Advantech AIMB-262 Startup Manual

AIMB-262 (Intel® LGA775 Core 2 Duo Mini ITX Motherboard with DDR2/LAN/4COM/PCIe x16)
Startup Manual
Specifications
Packing List
Before you begin installing your card, please make sure that
the following items have been shipped:
1.
AIMB-262 Intel® LGA775 Core 2 Duo Mini ITX Motherboard
2.
SATA HDD cable x 2
3.
SATA Power cable x 2
4.
Serial port cable x 2
5.
I/O port bracket x 1
6.
Startup manual x 1
7.
Driver CD x 1
Optional Cable
1.
Parallel cable with bracket (P/N: 1700008809)
2.
Dual port USB cable (27 cm) with bracket (P/N:
1700002204)
If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
Note: Acrobat Reader is required to view any PDF file.
Acrobat Reader can be downloaded at:
www.adobe.com/Prodindex/acrobat/readstep.html
(Acrobat is a trademark of Adobe).
Standard SBC functions
• CPU: Intel® LGA775 Core 2 Due,Pentium® due-core,
Pentium® 4, Celeron® D
• FSB: 533/ 800 MHz
• BIOS: Award 16 Mbit SPI
• Chipset: Intel 945GC with ICH7
• System Memory: Up to 2 GB; 200-pin SODIMM x 2,
Supports dual channel DDR 533/667 SDRAM
• SATA: Two onboard serial ATA connectors with a data
transmission rate of up to 300 MB/s
• Serial ports: Four serial ports: Three of RS-232; One of
RS-232/422/485
• Parallel port: One parallel port, supports SPP/EPP/ECP
mode (with pin header)
• Keyboard/mouse connector: Supports one standard
PS/2 keyboard, one standard PS/2 mouse
• Watchdog timer: 255 level timer intervals
• USB 2.0: Supports up to six USB 2.0 ports, four external
ports and two onboard pin headers
Graphic Interface
• Controller: Chipset integrated VGA controller
• Display memory: Dynamically shared system memory
up to 224 MB
• CRT: Up to 2048x1536 resolution, 400MHz RAMDAC
Ethernet Interface
• Single 10/100/1000Base-T GbE LAN Realtek RTL8111C
Mechanical and Environmental
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
• Dimensions (L x W): 170 x 170 mm
• Power supply voltage: +5 V, +12 V, +3,3 V, +5 VSB,
-12 V
• Power requirements:
– Intel LGA775 Core 2 Due 1.8Mhz FSB800Mhz,2GB
DDR2
– +5 V @ 4 A, +3.3 V @ 1.02 A, +12 V @ 2.35 A, 5 VSB @
0.26, -12 V@ 0.12 A Measure the maximum current value
which system under maximum load (CPU: Top speed, RAM
& Graphic: Full loading)
• Operating temperature: 0 ~ 60° C (depending on CPU)
• Weight: 0.365 kg (weight of board)
http://www.advantech.com/support
This manual is for the AIMB-262 series Rev. A1
Part No. 2006026210
Print in Taiwan
1st Edition,
August 2008
AIMB-262 Startup Manual Jumpers and Connectors
Jumpers and Connectors
The board has a number of connectors and jumpers that
help to configure the system to suit your application requirements. The tables below list the function of each of the
connectors and jumpers.
Label
Function
JFP2_1
Reset connector
HDD LED connector
ATX soft power switch (PS_ON)
Power/Sleep LED
Keep CMOS data
Users can use JSETCOM1 to select among RS
232/422/485 modes for COM1. The default setting is
RS 232.
CMOS clear
PSON1
AT/ATX mode selector
LPT1
Parallel port
USB56
USB port 5, 6 (on board)
VGA1
VGA connector
COM1/2
Serial port: COM1/2 (rear panel port)
JSETCOM1
Serial port configuration:
RS232/RS422/RS485
KBMS1
PS/2 keyboard and Mouse connector
CPU_FAN1
CPU fan connector
CHA_FAN1
System fan connector
JPSON1: ATX, AT Mode Slector
COM3
Serial port connector
Closed Pins Result
COM4
Serial port connector
1-2
AT Mode
LAN1 / USB port 1,2
2-3*
ATX Mode*
USB34
USB port 3,4
AUDIO1
Line IN, Line Out, Mic IN (Motherboard) connector
EATXPWR1
ATX power connector
TPM_SLOT
TPM2.0 Module connector
SPI_CN1
SPI flash card pin header
SATA1
Serial ATA0 connectors
SATA2
Serial ATA1 connectors
CMOS1: Clear CMOS
Pins
Result
1-2*
Keep CMOS data*
2-3
Clear CMOS data
* Default
AIMB-262 Startup Manual
Clear CMOS
JSETCOM1: COM1 RS232/422/485 Mode Selector
CMOS1
LAN1_USB12
1
1
RS-232 Configuration
(default)
RS-422 Configuration
RS-485 Configuration
* Default
1
1
AT Mode
ATX Mode
1-2 locsed
2-3 closed
Declaration of Conformity
The device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditons:
1.
This device may not cause harmful interference;
2.
This device must accept any interference received,
including interference that may cause undesired operation.
Software Installation
Software Installation
The computer is supplied with a battery-powered Real-time
Clock circuit. There is a danger of explosion if the battery is
incorrectly replaced. Replace only wih same or equivalent
type recommended by the manufaturer. Discard used batteries according to manufaturer’s instructions.
The CD disc contains a driver installer program that will
lead you through the installation os various device drivers
needed to take full advantage of your motherboard.
Board Diagram
Audio1
LAN_USB12
USB34
COM12
VGA1
KBMS1
TPM_SLOT1
JSETCOM2
ATX12 V
LPT1
JFP2_1
CPU_FAN1
SATA2
SATA1
PCIEX16
JFP2_1
CMOS1
PSON1
CHA_FAN1
B
5 and 7
Reset switch
C
1 and 3
Hard driver activity LED
D
2 and 4
Power/Sleep/Waiting LED
E
6 and 8
Power switch
COM3
COM4
USB56
SPI BIOS SPI_CN1
EATXPWR1
DIMM1
AIMB-262 Startup Manual