Motorola H620 - Headset - Over-the-ear User`s guide

BEFORE YOU BEGIN
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
Take a moment before you get started to
familiarize yourself with your new
H620 Headset.
motorola
H620
Volume
Buttons
Ear
Speaker
Call
Button
Power
Switch
Indicator Light/
Microphone
(on side)
Quick Start Guide
1
CHARGE
Your Headset's Battery
2
START BLUETOOTH
FEATURE
Your Phone
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
1 Verify slide switch is in the off position (toward
the charging port).
2 Plug the Motorola charger into the end of the
For most Motorola phones (at the main menu):
1 Press M (Menu ) > Settings > Connection >
Bluetooth Link > Setup.
headset.
The indicator light turns red or yellow when the
battery is charging. It may take up to 1 minute
for the indicator light to turn on. When the
headset's battery is fully charged (about 2
hours), the indicator light turns green.
3 Disconnect the charger.
Note: Headset is not functional while charging.
Note: This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately 400 charges.
2 Scroll to Power.
3 Select Change.
4 Scroll to On.
5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
3
PAIR
Your Headset
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Power on headset by sliding the Power switch
towards the microphone to initiate easy
pairing. After a few moments, the indicator
light will be steadily lit in blue to indicate
headset is in pairing mode.
Indicator Light
(steady blue for
pairing)
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.motorola.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
3
PAIR CONTINUED
Your Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
1 On your Motorola phone, press M (Menu ) >
Settings > Connection > Bluetooth Link > Handsfree
> Look for Devices.
Guide Number: 6809518A57-A
The phone lists Bluetooth devices it finds.
Bluetooth QD ID: B014245
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© 2008 Motorola, Inc. All rights reserved.
2 Select Motorola H620.
3 Select OK or Yes to pair your headset with
4
5
your phone.
Enter the passkey: 0000
Select OK.
When your headset successfully pairs and
connects with your phone, the indicator light
changes from steadily lit to flashing blue and
purple.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
4
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
USING YOUR H620
See
Features and
Functions Guide
on the reverse side
for information on
using your H620
1 Place the headset over your ear.
2 On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
Note: If desired, your headset can be restored to
original factory settings. This action will erase all pairing
information stored in your headset. Thus, you will need
to pair your phone and headset again (see step 3).
Note: To restore your headset to original factory
settings, press and hold both Volume buttons and the
Call button at the same time for 10 seconds.
TROUBLESHOOTING
My headset will not enter pairing mode.
Make sure that any devices previously paired
with the headset are turned off. If the indicator
light is not steadily lit in blue, turn off both the
other device and headset, wait 10 seconds,
then turn headset back on. Wait for the indicator
light to become steadily lit in blue, indicating
the headset is now in pairing mode.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1-877-MOTOBLU or visit us at
www.motorola.com/Bluetoothsupport
Features and
Functions Guide
H620
Bluetooth®
Handsfree Headphones
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H620.
EARBUDS AND YOUR
HEADSET
Your H620 headset is supplied with multiple
earbuds. The earbud is fitted onto the end of
your headset’s earpiece speaker, and placed
onto your ear when using your headset.
Your headset’s performance is greatly
dependent upon achieving a good fit on your
ear. Therefore, we recommend trying all the
supplied earbuds with your headset.
TURNING HEADSET
ON AND OFF
To turn your headset on, slide the switch
toward the indicator light. The indicator light
flashes blue three times, then flashes in
blue and purple (if connected with a device)
or is steadily blue (if ready to be paired).
To turn your headset off, slide the switch
toward the charging plug (the orange color
under the switch is displayed). The indicator
light flashes three times then turns off.
Indicator Light
(on side)
Power
Switch
WEARING THE
HEADSET
To wear your headset, flex the earhook and
loop it over your ear as shown.
Be sure to position the ear cushion into your
ear canal for optimal audio performance and
comfort.
CHANGING FOR USE
ON OTHER EAR
You can wear your H620 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:
1 Gently lift and pull the
CHANGING VOLUME
BUTTON ORIENTATION
You can also change the orientation of the
volume buttons on your headset.
1 Turn the headset power off.
2 Press and hold the Volume button you
top of the earhook up
and off speaker stem, as
shown.
want to assign as the "volume up" button
and slide the switch toward the
microphone. The indicator light flashes
blue three times, then steady blue. When
connected, it will flash blue/purple.
2 Flip the headset over.
Volume
Buttons
3 Attach the earhook to
the speaker stem, as
shown.
Indicator
Light
QUICK BATTERY CHECK
European Union Directives
Conformance Statement
Hereby, Motorola declares that
this product is in compliance with:
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
Product
Approval
Number
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
When not on a call, you can check your
headset’s battery charge level by pressing and
holding both Volume buttons.
The indicator light displays charge status for 5
seconds. See below for details on indicator light
and charge status.
Headset Indicator
Talk Time
Red
Yellow
Green
Less than 2 hours
Between 2 to 5 hours
Up to 7 hours
To save battery power, turn OFF the headset
when you don't use it for an extended time by
sliding the switch towards the charging plug.
MAKING CALLS
Function
Receive a call
Mute or unmute a call
Action
Tap the Call button
Tap both Volume
buttons
Reject a call
Press and hold a
Volume button until
the ringer stops
End a call
Tap the Call button
Redial last call
Press and hold the
Call button until you
hear two tones
Make a voice dial call
Tap the Call button
and wait for voice
prompt
Answer second incoming Use phone to answer
call
(follow your phone’s
instructions)
INDICATOR LIGHT
With the Charger Plugged In
Headset Indicator
Headset Status
Red
Charging (battery
level less than 50%
charge)
Yellow
Charging (battery
level more than 50%
charge)
Green
Charging complete
Note: Your H620 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Note: Some features are phone/network dependent.
INDICATOR LIGHT
With No Charger Plugged In
Headset Indicator
Off
Three blue flashes
Steady blue
Rapid blue/purple flashes
Quick blue flash
Slow blue pulse
Slow blue flash
Slow red flash
Slow purple pulse
Steady red
Quick red flash
Headset Status
Power off
Powering on/off
Pairing/connect mode
Connection successful
Incoming/outgoing call
Connected (on a call)
Standby (not on a call)
Idle (not connected
to phone)
Connected call muted
Attempting to connect
Low battery
Note: After 20 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
AUDIO TONES
Audio Tone
Ascending tone
Two descending
tones
Ring tone
Two short tones when
pressing Volume button
High/low tones
repeated every 60 sec.
No audio indications;
deteriorating quality
Two ascending tones
Two rapid ascending
tones
Two rapid descending
tones
Low tone every
10 seconds
Headset Status
Powering on
Powering off
Incoming call
Volume at minimum
or maximum
Low battery
Out of range
Connected to phone
Mute enabled
Mute disabled
Mute reminder