VMXP-6426

VMXP-6426

DM&P Vortex86MX+ 800MHz

3.5

” CPU Module

With

3S/4USB/VGA/LCD/LVDS/AUDIO/3LAN/GPIO/Printer/CF

512MB or 1GB DDR2 Onboard

User’s Manual

(Revision 1.1A)

www.microcomputersystems.com

C h a p t e r 1

Introduction

1.1 Packing List

Product Name

SOM304MX-6426

Package

HDD 44P (2.0) cable x 1

RS232 cable x 2

PRINT cable x1

USB cable x2

(USB port x 4

)

NET 4x2 (2.0) cable x 2

GPIO cable x 1

Audio cable x 2

PS/2 Y cable for KB and Mouse x 1

Screw Kit x 1

SOM304MP-VP

SOM304MP-VP CPU Module x1

SOM304MP-VP dev. kit with SOM304-6426 Vortex86MX+ 

1

1.3 Product Description

The SOM304MP-VP, low-power consumption x86 embedded controller is designed to meet 3.5”

Form Factor, and integrated with the following features.

 800 MHz Vortex86MX+ SoC

 Either VGA or TFT/ LVDS LCD support





HD Audio

SST NAND Flash Onboard (Opt.)

 512MB / 1GB DDR2 system memory

 Enhanced IDE (UltraDMA-100/66/33)

 10/100Mbps Ethernet

 USB 2.0 (host) x4









2 watchdog timer

PWM 16~24 channels

AMI BIOS

Single voltage +5V DC

 Up to 3serial ports

 Parallel port

 16-bit GPIOs

 Support extended operating temperature range of -20°C to +70°C

 The SOM304MP-VP embedded controller is designed with backward compatibility in mind, to provide migration path for projects facing end-of-life challenges with their existing x86 based controller. The SOM304MP-VP controller is designed to support legacy software to help extend existing product life cycle without heavy re-engineering.

 SOM304MP-VP is suitable for broad range of data-acquisition, Industrial automation,

Process control, Automotive controller, AVL, Intelligent Vehicle management device,

Medical device, Human machine interface, Robotics, Machinery control and any application that requires small footprint, low-power and low-cost hardware.


3.5” CPU Module

2

2.2 Connectors & Jumpers Location

Connectors


3.5” CPU Module

9

2.3 Connectors & Jumpers Summary

Summary Table

Nbr Description

J1 IDE Connector

Type of Connections Pin nbrs.

Box Header, 2.0

 ,20x2

40-pin

J2 CF Card Master/Slave Select

Pin Header, 2.54



, 2x1

J3 LINE-OUT

J4 VGA

Wafer, 1.25



, 4x1

D-Sub Female

2-pin

4-pin

15-pin

J5 MIC-IN

J6 USB 2

J7 PS/2 Keyboard / Mouse

J8 USB 1

Wafer, 1.25



, 4x1

USB connector

Mini-DIN Female

Box Header,2.0



, 5x2

4-pin

4-pin

6-pin

10-pin

10-pin

J9 USB 0/ USB 3 Box Header,2.0

 , 5x2

J10 10/100Base-T Ethernet LAN

RJ45 Connector

J11 GPIO ( Port 0 / 1 /PWMx16)

Box Header, 2.0



,10x2

J12 COM1

D-Sub Male

J13 RS-485

J14 COM3

Molex Header,2.54



, 3x1

Box Header, 2.0



5x2

8-pin

20-pin

9-pin

3-pin

10-pin

J15 PRINT

J16 COM4

J17 LVDS

J18 LCD

LED4

LED6

LAN Duplex LED ( Yellow )

SP1 BUZZER

S1 RESET SWITCH

Box Header, 2.0



, 13x2

Box Header, 2.0



5x2

Pin Header, 2.0



8x2

Box Header,2.0



,22x2

J19 Reset

J20 Power Connector

J25 LAN1 Enable/Disable

J26 LAN1

J27 LAN2 Enable/Disable

J28 LAN2

Pin Header, 2,54  ,1x2

Terminal Block 5.0



,2x1

Pin Header, 2.54



, 2x1

Pin Header, 2.54



, 2x1

Pin Header, 2.54

Pin Header, 2.54





, 2x1

, 2x1

CF1 Compact Flash

PWR

Power Active LED (Red)

LED

IDE Active LED (Green )

IDE-

LED

LED3

LED5

LAN Link/Active LED (Green)

Type I/II CF Connector

LED-SMD

LED-SMD

LED-SMD

LED-SMD

26-pin

10-pin

16-pin

44-pin

2-pin

2-pin

2-pin

8-pin

2-pin

8-pin

50-pin


3.5” CPU Module

10

J8: USB 1

Pin # Signal Name Pin # Signal Name

1

3

5

7

9

VCC 2

LUSBD1- 4

LUSBD1+

GND

GGND

6

8

10

VCC

GND

GND

GND

GGND

J9: USB 0/ USB 3


1

3

5

7

9

VCC 2 VCC

LUSBD3- 4 LUSBD0-

LUSBD3+ 6 LUSBD0+

GND

GGND

8

10

GND

GGND

J10: LAN /RJ45


1 TD+ 2 TD-

3

5

7

RO+

NC

NC

4

6

8

NC

RO-

NC

J11: GPIO (Port 0 / Port 1/PWMx16)

9

11

13

15

17

19


1

3

GND

GP00

2

4

VCC

GP10

5

7

GP01

GP02

6

8

GP11

GP12

GP03

GP04

GP05

GP06

GP07

VCC

10

12

14

16

18

20

GP13

GP14

GP15

GP16

GP17

GND


3.5” CPU Module

13

J18: LCD (DVO) Connector

37

39

41

43

29

31

33

35

21

23

25

27

13

15

17

19


1

3

+3.3V

LG2

2

4

+3.3V

LG3

5

7

9

11

LG4

NC

LR0

LR2

6

8

10

12

LG5

NC

LR1

LR3

LR4

GND

NC

NC

NC

LB0

LB2

LB4

14

16

18

20

22

24

26

28

LR5

NC

NC

GND

NC

LB1

LB3

LB5

NC

LG0

GND

NC

30

32

34

36

NC

LG1

GND

LCLK

NC

NC

38

40

LDE

LHSYNC

NC 42 LVSYNC

LBACKL 44 LVDDEN

J19: RESET


1 Reset 2 GND

J20: Power Connector (Terminal Block 5.0mm)

Pin # Signal Name

1

2

+5V

GND


3.5” CPU Module

16



SOM304MP-VP


3.5” CPU Module

18


3.5” CPU Module

23


3.5” CPU Module

24

2.6 Watchdog Timer

There are two watchdog timers in Vortex86SX/DX/MX+ CPU. One is compatible with M6117D watchdog timer and the other is new. The M6117D compatible watchdog timer is called WDT0 and new one is called WDT1.

We also provide DOS, Linux and WinCE example for your reference. For more technical support, please visit: http://www.dmp.com.tw/tech or download the PDF file: http://www.dmp.com.tw/tech/vortex86dx/


3.5” CPU Module

25

2.7 GPIO (General Purpose Input / Output)

40 GPIO pins are provided by the Vortex86SX/DX/MX+ for general usage in the system. All

GPIO pins are independent and can be configured as inputs or outputs, with or without pull-up/pull-down resistors.

We also offer DOS, Linux and WinCE example for your reference. For more technical support, please visit: http://www.dmp.com.tw/tech or download the PDF file: http://www.dmp.com.tw/tech/vortex86dx/


3.5” CPU Module

26

2.8 PWM (Pulse-width modulation)

Pulse-width modulation (PWM) of a signal or power source involves the modulation of its duty cycle, to either convey information over a communications channel or control the amount of power sent to a load.

The popular applications of pulse width modulation are in speed control of electric motors, volume control of Class D audio amplifiers or brightness control of light sources and many other power electronics applications.

The Vortex86DX /Vortex86MX+ SoC integrated 32 channels of PWM interface enabling the

Automation, robotic industry to a New Age x86 SoC platform and we also offer the sample code of PWM which will guide the engineer to control the PWM functionality smoothly.

For more inquire of this sample code that please contact our sales team or mail to: [email protected]


3.5” CPU Module

27

C h a p t e r 3

Driver Installation

VGA

The Vortex86MX+ processor is integrated RDC Display chip which is an ultra-low powered graphics chipset with total power consumption at around 1-1.5 W. It is capable in providing VGA display output up to 1600x1200. With DVO interface, developers could easily connect flat Panel to support TFT and LVDS output.

LAN

The Vortex86MX+ processor also integrated 10/100Mbps Ethernet controller that supports both

10/100BASE-T and allows direct connection to your 10/100Mbps Ethernet based Local Area

Network for full interaction with local servers, wide area networks such as the Internet.

The controller supports: Half / Full-Duplex Ethernet function to double channel bandwidth, auto media detection.

AUDIO

The ALC262 series are 4-Channel High Definition Audio Codecs with UAA (Universal Audio

Architecture) featuring two 24-bit stereo DACs and three 20-bit stereo ADCs, they are designed for high performance multimedia desktop and laptop systems. The ALC262 series incorporates proprietary converter technology to achieve over 100dB Signal-to-Noise ratio playback quality; easily meeting PC2001 requirements and also bringing PC sound quality closer to consumer electronic devices.

Operating system support

The Vortex86MX+ 6426 3.5” CPU board supports Embedded software: Free DOS, DOS 6.22,

Windows CE 6.0, Windows XP Professional, Windows Embedded standard (XPE) and Windows

2000 (SP4).

Vortex86MX+ 6426 also supports most of the popular Linux distributions, for more detail information, please visit DMP official website: http://www.dmp.com.tw/tech/vortex86mx/


3.5” CPU Module

28

Appendix

A. TFT Flat Panel Data Output


3.5” CPU Module

29

C. LVDS Flat Panel Support

Size

5.7”

7”

8.4”

10.4”

12.1”

Brand

Ampire

Ampire

AUO

AUO

AUO

Resolution

640x480

800x480

800x600

800x600

800x600

Model No.

AM-640480G4TNQW

AM-800480R3TMQW-A1H

G084SN03

G104SN02

G121SN01


3.5” CPU Module

31

F. BIOS Default setting

If the system cannot be booted after BIOS changes are made, Please follow below procedures in order to restore the CMOS as default setting.

 Press “End” Key, when the power on



Press <Del> to enter the AMI BIOS setup

 Press “F9” to Load Optimized Defaults



Press “F10” to Save configuration changes and exit setup


3.5” CPU Module

34

Warranty

This product is warranted to be in good working order for a period of one year from the date of purchase. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no additional charge except as set forth in the following terms. This warranty does not apply to products damaged by misuse, modifications, accident or disaster. Vendor assumes no liability for any damages, lost profits, lost savings or any other incidental or consequential damage resulting from the use, misuse of, originality to use this product. Vendor will not be liable for any claim made by any other related party. Return authorization must be obtained from the vendor before returned merchandise will be accepted.

Authorization can be obtained by calling or faxing the vendor and requesting a Return

Merchandise Authorization (RMA) number. Returned goods should always be accompanied by a clear problem description.


3.5” CPU Module

35

VMXP-6426

DM&P Vortex86MX+ 800MHz

3.5

” CPU Module

User’s Manual

www.microcomputersystems.com

Introduction

1.1 Packing List

1.3 Product Description

2.2 Connectors & Jumpers Location

Connectors

2.3 Connectors & Jumpers Summary

2.6 Watchdog Timer

2.7 GPIO (General Purpose Input / Output)

2.8 PWM (Pulse-width modulation)

Driver Installation

A. TFT Flat Panel Data Output

C. LVDS Flat Panel Support

Size

Brand

Resolution

Model No.

F. BIOS Default setting

Related manuals

VMXP-6427

VMXP-6453M

SOM304SX-VI

SOM304SX-PI

SOM304RD-PI

LG

2 Software