- Computers & electronics
- Computer components
- System components
- Networking cards
- Planet
- ENW-9801
- Quick guide
PLANET ENW-9803 Quick Installation Guide
Add to my manuals
2 Pages
Planet ENW-9801 is a versatile and high-performance PCI Express 10 Gigabit Ethernet adapter designed to enhance your network connectivity. With its x4 PCI Express interface, it delivers blazing-fast data transfer speeds, making it ideal for demanding applications such as video editing, data transfer, and network virtualization. The ENW-9801 supports a wide range of operating systems, including Windows, Linux, and VMware ESX, ensuring compatibility with your existing setup.
advertisement
PCI Express 10 Gigabit Ethernet
Adapter
Quick Installation Guide Version 2.1
Thank you for purchasing PLANET ENW-9801/ENW-9803
PCI Express 10 Gigabit Ethernet adapter. It supports x4
PCI Express interfaces. The 10 Gigabit Ethernet adapter provides a highly cost-effective solution to upgrading to the 10 Gigabit network with your existing Ethernet infrastructures.
Operation System Support:
Windows Server 2008R2 32 / 64bits
Windows Server 2012 32 / 64bits
Windows 7 32 / 64bits
Windows 8 32 / 64bits
Linux (2.6.x to 3.14.0)
VMware® ESX 5.x
- 1 -
Hardware Installation
Step 1: Please turn off your PC.
hands and wrists.
Step 3: Remove the cover from your PC.
Step 4: Locate an empty PCI Express slot and remove the corresponding back plate. Save the screw for use in Step 6.
- 3 -
Installation on Windows 7
This operation is under Win7 which it is similar to Windows Server 2008.
Note
1. After installing the ENW-9801/ENW-9803 to your PC and booting it up, Windows 7 will detect it and you have to install driver.
3. Please select “Browse my computer for driver
software” for the next step.
- 5 -
4. Insert the bundled CD into the CD-ROM driver.
- 7 -
Package Contents
ENW-9801 x 1 ENW-9803 x 1
Adapter into the chosen slot and press firmly with proper push to ensure it is fully seated in the slot.
2. Please move and right-click the mouse button for
Ethernet Controller item and select “Update Driver
Software”.
5. Please click “Browse” to specify the driver location to install. (Assume “E” is your CD-ROM drive. The driver can be found in E:\DR-ENW-9801v2_ENW-9803
Driver). Click “Next” to continue.
Low Profile Bracket x 1
Quick Installation Guide x 1 User’s Manual CD x 1
Step 6: Secure the 10 Gigabit Ethernet Adapter with the screw you saved in Step 4.
Step 7: Replace the PC cover.
Step 8: Power on your PC and refer to the next section to install driver.
The driver is being installed.
- 2 - 4 - 6 - 8 -
6. Click “Close” button to complete the driver installation.
- 9 -
For more details, please refer to the manual of our bundled CD-ROM.
- 11 -
- 10 - 12 - 13 - 14 -
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project