Aeware in.k600 manual

Giving full control to wet fingers!

in.k600

™

series of full-function keypads with streamlined interfaces

TechBook

in.k600™ table of contents

Table of contents

overview..........................................................................................3

warning............................................................................................4

function.description.......................................................................5

icon.description..............................................................................7

.

installation

-.low.profile........................................................................10

.

-.drilling.templates..............................................................11

connections....................................................................................12

functions.........................................................................................13

specifications................................................................................. 18

1

in.k600™ overview

in.k600

™

Advance series of full-function keypads that gives complete control to wet fingers!

With.its.stunning.design,.Aeware’s®.in.k600™.series.of.advanced.

keypads.are.in.xm’s™.ultimate.user.interface..They.feature.a.low.

profile.with.a.large.LCD.displays,.streamlined.interfaces.that.let.

users.easily.control.all.in.xm™.functions.and.programming.directly.

from.spa.side,.creating.a.true.and.unique.Aeware®.user.experience.

directly.from.spa.side.

3

warning in.k600™

.

.

WARNINGS:

Before.installing.or.connecting.the.unit,.

please.read.the.following.

FAILURE TO COMPLY WITH THE FOLLOWING WARNINGS MAY

SIGNIFICANTLY SHORTEN THE PRODUCT’S LIFE TIME, AND

LEAD TO FAILURES AS WELL AS HAZARDOUS CONDITIONS*.

COMMON SENSE MUST ALWAYS PREVAIL WHEN EVALUATING

THE INSTALLATION AND/OR USE OF ANY ELECTRONIC

CONTROL IN A FINAL APPLICATION.

•.The.maximum.ambient.conditions.this.PRODUCT.is.subjected

. to.(temperature,.humidity,.etc.).are.not.to.be.exceeded.

•.This.PRODUCT.must.be.installed.by.qualified.personnel.

•.Only.qualified.personnel.are.to.service.this.PRODUCT.

. There.are.no.user.serviceable.parts.inside.

•.This.PRODUCT.is.only.compatible.with.Aeware’s®.in.pac™.line

. of.products.

•.This.PRODUCT.should.be.installed.on.a.clean.flat.surface.

•.The.gasket.on.the.back.of.the.unit.will.prevent.water.infiltration.

inside,.behind.the.mounted.surface..If.the.gasket.is.damaged,.

the.user.must.seal.the.back.of.the.unit.with.silicone.to.avoid.any.

leakage.behind.the.mounted.surface.

* HAZARDOUS CONDITION:

. A.condition.that.is.potentially.damaging.and/or.dangerous.to.

its.operator.or.surroundings..This.includes,.but.is.not.limited.

to:.fire,.flooding.or.other.water.damage,.dielectric.breakdowns.

(presence.of.high.voltage),.etc.

4

in.k600™

"Light".Key

"Ok".Key

"Plus".Key

"Program".Key

function description

"Right".Key

"Pump".Keys

"Economy.

Mode".Key

"Left".Key

"Minus".Key

"On/Off".Key

5

function description

"Light".Key

"Ok".Key

"Plus".Key

"Program".Key

in.k600™

"Pump"/.

"Right".Key

"Pump".Keys

"Pump"/

"Left".Key

"Minus".Key

"On/Off".Key

6

in.k600™

Light.icon

Pump.icons

Blower.icon

Time,.temperature

&.message.digits

Progress.bar.icon

Program.icon

Heating.icon

Filtering.icon

Economy mode.icon

Smart.winter

mode.icon

AM/PM.(˚F/.˚C)

Set.point.icon

Service.icon

icon description

7

icon description in.k600™

Icon Description

Light icon

The."Light".icon.lights.up.when.the.light.is.on..The.icon's.number.of.rays.is.proportional.to.

the.light's.intensity.

Pumps icons

The."Pump".indicator.numbers.light.up.and.their.icons.become.fast.animated.when.pumps.

are.in.high.speed,.slower.animated.icons.when.pumps.are.in.low.speed.

Blower icon

The."Blower".indicator.icon.become.animated.when.blower.is.on.

Service icon

A.problem.has.been.detected..Do.not.enter.the.water!.Spa.service.is.required.

Smart winter mode icon

The."SWM".icon.automatically.turns.on.when.freeze.protection.is.active...

It.flashes.while.system.purges.the.spa.plumbing.

Economy mode icon

The."Economy".icon.lights.up.when.filter.cycle.is.on

Filter Cycle icon

The."Filter.Cycle".icon.lights.up.when.filter.cycle.is.on..It.flashes.when.filtering.is.suspended.

8

in.k600™ icon description

Icon description

Heater icon

The."Heater".icon.lights.up.when.the.heater.is.on.

Progress bar

A.visual.indication.of.the.time.remaining.before.an.equipment.is.turned.off.or.before.the.

end.of.the.standby.mode.

Set Point icon

The."Set.Point".icon.automatically.turns.on.when.set.point.setting.menu.is.activated..

(SP.message.on.display)...It.flashes.when:

1-.there.is.a.call.for.heat.and.heater.has.not.started.yet,

2-.heater.has.just.turned.off.and.element.is.cooling.down.or

3.-.if.system.is.performing.a.check.flow..

Program icon

The."Program".icon.lights.up.when.Programming.

9

installation

Installation in.k600™ low profile

Gasket.with.or.without.

adhesive

7.250"

Optional.

wing.nuts.and.

spacers

3.750"

To.install.the.in.k600™.low.profile,.use.the.drilling.template.

provided.in.this.section..Determine.the.mounting.location.and.

stick.the.template.on.chosen.location..The.user.must.cut.out.a.

rectangular.shape.opening.of.7.250".by.3.750".according.to.the.

template.(see.illustration).

Clean.the.installation.surface.and.peel.the.adhesive.gasket.from.the.

back.of.the.keypad..

Insert.keypad.and.align.it.correctly,.then.ensure.it's.properly.glued.

by.gently.pressing.evenly.on.the.entire.surface.

10

in.k600™

in.k600™

90.49 mm

3.563"

15.88 mm

ø 0.625" TYP. 2X

184.15 mm

7.250"

180.98 mm

7.125"

92.08 mm

3.625"

driling template low profile

95.25 mm

3.750"

47.63 mm

1.875"

4.76 mm

R 0.188" TYP. 4x

connections

Connecting in.k600™ keypad to in.xm™ in.k600™

12

in.k600™ functions

On/Off key

Depending.on.the.spa.manufacturer,.this.key.may.have.different.functions:.On/Off,.Standby.

mode.or.quick.enable.of.the.

Economy.mode.

Standby Mode :.Use.On/Off.

key.to.pause.all.pumps*..

Progress.bar.will.display.the.

remaining.time.before.the.

system.automatically.exits.

Standby.mode.(user.can.also.

exit.Standby.mode.at.any.time.

by.pressing.again.on.On/Off.

key).

In.order.to.warn.the.user,.the.

spa.light.will.flash.for.a.few.

seconds.before.the.exit.of.

Standby.mode.and.restart.the.

pumps..The."Stby".message.is.

also.displayed.during.Standby.

mode.

* Pump will stay turned on if there is a request for more heat.

Pump 1 key

Press.Pump 1 key.to.turn

Pump.1.on.at.low.speed.

Press.a.second.time.to.turn.

pump.to.high.speed.(with.a.

dual-speed.pump).

A.third.time.turns.pump.off.

A.built-in.timer.automatically.

turns.pump.off.after.20.minutes,.unless.pump.has.been.

manually.deactivated.first.

Pump 2 key

Press.Pump 2 key.to.turn

Pump.2.on.at.low.speed.

Press.a.second.time.to.turn.

pump.to.high.speed.(with.a.

dual-speed.pump).

A.third.time.turns.pump.off..

A.built-in.timer.automatically.

turns.pump.off.after.20.minutes,.unless.pump.has.been.

manually.deactivated.first.

13

functions in.k600™

Pump 3/Blower key

Press.Pump 3/Blower.key.to.

turn.Pump.3/Blower.on.

Press.a.second.time.to.turn.

pump.off..

A.built-in.timer.automatically.

turns.pump.off.after.20.minutes,.unless.pump.has.been.

manually.deactivated.first.

Note: depending on spa manufacturer's requirements the number of outputs may vary.

Light key

Press.Light.key.to.turn.light.on.at.

high.intensity.

Subsequent.presses.change..

light.intensity.

A.last.press.turns.light.off.

A.built-in.timer.automatically.

turns.light.off.after.2.hours,.

unless.it.has.been.manually.

deactivated.first.

+/- keys

Use.(

+

) or.(

-

).key.to.set.desired.

water.temperature..The.temperature.setting.will.be.displayed.

for.5.seconds.to.confirm.your.

new.selection.

The."Set.Point".icon.indicates.

that.the.display.shows.the.

desired.temperature,.NOT.the.

current.water.temperature!

Program key

Use.Program key.to.display.

time.or.enter.Programming.

menu.by.pressing.and.holding.

key..In.Programming.mode,..

the.following.parameters.can.

be.set:.time,.filter.cycle's.start.

time,.duration.and.frequency,.

also,.Economy.mode's.start.

time.as.well.as.its.duration.

and.finally.the.choice.of.

temperature.display.unit.

14

in.k600™ functions

Setting the time

Enter.Programming.mode.by.

holding.Prog..key.pressed.

down.for.3.sec..The.display.will.

show.the.current.time.setting.

Setting the hour:

Use.(

+

) or.(

-

).key.to.change.hour.

setting.(AM/PM).

Setting the minutes:

Press.Prog..key.a.second.time.

Use.(

+

) or.(

-

hour.setting.

).key.to.change..

Setting filter cycle start time

To.program.the.filter.cycle,.you.

must.enter.these.parameters:.

the.start.time,.duration.and.

frequency..During.a.filter.

cycle,.pumps.run.for.one.minute.to.purge.the.plumbing,.

then.Pump.1.runs.for.the.

programmed.number.of.hours.

Press.Prog..key.a.third.time.

The.display.will.show.

with."xx".representing.the.

starting.hour.

FSxx

,.

Use.(

+

) or.(

-

).key.to.change.

setting.(0:00.h.-.23:00h).

Setting filter cycle duration

Press.Prog..key.a.fourth.time.

The.display.will.show.

with."xx".representing.the.

duration.in.hours.

Fdxx

,.

Use.(

+

) or.( setting..

-

).key.to.change.

Filter cycle frequency

Press.Prog..key.a.fifth.time.

The.display.will.show.FFxx,.with.

"xx".representing.the.number.of.

filter.cycles.per.day.(up.to.4).

Use.(

+

) or.( setting.

-

).key.to.change.

15

functions in.k600™

Setting Economy mode

The.Economy.mode.allows.you.

to.lower.the.temperature.set.

point.of.the.spa.by.20.°F

(11.°C).during.a.certain.period

of.the.day.

Press.Prog..key.a.sixth.time.

Use.(

+

) key.to.enable.the.

economy.mode,.the.display.

will.show.

EP 1

.

Use.(

-

) key.to.disable.economy.

mode,.the.display.will.show.

EP 0

.

Setting Economy start time

To.program.the.Economy.

mode,.you.must.enter.two

parameters:.the.start.time.and.

the.duration.

Press.Prog..key.a.seventh.time.

The.display.will.show.

with."xx".representing.the.

starting.hour.

ESxx

,.

Use..(

+

) or.(

-

).key.to.change.

setting.(0:00.h.-.23:00h).

Setting Economy duration

Press.Prog..key.an.eighth.time.

The.display.will.show.

with."xx".representing.the.

duration.in..hours.

Edxx

,.

Use.(

+

) or.( setting.

-

).key.to.change.

If.the.Economy.mode.is.not.

required.the.duration.must.be.

set.to."

0

"

.

If.continuous.activation.of.the.

Economy.mode.is.required.the.

duration.must.be.set.to."

24

".

When.in.Economy.mode,.the.

“Econ”.message.is.displayed.

16

in.k600™ functions

Setting temperature unit

Water.temperature.can.be.

displayed.in.either.Fahrenheit.

(˚F).or.Celsius.(˚C).

Press.Prog..key.an.nineth.time.

The.display.will.show.either

˚F.or.˚C.

Use.(

+

) or.( setting.

-

).key.to.change.

Press.Prog..key.a.last.time.to.go.

back.to.normal.mode.

Water temperature regulation

In.a.regulation.cycle,.the.system.

first.generates.water.flow.

through.the.heater.housing.

and.the.plumbing,.in.order.

to.ensure.accurate.water.

temperature.readings.as.well.as.

avoiding.heater.activation.in.dry.

conditions..

After.verifying.pump.activation.

and.taking.a.water.temperature.

reading.if.required,.the.system.

automatically.turns.the.heater.

on.to.reach.and.maintain.water.

temperature.at.Set.Point..

Cooldown

While.performing.these.tasks,.

the.heater.is.not.allowed.to.

turn.on.and.its.icon.flashes..

The.heater.is.not.allowed.also.

to.come.on.throughout.the.

cool.down.period.of.the.heater.

element.

Smart Winter Mode

Our.Smart.Winter.Mode.

protects.your.system.from.

the.cold.by.turning.pumps.on.

several.times.a.day.to.prevent.

water.from.freezing.in.pipes.

17

specifications

General specifications:

Environmentals:

Storage temperature:

85°C.(185°F).to.-30°C.(-22°F).

Operating temperature:

65°C.(149°F).to.-20°C.(-68°F)

Humidity:

up.to.95%.condensing

Mechanical Specs:

Weight:

0.4763.Kg.(1.05.lbs)

Dimensions (W.x.H.x.D): Front.panel

Low Profile: 8.726".x.4.227".x.0.200"

Standars: .

.

IP.ratings.IPX6

18

in.k600™

Specifications and design are subject to change without prior notice.

100%

Advanced electronics! Water resistance!

9919-100665

Rev. 12/10

© 2010 Groupe Gecko Alliance Inc.

TM trade-marks of/marques de commerce de Groupe Gecko Alliance Inc.

Gecko Alliance

450 des Canetons, Quebec City (QC) G2E 5W6 Canada, 1.800.78.GECKO

9225 Stellar Court, Corona, CA 92883 USA, 951.667.2000

www.geckoalliance.com