advertisement
4303-TRM, 4305-TRM, 4306-TRM
Sereno
®
Trim Series
Operation & Maintenance Manual
Model Numbers
4303-TRM
4305-TRM
4306-TRM
Shower
Hand Shower Trim
Shower Trim with Hand Shower
Tub/Shower Trim with Hand
Modifications
-1.5
1.5 gpm (5.7 L/min) flow restrictor
-2.0
2.0 gpm (7.6 L/min) flow restrictor
-432HSB 30" slide bar in place of wall cradle on hand shower units
Slip spout on any tub and shower -SS unit
-STN Satin nickel finish
Specifications
Tub/shower trim with hand shower and lever handle includes wall connection, cradle for hand shower mounting, in-line vacuum breaker, flexible metal hose, non-diverter tub spout, 1 mode hand shower and
1 mode showerhead with standard 2.5 gpm (9.5 L/min) flow restrictor. Shower trim with hand shower and lever handle includes all of the above less non-diverter tub spout. Valve trim with hand shower and lever handle includes all of the above less non-diverter tub spout and
3 mode showerhead. Components made from metal and nonmetallic materials plated in standard polished chrome finish.
Warranty
Limited Lifetime - to the original end purchaser in consumer/residential installations.
10 Years - for commercial/industrial installations. Refer to www.symmons.com/warranty for complete warranty information.
1
Note: Append appropriate -suffix to model number.
Dimensions
A
KK
FF
GG
HH
LL
BB
CC
NN
II
OO
PP
DD
RR
SS
VV
JJ
EE
TT
UU
O
P
Q
R
S
T
U
V
A
B
C
D
E
F
G
J
K
L
H
I
M
N
Measurements
Ø 2 1/4", 57 mm
Ø 2 1/4", 57 mm
6", 152 mm
9 1/4", 235 mm
Female 1/2" IPS thread must be recessed 7/8" from finished wall
6", 152 mm right or left
7", 178 mm
5", 127 mm
77", 1956 mm
4 3/4", 121 mm
5 3/4", 146 mm
9 1/4", 235 mm
10", 254 mm
Ø 2 3/8", 60 mm
32", 813 mm
(4306-TRM)
42", 1067 mm
(4303-TRM, 4305-TRM)
12", 305 mm
4 1/2", 114 mm
3 1/4", 83 mm
1/2" NPT
1/2", 13 mm
(Rough in)
2 3/8" ± 1/2", 60 mm ± 13 mm
8 1/2", 216 mm
2
Notes:
1) All dimensions measured from nominal rough-in (see U as reference).
2) Dimensions are subject to change without notice.
3
Parts Breakdown
C
E
F
B
A
D
M
G
H
K
I
J
H
G
K
I
J
L
L
N
Y U
O
W
X
P
Q
R
S
T
V
D
I
J
G
H
E
F
K
L
P
Q
R
S
T
U
Y
V
N
M
O
Item
A
X
B
C
Replacement Parts
Description Part Number
Vacuum Breaker
60" Hose
EF-104
Wall Elbow
Flange
T-444-KIT
432SH Showerhead
Shower Arm
Flange
Star Washer
Handle
Plug Button
Set Screw
Lock Nut
Dome Cover
Mounting Plate
Mounting Screws
Diverter Escutcheon
Cradle Mount
Cradle Mount Screws
Washer
Cradle Arm
Set Screw
Shower Escutcheon
Mounting Screws
Hand Shower
300
T-251
T-19/20-PL
T-529
T-545
T-249
432W
W Tub Spout 432TS
Notes:
1) Append -STN to part number for satin nickel finish.
2) Append -1.5 or -2.0 to showerhead or hand shower for low flow.
Required for Installation
Adjustable wrench
Phillips head screwdriver
Plumber tape
4
Installation
Note:
Four valve body installation, please see valve body installation guides.
1) Install shower escutcheon (U) to shower valve. Secure with two screws (Y).
Y
U
1
4) Install shower and diverter dome covers (L) to valves. Secure with lock nut (K).
6) Install tub spout (W) to pipe fitting.
Turn clockwise to secure.
1
L
1
W
2
K
1 7) Install wall elbow (B) and flange (C) to recessed pipe fitting. Turn elbow clockwise to tighten.
2
2
2
1
C 2) Attach mounting plate (O) to diverter valve (4305-TRM and
4306-TRM only). Secure with two screws (M).
5) Install diverter handle (4305-TRM and 4306-TRM only) and shower handle (H) to valves. Secure handle(s) with star washer (G) and screw (J). Attach plug button (I) to handle(s).
M
O
1
2
J
K
1
B
8) Press tab to remove mounting plate (P2) from cradle mount cover (P1).
1
P2
H
3) Attach diverter escutcheon (N) to plastic mounting plate (O).
1
P1 2
Note: Mounting plate (P2) center tabs must be horizontal for removal.
N
O
2
I
3
Note: Tabs should snap into place.
Notes: Handles should be facing the 6 o'clock position.
5
Installation
9) Place mounting plate (P2) in position, mark and drill 1/8" pilot holes into stud.
1
P2
2
11) Attach cradle arm (S) and washer (R) to cradle mount (P).
Secure with set screw (T).
P
2
R
1
S T
Option: Place mounting plate (P2) in position, mark and drill 3/16" holes
1
P2
12) Attach shower arm (E) and flange
(F) to vertical shower pipe turning clockwise to tighten.
2
F
1
E
2
3
14) Attach large end of hand shower hose (X) to hand shower (V).
Attach small end of hand shower hose (X) and gasket to in-line vacuum breaker (A). Connect in-line vacuum breaker to wall elbow (B). Turn clockwise to tighten.
V
X
1
A
X
3
B
4
2 into wall. Install anchors.
10) Install mounting plate (P2).
Secure with two screws (Q).
P2
1
Q 2
P2
P1
3
13) Install showerhead (D) to shower arm (E) turning clockwise to tighten.
D
1
E
2
Replace cradle mount cover (P1).
Note: Mounting plate (P2) center tabs must be horizontal for installation.
Operation
Temperature Control
1) Turn shower handle counterclockwise approximately
1/4 turn to put valve in cold position.
2) Turn shower handle counterclockwise approximately
1/2 turn to put valve in warm position.
3) Turn shower handle counterclockwise approximately
3/4 turn to put valve in hot position.
6
Care and Cleaning
1) Clean finished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse with water.
Troubleshooting Chart
Problem
Finish is spotting.
Cause
Elements in water supply may cause water staining on finish.
Solution
Clean finished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse with water.
Symmons Industries, Inc.
■
31 Brooks Drive
■
Braintree, MA 02184
■
(800)796-6667
■
Fax: (800)961-9621
Copyright © 2018 Symmons Industries, Inc.
■ www.symmons.com ■ [email protected] ■ ZV-3055 REV B 011722
advertisement
Related manuals
advertisement