Samsung 940BE User manual

Install drivers Install programs

SyncMaster 740B / 940B / 740N / 940Fn / 540B / 940Be / 740T / 940T / 940N

Notational

Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment.

Prohibited

Do not disassemble

Do not touch

Important to read and understand at all times

Disconnect the plug from the outlet

Grounding to prevent an electric shock

Power

When not used for an extended period of time, set your computer to DPMS.

If using a screen saver, set it to the active screen mode.

Do not use a damaged or loose plug. z

This may cause an electric shock or fire.

Do not pull the plug out by the wire nor touch the plug with wet hands. z


Use only a properly grounded plug and receptacle. z

An improper ground may cause electric shock or equipment damage.

Insert the power plug firmly so that it does not come loose. z

A bad connection may cause fire.

Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. z


Do not connect too many extension cords or plugs to an outlet. z

This may cause fire.

Installation

Be sure to contact an authorized service center, when installing your monitor in a location with the heavy dust, high or low temperatures, high humidity, chemical substance and where it operates for 24 hours such as the airport, the train station or etc.

Failure to do so may cause a serious damage to your monitor.

Put your monitor in a location with low humidity and a minimum of dust. z

Failure to do so may cause an electric shock or fire inside the monitor.

Do not drop the monitor when moving it. z

This may cause damage to the product or human body.

Install the monitor base in a showcase or shelf so that the end of the base does not project beyond the showcase or shelf. z

Dropping the product may cause damage to the product or personal injury.

Do not place the product on an unstable or small surface area.

z

Place the product on an even, stable surface, as the product may fall and cause harm to someone walking by, specifically children.

Do not place the product on the floor.

z

Someone, specifically children could trip over it.

Keep any flammable objects such as candles, insecticides or cigarettes away from the product. z

Otherwise, this may cause a fire.

Keep any heating devices away from the power cable. z

A melted coating may lead to electric shock or fire.

Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc.

z

Any increase in internal temperature may cause fire.

Set down the monitor carefully. z

The monitor could be damaged or broken.

Do not place the monitor face down. z

The TFT-LCD surface may be damaged.

Installing a wall bracket must be done by a qualified professional. z z

Installation by unqualified personnel may result in injury.

Always use the mounting device specified in the owner's manual.

When installing the product, make sure to keep it away from the wall

(more than 10cm/4inch ) for ventilation purposes.

z

Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance.

Clean

When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric.

Do not spray water or detergent directly on the monitor. z

This may cause damage, electric shock or fire.

Use the recommended detergent with a smooth cloth.

If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. z

A dirty connector may cause an electric shock or fire.

Make sure to unplug the power cord before cleaning the product. z

Otherwise, this may cause electric shock or fire.

Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. z

Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent.

Contact the Service Center or Customer Center for interior cleaning once a year. z

Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or fire.

Others

Do not remove cover (or back).

z z


Refer servicing to qualified service personnel.

If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service .

z


Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. z z

This may cause malfunction, an electric shock or fire.

Especially avoid operating the monitor near water or outdoors where it could be exposed to snow or rain.

If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center .

z

The monitor may malfunction, causing an electric shock or fire.

Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. z

Failure to do so may cause an electric shock or fire.

Do not try to move the monitor by pulling only the wire or the signal cable.

z

This may cause a breakdown, electric shock or fire due to damage to

the cable.

Do not move the monitor right or left by pulling only the wire or the signal cable. z

This may cause a breakdown, electric shock or fire due to damage to the cable.

Do not cover the vents on the monitor cabinet. z

Bad ventilation may cause a breakdown or fire.

Do not place water containers, chemical products or small metal objects on the monitor. z z

This may cause malfunction, an electric shock or fire.

If a foreign substance enters the monitor, unplug the power cord and contact the Service Center .

Keep the product away from combustible chemical sprays or inflammable substances. z

This may cause an explosion or fire.

Never insert anything metallic into the monitor openings. z

This may cause an electric shock, fire or injury.

Do not insert metal objects such as chopsticks, wire and gimlet or inflammable objects such as paper and match into the vent, headphone port or AV ports. z

It may cause a fire or an electric shock. If an alien substances or water flows into the product, turn the product off, unplug the power connector from the wall outlet and contact service center .

If you view a fixed screen for an extended period of time, residual image or blurriness may appear. z

Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time.

Adjust the resolution and frequency to the levels appropriate for the model. z

Inappropriate resolution may cause undesirable picture quality.

15 inch - 1024 X 768

17,19 inch - 1280 X 1024

Watching the monitor continuously at a too close angle may result in eyesight damage.

To ease eye strain, take at least a five-minute break after every hour of

using the monitor.

Do not install the product on an unstable, uneven surface or a location prone to vibrations.

z

Dropping the product may cause damage to the product or personal injury. Using the product in a location prone to vibrations may shorten the lifetime of the product or may catch fire.

When moving the monitor, turn off and unplug the power cord.

Make sure that all cables, including the antenna cable and cables connecting to other devices, are disconnected before moving the monitor.

z

Failure to disconnect cables may damage it and lead to fire or an electric shock.

Place the product out of children’s reach, as they could damage it by hanging onto it. z

A falling product could cause physical damage even death.

When not using the product for an extended time period, keep the product unplugged. z

Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, leading to electric shock or fire.

Do not place children’s favorite objects (or anything else that may be tempting) on the product. z

Children may try to climb on the product to retrieve an object. The product could fall, causing physical damage or even death.

SyncMaster 740B / 940B / 540B

Please make sure the following items are included with your monitor.

If any items are missing,

contact your dealer

.

Contact a local dealer

to buy optional items.

Unpacking

Type 1

Type 2

Monitor & Simple stand Bottom

MagicRotation™ program can not be provided as Simple

Stand does not support Pivot function.

Type 3

Monitor & Pivot stand

Manual

Monitor & Sliding Stand

Cable

Quick Setup Guide

Warranty Card

(Not available in all locations)

User's Guide,

Monitor Driver,

Natural Color software,

MagicTune™ software

MagicRotation software

D-sub Cable Power Cord DVI Cable

(option)

Front

MENU button [ ]

MagicBright™

[ ]

Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu.

MagicBright™ is a new feature providing optimum viewing environment depending on the contents of the image you are watching. Currently six different modes are available: Custom,

Text, Internet, Game, Sport and Movie. Each mode has its own pre-configured brightness value. You can easily select one of six settings by simply pressing MagicBright control button.

1) Custom

Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste.

If this is the case, adjust the brightness and contrast by using the OSD menu.

2) Text

For documentations or works involving heavy text.

3) Internet

For working with a mixture of images such as text and graphics.

4) Game

For watching motion pictures such as a game.

5) Sport

For watching motion pictures such as a sport.

6) Movie

For watching motion pictures such as a DVD or Video CD.

>>Click here to see an animation clip

Brightness button

[ ]

Adjust buttons [

When OSD is not on the screen, push the button to adjust brightness.

] Adjust items in the menu.

Enter button [ ] /

Source button

Activates a highlighted menu item. /

Push the ' ', then selects the video signal while the OSD is off.

(When the source button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- analog or digital input signal.)

Note : If you select the digital mode, you must connect your monitor to the graphic card's DVI port using the DVI cable.

Rear

AUTO button Use this button for auto adjustment.

Power button [ ]/

Power indicator

Use this button for turn the monitor on and off. /

This light glows blue during normal operation, and blinks blue once as the monitor saves your adjustments.

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

Simple stand Pivot stand / Sliding Stand

(The configuration at the back of the monitor may vary from product to product.)

POWER port

DVI IN port

RGB IN port

Connect the power cord for your monitor to the power port on the back of the monitor.

Connect the DVI Cable to the DVI port on the back of your monitor.

Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.

Use this button for turn the monitor on and off.

POWER on/off Switch

(option)

Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately. )

For using a locking device, contact where you purchase it.

See Connecting the Monitor for further information regarding cable connections.

SyncMaster 740N / 940N




.



Unpacking

Type 1

Type 2




Type 3


Manual


Cable


Warranty Card


User's Guide,

Monitor Driver,




D-sub Cable Power Cord

Front

MENU button [ ]

MagicBright™

[ ]


[ ]


Enter button [ ]

]

AUTO button


Power indicator




1) Custom



2) Text


3) Internet


4) Game


5) Sport


6) Movie




Adjust items in the menu.

Activates a highlighted menu item.

Use this button for auto adjustment.



Rear


Simple stand Pivot stand / Sliding Stand


POWER port

RGB IN port





(option)




SyncMaster 940Fn


If any items are missing, contact your dealer .

Contact a local dealer to buy optional items.

Unpacking


Manual

Cable


Warranty Card


User's Guide,

Monitor Driver,




'DVI-A to D-sub' Cable Power Cord DVI Cable

Front

[

MENU button [ ]

MagicBright™

]




1) Custom



2) Text


3) Internet


4) Game


5) Sport


6) Movie




[ ]




Rear


Source button

AUTO button


Power indicator










POWER port

DVI IN port

RGB IN port

Power on/off Switch

(option)

Kensington Lock



Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.


The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately. )



SyncMaster 740T / 940T / 940Be




.



Unpacking

Type 1

Type 2




Manual


Cable


Warranty Card


User's Guide,

Monitor Driver,




D-sub Cable Power Cord DVI Cable

(option)

Front

MENU button [ ]

MagicBright™

[ ]




1) Custom

Although the values are carefully chosen by our engineers,

Rear the pre-configured values may not be comfortable to your eyes depending on your taste.


2) Text


3) Internet


4) Game


5) Sport


6) Movie




[ ]





Source button






AUTO button


Power indicator




Simple stand Sliding Stand


POWER port

DVI IN port

RGB IN port






(option)




SyncMaster 740B / 940B / 540B / 740T / 940T / 940Be

Connecting the Monitor

1.


Plug the power cord for the monitor into a nearby outlet.

2-1.

Using the D-sub (Analog) connector on the video card.


[ RGB IN ]

2-2.

Using the DVI (Digital) connector on the video card.

Connect the DVI Cable to the DVI Port on the back of your Monitor.

[ DVI IN ]

2-3.

Connected to a Macintosh.

Connect the monitor to the Macintosh computer using the D-sub connection cable.

2-4.

In the case of an old model Macintosh, you need to connect the monitor using a special Mac adapter.

3.

Turn on your computer and monitor. If your monitor displays an image, installation is complete.

Using the Stand

Monitor Assembly

Monitor and Bottom

Pivot Stand / Sliding Stand

A.Stand Stopper

Attaching a Base

This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.

Simple stand

A. Monitor

Pivot stand

Sliding Stand

B. Mounting interface pad

1. Turn off your monitor and unplug its power cord.

2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.

3. Remove four screws and then remove the stand from the LCD monitor.

4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base.

Installing the Monitor Driver (Automatic)

When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have.

Prepare a blank disk and download the driver program file at the Internet web site shown here. z

Internet web site : http://www.samsung.com/ (Worldwide) http://www.samsung.com/monitor (U.S.A) http://www.sec.co.kr/monitor (Korea) http://www.samsungmonitor.com.cn/ (China)

Windows ME

1. Insert CD into the CD-ROM drive.

2. Click "Windows ME Driver".

3. Choose your monitor model in the model list, then click the "OK" button.

4. Click the "Install" button in the "Warning" window.

5. Monitor driver installation is completed.

Windows XP/2000


2. Click "Windows XP/2000 Driver"


4. If you can see following message window, then click the "Continue Anyway" button.

Then click "OK" button.

This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung

Monitor momepage http://www.samsung.com/ .


Installing the Monitor Driver (Manual)

Windows XP | Windows 2000 | Windows Me | Windows NT | Linux




Microsoft

®

Windows

®

XP Operating System

1. Insert CD into the CD-ROM driver.

2. Click "Start" —> "Control Panel" then click the "Appearance and Themes" Icon.

3. Click "Display" icon and choose the "Settings" tab then click "Advanced..".

4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.

5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button.

6. Select "Don't search ,I will.." then click "Next" and then click "Have disk".

7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button.

8. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button.

This monitor driver is under certified MS logo,and this installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/

9. Click the "Close" button then click "OK" button continually.


Microsoft

®

Windows

®

2000 Operating System

When you can see "Digital Signature Not Found" on your monitor, follow these steps.

1. Choose "OK" button on the "Insert disk" window.

2. Click the "Browse" button on the "File Needed" window.

3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button.

How to install

1. Click "Start" , "Setting" , "Control Panel".

2. Double click the "Display" Icon.

3. Choose the "Settings" tab and then click "Advanced..".

4. Choose "Monitor".

Case1: If the "Properties" button is inactive, it means your monitor is properly configured.

Please stop installation

Case2: If the "Properties" button is active, click the "Properties" button then follow next steps continually.

5. Click "Driver" and then click on "Update Driver.." then click on the "Next" button.

6. Choose "Display a list of the known drivers for this device so that I can choose a

specific driver" then click "Next" and then click "Have disk".

7. Click the "Browse" button then choose A:(D:\Driver).

8. Click the "Open" button, then click "OK" button.

9. Choose your monitor model and click the "Next" button then click "Next" button.

10. Click the "Finish" button then the "Close" button.

If you can see the "Digital Signature Not Found" window then click the "Yes"button.

And click the "Finish" button then the "Close" button.

Microsoft

®

Windows

®

Millennium Operating System


2. Double click "Display" icon.

3. Select the "Settings" tab and click "Advanced Properties" button.

4. Select the "Monitor" tab.

5. Click the "Change" button in the "Monitor Type" area.

6. Choose "Specify the location of the driver".

7. Choose "Display a list of all the driver in a specific location.." then click "Next" button.

8. Click the "Have Disk" button

9. Specify A:\(D:\driver) then click "OK" button.

10. Select "Show all devices" and choose the monitor that corresponds to the one you connected to your computer and click "OK".

11. Continue choosing "Close" button and "OK" button until you close the Display Properties dialogue box.

Microsoft

®

Windows

®

NT Operating System

1. Click Start, Settings, Control Panel, and then double-click Display icon.

2. In Display Registration Information window, click Settings Tab and then click All Display

Modes.

3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click OK.

4. Click Apply button if you see the screen working normally after clicking Test. If the screen is not normal, change to a different mode (lower mode of resolution, colors or frequency).

If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide.

Linux Operating System

To execute X-Window, you need to make the X86Config file, which is a type of system setting file.

1. Press Enter at the first and the second screen after executing the X86Config file.

2. The third screen is for setting your mouse.

3. Set a mouse for your computer.

4. The next screen is for selecting a keyboard.

5. Set a Keyboard for your computer.

6. The next screen is for setting your monitor.

7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.)

8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)

9. Enter the model name of your monitor. This information will not affect the actual execution of X-Window.

10. You have finished setting up your monitor.

Execute X-Window after setting other requested hardware.

Natural Color

Natural Color

One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor.

The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics &

Telecommunications Research Institute (ETRI).

This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images.

For more information, refer to Help (F1) in the software program.

How to install the Natural Color software

Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial screen of the program Natural Color will be executed. Click Natural Color on the initial screen to install the Natural Color software.

To install the program manually, insert the CD included with the Samsung monitor into the CD-

ROM Drive, click the [Start] button of Windows and then select [Execute].

Enter D:\color\eng\setup.exe and then press the <Enter> key.

(If the drive where the CD is inserted is not D:\, enter the applicable drive.)

How to delete the Natural Color software program

Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a

program".

Select Natural Color from the list and then click the "Add/Delete" button.



1.



2-1.



[ RGB IN ]

2-2.


Connect the monitor to the Macintosh computer using the D-sub connection cable.

2-3.


3.


Using the Stand

Monitor Assembly

Monitor and Bottom

Pivot Stand / Sliding Stand

A.Stand Stopper



Simple stand

A. Monitor

Pivot stand

Sliding Stand










Windows ME






Windows XP/2000














Microsoft

®

Windows

®













Microsoft

®

Windows

®






How to install

















Microsoft

®

Windows

®













Microsoft

®

Windows

®




Modes.

















Natural Color

Natural Color














program".




1.



2-1.


Connect the 'DVI-A to D-sub' Cable to the D-sub port on the back of your monitor.

[ RGB IN ]

2-2.

Using the DVI (Digital) connector on the video card.


[ DVI IN ]

2-3.


Connect the monitor to the Macintosh computer using the 'DVI-A to D-sub' connection cable.

2-4.


3.


Using the Stand

Pivot Stand

A.Stand Stopper



A. Monitor










Windows ME






Windows XP/2000














Microsoft

®

Windows

®













Microsoft

®

Windows

®






How to install

















Microsoft

®

Windows

®













Microsoft

®

Windows

®




Modes.

















Natural Color

Natural Color














program".



1. Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu.

2. This button allows you to adjust items in the menu.

3. Press this button to activate a highlighted menu item.

4. Press to self-adjust to the incoming PC signal. The values of fine,coarse and position are adjusted automatically.

AUTO

Menu

AUTO

Description

When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center.

Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically.

(Available in analog mode only)

To make the automatic adjustment function sharper, execute the 'AUTO' function while the AUTO PATTERN is on.

- If auto adjustment does not work properly, press AUTO button again to adjust picture with more accuracy.

- If you change resolution in the control panel, auto function will be executed automatically.

OSD Lock & Unlock

Menu


Description

After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked).

You can also adjust the brightness and contrast of the monitor with the OSD adjustment locking feature.

MagicBright™

Menu

MagicBright™

Description

Push the MagicBright button to circle through available preconfigured modes.

- Six different modes (Custom/Text/Internet/Game/Sport/Movie)

Brightness

Menu

Brightness

Description


SOURCE

Menu

SOURCE

Description

Selects the video signal while the OSD is off.

Picture Brightness Contrast

Color

Image

OSD

Setup

Information

MagicColor

Coarse

Language

Color Tone

Fine

H-Position

Color Control

Sharpness

V-Position

Auto Source Image Reset Color Reset

Gamma

H-Position V-Position

Transparency Display Time

Picture

Menu

Brightness

Contrast

Description

You can use the on-screen menus to change the brightness according to personal preference.

Direct Access Feature : When OSD is not on the screen, push the button to adjust brightness.

You can use the on-screen menus to change the contrast according to personal preference.

( Not available in MagicColor mode of Full and Intelligent.

)

Play/Stop

Color

Menu

MagicColor

Description

MagicColor is a new technology that Samsung has exclusively developed to improve digital image and to display natural color more clearly without disturbing image quality.

1) Off - Returns to the original mode.

2) Demo - The screen before applying MagicColor appears on the right and the screen after applying

MagicColor appears on the left.

3) Full - Displays not only vivid natural color but also more realistic natural skin color with clearness.

4) Intelligent - Displays vivid natural color with clearness.

5) MagicZone - The MagicZone ensures the clear and sharp display of animated multimedia or photo images by enhancing the brightness, sharpness, saturation, hue of a certain area on the screen.

Especially, MagicZone is appropriate to using the moving picture.

Hue

: This function is to adjust the hue of the MagicZone.

Saturation

: This function is to adjust the saturation of the

MagicZone.

Brightness

: This function is to adjust the brightness of the

MagicZone.

Sharpness

: This function is to adjust the sharpness of the

MagicZone.

H-Position

: This function is to move the MagicZone horizontally.

V-Position

: This function is to move the MagicZone vertically.

H-Size

: This function is to adjust the horizontal size of the

MagicZone.

V-Size

Play/Stop

MagicZone

Hue

Saturation

Brightness

Sharpness

H-Position

V-Position

H-Size

V-Size

Color Tone

Color Control

Gamma

: This function is to adjust the vertical size of the

MagicZone.

The tone of the color can be changed and one of four modes can be selected - Cool, Normal, Warm and

Custom.


)

Adjusts individual R,G,B color balance.


)

Select one of three pre-defined gammas. z z z

Mode 1 : Shows normal gamma

Mode 2 : Shows higher gamma(brighter)

Mode 3 : Shows lower gamma(darker)

Image

Menu

Coarse

Fine

Sharpness

H-Position

V-Position

Description

Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu.


Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after adjusting the frequency (clock speed).


Changes the clearance of image.


)

Changes the horizontal position of the monitor's entire display.


Changes the vertical position of the monitor's entire display.

Play/Stop

OSD


Menu Description

You can choose one of eight languages.

Language

H-Position

V-Position

Transparency

Display Time

Note:The language chosen affects only the language of the OSD. It has no effect on any software running on the computer.

You can change the horizontal position where the OSD menu appears on your monitor.

You can change the vertical position where the OSD menu appears on your monitor.

Change the transparency of the background of the OSD.

The menu will be automatically turned off if no adjustments are made for a certain time period.

You can set the amount of time the menu will wait before it is turned off.

Play/Stop

Setup

Menu

Auto Source

Image Reset

Color Reset

Description

Select Auto Source for the monitor to automatically select the signal source.

Image parameters are replaced with the factory default values.

Color parameters are replaced with the factory default values.

Play/Stop

Information


Information Shows a video source, display mode on the OSD screen.



2. This button allows you to adjust items in the menu.



AUTO

Menu

AUTO

Description








Menu


Description



MagicBright™

Menu

MagicBright™

Description



Brightness

Menu

Brightness

Description


Picture

Color

Image

OSD

Setup

Information

Brightness

MagicColor

Coarse

Contrast

Color Tone

Fine

Language H-Position

Image Reset Color Reset

Color Control Gamma

Sharpness

V-Position



Picture

Menu

Brightness

Contrast

Description





)

Play/Stop

Color

Menu

MagicColor

Color Tone

Color Control

Gamma

Description









Hue


Saturation


MagicZone.

Brightness


MagicZone.

Sharpness


MagicZone.

H-Position


V-Position


H-Size


MagicZone.

V-Size


MagicZone.


Custom.


)



)





Play/Stop

MagicZone

Hue

Saturation

Brightness

Sharpness

H-Position

V-Position

H-Size

V-Size

Image

Menu

Coarse

Fine

Sharpness

H-Position

V-Position

Description







)





Play/Stop

OSD



Language

H-Position

V-Position

Transparency

Display Time







Play/Stop

Setup

Menu

Image Reset

Color Reset

Description



Play/Stop

Information

Menu

Information

Description

Shows a video source, display mode on the OSD screen.



2. This buttons allow you to adjust items in the menu.



AUTO

Menu

AUTO

Description








Menu


Description



MagicBright™

Menu

MagicBright™

Description



Brightness

Menu

Brightness

Description


SOURCE

Menu

SOURCE

Description

Selects the video signal while the OSD is off.

Picture Brightness Contrast

Color

Image

OSD

Setup

Information

MagicColor

Coarse

Language

Color Tone

Fine

H-Position

Color Control

Sharpness

V-Position

Auto Source Image Reset Color Reset

Gamma



Priority

Picture

Menu

Brightness

Contrast

Description





)

Play/Stop

Color

Menu

MagicColor

Description









Hue


Saturation


MagicZone.

Brightness


MagicZone.

Sharpness


MagicZone.

H-Position


V-Position


H-Size


MagicZone.

V-Size

Play/Stop

MagicZone

Hue

Saturation

Brightness

Sharpness

H-Position

V-Position

H-Size

V-Size

Color Tone

Color Control

Gamma


MagicZone.


Custom.


)



)





Image

Menu

Coarse

Fine

Sharpness

H-Position

V-Position

Description







)




Play/Stop

OSD




Language

H-Position

V-Position

Transparency

Display Time







Play/Stop

Setup

Menu

Auto Source

Image Reset

Color Reset

Priority

Description

Select Auto Source for the monitor to automatically select the signal source.



This is a source-switch function according to the priority that the user has set for the source.

Play/Stop

Information

Menu

Information

Description

Shows a video source, display mode on the OSD screen.

Overview | Installation | OSD Mode |

Color

Calibration

| Uninstall | Troubleshooting

Overview

What is MagicTune™?

Monitor performance can vary due to the graphics card, host computer lighting conditions and other environmental factors. In order to get the best image on a monitor requires you to adjust it for your unique setting. Unfortunately, the manual controls available to tune the image often prove to be challenging. Proper adjustment (tuning) requires an easy to use program that goes through a step-by-step process to obtain the best overall picture quality.

In most cases even simple adjustments to Brightness, or Contrast require navigation of the multi-level, onscreen display (OSD) menus that are not easy to understand. Furthermore, there is no feedback to assist in correctly setting the controls of the monitor. MagicTune™ is a software utility that guides you through the tuning process with easy to understand instructions and back ground patterns designed for each monitor control. The display settings for each user can be saved, providing an easy way to select display characteristics in a multi-user environme or having a single user have multiple defined presets based on content and ambient lighting.

Basic Functionality

MagicTune™ is a software utility that allows monitor adjustment and color tuning using the

Display Data

Channel Command Interface (DDC/CI)

protocol. All adjustments to the display are controlled via software to eliminate the need to use the monitor on-screen display (OSD).

MagicTune™ supports Windows™ 98 SE, Me, 2000, XP Home, and XP Professional.

It is recommended using MagicTune™ in Windows™ 2000 or later.

MagicTune™ allows for quick accurate tuning of the display with the ability to easily save and use monitor configurations that are best suited for you.

OSD Mode

The OSD mode allows easy adjustment of monitor settings without taking pre-defined steps. You can access the desired menu item to set with ease.


Color

Calibration


Installation

1. Insert the installation CD into the CD-ROM drive.

2. Click the MagicTune™ installation file.

3. Select installation Language, Click "Next".

4. When the InstallationShield Wizard window appears, click "Next."

5. Select "I agree to the terms of the license agreement" to accept the terms of use.

6. Choose a folder to install the MagicTune™ program.

7. Click "Install."

8. The "Installation Status" window appears.

9. Click "Finish."

10. When the installation is complete, the MagicTune™ executable icon appears on your desktop.

Double-click the icon to start the program.

MagicTune™ execution icon may not appear depending on specification of computer system or monitor. If that happens, press F5 Key.

Installation Problems

The installation of MagicTune™ can be affected by such factors as the video card, motherboard and the network environment.

See "Troubleshooting" if you have trouble during installation.

System Requirements

OS z z z z z

Windows™ 98 SE

Windows™ Me

Windows™ 2000

Windows™ XP Home Edition

Windows™ XP Professional

It is recommended using MagicTune™ in Windows™ 2000 or later.

Hardware z z

32MB Memory above

25MB Hard disk space above

* For more information, visit the MagicTune™ website .


Color

Calibration


MagicTune™ allows for quick accurate tuning of the display with the ability to easily save and use monitor configurations that are best suited for you. z z z

OSD mode may appear inconsistent with the explanation in guidance book depending on specification of each monitor.

When Rotation is functioning, portion of MagicTune™ program may not operate normally.

AutoRotation : The screens display will automatically rotate when the monitor is rotated.

To execute Auto Rotation, it should be done as below. z

Please install both MagicRotation and MagicTune™ 3.6 programs in your computer. z

Launch MagicTune TM 3.6 z

Option → Preference → Click the small box in the enable task

tray menu. z

MagicTune TM control mode will be different according to monitor z models.

The permitted angle of rotation of the monitor is determined by the model of the monitor.

OSD Mode

The OSD mode makes the adjustment of settings on all monitors easy. When selected , each tab on top of the control window displays the general descriptions of the sub-menu items for adjustment.

When selected, each tab displays a list of menus. For quick adjustment of the monitor settings, the OSD mode allows easy and convenient access to all tabs and sub-menu items.

Button Tab Definition

OK Applies any changes made and exits MagicTune™.

Reset

Cancel

Restores the display settings to the factory settings.

Exits MagicTune™ without applying the changes made. If you have not made any changes in the control window, clicking "Cancel" does not cause any actions.

Picture Tab Definition

Allows the user to adjust the screen settings to the desired values.

Brightness

Contrast

Resolution

Makes the entire screen brighter or darker. The detailed data of the images in the dark areas can be lost if the brightness is not adjusted to the proper level. Adjust the brightness for best viewing conditions.

Adjusts the difference in brightness between the bright and dark areas on screen. Determines the crispness of the images.

Lists all display resolutions supported by the program.

MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Text, Internet,Game, Sport,

Movie and Custom. Each mode has its own pre-configured brightness value. You can easily select one of six settings by simply pressing MagicBright control buttons.

MagicBright™

1. Text: For documentations or works involving heavy text.

2. Internet: For working with a mixture of images such as text and graphics.

3. Game : For watching motion pictures such as a Game.

4. Sport : For watching motion pictures such as a Sport.

5. Movie: For watching motion pictures such as a DVD or Video CD.

6. Custom: Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the

Brightness and Contrast by using the OSD menu.

MagicBright control mode will be different according to monitor models.

Some monitor will only support Four modes(Text, Internet, Entertain, Custom)

Color Tab Definition

Adjusts the "warmth" of the monitor background or image color.

MagicColor and Gamma will be shown only in the monitor that supports these functions.

Color Tone

The tone of the color can be changed. z z

Warm2 - Warm1 - Cool 1 - Cool 2 - Cool 3 - Cool 4 - Cool 5 - Cool 6 - Cool 7

Off

Color Tone mode will be different according to monitor models.

Some monitor will only support Four modes( Warm, Normal, Cool, Custom)

Adjusts of the monitor image color.

You can change the monitor color to your desired color.

Color

Control z

R- G - B

The process through which the colors of your choice are optimized and maintained. You will find

Calibration MagicTune™ extremely useful if you are one of those who wish to view images with their full details accurately reproduced - including web images and ones produced by a digital camera or scanner.


1. OFF : Returns to the original mode.

2. DEMO : The screen before applying MagicColor appears on the right and the screen after applying MagicColor appears on the left.

3. Full : Displays not only vivid natural color but also more realistic natural skin color with clearness.

4. Intelligent : Displays vivid natural color with clearness.

5. MagicZone

{

The MagicZone ensures the clear and sharp display of animated multimedia or photo images by enhancing the brightness, sharpness, saturation, Hue of a certain area on the screen. This offers an easy-to-use interface that highlights the video-playing portion of your multimedia program by automatically detecting and highlight the desired area by dragging.

{

{

{

{

When the mouse cursor is activated( )and it is necessary to de-activate it to use it for other tasks, right click your mouse, or put the activated cursor ( )on the taskbar and click. When de-activated, the icon on the screen changes back to the one shown before activation.


Auto Detect : If you run the Movie in some players, MagicZone will automatically get the play screen highlighted (it will be supported in players of Gom, Adrenalin, KCP,

Window Media, and Power DVD etc., )Some other players also can be highlighted but could have some problems.

Tusk menu

MagicColor

HUE Adjust the tint of the color.

Saturation Adjusts the color saturation.

Brightness Adjusts the Brightness.

Sharpness

Adjusts the difference between the lightest and darkest areas of the display.

Zone Off Turn off the zone that you have captured.

Reset Returns to the the default setting that vendor has set. z z z

Depending on the monitor models Color Control, Sharpness, Contrast,

Color Tone will not be adjustable in MagicColor mode of Full and Intelligent.

MagicTune™ will be disappear if you excute MagicZone, and closing the

MagicZone after adjusting, will show the MagicTune™ again.

(System Tray is Unhecked)

MagicTune™ will be disappear if you excute MagicZone, and closing the

MagicZone after adjusting. will not show MagicTune™ again.

(System Tray is Checked)

MagicColor mode will be different according to monitor models.

MagicZone mode will show if the monitor supports the function.

Gamma

Adjusts the gamma value.

Gamma mode will be different according to monitor models. Some monitor will only

support Three modes( Mode1, Mode2, Mode3) z z z




Image Tab Definition

Adjusts the Fine , Coarse and Position values.

Image Setup

Image Setup

Position

Sharpness l Position Sharpness z z z

Fine : Removes noise such as horizontal stripes.

If the noise persists even after Fine tuning, repeat it after adjusting the frequency

(clock speed).

Coarse : Removes noise such as vertical stripes.

Coarse adjustment may move the screen image area.

You may relocate it to the center using the Horizontal Control menu.

Auto Setup : Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically.

Adjusts the screen location horizontally and vertically.


Option Tab Definition

You can configure MagicTune™ using the following options.

Preferences

Source Select

Loads the Preferences Dialog Box. Preferences in use will have an "V" in the check box. To turn on or off any Preference, position the cursor over the box and click. z z

Enable task tray menu .

- To access the MagicTune™ menus, click the icon on the [task tray menu].

The menus are not displayed if the [Enable System Tray] is deselected in

[Options] ' [Basic Settings].

Select Language - The language chosen affects only the language of the OSD. z z

Analog

Digital

Support Tab Definition

Shows the Asset ID and the version number of the program, and allows you to use the Help feature.

Help

Asset ID

Visit the MagicTune™ website or click to open the Help files (User Manual) if you need any help installing or running MagicTune™. The User Manual opens within a basic browser window. you can use the server to control the Client monitor.

(Server program should be installed to use this program as Client)

Version

User Name

User ID

Server IP

Shows the user name that is registered in PC.

Shows the user ID that is register in PC.

Write down the server IP .

Department

Location

Write down the department.

Write down the location.

Displays the version of MagicTune™.


Color

Calibration


Color Calibration

1. Color Calibration

Color Calibration guides you to get optimal color condition for your monitor.

Proceed following 5steps for getting optimal monitor color condition .

1. Control "Brightness control bar" for matching the brightness of control patch and the brightness of background pattern

2. When you detect specific color tone on "Control patch", move the control cursor toward to the direction of the color tone referring to "Color reference Circle".

=> Adjustment is finished properly, you won't detect any color tone on Control patch.

3. When you finish adjustment for step1,Click "Next" button .

4. Repeat 1), 2), 3) procedures for remaining step2 ~ step5.

5. You can easily view the calibration effect through clicking "Preview " button!

How multiple users can use adjusted color values

Definition

When monitor is used by multiple users, color values which are adjusted via Color calibration for each users can be saved and used. Up to 5 users can use the saved color values.

1. How to save adjusted color values:

Press Next to make it change into Apply and then you can save adjusted color values.

As many as 5 values can be saved.

2. How to apply the saved color values:

Press Multi User button on main screen to select and use one of the saved color values.

2. Preview

Press "Preview" button on the Color Calibration.

The above picture will be shown.

1. Press "View Calibrated" button to see the calibration effect which you adjusted.

2. Press "View Uncalibrated" button to see the original image.


Color

Calibration


Uninstall

The MagicTune™ program can be removed only by using the "Add or Remove Programs" option of the

Windows™ Control Panel.

Perform the following steps remove MagicTune™.

1. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu. If the program runs on

Windows™ XP, go to [Control Panel] in the [Start] menu.

2. Click the "Add or Remove Programs" icon in Control Panel.

3. In the "Add or Remove Programs" screen, scroll down to find "MagicTune™." Click on it to highlight it.

4. Click the "Change/Remove" button to remove the program.

5. Click "Yes" to begin the uninstall process.

6. Wait until the "Uninstall Complete" dialog box appears.

Visit the MagicTune™ website for technical support for MagicTune™, FAQs (questions and answers) and software upgrades.


Color

Calibration

| Uninstall | Troubleshooting

Troubleshooting

The current computing system is not compatible with MagicTune™.

Please press OK and click on the "Shortcut to the MagicTune™ site" to view our home page for further reference.

An error may occur when your video/graphic card is not in the 'Available' list.

(The latest or oldest video cards may not be compatible.)

Please visit our homepage to see the Troubleshooting section.

An error may occur if the card maker has modified the video card driver or the graphics chip even when the video card is in the list.


Check if your monitor is manufactured by Samsung.

Products from other manufacturers may cause errors.

Only Samsung products are able to support this feature.

An error may occur even when your monitor is manufactured by Samsung but is out of date.

Check if your monitor is able to support MagicTune™.

This feature is only supported by those monitors that are registered on our homepage.

Check for the monitor before purchasing it as out-of-date models are not supported.

An error occurs when no information on EDID (Extended Display Identification

Data) exists for the current monitor.

This happens when from your desktop, Start > Setup > Control Panel > System >

Hardware > Device Manager > Monitor is selected, the current "Plug-and-play monitor" is removed and new hardware is searched for but the system couldn't find any "Plug-and-play monitor".


An error occurs when replacing the monitor with a new one when the system power is off but the system has not been restarted.

Please restart the system each time the monitor is replaced before using

MagicTune™.

An error occurs when the video card driver is not installed properly.

This happens when the current video card list is not displayed normally. You can check this via Start > Setup > System > Hardware > Device Manager > Display

Adapter.

Visit the video card maker's homepage and download and install the latest driver.

For more information about the video card, contact the card manufacturer.

To ensure normal operation, please restart your system.

An error occurs when the system is not restarted after installing MagicTune™.

(This is for Win98SE and WinMe only.)

Restart the system before use.

For the best performance of MagicTune™, adjust to the optimal resolution. Refer to the

User Guide for the optimal resolution.

If you do not adjust to the optimal resolution and perform Color Calibration, the monitor cannot be adjusted to the optimal condition.

Refer to the manual for the optimal resolution.

This video card does not support MagicTune™.

Please install a new video card driver.

An error occurs when the video card driver is not installed properly.

This happens when the current video card list is not displayed normally. You can check this from Start > Setup > System > Hardware > Device Manager > Display

Adapter.

Visit the video card manufacturer's homepage and download and install the latest driver.

For more information about the video card, contact the card manufacturer.

As the Highlight program uses the communication lines, please exit the Highlight program before you can access MagicTune™.

Some of Samsung CDT monitors support the Highlight feature.

When using both the Highlight feature and MagicTune™ simultaneously, conflicts occur, which cause errors.

Make sure to turn OFF Highlight before using MagicTune™.

Troubleshooting

z

MagicTune™ may not work in case monitor is replaced or driver of graphic card is updated while

MagicTune™ is operating. If so, please restart the system.

Symptom

Check when

MagicTune™ does not function properly.

Check List

MagicTune™ feature is found only on PC (VGA) with Window OS that supports Plug and Play.

Solutions

* To check whether your PC is available for

MagicTune™ feature, follow the

steps below (When Windows™ is XP);

Control Panel -> Performance and Maintenance

-> System -> Hardware -> Device Manager ->

Monitors -> After deleting Plug and Play monitor, find 'Plug and Play monitor' by searching new Hardware.

MagicTune™ is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with

MagicTune™ doesn't work properly.

Have you changed your

PC or video graphic card?

the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/MagicTune™

Download the latest program. The program can be downloaded http://www.samsung.com/monitor/MagicTune™ .

z z

Visit the MagicTune™ website for technical support for MagicTune™, FAQs (questions and answers) and software upgrades.

Visit the MagicTune™ website and download the installation software for MagicTune™ MAC.

Overview | Installation | Interface | Uninstall | Troubleshooting

Overview

What is MagicRotation?

Traditionally, computer displays allowed the user to view only in landscape mode.

In today's information age, more users need to view documents, web pages, emails, etc. in there day to day life. These types of applications can be better viewed in portrait mode where the entire contents are available on the screen. This greatly improves the user's productivity allowing him the flexibility to switch between landscape and portrait modes.

The MagicRotation Software from Samsung Electronics, Inc. provides the user with a rotation feature (0, 90, 180, 270 orientation) that facilitates the optimum utilization of computer display screen, better viewing and improved user productivity.

Basic Function

MagicRotation will support Windows™ 98 SE, Me, NT 4.0, 2000, XP Home and XP Professional.

* Windows™ is registered trademark of Microsoft Corporation,Inc.


Installation

1. Insert the installation CD into the CD-ROM drive.

2. Click the MagicRotation installation file.

3. Select installation Language, Click "Next".

4. When the InstallShield Wizard window appears, click "Next."

5. Select "I accept the terms of the license agreement" to accept the terms of use.

6. Choose a folder to install the MagicRotation program.

7. Click "Install."

8. The "Setup Status" window appears.

9. Click "Finish."

Have to reboot the system in order for the MagicRotation to work properly.

10. When the installation is complete, the MagicRotation executable icon appears on your desktop.

Installation Problems

The installation of MagicRotation can be affected by the factors such as video card, motherboard and the network environment.

See "Troubleshooting" if you have trouble during installation.

Limitation

1. The "Display Driver" should be properly loaded for the MagicRotation to work properly.

The installed "Display Driver" should be the latest driver supplied by the vendor.

2. If some applications like Windows Media Player, Real Player, etc. are not displaying

movie files properly in 90, 180 and 270 orientations then do the following :

{

Close the application.

{

{

Select the Orientation (90, 180, 270) you want to view the application.

Relaunch the application.

In most cases this should fix the problem.

3. User Applications using OpenGL and DirectDraw (3D drawing) will not function as per the orientation mode selected (90, 180, 270). e.g. 3D games

4. DOS based applications in Full Screen Mode will not function as per the orientation mode selected (90, 180, 270).

5. Dual is not supported in Windows™ 98, ME, NT 4.0.

6. MagicRotation does not provide support for 24 bits per pixel (Bit depth/Color Quality).

7. If you are changing your Graphic Card it is recommended that you uninstall the

MagicRotation Software before doing so.

System Requirements

OS z z z z z z

Windows™ 98 SE

Windows™ Me

Windows™ NT 4.0

Windows™ 2000

Windows™ XP Home Edition

Windows™ XP Professional

Hardware z z

128MB Memory above(recommended)

25MB Free Hard disk space above

Service Packs z z

It is recommended that your System has the latest Service Pack installed.

For Windows™ NT 4.0, it is recommended to install Internet Explorer 5.0 and above with

Active Desktop component.

* For more information, visit the MagicRotation website .


Overview | Installation | Interface | Uninstall | Troubleshooting z z

When Rotation is functioning, portion of MagicTune™ program may not operate normally.

AutoRotation : The screens display will automatically rotate when the monitor is rotated. z z z

To execute Auto Rotation, it should be done as below.

Please install both MagicRotation and MagicTune™ 3.6 programs in your computer.

Launch MagicTune 3.6

Option → Preference → Click the small box in the enable task tray

menu. z z

MagicRotation™ program can not be provided as Simple Stand does not support Pivot function.

The permitted angle of rotation of the monitor is determined by the model of the monitor.

Interface

Task Bar Menu

Menu pops up when the right mouse button is click.

Rotate : Display will get rotated by the unit of 90 degree.

Rotate to 0 : Display will get rotated to 0 degree from the current angle of

Rotation.

Rotate to 90 : Display will be rotated 90 degrees from the current angle.



Hot key : Hot Keys are available by default and can be changed by user.

It can be assigned by user directly with keyboard after changing the existing

HotKey . User can create the hot key with the combination of Shift, Ctrl, Alt and general keys. In case only general key is pressed, it will be assigned in the form of

Alt+general key.

Help : Shows the HELP of MagicRotation program.

About : Shows the version and copyright of MagicRotation program.

Exit : Exits from MagicRotation program.


Uninstall

The MagicRotation program can be removed only by using the "Add/Remove Programs" option of the Windows Control Panel.

Perform the following steps to remove MagicRotation.

1. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu.

If the program runs on Windows™ XP, go to [Control Panel] in the [Start] menu.

2. Click the "Add/Remove Programs" icon in Control Panel.

3. In the "Add/Remove Programs" screen, scroll down to find "MagicRotation"

Click on it to highlight it.

4. Click the "Change/Remove" button to remove the program.

5. Click "Yes" to begin the uninstall process.

6. Wait until the "Uninstall Complete" dialog box appears.

7. After uninstall restart the system to complete the uninstallation.

Visit the MagicRotation website for technical support for MagicRotation, FAQs (questions and answers) and software upgrades.


Overview | Installation | Interface | Uninstall | Troubleshooting

Troubleshooting

Before You Call Technical Support

z

MagicRotation Software works with the installed "Display Driver" supplied by your

Graphic Card Vendor to provide screen rotation capabilities. If the installed "Display

Driver" is working incorrectly or has bugs in it, then these bugs would still exist even after MagicRotation Software is installed.

Any incorrect/random behaviour resulting due to problems in the installed "Display

Driver" are not due to MagicRotation Software.

In order to verify if a problem exists in the installed "Display Driver" , you can perform the following diagnostic steps :

1. Check if the problem is occurring in both 0 orientation (Landscape mode) and 90 orientation (Portrait mode).

2. Check if the problem occurs with different color depths (8/16/32 bits per pixel) and different resolution modes (800 x 600, 1024 x 768).

3. Check if the problem occurs without installing MagicRotation Software.

If the problem is repeating in any/all of the following scenarios then it may be the problem with your installed "Display Driver" :

In order to correct the problem you need to perform the following steps :

1. Uninstall MagicRotation Software.

2. Obtain the latest "Display Driver" from your Graphic Card Vendor.

The latest "Display Driver" from (ATI, NVIDIA, MATROX, INTEL, etc.) are easily available for download from their respective websites.

3. Install the latest "Display Driver"

4. Install MagicRotation Software. In most of the cases this should correct the problem.

z

MagicRotation may not work in case monitor is replaced or driver of graphic card is updated while MagicRotation is operating.

If so, please restart the system. z

Visit the MagicRotation website for technical support for MagicRotation, FAQs (questions and answers) and software upgrades.


Check List

Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the

Information section or contact your dealer .

Symptom

No images on the screen. I cannot turn on the monitor.

Check List

Is the power cord connected properly?

Can you see "Check

Signal Cable" on the screen?

If the power is on, reboot the computer to see the initial screen(the login screen), which can be seen.

Can you see "Not

Optimum

Mode","Recommended mode 1280 x 1024 60Hz" on the screen?

Solutions

Check the power cord connection and supply.

(Connected using the D-sub cable)

Check the signal cable connection.

(Connected using the DVI cable)

If you still see an (error) message on the screen when the monitor is connected properly, check to see if the monitor status is set to analog.

Press Source button to have the monitor double-check the input signal source.

If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for

Windows ME/XP/2000) and then change the frequency of the video card.

(Refer to the Preset Timing Modes )

Note: If the initial screen (the login screen) does not appear, contact the Service Center or your dealer .

You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly.

Adjust the maximum resolution and frequency that the monitor can handle properly.

If the display exceeds SXGA or

75Hz, a "Not Optimum

I cannot see the On

Screen Display.

The screen shows strange colors or just black and white.

The screen suddenly has become unbalanced.

The screen is out of focus or OSD cannot be adjusted.

LED is blinking but no images on the screen.

Mode","Recommended mode

1280 x 1024 60Hz" message is displayed. If the display exceeds

85Hz, the display will work properly but the "Not Optimum

Mode","Recommended Mode

1280 x 1024 60Hz" message appears for one minute and then disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

The monitor is in PowerSaver mode. press a key on the keyboard to activate the monitor and restore the image on the screen.

There is no image on the screen.

Is the power indicator on the monitor blinking at 1 second intervals?

Connected using the DVI cable?

If there is still no image, press the

'Source' button.

Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

You may get a blank screen if you boot the system before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals.

Connect the DVI cable and then reboot the system.

Have you locked the On

Screen Display (OSD)

Menu to prevent changes?

Unlock the OSD by pressing the

MENU button for at least 5 seconds.

Is the screen displaying only one color as if looking at the screen through a cellophane paper?

Check the signal cable connection.Make sure the video card is fully inserted in it's slot.

Have the screen colors become strange after running a program or due to a crash between applications?

Reboot the computer.

Has the video card been set properly?

Have you changed the video card or the driver?

Set the video card by referring to the video card manual.

Adjust screen image position and size using the OSD.

Have you adjusted the resolution or frequency to the monitor?

Adjust the resolution and frequency at the video card.

(Refer to the Preset Timing Modes ).

The screen can be unbalanced due to the cycle of the video card signals.

Readjust Position by referring to the OSD.

Have you adjusted the resolution or frequency on the monitor?

Adjust the resolution and frequency of the video card.


Is the frequency properly adjusted when checking the Display Timing on the menu?

Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes .

(The maximum frequency per

There are only 16 colors shown on the screen.

The screen colors have changed after changing the video card.

Have the Windows colors been set properly?


resolution may differ from product to product.)

Windows ME/2000/XP:

Set the colors properly at the

Control Panel ˧ Display ˧

Settings.


There is a message that reads

"Unrecognized monitor, Plug & Play

(VESA DDC) monitor found".

Check when


Have you installed the monitor driver?


Install the monitor driver according to the Driver Installation Instructions .

See the video card manual to see if the Plug

& Play (VESA DDC) function can be supported.


* To check whether your PC is available for MagicTune™ feature, follow the

steps below (When Windows is

XP);




Control Panel -> Performance and

Maintenance -> System ->

Hardware -> Device Manager ->

Monitors -> After deleting Plug and

Play monitor, find 'Plug and Play monitor' by searching new

Hardware.

MagicTune™ is an additional software for the monitor. Some graphic cards may not support your monitor. When you have a problem with the graphic card, visit our website to check the compatible graphic card list provided. http://www.samsung.com/monitor/magictune

Download the latest program. The program can be downloaded http://www.samsung.com/monitor/magictune .

Visit the MagicTune™ website and download the installation software for MagicTune™

MAC.

Check the following items if there is trouble with the monitor.

1. Check if the power cord and the video cables are properly connected to the computer.

2. Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3. If you installed a new video card or if you assembled the PC, check if the installed the adapter

(video) driver and the monitor driver.

4. Check if the scanning ratio of the video screen is set at 56Hz ~ 75Hz.

(Do not exceed 75Hz when using the maximum resolution.)

5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel˧System˧Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

If problems repeatedly occur, contact an authorized service center .

Q & A

Question

How can I change the frequency?

Answer

Frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)

How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the Control

Panel˧Display˧Settings.

* Contact the video card manufacturer for details.

How can I set the Power Saving function?

Windows ME/XP/2000 : Set the function at BIOS-SETUP of the computer or the screen saver. (Refer to Windows/Computer

Manual).

How can I clean the outer case/LCD Panel?

Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water.

Do not leave any remains of the detergent nor scratch the case.

Do not allow any water to go inside the monitor.

Self-Test Feature Check

Self-Test Feature Check | Warning Messages | Environment | Useful Tips

Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.


1. Turn off both your computer and the monitor.

2. Unplug the video cable from the back of the computer.

3. Turn on the monitor.

If the monitor is functioning properly, you will see a box in the illustration below.

This box appears during normal operation if the video cable becomes disconnected or damaged.

4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.

If your monitor screen remains blank after using the previous procedure, check your video controller and computer system; your monitor is functioning properly.

Warning Messages

If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable.

Environment

The location and the position of the monitor may influence the quality and other features of the monitor.

1. if there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another room.

2. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the monitor.

Useful Tips z

A monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer. z

Judging the monitor's working condition

If there is no image on the screen or a "Not Optimum Mode","Recommended Mode 1280 x

1024 60Hz" message comes up, disconnect the cable from the computer while the monitor is still powered on.

{

{

If there is a message coming up on the screen or if the screen goes white, this means the monitor is in working condition.

In this case, check the computer for trouble.


Check List



Symptom


Check List






Optimum

Mode","Recommended

Mode 1280 x 1024 60Hz" on the screen?

Solutions


Check the signal cable connection.













1280 x 1024 60Hz" message appears for one minute and then

disappears.



I cannot see the On

Screen Display.







The monitor is in PowerSaver mode. There is no image on the screen.



press a key on the keyboard to activate the monitor and restore the image on the screen.

























(The maximum frequency per resolution may differ from product to product.)

Windows ME/2000/XP:



Settings.





Check when










XP);









Hardware.




MAC.











Q & A

Question


Answer








Manual).


















Environment




Useful Tips z





{

{



Check List



Symptom


Check List






Optimum

Mode","Recommended

Mode 1280 x 1024 60Hz" on the screen?

Solutions


(Connected using the 'DVI-A to D-

SUB' cable)

Check the 'DVI-A to D-SUB' cable connection.

(Connected using the DVI cable)

If you still see an error message on the screen when the monitor is connected properly, check to see if the monitor status is set to analog.

Press Source button to have the monitor double-check the input signal source.








I cannot see the On

Screen Display.










1280 x 1024 60Hz" message appears for one minute and then disappears.



The monitor is in PowerSaver mode. press a key on the keyboard to activate the monitor and restore the image on the screen.

There is no image on the screen.


Connected using the DVI cable?

If there is still no image, press the

'Source' button.

Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

You may get a blank screen if you boot the system before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals.

Connect the DVI cable and then reboot the system.




























(The maximum frequency per resolution may differ from product to product.)

Windows ME/2000/XP:



Settings.





Check when










XP);









Hardware.




MAC.











Q & A

Question


Answer









Manual).

















Environment




Useful Tips z





{

{



General

General

Model Name

LCD Panel

Size

Display area

Pixel Pitch

Type

Synchronization

Horizontal

Vertical

Display Color

16.2M Colors

SyncMaster 740B

17" Diagonal (43cm)

337.92mm (H) x 270.336mm (V)

0.264mm (H) x 0.264mm (V) a-si TFT active matrix

30 ~ 81 kHz

56 ~ 75 Hz

Resolution

Optimum resolution

Maximum resolution

1280 x 1024@60 Hz

1280 x 1024@75 Hz

Input Signal, Terminated

RGB Analog , DVI(Digital Visual Interface) Compliant Digital RGB

0.7Vp-p Positive at 75Ω +-10%

Separate H/V sync, Composite sync, TTL level positive or negative.

Maximum Pixel Clock

140 MHz

Power Supply

AC 100 to 240 VAC(+/- 10%) ,60/50Hz ± 3Hz

Signal Cable

15pin to 15pin D-sub cable, Detachable, 1.8m

DVI-D to DVI-D connector, Detachable, 2.0m (option)

Power Consumption

Less than 34W

Dimensions (WxDxH)/ Weight (Simple Stand)

366.0 x 200.0 x 391.2mm / 14.4 x 7.9 x 15.4inch (with Basic Stand) / 3.4kg

Dimensions (WxDxH)/ Weight (Pivot Stand)


Dimensions (WxDxH)/ Weight (Sliding Stand)


VESA Mounting Interface

75mm x 75mm (for use with Specialty(Arm) Mounting hardware.)

Environmental considerations

Operating Temperature: 50°F ~ 104°F(10°C ~ 40°C)

Humidity: 10% ~ 80%, non-condensing

Storage Temperature: -4°F ~113°F (-20°C ~ 45°C)


Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable

TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm

(one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness. z

For example, the number of TFT LCD sub pixels that is contained in this product are 3,932,160.

Note: Design and specifications are subject to change without prior notice.

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature.

State

Normal

Operation

Power saving mode

EPA/ENERGY

2000

Power off

(Power button)

Power off

(Power Switch)

Power Indicator Blue Blue, Blinking Black Black

Power

Consumption

Less than 34W

Less than 1W

(Off-mode)

Less than 1W

(120Vac/220 Vac)

Less than 0W

This monitor is EPA ENERGY STAR functionality.

®

compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS

As an ENERGY STAR

®

Partner, SAMSUNG has determined that this product meets the ENERGY STAR

®

guidelines for energy efficiency.

IBM, 640 x 350

IBM, 640 x 480

IBM, 720 x 400

MAC, 640 x 480

MAC, 832 x 624

MAC, 1152 x 870

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 1024

VESA, 1280 x 1024

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.

Table 1. Preset Timing Modes

Display Mode

Horizontal

Frequency

(kHz)

31.469

31.469

31.469

35.000

49.726

Vertical

Frequency

(Hz)

70.086

59.940

70.087

66.667

74.551

Pixel Clock

(MHz)

25.175

25.175

28.322

30.240

57.284

Sync Polarity

(H/V)

+/-

-/-

-/+

-/-

-/-

68.681 75.062 100.00 -/-

37.500 75.000 31.500 -/-

37.861 72.809 31.500 -/-

35.156 56.250 36.000 -/-

37.879 60.317 40.000 +/+

46.875 75.000 49.500 +/+

48.077 72.188 50.000 +/+

48.363 60.004 65.000 -/-

56.476 70.069 75.000 -/-

60.023 75.029 78.750 +/+

67.500 75.000 108.00 +/+

63.981 60.020 108.00 +/+

79.976 75.025 135.00 +/+

Horizontal Frequency

The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz

Vertical Frequency

Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called Vertical Frequency or Refresh

Rate. Unit: Hz

General

General

Model Name

LCD Panel

Size

Display area

Pixel Pitch

Type

Synchronization

Horizontal

Vertical

Display Color

16.7M Colors

SyncMaster 940B

19" Diagonal (48cm)

376.32mm (H) x 301.056mm (V)


30 ~ 81 kHz

56 ~ 75 Hz

Resolution

Optimum resolution

Maximum resolution

1280 x 1024@60 Hz

1280 x 1024@75 Hz




Separate H/V sync, Composite sync, SOG, TTL level positive or negative.


140 MHz

Power Supply

AC 100 to 240 VAC(+/- 10%) ,60/50Hz ± 3Hz

Signal Cable




Less than 38W
















Dot Acceptable





PowerSaver


State

Normal

Operation


EPA/ENERGY

2000

Power off

(Power button)

Power off

(Power Switch)


Power

Consumption

Less than 38W

Less than 1W

(Off-mode)

Less than 1W

(120Vac)

Less than 0W


®


As an ENERGY STAR

®


®


IBM, 640 x 350

IBM, 640 x 480

IBM, 720 x 400

MAC, 640 x 480

MAC, 832 x 624

MAC, 1152 x 870

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 1024

VESA, 1280 x 1024




Display Mode

Horizontal

Frequency

(kHz)

31.469

31.469

31.469

35.000

49.726

Vertical

Frequency

(Hz)

70.086

59.940

70.087

66.667

74.551

Pixel Clock

(MHz)

25.175

25.175

28.322

30.240

57.284

Sync Polarity

(H/V)

+/-

-/-

-/+

-/-

-/-

68.681 75.062 100.00 -/-

37.500 75.000 31.500 -/-

37.861 72.809 31.500 -/-

35.156 56.250 36.000 -/-

37.879 60.317 40.000 +/+

46.875 75.000 49.500 +/+

48.077 72.188 50.000 +/+

48.363 60.004 65.000 -/-

56.476 70.069 75.000 -/-

60.023 75.029 78.750 +/+

67.500 75.000 108.00 +/+

63.981 60.020 108.00 +/+

79.976 75.025 135.00 +/+





Rate. Unit: Hz

General

General

Model Name

LCD Panel

Size

Display area

Pixel Pitch

Type

Synchronization

Horizontal

Vertical

Display Color

16.2M Colors

SyncMaster 740N

17" Diagonal (43cm)

337.92mm (H) x 270.336mm (V)


30 ~ 81 kHz

56 ~ 75 Hz

Resolution

Optimum resolution

Maximum resolution

1280 x 1024@60 Hz

1280 x 1024@75 Hz


RGB Analog




140 MHz

Power Supply

AC 100 to 240 VAC(+/- 10%) ,60/50Hz ± 3Hz

Signal Cable



Less than 34W
















Dot Acceptable





PowerSaver


State

Normal

Operation


EPA/ENERGY

2000

Power off

(Power button)

Power off

(Power Switch)


Power

Consumption

Less than 34W

Less than 1W

(Off-mode)

Less than 1W

(120Vac/220 Vac)

Less than 0W


®


As an ENERGY STAR

®


®


IBM, 640 x 350

IBM, 640 x 480

IBM, 720 x 400

MAC, 640 x 480

MAC, 832 x 624

MAC, 1152 x 870

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 1024

VESA, 1280 x 1024




Display Mode

Horizontal

Frequency

(kHz)

31.469

31.469

31.469

35.000

49.726

Vertical

Frequency

(Hz)

70.086

59.940

70.087

66.667

74.551

Pixel Clock

(MHz)

25.175

25.175

28.322

30.240

57.284

Sync Polarity

(H/V)

+/-

-/-

-/+

-/-

-/-

68.681 75.062 100.00 -/-

37.500 75.000 31.500 -/-

37.861 72.809 31.500 -/-

35.156 56.250 36.000 -/-

37.879 60.317 40.000 +/+

46.875 75.000 49.500 +/+

48.077 72.188 50.000 +/+

48.363 60.004 65.000 -/-

56.476 70.069 75.000 -/-

60.023 75.029 78.750 +/+

67.500 75.000 108.00 +/+

63.981 60.020 108.00 +/+

79.976 75.025 135.00 +/+





Rate. Unit: Hz

General

General

Model Name

LCD Panel

Size

Display area

Pixel Pitch

Type

Synchronization

Horizontal

Vertical

Display Color

16.7M Colors

SyncMaster 940Fn

19" Diagonal (48cm)

376.32mm (H) x 301.056mm (V)


30 ~ 81 kHz

56 ~ 75 Hz

Resolution

Optimum resolution

Maximum resolution

1280 x 1024@60 Hz

1280 x 1024@75 Hz






140 MHz

Power Supply

AC 100 to 240 VAC(+/- 10%) ,60/50Hz ± 3Hz

Signal Cable

DVI-A to D-sub cable, Detachable, 1.8m

DVI-D to DVI-D connector, Detachable, 2.0m


Less than 40W

Dimensions (WxDxH)/ Weight











Dot Acceptable





PowerSaver


State

Normal

Operation


EPA/ENERGY

2000

Power off

(Power button)

Power off

(Power Switch)


Power

Consumption

Less than 40W

Less than 1.5W

(Off-mode)

Less than 1.2W

(120Vac)

Less than 0W


®


As an ENERGY STAR

®


®


IBM, 640 x 350

IBM, 640 x 480

IBM, 720 x 400

MAC, 640 x 480

MAC, 832 x 624

MAC, 1152 x 870

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 960

VESA, 1280 x 1024

VESA, 1280 x 1024




Display Mode

Horizontal

Frequency

(kHz)

31.469

31.469

31.469

35.000

49.726

Vertical

Frequency

(Hz)

70.086

59.940

70.087

66.667

74.551

Pixel Clock

(MHz)

25.175

25.175

28.322

30.240

57.284

Sync Polarity

(H/V)

+/-

-/-

-/+

-/-

-/-

68.681 75.062 100.00 -/-

37.500 75.000 31.500 -/-

37.861 72.809 31.500 -/-

35.156 56.250 36.000 +-/+-

37.879 60.317 40.000 +/+

46.875 75.000 49.500 +/+

48.077 72.188 50.000 +/+

48.363 60.004 65.000 -/-

56.476 70.069 75.000 -/-

60.023 75.029 78.750 +/+

67.500 75.000 108.00 +/+

60.000 60.000 108.00 +/+

63.981 60.020 108.00 +/+

79.976 75.025 135.00 +/+





Rate. Unit: Hz

General

General

Model Name

LCD Panel

Size

Display area

Pixel Pitch

Type

Synchronization

Horizontal

Vertical

Display Color

16.2M Colors

SyncMaster 540B

15" Diagonal(38cm)

304.1mm (H) x 228.1mm (V)


30 ~ 61 kHz

56 ~ 75 Hz

Resolution

Optimum resolution

Maximum resolution

1024 x 768@60 Hz

1024 x 768@75 Hz




Separate H/V sync, Composite sync, SOG(Option), TTL level positive or negative.


81 MHz

Power Supply

AC 100 to 240 VAC(+/- 10%) ,60/50Hz ± 3Hz

Signal Cable




Less than 25W














Dot Acceptable





PowerSaver


State Normal Operation


EPA/ENERGY 2000

Power off

(Power button)

Power Indicator Blue Black

Power Consumption Less than 25W

Blue, Blinking

Less than 1W

(115Vac)

Less than 1.5W

(230Vac)

(Off-mode)

Less than 1W

(115Vac)

Less than 1.5W

(230Vac)

This monitor is EPA ENERGY STAR

®

compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality.

As an ENERGY STAR

®


®





Display Mode

IBM, 640 x 350

IBM, 640 x 480

IBM, 720 x 400

MAC, 640 x 480

MAC, 832 x 624

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1024 x 768

Horizontal

Frequency

(kHz)

31.469

31.469

31.469

35.000

49.726

Vertical

Frequency

(Hz)

70.086

59.940

70.087

66.667

74.551

Pixel Clock

(MHz)

25.175

25.175

28.322

30.240

57.284

Sync Polarity

(H/V)

+/-

-/-

-/+

-/-

-/-





Rate. Unit: Hz

General

General

Model Name

LCD Panel

Size

Display area

Pixel Pitch

Type

Synchronization

Horizontal

Vertical

Display Color

16.7M Colors

SyncMaster 940Be

19" Diagonal (48cm)

376.32mm (H) x 301.056mm (V)


30 ~ 81 kHz

56 ~ 75 Hz

Resolution

Optimum resolution

Maximum resolution

1280 x 1024@60 Hz

1280 x 1024@75 Hz






140 MHz

Power Supply

AC 100 to 240 VAC(+/- 10%) ,60/50Hz ± 3Hz

Signal Cable




Less than 38W














Dot Acceptable





PowerSaver


State

Normal

Operation


EPA/ENERGY

2000

Power off

(Power button)

Power off

(Power Switch)

Blue Black Power Indicator

Power

Consumption

Less than 38W

Blue, Blinking

Less than 1.5W

(Off-mode)

Black

Less than 1W

(120Vac)

Less than 0W


®


As an ENERGY STAR

®


®


IBM, 640 x 350

IBM, 640 x 480

IBM, 720 x 400

MAC, 640 x 480

MAC, 832 x 624

MAC, 1152 x 870

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 1024

VESA, 1280 x 1024




Display Mode

Horizontal

Frequency

(kHz)

31.469

31.469

31.469

35.000

49.726

Vertical

Frequency

(Hz)

70.086

59.940

70.087

66.667

74.551

Pixel Clock

(MHz)

25.175

25.175

28.322

30.240

57.284

Sync Polarity

(H/V)

+/-

-/-

-/+

-/-

-/-

68.681 75.062 100.00 -/-

37.500 75.000 31.500 -/-

37.861 72.809 31.500 -/-

35.156 56.250 36.000 -/-

37.879 60.317 40.000 +/+

46.875 75.000 49.500 +/+

48.077 72.188 50.000 +/+

48.363 60.004 65.000 -/-

56.476 70.069 75.000 -/-

60.023 75.029 78.750 +/+

67.500 75.000 108.00 +/+

63.981 60.020 108.00 +/+

79.976 75.025 135.00 +/+





Rate. Unit: Hz

General

General

Model Name

LCD Panel

Size

Display area

Pixel Pitch

Type

Synchronization

Horizontal

Vertical

Display Color

16.2M Colors

SyncMaster 740T

17" Diagonal (43cm)

337.92mm (H) x 270.336mm (V)


30 ~ 81 kHz

56 ~ 75 Hz

Resolution

Optimum resolution

Maximum resolution

1280 x 1024@60 Hz

1280 x 1024@75 Hz






140 MHz

Power Supply

AC 100 to 240 VAC(+/- 10%) ,60/50Hz ± 3Hz

Signal Cable




Less than 34W


362.1 X 200.0 X 389.6mm / 14.4 x 7.9 x 15.3inch (with Basic Stand) / 4.6kg


362.1 X 200.0 X 389.6mm / 14.4 x 7.9 x 15.3inch (with Basic Stand) / 4.5kg










Dot Acceptable





PowerSaver


State

Normal

Operation


EPA/ENERGY

2000

Power off

(Power button)

Power off

(Power Switch)


Power

Consumption

Less than 34W

Blue, Blinking

Less than 1.5W

(Off-mode)

Black

Less than 1W

(120Vac/220 Vac)

Less than 0W


®


As an ENERGY STAR

®


®


IBM, 640 x 350

IBM, 640 x 480

IBM, 720 x 400

MAC, 640 x 480

MAC, 832 x 624

MAC, 1152 x 870

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 1024

VESA, 1280 x 1024




Display Mode

Horizontal

Frequency

(kHz)

31.469

31.469

31.469

35.000

49.726

Vertical

Frequency

(Hz)

70.086

59.940

70.087

66.667

74.551

Pixel Clock

(MHz)

25.175

25.175

28.322

30.240

57.284

Sync Polarity

(H/V)

+/-

-/-

-/+

-/-

-/-

68.681 75.062 100.00 -/-

37.500 75.000 31.500 -/-

37.861 72.809 31.500 -/-

35.156 56.250 36.000 -/-

37.879 60.317 40.000 +/+

46.875 75.000 49.500 +/+

48.077 72.188 50.000 +/+

48.363 60.004 65.000 -/-

56.476 70.069 75.000 -/-

60.023 75.029 78.750 +/+

67.500 75.000 108.00 +/+

63.981 60.020 108.00 +/+

79.976 75.025 135.00 +/+





Rate. Unit: Hz

General

General

Model Name

LCD Panel

Size

Display area

Pixel Pitch

Type

Synchronization

Horizontal

Vertical

Display Color

16.7M Colors

SyncMaster 940T

19" Diagonal (48cm)

376.32mm (H) x 301.056mm (V)


30 ~ 81 kHz

56 ~ 75 Hz

Resolution

Optimum resolution

Maximum resolution

1280 x 1024@60 Hz

1280 x 1024@75 Hz






140 MHz

Power Supply

AC 100 to 240 VAC(+/- 10%) ,60/50Hz ± 3Hz

Signal Cable




Less than 38W














Dot Acceptable





PowerSaver


State

Normal

Operation


EPA/ENERGY

2000

Power off

(Power button)

Power off

(Power Switch)


Power

Consumption

Less than 38W

Blue, Blinking

Less than 1.5W

(Off-mode)

Black

Less than 1W

(120Vac)

Less than 0W


®


As an ENERGY STAR

®


®


IBM, 640 x 350

IBM, 640 x 480

IBM, 720 x 400

MAC, 640 x 480

MAC, 832 x 624

MAC, 1152 x 870

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 1024

VESA, 1280 x 1024




Display Mode

Horizontal

Frequency

(kHz)

31.469

31.469

31.469

35.000

49.726

Vertical

Frequency

(Hz)

70.086

59.940

70.087

66.667

74.551

Pixel Clock

(MHz)

25.175

25.175

28.322

30.240

57.284

Sync Polarity

(H/V)

+/-

-/-

-/+

-/-

-/-

68.681 75.062 100.00 -/-

37.500 75.000 31.500 -/-

37.861 72.809 31.500 -/-

35.156 56.250 36.000 -/-

37.879 60.317 40.000 +/+

46.875 75.000 49.500 +/+

48.077 72.188 50.000 +/+

48.363 60.004 65.000 -/-

56.476 70.069 75.000 -/-

60.023 75.029 78.750 +/+

67.500 75.000 108.00 +/+

63.981 60.020 108.00 +/+

79.976 75.025 135.00 +/+





Rate. Unit: Hz

General

General

Model Name

LCD Panel

Size

Display area

Pixel Pitch

Type

Synchronization

Horizontal

Vertical

Display Color

16.7M Colors

SyncMaster 940N

19" Diagonal (48cm)

376.32mm (H) x 301.056mm (V)


30 ~ 81 kHz

56 ~ 75 Hz

Resolution

Optimum resolution

Maximum resolution

1280 x 1024@60 Hz

1280 x 1024@75 Hz


RGB Analog




140 MHz

Power Supply

AC 100 to 240 VAC(+/- 10%) ,60/50Hz ± 3Hz

Signal Cable



Less than 38W
















Dot Acceptable





PowerSaver


State

Normal

Operation


EPA/ENERGY

2000

Power off

(Power button)

Power off

(Power Switch)


Power

Consumption

Less than 38W

Less than 1W

(Off-mode)

Less than 1W

(120Vac)

Less than 0W


®


As an ENERGY STAR

®


®


IBM, 640 x 350

IBM, 640 x 480

IBM, 720 x 400

MAC, 640 x 480

MAC, 832 x 624

MAC, 1152 x 870

VESA, 640 x 480

VESA, 640 x 480

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 800 x 600

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1024 x 768

VESA, 1152 x 864

VESA, 1280 x 1024

VESA, 1280 x 1024




Display Mode

Horizontal

Frequency

(kHz)

31.469

31.469

31.469

35.000

49.726

Vertical

Frequency

(Hz)

70.086

59.940

70.087

66.667

74.551

Pixel Clock

(MHz)

25.175

25.175

28.322

30.240

57.284

Sync Polarity

(H/V)

+/-

-/-

-/+

-/-

-/-

68.681 75.062 100.00 -/-

37.500 75.000 31.500 -/-

37.861 72.809 31.500 -/-

35.156 56.250 36.000 -/-

37.879 60.317 40.000 +/+

46.875 75.000 49.500 +/+

48.077 72.188 50.000 +/+

48.363 60.004 65.000 -/-

56.476 70.069 75.000 -/-

60.023 75.029 78.750 +/+

67.500 75.000 108.00 +/+

63.981 60.020 108.00 +/+

79.976 75.025 135.00 +/+





Rate. Unit: Hz

Service

The address and phone number of the company can be changed without previous notice.

CANADA :

Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Canada

Tel. 1-800-SAMSUNG (7267864)

Fax. (905) 542-1199 http://www.samsung.ca

MEXICO :

Tel. 01-800-SAMSUNG (7267864)

Fax. 01.800.849.1743 http://www.samsung.com/mx

U.S.A :

Samsung Electronics America, Inc.

105 Challenger Road

Ridgefield Park, NJ 07660-0511

Tel. 1-800-SAMSUNG (7267864) http://www.samsung.com

ARGENTINE :

Tel. 0800-333-3733 http://www.samsung.com/ar

BOLIVIA :

Fax. 56-2-485-8502 http://www.samsung.com/cl

BRAZIL :

Samsung Electronica da Amazonia Ltda

Rua Prof. Manoelito de ornellas 303, Terreo B.

Chacara Sto. Antonio, 04719-040

Sao Paulo, SP, Brazil

Tel. 0800-124-421 http://www.samsung.com/br

CHILE :

Samsung Electronics Chile LTDA.

Avda. Americo Vespucio Sur 100, Oficina 102

Las Condes, Santiago, Chile

Tel. 800-726-7864(SAMSUNG)

Fax. 56-2-485-8502 http://www.samsung.com/cl

COST RICA :

Tel. 0-800-507-7267 http://www.samsung.com/latin

ECUADOR :


EL SALVADOR :

Tel. 800-6225 http://www.samsung.com/latin

GUATEMALA :


JAMAICA :


PANAMA :

Tel. 800-7267 http://www.samsung.com/latin

PUERTO RICO :


REP. DOMINICA :


TRINIDAD & TOBAGO :


VENEZUELA :


BELGIUM :

Samsung Electronics Benelux BV

Nijverheidsstraat 98 2160 Wommelgem,

Belgium

Tel. 02 201 2418 http://www.samsung.be

CZECH REPUBLIC :

Tel. 844 000 844

DENMARK :

Tel. 38 322 887 http://www.samsung.com/dk

FINLAND :

Tel. 09 693 79 554 http://www.samsung.com/fi

FRANCE :

Samsung Service Consommateurs

66 rue des Vanesses

BP 50116 - Villepinte -95950 ROISSY cedex

France

Tel. 08 25 08 65 65 (0,15 /min)

Fax. 01 48 63 06 38 (0,15 /min) http://www.samsung.fr

GERMANY :

Samsung Electronics GmbH

Samsung House

Am Kronberger Hang 6

65824 Schwalbach/Ts.

Deutschland

Tel. 01805 - 121213 ( 0,12/Min)

Fax. 01805 - 121214 ( 0,12/Min) http://www.samsung.de

HUNGARY :

Tel. 06 40 985 985 http://www.samsung.com/hu

ITALIA :

Samsung Electronics Italia S.p.A

Via C. Donat Cattin, 5

20063, Cernusco Sul Naviglio (MI)

Tel. 199 153 153

Fax. 02 92141801 http://www.samsung.com/it

LUXEMBURG :


Nijverheidsstraat 98 2160 Wommelgem,

Belgium

Tel. 02 261 03 710 http://www.samsung.lu

NETHERLANDS :


P.O. Box 681 2600 AR Delft, The Netherlands

Tel. 0900 20 200 88 ( 0.10/Min) http://www.samsung.nl

NORWAY :

Tel. 231 627 22 http://www.samsung.com/no

POLAND :

Tel. 0 801 801 881

Fax. +48-22-607 4448 http://www.samsung.com/pl

PORTUGAL :

SAMSUNG ELECTRONICA PORTUGUESA, S.A

Rua Cesario Verde, no 5-4, Piso

2795-753 Queijas-Portugal

Tel. 80 8 200 128 http://www.samsung.pt

SLOVAKIA :

Tel. 0850 123 989

SPAIN :

Tel. 902 10 11 30 http://www.samsung.com/es

SWEDEN :

Tel. 08 585 367 87 http://www.samsung.com/se

U.K :

Samsung Electronics U.K. Ltd.

Unit C, Stafford Park 12

Telford, Shropshire

TF3 3BJ

The United Kingdom

Tel. 0870 242 0303

Fax. 01952 297617 http://www.samsung.co.uk

RUSSIA :

Tel. 8-800-200-0400 http://www.samsung.ru

UKRAINE :

30A, Spaska St, Floor 3, Kiev 04070, Ukraine

Tel. 8-800-502-0000

Fax. +380 (44) 537 59 48 http://www.samsung.com/ur

AUSTRALIA :

Samsung Electronics Australia

7 Parkview Drive, Homebush Bay NSW 2127

Tel. 1300 362 603

Fax. (612) 9763 5750 http://www.samsung.com/au

CHINA :

Tel. 800-810-5858, 010- 6475 1880 http://www.samsungservice.com.cn

HONG KONG :

Customer Service Center

11/F, Phase 2, MTL warehouse Building, Berth One,

Kwai Chung, N.T., Hong Kong

Tel. 2862 6001

Fax. 2862 6971 http://www.samsung.com/hk

INDIA :

2nd fl CC-28 , Nehru Enclave Kalkaji New Delhi India

110019

Tel. 3030 8282

1600 1100 11 http://www.samsung.com/in

INDONESIA :

Pusat Pelayanan Purna Jual. PT.SEIN(Samsung Electronics Indonesia)

Jl. Raya Pasar Minggu No.34, Jakarta Selatan

Tel. 0800-112-8888

Fax. (021)797-5080 http://www.samsung.com/id

JAPAN :

Tel. 0120-327-527

Fax. 81-3-3527-5533 http://www.samsung.com/jp

MALAYSIA :

Samsung Malaysia Electronics Sdn. Bhd.

3B-1-1. Level 1, Block 3B, Plaza Sentral, Jalan Stesen Sentral 5, KL Sentral , 50470, Kuala

Lumpur, Malaysia

Tel. 1800-88-9999

Fax. 03-22636759 http://www.samsung.com/my

PHILIPPINES :

Samsung Electronics Phils. Corp.

Ground Floor, Bonaventure Plaza, Ortigas Ave. Greenhills, San Juan

Tel. 1800-10-SAMSUNG (7267864) http://www.samsung.com/ph

SINGAPORE :

Samsung Asia Pte. Ltd.

20 Toh Guan Road Accord Distri Centre #01-01 Singapore 608839

Tel. 1800-SAMSUNG (7267864)

Fax. (65) 6565 7513 http://www.samsung.com/sg

THAILAND :

Thai Samsung Electronics Co.,Ltd

Service Department 1,6 floor Boonmitr Building 138 Silom Rd.,

Suriyawong Bangrak Bangkok 10500

Tel. 1800-29-3232

02-689-3232

Fax. 02-689-3298 http://www.samsung.com/th

TAIWAN :

Tel. 0800-329-999 http://www.samsung.com/tw

VIETNAM :

Tel. 1 800 588 889

Fax. (084) 08-8965566 http://www.samsung.com/vn

SOUTH AFRICA :

Samsung Electronics South Africa (PTY) LTD

Unit 5/6, Hi Tech Villiage, Superior Road, Midrand

South Africa

Tel. 0860 726786 (SAMSUNG)

Fax. 27-11-545-6112 http://www.samsung.com/za

U.A.E :

Tel. 800SAMSUNG (7267864)

Fax. 009714 8837714 http://www.samsung.com/mea

Terms

Dot Pitch

The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot

Pitch'. Unit: mm


The screen must be redrawn several times per second in order to create and display an image for the user. The frequency of this repetition per second is called Vertical Frequency or

Refresh Rate. Unit: Hz

Example : If the same light repeats itself 60 times per second, this is regarded as 60 Hz.


The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal

Frequency. Unit: kHz

Interlace and Non-Interlace Methods

Showing the horizontal lines of the screen from the top to the bottom in order is called the

Non-Interlace method while showing odd lines and then even lines in turn is called the

Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace method is the same as that used in TVs.

Plug & Play

This is a function that provides the best quality screen for the user by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function.

Resolution

The number of horizontal and vertical dots used to compose the screen image is called

'resolution'. This number shows the accuracy of the display. High resolution is good for performing multiple tasks as more image information can be shown on the screen.

Example : If the resolution is 1280 x 1024 , this means the screen is composed of 1280 horizontal dots (horizontal resolution) and 1024 vertical lines (vertical resolution).

For Better Display

1. Adjust computer resolution and screen injection rate (refresh rate) oncomputer as described below to enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD.

{

{

Resolution: 1280 x 1024

Vertical frequency (refresh rate): 60 Hz

2. TFT LCD panel manufactured by using advanced semiconductor technology with precision of

1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen.

This is not from bad quality and you can use it without uneasiness.

{

For example, the number of TFT LCD sub pixels that is contained in this product are

3,932,160.

3. When you clean the monitor and the panel outside, please apply the recommended small amount of cleaner by using soft and dry cloth and polish it. Let LCD area not to be forced but to be scrubbed out softly.

If excessive force is applied, you can have a stain on it.

4. If you are not satisfied with the quality of picture, you can get better quality of picture by executing "auto adjustment function" in display screen that is appeared as window termination button is pressed.

If there's still noise after automatic adjustment, use FINE/COARSE adjustment function.

5. If you view a fixed screen for an extended period of time, residual image or blurriness may appear.

Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time.

Authority

Information in this document is subject to change without notice.

© 2005 Samsung Electronics Co., Ltd. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Samsung Electronics

Co., Ltd. is strictly forbidden.

Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and

Windows NT are registered trademarks of Microsoft Corporation; VESA, DPMS and DDC are

registered trademarks of Video Electronics Standard Association; the ENERGY STAR® name and logo are registered trademarks of the U.S. Environmental Protection Agency (EPA). As an

ENERGY STAR® Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.

Class B

This device is a Class B digital apparatus. For Safety and EMC compliance guide, you may refer to

"Regulatory" Guide.

PRODUCT INFORMATION (Image Retention Free)

LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time.

This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention.

What is Image retention ?

During normal operation of a LCD panel, pixel image retention doesn't occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. All display products, including

LCD,are subject to image retention. This is not a product defect.

Please follow the suggestions below to protect your LCD from image retention

Power Off, Screen Saver, or Power Save Mode

Ex) z

Turn the power off when using a stationary pattern.

- Turn the power off for 4 hours after 24 hours in use z z

- Turn the power off for 2 hours after 12 hours in use

Use a Screen saver if possible

- Screen saver in one color or a moving image is recommended.

Set the Monitor to power off with the PC Display Properties Power Scheme.

Suggestions for specific applications

Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems

We recommend that you follow set up of your display system program as below:

Display Information together with Logo or Moving image cycle.

Ex) Cycle : Display Information for 1 hour followed by a

Display Logo or moving image for 1 minute.

Change the Color Information periodically (Use 2 different colors).

Ex) Rotate the Color Information with 2 colors every 30 minutes.

Avoid using a combination of characters and background color with large difference in luminance.

Avoid using Grey colors, which can cause Image retention easily. z

Avoid: Colors with big difference in luminance (Black & White, Grey)

Ex) z

Recommended settings: Bright colors with little difference in luminance

- Change the characters color and background color every 30 minutes

Ex)

- Every 30 minutes, change the characters with movement.

Ex)

The best way to protect your monitor from Image retention is to set your PC or

System to operate a Screen Saver program when you are not using it.

Image retention may not occur when a LCD panel is operated under normal conditions.

Normal conditions are defined as continuously changing video patterns. When the LCD panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be slight difference in voltage between electrodes that work the liquid crystal (LC) in a pixel. The voltage difference between electrodes increases with time, forcing the liquid crystal to lean. When this occurs, the previous image may be seen when the pattern is changed.

To prevent this, the accumulated voltage difference must be decreased.

Our LCD Monitor satisfies ISO13406-2 Pixel fault Class II

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment) - Europe only

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Samsung 940BE User manual

Install drivers Install programs

Notational

Power

Installation

Clean

Others

contact your dealer

Contact a local dealer

(option)

contact your dealer

Contact a local dealer

Unpacking

Front

Rear

contact your dealer

Contact a local dealer

(option)

Overview

What is MagicTune™?

Basic Functionality

Display Data

Channel Command Interface (DDC/CI)

OSD Mode

Installation

Color Calibration

1. Color Calibration

2. Preview

Uninstall

Troubleshooting

Troubleshooting

Overview

What is MagicRotation?

Basic Function

Installation

Installation Problems

Limitation

System Requirements

Interface

Uninstall

Troubleshooting

Before You Call Technical Support

Check List

Check the following items if there is trouble with the monitor.

Q & A

Self-Test Feature Check

Check List

Check the following items if there is trouble with the monitor.

Q & A

Self-Test Feature Check

Check List

Check the following items if there is trouble with the monitor.

Q & A

Self-Test Feature Check

Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and

Windows NT are registered trademarks of Microsoft Corporation; VESA, DPMS and DDC are

PRODUCT INFORMATION (Image Retention Free)

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment) - Europe only

(Applicable in the European Union and other European countries with separate collection systems)

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Key Features

Related manuals

Samsung

205BW

Samsung

205BW

Samsung

750B