter hand (position 6h) A 1 x short Single step A Continuous long Adjusting the next hand B B simultaneously for at least 2 seconds (the centre stop-second rotates by 360° 씮 corrective mode is activated). 10 5 Adjusting the centre stop second A 1 x short Single step A long 앗 Continuous B Keep push-buttons A and B depressed 6 앗 A (all 3 chronograph hands are in their correct or incorrect zero position). 60 8 7 4 Push-button A 20 21 2 3 Adjusting the chronograph hands to zero position ⁄10 second counter Please note: * Following , further intervals or intermediates can be displayed by pressing push-button B (display interval / make up measured time, ...) 30 Pull out the crown to position III 4 30 15 10 Example: One or several chronograph hands are not in their correct zero positions and have to be adjusted (e.g. following a battery change). 60 30 20 60 30 20 I II 9 10 1 III 8 7 Turn the crown until you reach the correct 4 6 time 8:45. 31 2 3 5 I II Turn the crown until the correct 4 date 1 appears. * Push the crown back into position I. 45 20 60 30 15 10 30 9 10 1 8 7 21 2 3 6 5 I II III 4 Please note: * In order to set the time to the exact second, must be pulled out when the second hand is in position «60» (I). Once the hour and minute hands have been set, must be pushed back into position I at the exact second. Push the crown back into position I. 45 20 60 30 Please note: The date can be changed during the date changing phase between 9:00 PM and 12:00 PM; please note that the date must be set to the date of the following day as in this case the automatic date changing does not occur at midnight. 15 10 30 9 10 1 8 7 1 2 3 6 5 I II 4 Setting the date/time 앗 Second hand Crown 45 Example: – Date / time on the watch: 17 / 1:25 AM 4 / 8:30 PM – Present date / time: 60 30 20 15 10 30 9 10 1 8 7 17 2 3 6 5 I II 45 (the watch stops). 15 10 Turn the crown until the correct date 30 9 10 1 Pull out the crown to position II 8 7 (the watch continues to run). 4 * Pull out the crown to position III 60 30 20 3 2 3 6 5 I II III 4 4 correct time 8:30 PM appears. Date Push the crown back into position I. Turn the crown until yesterday’s date 60 30 45 20 appears. ** Continue to turn the crown until the 앗 60 30 45 20 10 2 3 6 5 4 15 10 30 30 9 10 1 8 7 appears 3 . 15 3 I II 9 10 1 8 7 2 3 6 5 4 4 I II III Please note: * To set your watch to the exact second, please refer to the chapter entitled «setting the time». ** Please observe the AM/PM clock rhythm. 11/2006 RONDA AG CH-4415 Lausen/Switzerland
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement