Location:

Dia

™

Shower Valve System

3500-CYL-B

Specification Submittal

Feature Highlights

■ Symmons Shower Valve System with Symmons Temptrol to limit handle turn

®

pressure-balancing mixing valve with adjustable stop screw

■ Screwless brass escutcheon (-B)

■ Cylinder (-CYL) style lever handle

■ Polished chrome finish (standard)

Model Numbers

☐ 3500-CYL-B

Shower Valve System with Symmons Temptrol valve p/n 46-2-BODY

®

mixing

☐ 3500-CYL-B-TRM

Trim only, valve must be ordered separately

☐ 3500-CYL-B-REB-TRM

Rebuild kit, Trim only, includes TA-10 flow control spindle and TA-4 hot/cold seat

☐ 46-2-BODY

Symmons Temptrol ® mixing valve without trim

☐ 46-2X-BODY

Symmons Temptrol for service

® mixing valve without trim. Valve includes integral service stops to allow water shut-off

Options / Modifications

Append appropriate -suffix to model number

☐

☐

☐ Delete

Suffix B

Chrome plastic escutcheon on valve with color graphics/indicators in place of standard brass escutcheon

-IPS 1/2" female IPS connections

-LP Loop handle

☐

☐

☐

-LR Lever handle

-REB Rebuild trim kit, includes TA-10 and TA-4

-REV Reverse coring, hot on right, cold on left, for back to back installations

☐ -VP Vandal resistant escutcheon screws in place of standard screws

☐ -X Integral service stops - allows water shutoff at valve for service

☐ -X-CHKS Integral check stops - for use in installations where a positive shut-off device is used downstream of mixing valve

Finish Options / Modifications

Append appropriate -suffix to model number

☐ -STN

-

Satin nickel

Polished chrome (standard finish)

Standards / Certifications

ASME A112.18.1/CSA B125.1

Americans with Disabilities Act (ADA) compliant

Warranty

■ Limited Lifetime - to the original end purchaser in consumer installations

■ 5 years - for commercial installations

Dimensions Dia Shower Valve System, 3500-CYL-B

finished wall showerhead supply

Finished wall to pipe centerline

2-3/8" ± 1/2" (60 mm ±13 mm)

*See note (2)

Finished wall to rear of valve

3-1/2" ± 1/2" (89 mm ±13 mm showerhead supply

5/8" (16 mm)

Wall cutout hole size

3-1/2" (89 mm) min

4" (101 mm) min

valve mounting plate,

* Notes (1)(2)

Temptrol control valve

7-3/4" dia

(197 mm)

3"

(76 mm)

2-7/8 ±½"

(72 mm ±13 mm)

HOT supply

COLD supply

* Notes:

( 1) Walls for using T-177 mounting plate (MP)

■ Wall is 1/16 " (2 mm) min • 1/2" (13 mm) max

■ Fiber or acrylic walls (MP required)

■ Plaster or other type walls 1/2" or less (MP optional)

■ Protective shield usage (optional)

(2) Dry wall, plaster or other type walls 1/2" or greater

■ Protective shield is required; snaps on end of valve spindle...

(3) Dimensions subject to change without notice hot / cold supply

Protective Shield p/n T-176

Floor

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621

Copyright © 2016 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-1610 REV B ■ 120616