Location:

Dia

™

Tub-Shower System

S-3502-CYL-B

Specification Submittal

Feature Highlights

■ Symmons Tub-Shower System with Symmons Temptrol to limit handle turn

■ Screwless brass escutcheon (-B)

® pressure-balancing mixing valve with adjustable stop screw

■ Cylinder (-CYL) style lever handle

■ Showerhead, single mode #352SH

■ Mounting bracket and flange for showerhead

■ Standard flow rate is 2.5 gpm (9.5 L/min)

Optional lower flow rate restrictor available

■ Tub-spout 7 inches #067

■ Polished chrome finish (standard)

Model Numbers

☐ S-3502-CYL-B

Tub-Shower System with Symmons Temptrol valve p/n S-4002-BODY

☐ S-3502-CYL-B-TRM

Trim only, valve must be ordered separately

®

mixing

☐ S-4002-BODY

Symmons Temptrol ® mixing valve without trim

☐ S-4002-X-BODY

Symmons Temptrol ® valve without trim. Valve includes integral service stops to allow water shut-off for service

Options / Modifications

Append appropriate -suffix to model number

☐

-IPS IPS connections: 1/2 inch female IPS connections on Temptrol

☐ -X Service Stops: Temptrol i ncludes integral service stops to allow water shut-off for service, p/n S-4002-X-BODY

( Available when ordering model S-3502-CYL-B )

☐ -CHKS Check Stops: Temptrol ®

®

® mixing valve

mixing valve

mixing valve includes integral check stops

( Requires integral service stops, suffix -X .

Used in installations where a positive shut-off device is used downstream of mixing valve.)

☐ -REV Reverse core: Temptrol® mixing valve with reverse core. (Requires integral service stops, suffix -X . Used in back-to-back system installations. HOT on the right, COLD on the left)

☐ Delete

Suffix B

Chrome plastic escutcheon chrome plastic escutcheon is supplied instead of standard brass escutcheon

☐

☐

-2.0

Flow rate restrictor, 2.0 gpm (7.6 L/min)

-1.5

Flow rate restrictor, 1.5 gpm (5.7 L/min)

☐

-L/HD Showerhead not included,

Includes mounting bracket and flange

☐ 352SH-3 Showerhead is three-mode in place of standard single mode

☐

-SS Slip-on tub spout instead of standard #067

Finish Options / Modifications

Append appropriate -suffix to model number

☐ -STN

Satin nickel

-

Polished chrome (standard finish)

Standards / Certifications

ASME A112.18.1; CSA B125.1

Americans with Disabilities Act (ADA) compliant

Handle Options / Modifications

Append appropriate -suffix to model number

-LR -LP

Warranty

■ Limited Lifetime - to the original end purchaser in consumer installations

■ 5 years - for commercial installations

☐ -LR Lever handle

☐ -LP Loop style lever handle

Print

Email Reset Form

Dimensions

Dia Tub-Shower Systems,

S-3502-CYL-B

2-1/2" dia

(64 mm) finished wall

6-3/4"

(171 mm)

1/2"-14 NPT

HOT supply

5-1/2"

(138 mm)

Finished wall to pipe centerline

2-3/8" ± 1/2" (60 mm ±13 mm)

*see note (2)

Finished wall to rear of valve

3-1/2" ± 1/2" (89 mm ±13 mm

7-1/2" dia (191 mm) brass

7-3/4" dia (197 mm) chrome

Wall cutout hole size

3-1/2" (89 mm) min

4" (101 mm) max

3"

(76 mm)

COLD supply

12"

(305 mm)

2-7/8 ±½"

(72 mm ±13 mm)

1/2"-14 NPT approx

77"

(1956 mm) showerhead supply

5/8" (16 mm)

mounting plate

p/n T-177

* Note (1)

Temptrol control valve tub spout supply or supply plug hot / cold supply

* Notes:

2-1/2" dia

(64 mm)

(also reference page 2, figure 2 for details)

5-1/4"

(133 mm)

7"

(178 mm)

(1) Walls for using T-177 mounting plate (MP)

■ Wall thickness is 1/16 " (2 mm) min • 1/2" (13 mm) max

■ Fiber or acrylic walls (MP is required)

■ Plaster or other type walls 1/2" or less (MP optional)

■ Protective shield usage (optional for protection only)

(2) Dry wall, plaster or other type walls 1/2" or greater

■ Protective shield attached to valve spindle to locate position

(3) Dimensions subject to change without notice

Protective shield p/n T-176

32"

(813mm)

Floor

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800)796-6667 ■ Fax: (800)961-9621

Copyright © 2015 Symmons Industries, Inc.

■

Printed in U.S.A.

■

www.symmons.com

■

[email protected]

■

033015