Bosch Digital Congress Network Technical information

A Tradition of Quality and Innovation
For over 100 years, the Bosch name
DCN Conference Solutions
Data Brochure
has stood for quality and reliability.
Bosch is the global supplier of choice
for innovative technology, backed by
the highest standards for service and
support.
Bosch Security Systems proudly
offers a wide range of security, safety,
communications and sound solutions
that are relied upon every day in
applications around the world, from
government facilities and public venues
to businesses, schools and homes.
Bosch Security Systems
To learn more about our
product offering, please visit
www.boschsecurity.com
or send an e-mail to
emea.securitysystems@bosch.com
© Bosch Security Systems, 2011
Printed in The Netherlands
Modifications reserved
CO-EH-en-05_F01U559648_02
2040_CO_DB_Cover_v4.indd 1-2
Local authority
wireless approval
Although DCN Wireless equipment
operates in a license-free band it is
subject to local certification
regulations. Please contact your
nearest Bosch representative to
check the situation in your country.
29/6/11 15:39:35
Congratulations with your new Data Brochure!
It is with great pride that we present to you the DCN Conference Solutions Data Brochure!
The Data Brochure shows our complete DCN product range, including:
•
DCN Wireless discussion units
•
DCN Next Generation discussion and conference units
•
DCN central equipment
•
DCN software solutions
•
DCN accessories
In this data brochure you can also find the new DCN Central Control Unit which further enhances the functionality of
our DCN Next Generation and DCN Wireless systems.
The new CCU allows a mix of wired and wireless delegate units in one single system, facilitating easy extension of
DCN Next Generation systems to meet changing needs simply by adding DCN Wireless discussion units. Just one
CCU is capable of controlling up to 245 wired and 245 wireless delegate units. Moreover, an Ethernet connection to
the control PC provides far greater flexibility in locating the PC. The number of trunk outputs is also increased from
2 to 3 to provide greater flexibility in connecting wired delegate units, and the cables can be secured to the trunk
outputs with cable locking clamps (DCN-DISCLM) to prevent them from being accidentally pulled out – an important
consideration especially in temporary venues where cables trailing over the floor may be stepped on. In addition, several cost-saving features have been added to the CCU. Output power has been increased, enabling the
CCU to drive more delegate units, reducing the need and expense of additional power supplies in larger systems. And
the CCU is also capable of being configured as a master, eliminating the expense of a dedicated network controller in
large multi-CCU systems (with up 4000 delegate units). Using the new CCU also enhances the DCN Wireless part, including advanced 128-bit AES Rijndael encryption that
provides optimum protection against eavesdropping – important for security-sensitive venues. In addition, the wireless
system now includes a voice activation mode in which microphones are automatically switched on when the delegates
speak (enabling spontaneous, open discussions between delegates). A special VIP list of delegates with enhanced
privileges can also be programmed into the system giving them priority in speaking. And when used together with the
Complete DCN product range
Conference Software Suite, PIN-code recognition is also available, meaning delegates can each be assigned their
own seating position and a PIN code that they must enter when they take their seats to get access to their delegate
unit and register their attendance.
Also in this data brochure you can find our full range of software solutions such as the powerful Conference Software
Suite including the new Simultaneous Interpretation and Message modules, as well as other software solutions such
as the Meeting Recorder software to digitally record meetings on the hard disk of a PC.
Having these products with their new enhanced features will help us to further strengthen our position in the
conference market.
In addition to our product offering, Bosch offers excellent support, to enable you to help your customers find the
perfect solution for their particular situation. A key element in our support is training and we offer a great variety
of training sessions. We can also help you in particular projects with special requirements by offering customized
solutions and/or project support.
For more information on our product range, or for sales support and training, please visit our website (www.
boschsecurity.com) or contact your local Bosch representative. An address list per country is included in this Data
Brochure.
Once again we thank you for your support and hope you will be able to put the DCN Conference Solutions Data
Brochure to good use.
With kind regards,
Bosch Security Systems
Superior security, safety and communication
products: stressing quality, innovation and support.
For over 100 years, the Bosch name has stood for quality and reliability.
Bosch is the global supplier of choice for innovative technology, backed by
the highest standards for service and support.
A tradition of innovation
Quality comes first
We have a long tradition of attaching top priority to
Our company’s founder, Robert Bosch, set the standard.
innovation. To achieve this, we invest more than 10
He wrote “I have constantly tried to make products that
percent of our sales volume in R&D. Around the world,
prove themselves superior in every respect ...” His motto
the Bosch Group has more than 34,000 research and
was “sell the best of the best”. Our strict adherence to
development associates continuously working to
this principle down to this day ensures the reliability of
develop new products, systems and innovative
our products from day one. We use only the very best
manufacturing processes, as well as to improve
materials, purchased according to strict criteria.
existing products.
In-house quality control standards support our core
The results are impressive: Bosch files an average of
processes of development, production, logistics and
over 3800 patents a year, putting it among the world’s
purchasing.
top filers.
Global and local service you can count on
Committed to your success
As part of the Robert Bosch Corporation, we are one
Integral to our success are an in-depth understanding of
of the world’s largest manufacturers of security, safety
our partners’ and customers’ needs and a commitment
and communication products. Our worldwide network
to delivering solutions that add real value and offer
of highly trained support technicians is always near at
your customers a greater return on their investment.
hand, responding quickly and effectively to meet your
We make sure that all Bosch security, safety and
needs as they arise. The Bosch Security Academy also
communication products are efficient and user-friendly
holds local training courses to keep you optimally
— and thus easier for you to sell.
informed about all our products and technologies.
Long-term partnerships
Our goal has always been to build long-term, sustainable
relationships with our partners and customers.
With Bosch behind you, you can look forward to many
years of successful and profitable partnership.
Great variety
You can choose from a great variety of Security, Safety
and Communications Products and Systems: Video
surveillance -- including video over IP and Intelligent
Video Analysis --, Intrusion, Access control and Fire
alarm, Public Address and Voice evacuation,
Management systems, Professional audio, Conference
systems and Care solutions.
Contact_page_EMEA_0410.fm Seite 3 Mittwoch, 7. April 2010 3:59 15
Europe, Middle East and Africa
Corporate Office
Sales Offices
Germany
Belgium
Bosch Sicherheitssysteme GmbH
Werner-von-Siemens-Ring 10
85630 Grasbrunn
Phone: +49 89 6290 0
Fax:+49 89 6290 1020
de.securitysystems@bosch.com
www.bosch-sicherheitsprodukte.de
Bosch Security Systems NV/SA
Torkonjestraat 21F
8510 Kortrijk-Marke
Phone: +32 56 24 5080
Fax: +32 56 22 8078
be.securitysystems@bosch.com
www.boschsecurity.be
Czech Republic
Regional / Export Office
The Netherlands
Bosch Security Systems BV
Direct Export
PO Box 80002
5600 JB Eindhoven, The Netherlands
Phone: +31 40 2577 315
Fax: +31 40 2577 300
export.securitysystems@bosch.com
www.boschsecurity.com/export
Bosch Security Systems s.r.o.
Pod Višnovkou 1661/35
140 00 Praha 4
Phone: +420 261 300 244
Fax: +420 261 300 249
cz.securitysystems@bosch.com
www.boschsecurity.cz
Denmark
Robert Bosch A/S
Security Systems Division
Telegrafvej 1
2750 Ballerup
Phone: +45 4489 8620
Fax: +45 4489 8630
dk.securitysystems@bosch.com
www.boschsecurity.dk
Dubai
Robert Bosch Middle East FZE
DAFZA West Wing 6B
Office 535 Po-Box
54307 Dubai
UAE
Phone: + 9714 2123340
Fax: + 9714 2996137
www.boschsecurity.com
France
Bosch Security Systems France SAS
Atlantic 361
Avenue du Général de Gaulle
92147 Clamart
Phone: +33 825 078 476
Fax : +33 1 4128 8191
fr.securitysystems@bosch.com
www.boschsecurity.fr
Great Britain
Bosch Security Sysetms Ltd.
North Orbital Rd
Denham UB9 5HJ
Phone: +44 1895 87 80 88
Fax: +44 1895 83 90 39
www.boschsecurity.co.uk
Germany
Bosch Sicherheitssysteme STDE
Werner-Heisenberg-Strasse 16
D-34123 Kassel
Phone: /Fax: +49(0)561 8908CCTV: -200/-299; Comm. -300/-399
Einbruch/Brand/Access: -500/-199
de.securitysystems@bosch.com
www.bosch-sicherheitsprodukte.de
Greece
Robert Bosch A.E.
Erchias 37
19 400 Koropi
Phone: +30 210 570 1352
Fax: +30 210 570 1357
BoschST@gr.bosch.com
www.boschsecurity.gr
Hungary
Robert Bosch Kft.
Gyömrői út 120.
Estonia
Robert Bosch OÜ
Security Systems Division
Järvevana Tee 9
11314 Tallinn
Phone: +372 6549 563
Fax: +372 6549 569
Finland
Robert Bosch Oy
Security Systems Division
Ansatie 6 a C
01740 Vantaa
Phone: +358 9 435 991
Fax: +358 9 4359 9333
fi.securitysystems@fi.bosch.com
www.boschsecurity.fi
1103 Budapest
Phone: +36 1 4313 200
Fax: +36 1 4313 222
hu.securitysystems@bosch.com
www.boschsecurity.hu
Portugal
Bosch Security Systems Sistemas de Segurança, SA.
Av. Infante D.Henrique, Lt.2E - 3E
Apartado 8058
1801-805 Lisboa
Phone: +351 218 500 360
Fax: +351 218 500 088
pt.securitysystems@bosch.com
www.boschsecurity.com/pt
Contact_page_EMEA_0410.fm Seite 4 Mittwoch, 7. April 2010 3:59 15
Spain
Sweden
Bosch Security Systems, SAU
C/Hermanos García Noblejas, 19
28037 Madrid
Tel.: +34 914 102 011
Fax: +34 914 102 056
es.securitysystems@bosch.com
www.boschsecurity.es
Bosch Security Systems AB
Vestagatan 2
416 64 Göteborg
Phone: +46 31 722 5300
Fax: +46 31 722 5340
se.securitysystems@bosch.com
www.boschsecurity.se
Italy
The Netherlands
Bosch Security Systems S.P.A.
Via M.A.Colonna, 35
20149 Milano
Phone: +39 02 3696 1
Fax: +39 02 3696 3907
it.securitysystems@bosch.com
www.boschsecurity.it
Bosch Security Systems BV
Postbus 80002
5600 JB Eindhoven
Phone: +31 40 2577 200
Fax: +31 40 2577 202
nl.securitysystems@bosch.com
www.boschsecurity.nl
Norway
Turkey
Robert Bosch AS
Security Systems
Berghagan 1, Postboks 350
1402 Ski
Phone: +47 64 87 89 70
Fax: +47 64 87 89 80
no.securitysystems@bosch.com
www.boschsecurity.no
Bosch Sanayi ve Ticaret AS.
Güvenlik Sistemleri
Ahi Evran Cad.
Ata Center K:1 34398
Maslak - Istanbul
Phone: +90 212 335 0660
Fax : +90 212 286 00 89
www.tr.boschsecurity.com
Poland
Ukraine
Robert Bosch Sp. z o.o.
Jutrzenki 105 str.
02-231 Warszawa
Phone: +48 22 715 4101
Fax: +48 22 715 4105
pl.securitysystems@bosch.com
www.boschsecurity.pl
Robert Bosch Ltd.
Security Systems Division
1, Kraynya Str.
02606 Kiev
Phone: +380 44 490 5990
Fax: +380 44 490 2507
ua.securitysystems@bosch.com
www.boschsecurity.com/ua
Russia
Robert Bosch OOO
Security Systems
13/5, Akad. Korolyova str.
129515 Moscow
Phone: +7 495 937 5361
Fax: +7 495 937 5363
Info.bss@ru.bosch.com
ru.securitysystems@bosch.com
www.boschs.ru
South Africa
Robert Bosch (Pty) Ltd.
Security Systems Division
Private Bag X118
Midrand 1685
Phone: +2711 651 9828
Fax: +27 11 651 7887
IntroductionPage_Online_cmyk.fm Seite 3 Freitag, 23. Januar 2009 10:10 10
Online Product Catalog www.boschsecurity.com/emea
You are looking for information about our products? You
need documentation for the installation, operation or
handling of a certain product? You want to recommend
a product to somebody else?
Our online product catalog offers you all of these
information and answers your questions with a few clicks!
Functionalitites
• Intelligent search function for products
• Download Library for documents and software
• Overview about last month’s updated software and
documents for download
• Printer friendly optimization of all product-related
information
• “Click for big” – zoom view of all product images
• Tell a friend function
• Search function to find Bosch contacts and
locations worldwide
Product information
• Quick access to all product catalogs
–
–
–
–
–
–
–
–
–
–
CCTV
IP Network Video
Observation Systems
Intrusion Alarm Systems
Fire Alarm Systems
Congress and Conference
Personal Security and Paging
Public Address
Voice Evacuation
...
• Detailed product information in different languages
for download
–
–
–
–
–
–
Product images
Advertising material
Brochures, flyers and mailers
Posters and advertisings
Application references
...
• Technical information
–
–
–
–
–
–
Data sheets
Installation, operation and user guides
Application guides
Wiring guides
A/E specifications
....
Visit our website and convince yourself!
www.boschsecurity.com/emea
View of a product with the complete archive of productrelated information
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
Table of Contents | i
DCN Conference Solutions
1
DCN Conference Solutions
DCN Conference Solutions
1
1
Introduction
Introduction
3
3
Applications
Applications
Example 1
Example 2
Example 3
Example 4
Example 5
7
7
8
9
10
11
12
Wireless Discussion Units
Wireless Discussion Units
DCN‑WD‑D Wireless Discussion Unit
DCN‑WDCS‑D Wireless Discussion Unit with
Channel Selector
DCN‑WDD‑D Wireless Dual Discussion Unit
DCN‑WDDCS‑D Wireless Discussion Unit with
Dual Channel Selector
DCN‑WDV‑D Wireless Discussion Unit with Voting
DCN‑WDVCS‑D Wireless Discussion Unit with
Voting and Channel Selector
DCN‑WLIION‑D Battery Pack for Wireless
Discussion Units
DCN‑WCH05 Charger for 5 Battery Packs
DCN‑MICS/L Pluggable Microphone Short/Long
Stem
DCN‑DISBDD Buttons Dual Use (10 sets)
DCN‑DISBCM Buttons Chairman (10 sets)
DCN‑UPTK Upgrade Toolkit
DCN-RCWD10 Roller Case for 10 Wireless
Discussion Units
DCN-FCWD10 Flight Case for 10 Wireless
Discussion Units
DCN‑DISR Rims for Discussion Units
DCN‑WPS Power Supply for Wireless Discussion
Units
13
13
15
17
19
21
23
25
27
28
29
30
30
31
32
33
34
35
Wired Discussion Units
Wired Discussion Units
DCN‑DISS / DCN‑DISL Discussion Unit with fixed
Microphone
DCN‑DISD Basic Discussion Unit
DCN‑DISCS Discussion Unit with Channel
Selector
DCN‑DISDCS Discussion Unit with Dual Channel
Selector
DCN‑DISV Discussion Unit with Voting
DCN‑DISVCS Discussion Unit with Voting and
Channel Selection
DCN‑DISR Rims for Discussion Units
DCN‑MICS/L Pluggable Microphone Short/Long
Stem
DCN‑DISBCM Buttons Chairman (10 sets)
DCN‑DISBDD Buttons Dual Use (10 sets)
DCN‑DISCLM Cable Clamp (25 pcs)
DCN‑FCDIS Flight Case for 10 Discussion Units
52
53
53
54
54
Concentus Units
Concentus Units
DCN‑CON Concentus Basic
DCN‑CONCS Concentus Channel Selector
55
55
56
57
www.boschsecurity.com
37
37
39
41
43
45
47
49
51
DCN‑CONFF Concentus Full Function
DCN‑CONCM Concentus Chairman
DCN‑MICS/L Pluggable Microphone Short/Long
Stem
LBB 3555/00 DCN Intercom Handset
DCN‑FCCON Flight Case for 10 Concentus Units
59
61
63
64
65
Flush Mounted Units
Flush Mounted Units
DCN‑DDI Dual Delegate Interface
DCN‑FHH Hand Held Microphone
DCN-FMIC Flush Microphone Connection Panel
DCN‑FMICB Flush Microphone Control Panel
DCN‑MICS/L Pluggable Microphone Short/Long
Stem
DCN‑FPRIOB Flush Priority Panel
DCN‑FLSP Flush Loudspeaker Panel
DCN‑FV Flush Voting Panel
DCN‑FVCRD Flush Voting ID Card Panel
DCN‑FVU Flush Voting Unit
DCN‑FCS Flush Channel Selector
LBB 3555/00 DCN Intercom Handset
DCN‑FBP and DCN‑FBPS Blank Panel
DCN‑FEC Flush End Cap (50 pcs)
DCN‑FCOUP Flush Coupling (50 pcs)
DCN‑FPT Flush Positioning Tools (2 sets)
DCN‑TTH Table Top Housing (10 pcs)
DCN‑FET Flush Extraction Tools
67
67
69
71
72
73
Interpretation Units
Interpretation and Language Distribution
DCN‑IDESK Interpreter Desk
DCN‑MICS/L Pluggable Microphone Short/Long
Stem
DCN‑FCIDSK Flight Case for 2 Interpreter Desks
87
87
88
90
91
Headphones
Headphones
HDP‑LWN Lightweight Neckband Headphone
LBB 3443 Lightweight Headphones
LBB 3442/00 Single Earphone
LBB 3441/10 Under the Chin Headphones
HDP‑ILN Induction Loop Neckband
LBB 3015/04 High Quality Dynamic Headphones
LBB 9095/30 Interpreter Headphones
93
93
94
95
96
97
98
99
100
Central Equipment
Central Equipment
DCN‑CCU2 Central Control Unit
DCN‑CCUB2 Central Control Unit Basic
DCN‑DISCLM Cable Clamp (25 pcs)
DCN‑WAP Wireless Access Point
LBC 1259/01 Universal Floorstand
DCN‑EPS Extension Power Supply
LBB 4402/00 Audio Expander
PRS‑4DEX4 Audio Expander Digital
LBB 4404/00 CobraNet Interface
DCN‑FCCCU Flight Case for 2 Central Control
Units
DCN‑WFCCCU Flight Case for CCU and WAP
PRS 1AIP1 IP Audio Interface
101
101
102
104
105
106
108
110
111
113
115
Conference Software Suite
Conference Software Suite
DCN‑SW Conference Software Main Module
DCN‑SWMM Conference Software Microphone
Management
74
75
76
77
78
79
80
81
82
83
83
84
84
85
116
117
118
121
121
122
124
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
ii | Table of Contents
DCN‑SWPV Conference Software Parliamentary
Voting
DCN‑SWDB Conference Software Delegate
Database
DCN‑SWSI Conference Software Simultaneous
Interpretation
DCN‑SWMD Conference Software
Message Distribution
DCN‑SWID Conference Software ID Card
Encoding
DCN‑IDENC ID Card Encoder (USB)
DCN‑IDCRD ID Card (100 pcs)
DCN‑SWAT Conference Software Attendance &
Access
DCN‑SWSMD Conference Software Streaming
Meeting Data
DCN‑SWAPI Conference Software API
DCN‑SWMPC Conference Software Multi PC
126
128
129
130
131
132
133
134
135
136
137
Smart Control Software
Smart Control Software
DCN‑SWSMV Synoptic Microphone and Voting
Software
139
139
Meeting Recorder Software
Meeting Recorder Software
DCN‑MR Meeting Recorder
DCN‑MRT Transcription Module
DCN‑MRFP Transcription Foot Pedal
143
143
144
146
148
Various software applications
Various software applications
DCN‑SWIND Individual Channels
LBB 4187/00 Open Interface
149
149
150
151
Cameras and Accessories
Cameras and Accessories
DCN‑SWSACC Standalone Automatic Camera
Control
LTC 8200 Allegiant Video Switcher
LTC 8555/00 Allegiant Keyboard
LTC 5136 Autodome Controller
AutoDome 300 Series PTZ Camera System
LTC 0455 Series Color Camera
UML Series 17-, 19-, 20-inch High-performance
LCD Flat Panel Monitors
153
153
Information Displays
Information Displays
DCN‑DDB Data Distribution Board
163
163
164
Installation Equipment
Installation Equipment
LBB 4114/00 DCN Trunk Splitter
LBB 4115/00 DCN Tap-Off Unit
LBB 4116 Series DCN Extension Cables
LBB 4116/00 DCN Installation Cable 100m
LBB 4117/00 DCN Cable Locking Clamp (25 pcs)
LBB 4118/00 DCN Termination Plug
LBB 4119/00 DCN Connectors (25 pairs)
LBB 4410/00 Optical Network Splitter
LBB 4414/10 Fiber Interface Without Address
LBB 4416 Series Optical Network Cables
LBB 4417/00 Set Network Connectors (20 pcs)
LBB 4418/00 Cable Connector Tool Kit
LBB 4419/00 Cable Couplers (10 pcs)
165
165
166
167
168
169
169
170
170
171
172
173
174
174
175
Bosch Security Systems
140
Classic PC Software
Classic PC Software
DCN‑CCU Central Control Unit
DCN‑NCO Multi CCU Network Controller
LBB 4190/00 Startup
LBB 4185/00 System Installation
LBB 4170/00 Microphone Management
LBB 4171/00 Synoptic Microphone Control
LBB 4172/00 Simultaneous Interpretation
LBB 4173/00 Intercom
LBB 4175/00 Parliamentary Voting
LBB 4176/00 Multi Voting
LBB 4178/00 Attendance Registration
LBB 4180/00 Delegate Database
DCN‑IDENC ID Card Encoder (USB)
DCN‑IDCRD ID Card (100 pcs)
LBB 4181/00 ID Card Encoder
LBB 4182/00 Message Distribution
LBB 4183/00 Text/Status Display
LBB 4184/00 Video Display
LBB 4188/00 Automatic Camera Control
LBB 4189/00 Multi PC
177
177
178
180
182
183
185
187
189
190
191
193
195
196
198
199
199
200
201
202
203
204
Technical Data
Technical Data
205
205
154
155
156
157
158
160
161
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | DCN Conference Solutions | 1
DCN Conference Solutions
1
Features
▶ Optimized structure and efficiency in meetings
▶ Up to 31 interpretation channels, plus floor
▶ Full range of voting facilities
▶ Flexible interfacing with 3rd party devices
▶ Easy system expansion with wired and wireless units
The Bosch Digital Congress Network (DCN) brings the
benefits of innovative digital technology to discussion and
conference systems.
It is the first entirely digital system of its kind, and offers
versatility, high audio quality and data transmission while
providing complete control over conference proceedings.
Whether you build a wired set-up (using DCN Next
Generation units), a wireless set-up (using DCN Wireless
units) or create a strong combination by mixing both, the
DCN system puts you in total control of your conference
environment.
The documentation within this chapter gives background
information on the complete product line.
www.boschsecurity.com
Bosch Security Systems
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Introduction | 3
Introduction
highly simplified, with modern, user-friendly control
software and flexible management facilities for all types of
conferences. Whether you install a wired set-up (using
DCN Next Generation units), a wireless set‑up (using DCN
Wireless units) or create a strong combination by mixing
both, the DCN system puts you in total control of your
conference environment. It is suitable for events from
small, informal gatherings up to international multi-lingual
conferences.
Digital performance with user-friendly software control
The system meets every requirement of modern
conference management. Facilities include basic
microphone management, delegate identification and
registration, electronic voting, information distribution
and display, and extensive simultaneous interpretation.
The DCN is above all user-friendly. With the appropriate
software modules, a single operator can control and
monitor even the largest of conferences.
World’s first fully digital conference system, enhanced
for even higher performance
The Bosch Digital Congress Network brings the benefits of
innovative digital technology to discussion and conference
systems. It is the first entirely digital system of its kind,
and offers versatility, high audio quality and data
transmission while providing complete control over
conference proceedings. Operation and installation are
Modular system approach
By simply daisy‑chaining DCN Next Generation wired units
or adding DCN Wireless units, any configuration can be
put together. This modular structure means a system can
be tailored for conferences at all levels. Systems are easily
extended by adding more equipment like audio expanders
or software modules.
System network
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
4 | DCN Conference Solutions | Introduction
1
1. Central Control Unit
9
Interpreter desks
2. Digital Audio Expander
(audio-logging)
10
Integrus radiator
3. Integrus Transmitter
11
Integrus receivers
4.
CobraNet™ unit
12
Wireless Access Point
5. Concentus units
13
Camera
6. Flush‑mount units
14
DCN control software
7. Wired discussion units
15
Touchscreen
8. Wireless discussion units
16
LCD video screen
Range of equipment
The Bosch DCN range includes wired and wireless
conference units, central control units, wireless access
point (WAP), simultaneous interpretation and language
distribution equipment, conference control software,
information provision and installation equipment. This is
complemented by external equipment such as PCs,
monitors, booster amplifiers, loudspeakers and printers,
all of which are easily integrated into the DCN system.
Advanced audio coupling
Via the optical network, a variety of audio couplings are
possible, including coupling small systems with a few
languages into a large system with as many as 31
languages. It is also possible to extract and insert both
digital (AES/EBU or SPDIF) and analog audio. Other
advanced audio coupling techniques include CobraNet™.
CobraNet™ is a combination of software, hardware and
network protocol that allows distribution of many realtime, high-quality digital audio channels over an Ethernet
network using CAT5 cables. CobraNet™ makes it easy to
distribute audio in buildings and connect the DCN system
to other audio CobraNet™-compatible devices such as
audio recorders and audio mixers.
Contribution equipment
Contribution equipment covers the units that participants
use to take part in a conference. Depending on the type of
contribution unit, participants can listen, speak, register a
request‑to‑speak, receive screen messages, hold private
conversations with other participants via an intercom,
take part in electronic voting and receive simultaneous
interpretation of the floor language.
Chairman units have a microphone priority system that
temporarily mutes all active delegate microphones.
Excellent speech intelligibility
The advanced digital technology delivers excellent audio
performance with no loss in signal quality or level. Each
unit receives an audio signal of consistently high quality,
which makes a significant contribution to speech
intelligibility. The DCN system virtually eliminates
problems associated with conventional systems, such as
background noise, interference, distortion and cross talk.
Bosch Security Systems
The DCN Wireless units are also protected against
interference from mobile equipment using Bluetooth or
microwave signals. What’s more, the system is mobile
phone-proof, so participants can leave their mobile
phones switched on during meetings without disrupting
the discussion system signal.
Reduced installation costs
Fast, cost-saving installation is an important benefit of the
DCN system. DCN Next Generation units use thin, flexible,
twin coaxial cables to carry all the system’s digital signals,
eliminating the need for costly and vulnerable multi-core
cables. The cables are easily run through existing ducting
and cable conduits. They can simultaneously carry up to
32 high-quality contribution channels and 32 high-quality
distribution channels.
Wireless convenience in all aspects
When using DCN Wireless discussion units, conferences
and seminars can be set up with a great degree of
freedom thanks to the system’s flexible design. The WAP
can be mounted on a wall, ceiling or tripod, and is easily
positioned for best technical or aesthetic effect. Individual
wireless discussion units can be added or rearranged by
simply picking them up and moving them. With minimal
time required for set-up or break-down, multiple events
can be planned in sequence with virtually no delays. The
DCN Wireless gives great support to conferences and
seminars anywhere people meet.
Simple battery maintenance is essential for a wireless
application. Discussion units use lithium-ion batteries with
little or no charge degradation during their long life. A
fully charged battery lasts approximately 20 hours, which
is far longer than most meetings or conferences. Batteries
have a short recharge time – as little as a few hours – and
as only the battery packs need to be removed; the
discussion units can remain in place. Furthermore, each
unit has a patent-pending “sleep mode” to conserve
power consumption during longer breaks. And, with the
remote overview available via the Conference Software,
an administrator can view the battery and signal statuses
of all active discussion units.
Secure and stable wireless communication
The system makes use of secure wireless communication
with 128-bit AES (Advanced Encryption Standard) Rijndael
encryption. The intelligent system even features automatic
subscription blocking.
Further subscriptions are prevented even if the
administrator forgets to close the subscription process.
The WAP is linked to the CCU using Bosch's proprietary
optical network, which provides digital optical
communication and power supply over a single cable.
Secure wireless communication between the WAP and the
discussion units is in the 2.4 GHz band, which is licensefree worldwide.
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Introduction | 5
Simultaneous interpretation and language distribution
equipment
1
The DCN system has comprehensive simultaneous
interpretation and language distribution facilities that
enable it to meet the demands of multilingual
conferences.
All interpretation facilities are integrated into the basic
system concept, with interpretations using the same
digital trunk line cabling as all other system functions. It is
relatively simple to integrate language facilities into
existing DCN Next Generation or DCN Wireless systems.
The simultaneous interpretation system enables both
direct and auto relay interpretation modes to cater for
less familiar languages. Each interpreter desk has an
output for the normal (primary) language and another for
alternative languages.
Up to 31 different languages
The DCN Next Generation interpreter desk accommodates
up to 31* language channels, plus the original floor
language, all with an audio-bandwidth of 20 kHz. A
maximum of six desks can be installed per interpreter
booth.
When used in a stand-alone system, its built-in
microprocessor is manually programmed to allocate
language channels, channel routing and interlocks. In
operator-controlled systems, the desk can be configured,
controlled and monitored using the dedicated software
module for simultaneous interpretation.
* The first 10 channels can be distributed through the DCN
Wireless discussion units, the other channels are available
throughout the rest of the system.
Wired or wireless language distribution
The DCN system offers a choice for language distribution.
When used in combination with DCN Next Generation
delegate units, language distribution can be via the
system cabling, and languages are accessed and selected
using channel selector units or delegate units with built‑in
channel selection facilities.
When using the DCN Wireless discussion units, language
distribution is via the secure wireless signal and
participants can receive the language channels with the
built-in channel selectors in the units.
In addition, the Integrus digital infrared (IR) language
distribution system can be used to distribute languages
throughout the conference venue using IR transmitters
and radiators. Access is by means of personal infrared
receivers with headphones.
www.boschsecurity.com
Integrus System for wireless language distribution
Integrus is connected via the optical network to the DCN
system to distribute all 32 languages with IR-digital
technology that conforms to IEC 60603 part 7. IR digital
technology ensures maximum sound quality with a signalto-noise ratio of 80 dB. Integrus also incorporates a
special operation mode to couple rooms. This means that
multiple systems located in separate rooms can provide
exactly the same language. For more information about
Integrus, see the Integrus Data Brochure.
Central control equipment
The Central Control Unit (CCU) forms the heart of the
conference management system. The CCU can operate
stand¬alone to provide automatic conference control, or
be controlled by an operator via a PC when more
extensive management is required.
The CCUs can control up to 245 DCN Next Generation
wired and 245 DCN Wireless contribution units* (such as
delegate and chairman units, interpreter desks). If more
capacity is required, CCUs can be stacked together to
support up to 4000 microphone positions*. CCUs can also
provide power for a number of contribution units. The
maximum number depends on the type of contribution
units used in the application.
* Requires the DCN-CCU2
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
6 | DCN Conference Solutions | Introduction
1
Central Control Unit
Fully automatic conference proceedings
In standalone mode, the CCU does not require operator
control and automatically manages conference
proceedings. It offers basic microphone management,
simultaneous interpretation and voting facilities, as well
as 32 high-quality audio channels. This effectively allows
unsupervised control of even large, international
conferences.
Operator control via a PC
For extended functionality, the CCU also offers operator
control via a PC using an Ethernet cable. A comprehensive
range of software modules is available for PC-controlled
DCN systems. These modules run under Microsoft
Windows, and integrate conference preparation,
management and control into this operating system. Any
combination of modules can be installed to satisfy
specific system requirements.
Information and hall displays
A major strength of the DCN system is its ability to
distribute information to conference participants quickly
and efficiently for all requirements. A wide range of
displays is supported, from personal LCD screens to video
equipment for venue broadcasting.
In wired applications, the Concentus chairman unit and
the Concentus Full Function delegate units can be used.
These are equipped with a graphic LCD screen which
displays delegate information, voting time, public and
personal messages, microphone status and multilingual
user instructions. These screens can display languages
such as Chinese that use non-European characters.
Interpreter desks are equipped with backlit LCD screens.
Automatic camera control
The DCN system can automatically show an image of the
current speaker on flat screens or large projection screens
in the main hall, lobby, interpreters’ booths, breakout
rooms or anywhere else required. Delegate information
appears along with the image. For a general overview of
all delegates, the system can switch to fixed-angle
cameras. Camera control and configuration is automatic,
so the system can be run without an operator. Bosch
AutoDome cameras are ideal for this application and are
especially useful when video conferencing between sites.
Camera control ensures that participants always have
appropriate details on the current speaker.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Applications | 7
Applications
1
Application examples
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
8 | DCN Conference Solutions | Applications
1
Example 1
Small meetings
Supporting video - without an operator
Shopping list
1. Discussion units with voting feature
2. Chairman unit with voting feature
3. Central control unit
4. Modular AutoDome
5. Bosch Plena Public Address System with XLA 3200
Line Array Loudspeakers
An image of the current speaker, including the speaker’s
name, can be displayed on all monitors including those
used for video conferencing.
Guiding and controlling the discussion
Delegates request the floor by pressing the microphone
button. Multiple requests are automatically placed on a
waiting list by the CCU. The chair can register requests to
speak and can override delegates with a priority key,
which sounds an “attention” tone and mutes all delegate
microphones. The system also includes a ‘voice mode’
which does not require the delegates to use the
microphone on/off switch. This facilitates faster
discussions.
Collecting and tallying votes
The system supports five kinds of voting: parliamentary,
for/against, multiple choice, opinion polling and audience
response.
The Concentus chairman unit can be used to start and
stop voting with the voting script and results are
displayed on the unit’s graphic LCD panel. Voting can also
be controlled remotely, by an operator using a PC or
touch screen, and results can be exported, in real‑time
and in various formats, to numeric hall displays or large
screens.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Applications | 9
Example 2
Advanced International conferences
Shopping list
1. Flush‑mount units with card-reader module
2. Flush‑mount chairman unit with card-reader module
3. Interpreter desks
4. Integrus receivers
5. Integrus radiator
6. PC and touchscreen with DCN Control Software
Note
The interpreter booths shown in the drawing
are for illustration purposes only and do not
represent a real situation. Requirements with
respect to sound insulation and other general
characteristics of interpreter booths are
specified by ISO (the International
Organization for Standardization) in:
ISO 2603 - Fixed booths for simultaneous
interpretation. ISO 4043 - Mobile booths for
simultaneous interpretation.
1
Delegate positions can be equipped with ID card readers
that accept PIN‑codes. For high‑security situations, the
DCN Concentus and DCN flush‑mount units can be
extended with a fingerprint reader for biometric
verification.
Simultaneous interpretation
When language interpretation is needed, soundproof
booths can be equipped with DCN interpreter units. Each
interpreted language is automatically distributed to
headphones connected to delegate units or flush‑mount
channel selectors. To give delegates greater freedom of
movement, interpreted languages can also be directed to
wireless Integrus pocket receivers.
Adding software controls
Advanced software functions give operators an added
level of control. There are features for configuring
authorizations, making agendas, listing delegates,
programming ID cards, synoptic layouts and electronic
voting.
Registering attendance
Attendance registration enables delegates to identify
themselves at the entrance or at their conference unit.
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
10 | DCN Conference Solutions | Applications
1
Example 3
Keeping pace with your changing needs
Staying flexible with wired and wireless options
Shopping list
1. Concentus delegate units
2. Concentus chairman unit
3. Wired discussion units
4. Wireless discussion units
5. Wireless access point
6. Battery pack chargers
7. DCN interpreter desk
8. Integrus receivers
9. Integrus radiator
10. Central control unit
11. Digital audio expander
12. CobraNet™ unit
13. Integrus transmitter
14. DCN control software
A DCN system can be built using wired or wireless units,
or any combination of the two. When combined, the
system has the unique benefits of both unit types. Wired
systems can be extended with wireless discussion units
for larger conferences or difficult to reach positions. For
even larger setups, more CCUs can be added and, no
matter what the configuration, advanced software
functions make it easy to operate.
Note
The interpreter booths shown in the drawing
are for illustration purposes only and do not
represent a real situation. Requirements with
respect to sound insulation and other general
characteristics of interpreter booths are
specified by ISO (the International
Organization for Standardization) in:
ISO 2603 - Fixed booths for simultaneous
interpretation. ISO 4043 - Mobile booths for
simultaneous interpretation.
Bosch Security Systems
Expanding the possibilities
The DCN conference elements can be joined together in
any number of ways. The interpretation system can be
combined with an Integrus system, for wireless
distribution of up to 32 language channels. Plus, the
entire setup can be interfaced to third‑party systems,
including broadcast, building management, and public
address facilities. As a customized solution, individual
touch screens can be added for voting functions and for
instant access to online data.
Streaming content to remote participants
Using the Internet, the system can provide off‑site
delegates with full access to audio, video and data, so
they can follow speeches, view presentation slides, see
the live meeting video, get voting results, retrieve
messages, and more.
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Applications | 11
Example 4
1
Location friendly
Shopping list
1. Wireless discussion unit
2. Wireless dual discussion unit
3. Central control unit
4. Wireless access point
5. Battery pack charger
6. DCN control software
Location Friendly
With superb sound and speech quality of up to 20 kHz,
the DCN Wireless Discussion System allows participants
to speak and listen with ease. Bosch has gone to great
lengths to design a system that is easy to use and
adaptable to changing situations and requirements. A
basic discussion unit allows delegates to talk and listen,
while a dual discussion unit is a cost‑effective solution
which serves two delegates simultaneously. The system
includes also a ‘voice mode’ which doesn’t require the
delegates to use the microphone on/off button and allow
faster discussions. Chairman’s functionality can easily be
added to a unit to allow a chairman to overrule delegates
with the touch of a button. Featuring an award‑winning
Wireless Access Point (WAP), this discussion system can
be installed, rearranged and operated with virtually no
impact on the integrity of the location.
Whether the venue is large or small, multiuse or historical,
the DCN Wireless Discussion System by Bosch offers
organizations unparalleled functionality and flexibility.
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
12 | DCN Conference Solutions | Applications
1
Example 5
Full featured wireless system
Shopping list
1. Wireless discussion unit with voting
2. Central control unit
3. Wireless access point
4. Battery pack charger
5. Modular AutoDome
6. DCN control software
7. DCN interpreter desk
Note
The interpreter booths shown in the drawing
are for illustration purposes only and do not
represent a real situation. Requirements with
respect to sound insulation and other general
characteristics of interpreter booths are
specified by ISO (the International
Organization for Standardization) in:
ISO 2603 - Fixed booths for simultaneous
interpretation. ISO 4043 - Mobile booths for
simultaneous interpretation.
Voting
For interactive situations where polling and voting are
important, discussion units with voting functionality can
be used in the DCN Wireless Discussion System. The
operator can start, stop and suspend voting via the DCN
control software on a personal computer or via a touch
screen. Voting results can be synoptically displayed on
various kinds of screens and logged when necessary. The
DCN control software also allows for anonymous voting,
displaying the total result. The Concentus chairman unit
Bosch Security Systems
can be used to start, stop and suspend voting, with the
voting script and results displayed on the unit’s graphic
LCD panel.
Interpretation
With a 10‑language capacity, the system is designed so
that delegates can follow the meeting in their preferred
language. This is why certain DCN Wireless Discussion
units come equipped with a channel selector and
headphone jack. This makes it ideal for international
‘dinner meetings’ where cables can be highly
inconvenient.
Automatic Camera Control
The system can automatically show an image of the
current speaker on monitors or projection screens in the
main hall, interpreters booths, or anywhere else required.
Camera control is automatic, so no full‑time operator is
required. This makes the system also highly suitable for
Video Conferencing, which is good news for the
environment. For this application Bosch AutoDome
cameras are ideal.
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wireless Discussion Units | 13
The DCN Wireless Discussion System has been
intelligently designed to be as user friendly as possible,
whether the user is a system operator, chairman or
participant. Discussion units are comfortable and intuitive
to use. The system is built with high-end finishing
materials, giving it a timeless and discrete look. The
design includes changeable rims (charcoal black, matte or
glossy metal and silver), meaning that you can modify
each discussion unit to fit in with its environment.
•
•
DCN-WDV-D
•
•
DCN-WDCS-D
•
•
DCN-WDDCS-D
•
•
DCN-WDVCS-D
•
•
Voting
DCN-WDD-D
1
Channel
Selector
•
Pluggable
microphone
•
Auxiliary
DCN-WD-D
Dual use
Chairman
The DCN Wireless system is designed to be the most
flexible discussion system available, the DCN Wireless
Discussion System by Bosch offers the perfect solution
for challenging locations such as multi-user venues and
historical buildings. The wireless system lets owners of
multi-use venues provide better, more effective service to
their customers. With minimal time required for set-up or
breakdown, multiple events can take place in sequence,
enabling better and more effective use of space.
Wireless Discussion Units overview
Single
delegate
Wireless Discussion Units
•
•
•
•
•
•
•
•
•
1
•
•
2
•
•
1
•
All Wireless Discussion Units are delivered with a single
delegate button. For the chairman, dual and auxiliary
mode two different sets of buttons are available: Dual use
buttons and chairman buttons. The chairman buttons can
also be used for auxiliary control. The buttons are easily
removed using a special tool (supplied with the buttons).
Sets of buttons must be ordered separately.
The Wireless Discussion Units communicate with the
Wireless Access Point (WAP) by means of secure wireless
communication with 128‑bits AES Rijndael encryption. It
uses one of the three non‑overlapping‑carriers in the 2.4
GHz band, which is license‑free worldwide. The WAP is
linked to the CCU using Bosch's proprietary optical
network, which provides digital optical communication
and power supply over a single cable.
For extra confidentiality an automatic blocking function
prevents subscription of unauthorized Wireless Discussion
Units to the system.
The Wireless Discussion Units ares available with dark
colored bases. All units have a pluggable microphone
(supplied separately) available in short and long stem
length versions. The microphones have flexible stems for
ease of use. Special rugged suitcases that accommodate
complete systems are available for storage and transport.
The Wireless Discussion Units range from units with
standard discussion functionality, to versions with a
channel selector and voting that enable contributing
delegates to take part in the decision making process, a
vital aspect of modern conferencing. The Discussion units
have 4 different operation modes. All Discussion units can
be used either for normal delegates or as a chairman unit.
The third mode is dual use, in which two delegates each
have their own microphone button for individual
identification. The fourth mode is auxiliary control. In this
mode, the delegate has an extra button next to the
microphone button, which can be used as an usher call,
for example.
www.boschsecurity.com
Replacing the buton
Button types:
1. Single use button
2. Dual use button
3. Chairman or Auxiliary control button
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
14 | DCN Conference Solutions | Wireless Discussion Units
1
Discussion units with short microphones
High capacity rechargeable lithium-ion battery pack for
Wireless Discussion Unit
All Wireless Discussion Units are delivered without the
pluggable microphones. These microphones have to be
ordered separately. Two different lengths of pluggable
microphones are available. Rechargeable high capacity
battery packs and rims need to be ordered separately as
well. Several rims are available in different finishes. The
rims can be mounted without any tools.
Rims to be mounted on the discussion unit
The rechargeable battery is the power source of the
wireless discussion units. The battery is a high capacity
Lithium-ion type, capable of providing up to 20 hours
typical use from a full charge, while fully charging the
battery pack from empty takes just 3 hours. The
microprocessor controlled lithium-ion cells avoid the
charge degradation issues associated with other
rechargeable battery types.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wireless Discussion Units | 15
DCN‑WD‑D Wireless
Discussion Unit
Security
Wireless communication means extra security
considerations. The DCN Wireless system and discussion
units therefore feature 128‑bits AES encryption to prevent
eavesdropping and unauthorized access. Encryption
ensures the information within the system remains
confidential.
Microphones
A socket is provided to connect the pluggable
microphones which are available in short and long stem
versions (DCN‑MICS and DCN‑MICL, to be ordered
separately).
Headphones and loudspeakers
The unit also accommodates two headphone connections,
so the speaker can be heard clearly even with excessive
background noise. To prevent acoustic feedback the builtin loudspeaker is muted when the microphone is on. If
enabled, the headphones volume is also automatically
reduced to prevent acoustic feedback when the
microphone is on.
Rims and buttons
Features
▶ Used as delegate or chairman unit
▶ Separate battery pack, easy to change and charge
▶ Advanced power saving techniques
▶ Low susceptibility to electromagnetic interference
▶ Auto microphone-off
▶ Auto-search for own network
▶ Auto switch-off when out of range
To the participant the most important part of a
conference system is the discussion unit. Bosch has built
on the elegant design of the DCN Next Generation
discussion units to create a new series of wireless
discussion units with unrivalled looks and features.
The DCN‑WD‑D Wireless Discussion Unit enables
participants to speak, register a request-to-speak, and
listen to the speaker.
Functions
Speech intelligibility
Maximum speech intelligibility is guaranteed at all times.
Operating in the 2.4 GHz (license free) band, the wireless
discussion units produce crystal-clear sound due to a very
high signal-to-noise ratio and antenna diversity. This
means the signal is transmitted along different
propagation paths, ensuring optimal receipt. The system
is also protected against interference from mobile phones
and other equipment that makes use of Bluetooth or
microwave signals.
www.boschsecurity.com
Different rims are available to allow matching with the
interior (DCN‑DISR, to be ordered separately).
The unit can be used as:
•
•
•
•
a single delegate unit
a dual delegate unit
a chairman unit (DCN‑DISBCM chairman buttons, to
be ordered separately)
a single delegate unit with auxiliary button (to be used
as an usher call, for example).
Battery maintenance
Simple battery maintenance is essential in a wireless
system. A unique feature of Bosch's wireless discussion
units are the separate rechargeable battery packs
(DCN‑WLIION, to be ordered separately). These Lithiumion battery packs can be removed and replaced in a
matter of seconds, providing maximum flexibility in
recharge scheduling.
Controls and Indicators
On front
•
Microphone button with a red or green illuminated
ring. Red indicates microphone is active, green
indicates request-to-speak accepted
• Headphone volume control buttons
On rear
•
•
Out-of-range indicator
Battery low indicator
Under base
•
•
Recessed ‘De-init’ switch
Mode select switches (delegate, chairman, etc.)
Interconnections
• Socket for pluggable microphone
• Two 3.5 mm (0.14 in) headphone sockets stereo jack
type
• DC power input from DCN‑WPS (accessible when
battery pack is removed)
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
16 | DCN Conference Solutions | Wireless Discussion Units
1
Ordering Information
Certifications and Approvals
Region
Certification
Europe
CE
DCN-FCWD10 Flight Case for 10 Wireless
Discussion Units
light grey, can hold 10 wireless discussion
units and 2 charging units
DCN-FCWD10
Technical Specifications
Electrical
Frequency response
30 Hz - 20 kHz
Headphone load impedance
>32 ohm <1k ohm
Output power
2 x 15 mW/32 ohm
Mechanical
Mounting
Tabletop
Dimensions (H x W x D)
without microphone
61 x 190 x 160 mm (2.4 x 7.5 x 6.3 in)
Weight
without battery
with battery
485 g (1.07 lb)
700 g (1.54 lb)
Color top
Silver (RAL 9022)
Color base
Charcoal (PH 10736)
Ordering Information
DCN‑WD‑D Wireless Discussion Unit
pluggable microphone, dark base, wireless;
microphone, rims and batteries to be ordered separately
DCN-WD-D
Accessories
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
DCN-DISBCM
DCN‑WLIION‑D Battery Pack for Wireless
Discussion Units
charcoal color, lithium-ion, 7.2 VDC,
4800 mAh
DCN-WLIION-D
DCN‑WPS Power Supply for Wireless
Discussion Units
not approved for some countries
DCN-WPS
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wireless Discussion Units | 17
DCN‑WDCS‑D Wireless
Discussion Unit with
Channel Selector
is also protected against interference from mobile phones
and other equipment that makes use of Bluetooth or
microwave signals.
Security
Wireless communication means extra security
considerations. The DCN Wireless system and discussion
units therefore feature 128‑bits AES encryption to prevent
eavesdropping and unauthorized access. Encryption
ensures the information within the system remains
confidential.
Channel selector
The unit has a built-in channel selector that makes it
suitable for discussions in which more than one language
is used, and simultaneous interpretations are available.
The channel selector includes two up-and-down channel
select keys, and a display showing the number and the
abbreviation of the languages. This enables rapid
selection of the required language channel.
Microphones
A socket is provided to connect the pluggable
microphones which are available in short and long stem
versions (DCN‑MICS and DCN‑MICL, to be ordered
separately).
Features
Headphones and loudspeakers
▶ Used as delegate or chairman unit
The unit also accommodates two headphone connections,
so the speaker can be heard clearly even with excessive
background noise. To prevent acoustic feedback the builtin loudspeaker is muted when the microphone is on. If
enabled, the headphone volume is also automatically
reduced to prevent acoustic feedback when the
microphone is on.
▶ Channel selector with number and abbreviated
channel name
▶ Separate battery pack, easy to change and charge
▶ Advanced power saving techniques
▶ Low susceptibility to electromagnetic interference
▶ Auto microphone-off
▶ Auto search for own network
▶ Auto switch-off when out of range
Rims and buttons
Different rims are available to allow matching with the
interior (DCN‑DISR, to be ordered separately).
The unit can be used as:
To the participant the most important part of a
conference system is the discussion unit. Bosch has built
on the elegant design of the DCN Next Generation
discussion units to create a new series of wireless
discussion units with unrivalled looks and features.
The DCN‑WDCS‑D Wireless Discussion Unit with Channel
selector enables participants to speak, register a requestto-speak, listen to the speaker or to an interpreter of their
choice.
Functions
Speech intelligibility
Maximum speech intelligibility is guaranteed at all times.
Operating in the 2.4 GHz (license free) band, the wireless
discussion units produce crystal-clear sound due to a very
high signal-to-noise ratio and antenna diversity. This
means the signal is transmitted along different
propagation paths, ensuring optimal receipt. The system
www.boschsecurity.com
•
•
•
•
a single delegate unit
a dual delegate unit
a chairman unit (DCN‑DISBCM chairman buttons, to
be ordered separately)
a single delegate unit with auxiliary button (to be used
as an usher call, for example).
Battery maintenance
Simple battery maintenance is essential in a wireless
system. A unique feature of Bosch's wireless discussion
units is the separate rechargeable battery packs
(DCN‑WLIION, to be ordered separately). These Lithiumion battery packs can be removed and replaced in a
matter of seconds, providing maximum flexibility in
recharge scheduling.
Controls and Indicators
On front
•
•
•
Alphanumeric display for language channel selection
with number and abbreviated channel name
Channel up and down selection buttons
Microphone button with a red or green illuminated
ring:
- Red indicates microphone is active
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
18 | DCN Conference Solutions | Wireless Discussion Units
1
•
-
green indicates request-to-speak accepted
Headphone volume control buttons
On rear
•
•
Out-of-range indicator
Battery low indicator
Under base
•
•
Recessed ‘De-init’ switch
Mode select switches (delegate, chairman, etc.)
Interconnections
• Socket for pluggable microphone
• Two 3.5 mm (0.14 in) headphone sockets stereo jack
type
• DC power input from DCN‑WPS (accessible when
battery pack is removed)
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
Ordering Information
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
DCN-DISBCM
DCN‑WLIION‑D Battery Pack for Wireless
Discussion Units
charcoal color, lithium-ion, 7.2 VDC,
4800 mAh
DCN-WLIION-D
DCN‑WPS Power Supply for Wireless
Discussion Units
not approved for some countries
DCN-WPS
DCN-FCWD10 Flight Case for 10 Wireless
Discussion Units
light grey, can hold 10 wireless discussion
units and 2 charging units
DCN-FCWD10
Electrical
Frequency response
30 Hz - 20 kHz
Headphone load impedance
>32 ohm <1k ohm
Output power
2 x 15 mW/32 ohm
Mechanical
Mounting
Tabletop
Dimensions (H x W x D)
without microphone
61 x 190 x 160 mm (2.4 x 7.5 x 6.3 in)
Weight
without battery
495 g (1.10 lb)
with battery
710 g (1.57 lb)
Color top
Silver (RAL 9022)
Color base
Charcoal (PH 10736)
Ordering Information
DCN‑WDCS‑D Wireless Discussion Unit
with Channel Selector
pluggable microphone, dark base; microphone, rims and batteries to be ordered separately
DCN-WDCS-D
Accessories
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wireless Discussion Units | 19
DCN‑WDD‑D Wireless Dual
Discussion Unit
Security
Wireless communication means extra security
considerations. The DCN Wireless system and discussion
units therefore feature 128‑bits AES encryption to prevent
eavesdropping and unauthorized access. Encryption
ensures the information within the system remains
confidential.
Microphones
A socket is provided to connect the pluggable
microphones which are available in short and long stem
versions (DCN‑MICS and DCN‑MICL, to be ordered
separately).
Headphones and loudspeakers
The unit also accommodates two separate headphone
connections with individual volume control on either side
of the unit, allowing one unit to serve two delegates. It
can be converted to a full dual-use unit by replacing the
microphone button with two separate buttons for
individual microphone control and individual delegate
identification (DCN‑DISBDD dual-use buttons, to be
ordered separately).
Features
▶ Two separate headphone connections with individual
volume control
▶ Useable as single/dual delegate or chairman unit
▶ Separate battery pack, easy to change and charge
▶ Advanced power saving techniques
▶ Low susceptibility to electromagnetic interference
▶ Auto microphone-off
▶ Auto-search for own network
▶ Auto switch-off when out of range
To prevent acoustic feedback the built-in loudspeaker is
muted when the microphone is on. If enabled, the
headphones volume is also automatically reduced to
prevent acoustic feedback when the microphone is on.
Rims and buttons
Different rims are available to allow matching with the
interior (DCN‑DISR, to be ordered separately).
The unit can be used as:
•
•
•
•
To the participant the most important part of a
conference system is the discussion unit. Bosch has built
on the elegant design of the DCN Next Generation
discussion units to create a new series of wireless
discussion units with unrivalled looks and features.
The DCN‑WDD‑D Wireless Dual Discussion Unit enables
participants to speak, register a request-to-speak, and
listen to the speaker.
a single delegate unit
a dual delegate unit
a chairman unit (DCN‑DISBCM chairman buttons, to
be ordered separately)
a single delegate unit with auxiliary button (to be used
as an usher call, for example).
Battery maintenance
Simple battery maintenance is essential in a wireless
system. A unique feature of Bosch's wireless discussion
units are the separate rechargeable battery packs
(DCN‑WLIION, to be ordered separately). These Lithiumion battery packs can be removed and replaced in a
matter of seconds, providing maximum flexibility in
recharge scheduling.
Controls and Indicators
On front
Functions
Speech intelligibility
Maximum speech intelligibility is guaranteed at all times.
Operating in the 2.4 GHz (license free) band, the wireless
discussion units produce crystal-clear sound due to a very
high signal-to-noise ratio and antenna diversity. This
means the signal is transmitted along different
propagation paths, ensuring optimal receipt. The system
is also protected against interference from mobile phones
and other equipment that makes use of Bluetooth or
microwave signals.
www.boschsecurity.com
•
Microphone button with a red or green illuminated
ring (red indicates microphone is active, green
indicates request-to-speak accepted)*
• Two individual headphone volume control buttons
On rear
•
•
Out-of-range indicator
Battery low indicator
Under base
•
•
Recessed ‘De-init’ switch
Mode select switches (delegate, chairman, etc.)
Interconnections
• Socket for pluggable microphone
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
20 | DCN Conference Solutions | Wireless Discussion Units
1
•
•
Two 3.5 mm (0.14 in) headphone sockets stereo jack
type
DC power input from DCN‑WPS (accessible when
battery is removed)
Ordering Information
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
* When unit is used in Dual Delegate mode, this function
is available individually.
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
DCN-DISBCM
DCN-WLIION-D
Certifications and Approvals
DCN‑WLIION‑D Battery Pack for Wireless
Discussion Units
charcoal color, lithium-ion, 7.2 VDC,
4800 mAh
DCN‑WPS Power Supply for Wireless
Discussion Units
not approved for some countries
DCN-WPS
DCN-FCWD10 Flight Case for 10 Wireless
Discussion Units
light grey, can hold 10 wireless discussion
units and 2 charging units
DCN-FCWD10
Region
Certification
Europe
CE
Technical Specifications
Electrical
Frequency response
30 Hz - 20 kHz
Headphone load impedance
>32 ohm <1k ohm
Output power
2 x 15 mW/32 ohm
Mechanical
Mounting
Tabletop
Dimensions (H x W x D)
without microphone
61 x 190 x 160 mm (2.4 x 7.5 x 6.3 in)
Weight
without battery
500 g (1.10 lb)
with battery
715 g (1.57 lb)
Color top
Silver (RAL 9022)
Color base
Charcoal (PH 10736)
Ordering Information
DCN‑WDD‑D Wireless Dual Discussion Unit
dual delegate, pluggable microphone, dark
base, wireless; microphone, rims and batteries to be ordered separately
DCN-WDD-D
Accessories
DCN‑DISBDD Buttons Dual Use (10 sets)
10 sets
DCN-DISBDD
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wireless Discussion Units | 21
DCN‑WDDCS‑D Wireless
Discussion Unit with Dual
Channel Selector
is also protected against interference from mobile phones
and other equipment that makes use of Bluetooth or
microwave signals.
Security
Wireless communication means extra security
considerations. The DCN Wireless system and discussion
units therefore feature 128‑bits AES encryption to prevent
eavesdropping and unauthorized access. Encryption
ensures the information within the system remains
confidential.
Channel selector
The unit has two built-in channel selectors that makes it
suitable for discussions in which more than one language
is used, and simultaneous interpretations are available.
The channel selector includes two up-and-down channel
select keys, and a display showing the number and the
abbreviation of the languages. This enables rapid
selection of the required language channel.
Microphones
A socket is provided to connect the pluggable
microphones which are available in short and long stem
versions (DCN‑MICS and DCN‑MICL, to be ordered
separately).
Features
Headphones and loudspeakers
▶ Used as (dual) delegate or chairman unit
The unit also accommodates two headphone connections,
so the speaker can be heard clearly even with excessive
background noise. To prevent acoustic feedback the builtin loudspeaker is muted when the microphone is on. If
enabled, the headphone volume is also automatically
reduced to prevent acoustic feedback when the
microphone is on.
▶ Dual channel selector with number and abbreviated
channel name
▶ Separate battery pack, easy to change and charge
▶ Advanced power saving techniques
▶ Low susceptibility to electromagnetic interference
▶ Auto microphone-off
▶ Auto search for own network
▶ Auto switch-off when out of range
Rims and buttons
Different rims are available to allow matching with the
interior (DCN‑DISR, to be ordered separately).
The unit can be used as:
To the participant the most important part of a
conference system is the discussion unit. Bosch has built
on the elegant design of the DCN Nex Generation
discussion units to create a new series of wireless
discussion units with unrivalled looks and features.
The DCN‑WDDCS‑D Wireless Discussion Unit with Dual
Channel selector enables participants to speak, register a
request-to-speak, listen to the speaker or to an interpreter
of their choice.
Functions
Speech intelligibility
Maximum speech intelligibility is guaranteed at all times.
Operating in the 2.4 GHz (license free) band, the wireless
discussion units produce crystal-clear sound due to a very
high signal-to-noise ratio and antenna diversity. This
means the signal is transmitted along different
propagation paths, ensuring optimal receipt. The system
www.boschsecurity.com
•
•
•
•
a single delegate unit
a dual delegate unit
a chairman unit (DCN‑DISBCM chairman buttons, to
be ordered separately)
a single delegate unit with auxiliary button (to be used
as an usher call, for example).
Battery maintenance
Simple battery maintenance is essential in a wireless
system. A unique feature of Bosch's wireless discussion
units is the separate rechargeable battery packs
(DCNW‑LIION, to be ordered separately). These Lithiumion battery packs can be removed and replaced in a
matter of seconds, providing maximum flexibility in
recharge scheduling.
Controls and Indicators
On front
•
•
•
Two alphanumeric displays for language channel
selection with number and abbreviated channel name
Two individual channel up and down selection buttons
Two individual microphone buttons with a red or
green illuminated ring:
- Red indicates microphone is active
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
22 | DCN Conference Solutions | Wireless Discussion Units
1
•
-
green indicates request-to-speak accepted*
Two individual headphone volume control buttons
On rear
•
•
Out-of-range indicator
Battery low indicator
Under base
•
•
Recessed ‘De-init’ switch
Mode select switches (delegate, chairman, etc.)
Interconnections
• Socket for pluggable microphone
• Two 3.5 mm (0.14 in) headphone sockets stereo jack
type
• DC power input from DCN‑WPS (accessible when
battery pack is removed)
* When unit is used in Dual Delegate mode, this function
is available individually.
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
Electrical
Ordering Information
DCN‑WDDCS‑D Wireless Discussion Unit
with Dual Channel Selector
pluggable microphone, dark base; microphone, rims and batteries to be ordered separately
DCN-WDDCS-D
Accessories
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
DCN-DISBCM
DCN‑WLIION‑D Battery Pack for Wireless
Discussion Units
charcoal color, lithium-ion, 7.2 VDC,
4800 mAh
DCN-WLIION-D
Frequency response
30 Hz - 20 kHz
Headphone load impedance
>32 ohm <1k ohm
Output power
2 x 15 mW/32 ohm
DCN‑WPS Power Supply for Wireless
Discussion Units
not approved for some countries
DCN-WPS
Tabletop
DCN-FCWD10 Flight Case for 10 Wireless
Discussion Units
light grey, can hold 10 wireless discussion
units and 2 charging units
DCN-FCWD10
Mechanical
Mounting
Dimensions (H x W x D)
without microphone
61 x 190 x 160 mm (2.4 x 7.5 x 6.3 in)
Weight
without battery
515 g (1.14 lb)
with battery
730 g (1.61 lb)
Color top
Silver (RAL 9022)
Color base
Charcoal (PH 10736)
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wireless Discussion Units | 23
DCN‑WDV‑D Wireless
Discussion Unit with
Voting
is also protected against interference from mobile phones
and other equipment that makes use of Bluetooth or
microwave signals.
Security
Wireless communication means extra security
considerations. The DCN Wireless system and discussion
units therefore feature 128‑bits AES encryption to prevent
eavesdropping and unauthorized access. Encryption
ensures the information within the system remains
confidential.
Microphones
A socket is provided to connect the pluggable
microphones which are available in short and long stem
versions (DCN‑MICS and DCN‑MICL, to be ordered
separately).
Voting
The unit has five voting buttons. The yellow indicator rings
around the voting buttons confirm vote selections.
Headphones and loudspeakers
The unit also accommodates two headphone connections,
so the speaker can be heard clearly even in situations with
excessive background noise.
▶ Usable as delegate or chairman unit
To prevent acoustic feedback the built-in loudspeaker is
muted when the microphone is on. If enabled, the
headphones volume is also automatically reduced to
prevent acoustic feedback when the microphone is on.
▶ Separate battery pack, easy to change and charge
Rims and buttons
▶ Advanced power saving techniques
▶ Low susceptibility to electromagnetic interference
Different rims are available to allow matching with the
interior (DCN‑DISR, to be ordered separately).
▶ Auto microphone-off
The unit can be used as:
▶ Auto-search for own network
a single delegate unit
a dual delegate unit
a chairman unit (DCN‑DISBCM chairman buttons, to
be ordered separately)
• a single delegate unit with auxiliary button (to be used
as an usher call, for example).
The unit has five voting buttons. The yellow indicator rings
around the voting buttons confirm vote selections.
Features
▶ Five voting buttons
▶ Auto switch-off when out of range
To the participant the most important part of a
conference system is the discussion unit. Bosch has built
on the elegant design of the DCN Next Generation
discussion units to create a new series of wireless
discussion units with unrivalled looks and features.
•
•
•
Battery maintenance
The DCN‑WDV‑D Wireless Discussion Unit with Voting
enables participants to speak, register a request-to-speak,
listen to the speaker, and vote.
Simple battery maintenance is essential in a wireless
system. A unique feature of Bosch's wireless discussion
units are the separate rechargeable battery packs
(DCN‑WLIION, to be ordered separately). These Lithiumion battery packs can be removed and replaced in a
matter of seconds, providing maximum flexibility in
recharge scheduling.
Functions
Controls and Indicators
Speech intelligibility
Maximum speech intelligibility is guaranteed at all times.
Operating in the 2.4 GHz (license free) band, the wireless
discussion units produce crystal-clear sound due to a very
high signal-to-noise ratio and antenna diversity. This
means the signal is transmitted along different
propagation paths, ensuring optimal receipt. The system
On front
•
Five voting buttons with indicator rings around the
buttons
• Unit activity / delegate presence indicator
• Microphone button with a red or green illuminated
ring. Red indicates microphone is active, green
indicates request-to-speak accepted
• Headphone volume control buttons
On rear
•
www.boschsecurity.com
Out-of-range indicator
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
24 | DCN Conference Solutions | Wireless Discussion Units
1
•
Battery low indicator
Under base
•
•
Ordering Information
Recessed ‘De-init’ switch
Mode select switches (delegate, chairman, etc.)
Interconnections
• Socket for pluggable microphone
• Two 3.5 mm (0.14 in) headphone sockets stereo jack
type
• DC power input from DCN‑WPS (accessible when
battery is removed)
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
DCN-DISBCM
DCN‑WLIION‑D Battery Pack for Wireless
Discussion Units
charcoal color, lithium-ion, 7.2 VDC,
4800 mAh
DCN-WLIION-D
DCN‑WPS Power Supply for Wireless
Discussion Units
not approved for some countries
DCN-WPS
DCN-FCWD10 Flight Case for 10 Wireless
Discussion Units
light grey, can hold 10 wireless discussion
units and 2 charging units
DCN-FCWD10
Electrical
Frequency response
30 Hz - 20 kHz
Headphone load impedance
>32 ohm <1k ohm
Output power
2 x 15 mW/32 ohm
Mechanical
Mounting
Tabletop
Dimensions (H x W x D)
without microphone
61 x 190 x 160 mm (2.4 x 7.5 x 6.3 in)
Weight
without battery
505 g (1.11 lb)
with battery
720 g (1.58 lb)
Color top
Silver (RAL 9022)
Color base
Charcoal (PH 10736)
Ordering Information
DCN‑WDV‑D Wireless Discussion Unit with
Voting
voting, pluggable microphone, dark base,
wireless; microphone, rims and batteries to
be ordered separately
DCN-WDV-D
Accessories
DCN‑DISBDD Buttons Dual Use (10 sets)
10 sets
DCN-DISBDD
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wireless Discussion Units | 25
DCN‑WDVCS‑D Wireless
Discussion Unit with
Voting and Channel
Selector
Functions
1
Speech intelligibility
Maximum speech intelligibility is guaranteed at all times.
Operating in the 2.4 GHz (license free) band, the wireless
discussion units produce crystal-clear sound due to a very
high signal-to-noise ratio and antenna diversity. This
means the signal is transmitted along different
propagation paths, ensuring optimal receipt. The system
is also protected against interference from mobile phones
and other equipment that makes use of Bluetooth or
microwave signals.
Security
Wireless communication means extra security
considerations. The DCN Wireless system and discussion
units therefore feature 128‑bits AES encryption to prevent
eavesdropping and unauthorized access. Encryption
ensures the information within the system remains
confidential.
Channel selector
Features
▶ Used as delegate or chairman unit
▶ Channel selector with number and abbreviated
channel name
The unit has a built-in channel selector that makes it
suitable for discussions in which more than one language
is used, and simultaneous interpretations are available.
The channel selector includes two up-and-down channel
select keys, and a display showing the number and the
abbreviation of the languages. This enables rapid
selection of the required language channel.
Microphones
▶ Separate battery pack, easy to change and charge
A socket is provided to connect the pluggable
microphones which are available in short and long stem
versions (DCN‑MICS and DCN‑MICL, to be ordered
separately).
▶ Advanced power saving techniques
Headphones and loudspeakers
▶ Low susceptibility to electromagnetic interference
The unit also accommodates two headphone connections,
so the speaker can be heard clearly even with excessive
background noise. To prevent acoustic feedback the builtin loudspeaker is muted when the microphone is on. If
enabled, the headphone volume is also automatically
reduced to prevent acoustic feedback when the
microphone is on.
▶ Five voting buttons
▶ Auto microphone-off
▶ Auto search for own network
▶ Auto switch-off when out of range
To the participant the most important part of a
conference system is the discussion unit. Bosch has built
on the elegant design of the DCN Next Generation
discussion units to create a new series of wireless
discussion units with unrivalled looks and features.
The DCN‑WDVCS‑D Wireless Discussion Unit with Voting
and Channel selector enables participants to speak,
register a request-to-speak, listen to the speaker or to an
interpreter of their choice, and vote.
www.boschsecurity.com
Rims and buttons
Different rims are available to allow matching with the
interior (DCN‑DISR, to be ordered separately).
The unit can be used as:
•
•
•
a single delegate unit
a dual delegate unit
a chairman unit (DCN‑DISBCM chairman buttons, to
be ordered separately)
• a single delegate unit with auxiliary button (to be used
as an usher call, for example).
The unit has five voting buttons. The yellow indicator rings
around the voting buttons confirm vote selections.
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
26 | DCN Conference Solutions | Wireless Discussion Units
1
Battery maintenance
Simple battery maintenance is essential in a wireless
system. A unique feature of Bosch's wireless discussion
units is the separate rechargeable battery packs
(DCN‑WLIION, to be ordered separately). These Lithiumion battery packs can be removed and replaced in a
matter of seconds, providing maximum flexibility in
recharge scheduling.
Controls and Indicators
On front
•
•
•
•
•
•
Alphanumeric displays for language channel selection
with number and abbreviated channel name
Channel up and down selection buttons
Five voting buttons with indicator rings around the
buttons
Unit activity / delegate presence indicator
Microphone button with a red or green illuminated
ring:
- Red indicates microphone is active
- green indicates request-to-speak accepted
Headphone volume control buttons
On rear
•
•
Out-of-range indicator
Battery low indicator
Under base
•
•
Recessed ‘De-init’ switch
Mode select switches (delegate, chairman, etc.)
Interconnections
• Socket for pluggable microphone
• Two 3.5 mm (0.14 in) headphone sockets stereo jack
type
DC power input from DCN‑WPS (accessible when battery
pack is removed)
Certifications and Approvals
Region
Certification
Europe
CE
Color top
Silver (RAL 9022)
Color base
Charcoal (PH 10736)
Ordering Information
DCN‑WDVCS‑D Wireless Discussion Unit
with Voting and Channel Selector
Voting, pluggable microphone, dark base; microphone, rims and batteries to be ordered
separately
DCN-WDVCS-D
Accessories
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
DCN-DISBCM
DCN‑WLIION‑D Battery Pack for Wireless
Discussion Units
charcoal color, lithium-ion, 7.2 VDC,
4800 mAh
DCN-WLIION-D
DCN‑WPS Power Supply for Wireless
Discussion Units
not approved for some countries
DCN-WPS
DCN-FCWD10 Flight Case for 10 Wireless
Discussion Units
light grey, can hold 10 wireless discussion
units and 2 charging units
DCN-FCWD10
Technical Specifications
Electrical
Frequency response
30 Hz - 20 kHz
Headphone load impedance
>32 ohm <1k ohm
Output power
2 x 15 mW/32 ohm
Mechanical
Mounting
Tabletop
Dimensions (H x W x D)
without microphone
61 x 190 x 160 mm (2.4 x 7.5 x 6.3 in)
Weight
without battery
520 g (1.15 lb)
with battery
735 g (1.62 lb)
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wireless Discussion Units | 27
DCN‑WLIION‑D Battery
Pack for Wireless Discussion Units
Certifications and Approvals
Region
Certification
Europe
CE
1
Technical Specifications
Electrical
Output Voltage
7.2 VDC
Capacity
4800 mAh
Mechanical
Dimensions (H x W x D)
61.5 x 136 x 22 mm (2.4 x 5.5 x 0.9 in)
Weight
215 g (0.47 lb)
Color
Charcoal (PH 10736)
Ordering Information
Features
▶ Long service life without charge degradation
▶ 20 hours typical use from a full charge
▶ Fully recharges in 3 hours
DCN‑WLIION‑D Battery Pack for Wireless
Discussion Units
charcoal color, lithium-ion, 7.2 VDC,
4800 mAh
DCN-WLIION-D
Accessories
DCN‑WCH05 Charger for 5 Battery Packs
charcoal color, re-charge up to 5 DCNWLIION battery packs
DCN-WCH05
▶ Built-in microprocessor controls charging cycle
▶ Lithium-ion technology
This rechargeable battery is the power source of the
wireless discussion units.
The battery is a high capacity Lithium-ion type, capable of
providing up to 20 hours typical use from a full charge.
Fully charging the DCN-WLIION from empty takes just 3
hours.
Lithium-ion cells avoid the charge degradation issues
associated with other rechargeable battery types. This
offers maximum flexibility for scheduling recharges (no
requirement to fully discharge batteries before
recharging).
The ‘intelligent’ battery has a built-in microprocessor to
control charging current and prevent overloading.
Functions
Controls and Indicators
• Charge capacity LEDs and push-to-test button
Interconnections
• Power / charge connector
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
28 | DCN Conference Solutions | Wireless Discussion Units
1
DCN‑WCH05 Charger for
5 Battery Packs
Technical Specifications
Electrical
Supply Voltage
100 - 240 VAC +/- 10 %
50 – 60 Hz
Maximum power consumption 190 W
Mechanical
Dimensions (H x W x D)
340 x 195 x 82 mm (13.4 x 7.6 x 3.2 in)
Weight (without batteries)
1.4 kg (3.08 lb)
Color
Charcoal (PH 10736)
Ordering Information
Features
▶ Simultaneous charging of up to 5 battery packs
DCN‑WCH05 Charger for 5 Battery Packs
charcoal color, re-charge up to 5 DCNWLIION battery packs
DCN-WCH05
DCN‑WCH05‑JP Charger for 5 Battery
Packs (JP)
Japanese version
DCN‑WCH05-JP
DCN‑WCH05‑US Charger for 5 Battery
Packs (US)
US version
DCN‑WCH05‑US
▶ Recharges from empty in 3 hours
▶ Loop-through mains connector
▶ Auto-ranging PSU, 100 – 240 VAC
This unit can simultaneously re-charge up to 5 DCNWLIION battery packs. The charging status of each pack is
shown on individual charge capacity indicator LEDs.
The unit is suitable for tabletop use, or can be wallmounted.
The loop-through mains voltage connector allows a
maximum number of charging units to be connected in
series to share from the same mains outlet:
•
A maximum 5 chargers can be connected in series for
100 - 127 VAC, 50 - 60 Hertz regions
A maximum 10 chargers can be connected in series for
220 - 240 VAC, 50 - 60 Hertz regions.
Functions
Controls and Indicators
• Charge capacity indicator LEDs on each bin
• Mains power indicator LED
Interconnections
• Mains supply connector
• Loop-through mains connector
Battery pack charging connector
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wireless Discussion Units | 29
DCN‑MICS/L Pluggable
Microphone Short/Long
Stem
DCN‑MICS / DCN‑MICS‑D
100 g (0.22 lb)
DCN‑MICL / DCN‑MICL‑D
115 g (0.25 lb)
1
Color top
DCN‑MICS / DCN‑MICL
Silver (RAL 9022)
DCN‑MICS‑D / DCN‑MICL‑D
Dark (graphite gray)
Ordering Information
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICS‑D Pluggable Short Microphone
Dark
length 310 mm (12.2 inch), dark
DCN-MICS-D
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑MICL‑D Pluggable Long Microphone
Dark
length 480 mm (18.9 inch), dark
DCN‑MICL‑D
Features
▶ Uni‑directional microphone on adjustable stem
▶ Built‑in plop and windshield
The innovative, stylish and ergonomically designed
microphone with an adjustable stem simply plugs directly
into a Discussion unit, Concentus, flush‑mounted
Microphone Connection panels or Interpreter desk. It has
a uni‑directional response for optimum performance even
in noisy conditions, and has low susceptibility to
interference from mobile phones.
Functions
Controls and Indicators
• Red or green illuminator. Red indicates microphone is
active, green indicates request-to-speak accepted
Interconnections
• Connector to plug and fasten the microphone
Technical Specifications
Mechanical
Mounting
Plug and fasten into Discussion units,
Concentus, flush mounted Microphone
connection panels and Interpreter desks
Length
DCN‑MICS / DCN‑MICS‑D
310 mm (12.2 in)
DCN‑MICL / DCN‑MICL‑D
480 mm (18.9 in)
Weight
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
30 | DCN Conference Solutions | Wireless Discussion Units
1
DCN‑DISBDD Buttons Dual
Use (10 sets)
DCN‑DISBCM Buttons
Chairman (10 sets)
DCN-DISBDD buttons for Dual Use Discussion Units
replace the single microphone button on a discussion unit
when used in dual delegate mode.
DCN-DISBCM buttons for Chairman Discussion Units
replace the single microphone button on a discussion unit
when used in chairman mode. These buttons can also be
used for the discussion unit in auxiliary control mode.
Technical Specifications
Technical Specifications
Mechanical
Mounting
Click and fit on any Discussion unit
Color
Silver (RAL 9022)
Mechanical
Mounting
Click and fit on any Discussion unit
Color
Silver (RAL 9022)
Ordering Information
DCN‑DISBDD Buttons Dual Use (10 sets)
10 sets
Bosch Security Systems
DCN-DISBDD
Ordering Information
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
DCN-DISBCM
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wireless Discussion Units | 31
DCN‑UPTK Upgrade
Toolkit
Certifications and Approvals
Region
Certification
Europe
CE
1
Safety according
IEC 60950
EMC according
EN 55022 ITE
EN 55024 ITE
Parts Included
Quantity
Components
1
USB connection cable
1
WDU connection cable
Technical Specifications
Electrical
Features
Power supply DCN‑UPTK
USB powered
Power supply wireless discussion units
DCN-WLIION or
▶ Easy upgrade of the wireless discussion unit
▶ USB powered and interfaced
▶ Easy to install and use
▶ Saves functional compatibility issues between DCN
wireless discussion units
The DCN-UPTK Upgrade Toolkit is used to upgrade
software of a single DCN wireless discussion unit
(DCN‑WDx).
Upgrade software is controlled via the DCN Download &
License Tool.
DCN-WPS
Mechanical
Dimensions (H x W x D)
70 x 120 x 35 mm
(2.76 x 4.72 x 1.38 in)
Weight
400 g (0.88 lb)
Color
Charcoal 10736
Ordering Information
DCN‑UPTK Upgrade Toolkit
to upgrade software of a single DCN wireless
discussion unit
DCN-UPTK
The DCN‑UPTK Upgrade Toolkit, is USB powered and is
installer / user friendly. It consists of a small box with the
required built-in hardware and software interfaces, plus
one standard USB-connection cable and one DCNwireless-discussion-unit-connection-cable.
Functions
Controls and Indicators
• Green LED, next to USB connector, indicates USB
power for DCN‑UPTK available
• Green LED, next to 14‑pole connector, indicates the
DCN‑WDx is powered and switched on
Interconnections
• USB (2.0 compatible) standard connector and cable
to PC
• 14-pole flat-cable connector and cable to the DCN
wireless discussion unit
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
32 | DCN Conference Solutions | Wireless Discussion Units
1
DCN-RCWD10 Roller Case
for 10 Wireless Discussion
Units
Technical Specifications
Mechanical
Dimensions (H x W x D)
695 x 765 x 500 mm
(27.4 x 30.1 x 19.7 in)
Weight (empty)
26.4 kg (58.2 lb)
Color
Light grey
Ordering Information
DCN-RCWD10 Roller Case for 10 Wireless
Discussion Units
light grey, can hold 10 wireless discussion
units and 2 charging units
DCN-RCWD10
Features
▶ Holds 10 wireless discussion units, including
microphones
▶ Also holds 2 battery chargers and 10 batteries
▶ Side panel, which must be removed during charging,
can be stored in the top lid
▶ Easily transportable on fitted wheels
▶ Robust construction with reinforced corners
▶ Shaped foam interior simplifies packing
The DCN-RCWD10 Roller Case accommodates up to 10
wireless discussion units with fitted microphone, long or
short stem (one extra storage position can be used for a
spare unit).
The case can also hold 2 DCN-WCH05 charging units
which slot into place and are easily accessed by removing
the side panel (always leave this panel off when charging
the batteries).
Fitted wheels allow for easy transportation.
Parts Included
Quant.
Component
1
DCN-RCWD10 Roller Case for 10 Wireless Discussion
6
Screws to fix mounting brackets of chargers
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wireless Discussion Units | 33
DCN-FCWD10 Flight Case
for 10 Wireless Discussion
Units
1
Features
▶ Holds 10 wireless discussion units and microphones
▶ Also holds 2 battery chargers and 10 batteries
▶ Easy to move using the handgrip and wheels
▶ Robust construction with reinforced corners
▶ Shaped foam interior simplifies packing
The DCN-FCWD10 Flight Case accommodates up to 10
wireless discussion units complete with battery packs and
microphones (long or short stems).
The case can also hold 2 DCN-WCH05 charging units and
is provided with an extra handgrip and wheels for easy
transportation.
Technical Specifications
Mechanical
Dimensions (H x W x D)
820 x 500 x 300 mm
(32.3 x 19.7 x 12 in)
Weight (empty)
13.8 kg (30.4 lb)
Color
Light grey
Ordering Information
DCN-FCWD10 Flight Case for 10 Wireless
Discussion Units
light grey, can hold 10 wireless discussion
units and 2 charging units
www.boschsecurity.com
DCN-FCWD10
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
34 | DCN Conference Solutions | Wireless Discussion Units
1
DCN‑DISR Rims for
Discussion Units
A rim completes the discussion units. A variety of rims
with different finishes are available to allow matching with
any interior.
Technical Specifications
Mechanical
Mounting
Click and fit on any discussion unit
Color base
DCN-DISRH-SR
Silver (RAL 9022) high gloss
DCN-DISR-SR
Silver (RAL 9022)
DCN-DISR-D
Charcoal (PH 10736)
DCN-DISRMH
High gloss metal
DCN-DISRMS
Semi gloss metal
Ordering Information
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wireless Discussion Units | 35
DCN‑WPS Power Supply
for Wireless Discussion
Units
Mechanical
Dimensions (H x W x D)
65 x 57 x 28 mm (2.56 x 2.24 x 1.10 in)
Weight (per package)
approx. 100 g (0.22 lb)
Color
Black
Ordering Information
DCN‑WPS Power Supply for Wireless
Discussion Units
not approved for some countries
DCN-WPS
Features
▶ Powers wireless discussion units if no battery pack is
present
The DCN-WPS power supply enables wireless discussion
units to be used without a battery.
The DCN-WPS does not provide any battery charging
capability (a DCN-WCH05 charging unit is required). The
unit comes complete with a 1.5 m cable and international
mains supply connectors (Euro, UK, Rest of World).
Note
For countries where the EU- and UKconnector cannot be used, attach the ‘Rest of
World’ connector to your own supplied cable
(this cable must have a connector according
to IEC 60 320 part 1 version C7 on the DCNWPS-side; and a commonly used connector
for your country on the other side).
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
Electrical
Rated input voltage
100-240 VAC (50 – 60 Hz), 150 mA
Rated output voltage
9 VDC (500 mA)
www.boschsecurity.com
Bosch Security Systems
1
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wired Discussion Units | 37
Wired Discussion units
Discussion units are typically used for smaller and
medium sized conferences. The units are ideal when a
flexible system configuration or portable conference
facilities are required. All units are easily plugged into or
removed from the system cabling, which enables the
configuration to be set up quickly and efficiently. The
Discussion unit is available with light- or dark colored
bases. Most units have a pluggable microphone (supplied
separately) available in short and long stem length
versions. The microphones have flexible stems for ease of
use. The unit can be free-standing or fixed using mounting
screws. The units can also be flush mounted in more
permanent installations. Special rugged suitcases that
accommodate complete systems are available for storage
and transport. The units are connected in a simple
daisy‑chain configuration. Alternatively, they can be
connected using a single cable and a trunk splitter to link
the units to the system cabling, with connectors neatly
hidden in the units themselves. This ‘one cable’ aspect of
the DCN Next Generation system means there is no untidy
mess of wires at the back of the units. It is especially
advantageous for TV coverage, where the backs of the
units are on show. The Discussion units range from
standard Discussion with a fixed microphone to
Discussion units with pluggable microphone, a channel
selector and voting that enable contributing delegates to
take part in the decision making process, a vital aspect of
modern conferencing. The Discussion units have 4
different operation modes. All Discussion units can be
used either for normal delegates or as a chairman unit.
The third mode is dual use, in which two delegates each
have their own microphone button for individual
identification. The fourth mode is auxiliary control. In this
mode, the delegate has an extra button next to the
microphone button, which can be used as an usher call,
for example.
www.boschsecurity.com
DCN-DISD
•
•
DCN-DISCS
•
•
DCN-DISDCS
•
•
DCN-DISV
•
DCN-DISVCS
•
•
•
•
•
1
•
•
2
•
•
•
•
•
•
•
1
Voting
•
Channel
Selector
•
•
Pluggable
microphone
•
DCN-DISL
Auxiliary
DCN-DISS
Dual use
Chairman
Discussion units overview
Single
delegate
Wired Discussion Units
•
1
•
All units are delivered with a single delegate button. For
the chairman, dual and auxiliary mode two different sets
of buttons are available: Dual use buttons and chairman
buttons. The chairman buttons can also be used for
auxiliary control. The buttons are easily removed using a
special tool (supplied with the buttons). Sets of buttons
must be ordered separately.
Replacing the button
Button types:
1. Single use button
2. Dual use button
3. Chairman or Auxiliary control button
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
38 | DCN Conference Solutions | Wired Discussion Units
1
Discussion units with long and short microphones
The Discussion units with pluggable microphone are
delivered without microphones. These microphones have
to be ordered separately. Two different lengths of
pluggable microphones are available.
All Discussion units are supplied without rims. The rims
must be ordered separately. Several rims are available in
different finishes. The rims can be mounted without any
tools.
Rims to be mounted on the discussion unit
To secure the loop trough cable of the Discussion unit,
cable clamps can be used.
Mounting the cable clamp
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wired Discussion Units | 39
DCN‑DISS / DCN‑DISL
Discussion Unit with fixed
Microphone
•
•
•
•
Microphone button with a red, green or yellow
illuminated ring. Red indicates microphone is active,
green indicates request-to-speak accepted, and yellow
indicates ‘VIP’
VIP indicator is lit when the delegate is part of the
notebook (only available if PC Software is used)
Headphone volume control buttons
Recessed ‘De-init’ switch
Interconnections
• Two 3.5 mm (0.14 in) stereo jack type headphone
sockets
• 2 m (78.7 in) cable terminated within a molded sixpole circular connector.
• Six-pole circular connector for loop-through
connections
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
Features
Electrical
▶ Low susceptibility to mobile phone interference
Frequency response
▶ Compact, attractive and ergonomic design
Headphone load impedance
> 32 ohm < 1kohm
▶ Fixed microphone
Output power
2 x 15 mW/32 ohm
▶ Built-in loudspeaker
Mechanical
▶ Usable as delegate unit or chairman unit
Mounting
Dimensions (H x W x D)
The Discussion Unit with fixed Microphone enables
participants to speak, register a request-to-speak and
listen to the speaker. The microphone stem is flexible. The
unit also accommodates two headphone connections, so
the speaker can be heard clearly even in situations with
excessive background noise. The built-in loudspeaker is
muted when the microphone is on to prevent acoustic
feedback. Rims are available in a range of colors to match
the interior (DCN-DISR, to be ordered separately).
•
•
•
•
Headphone output level reduction to prevent acoustic
feedback (active when listening to the floor and when
the microphone is on)
The unit can be used a delegate unit or as a chairman
unit (DCN-DISBCM chairman buttons to be ordered
separately).
To lock the loop-through cable, a cable clamp is
available (DCN-DISCLM, to be ordered separately).
The unit is available with two different microphone
lengths and in light and dark colored bases.
Tabletop (portable or fixed mounting)
and flush mounting
(without microphone)
Tabletop
61 x 190 x 116 mm (2.4 x 7.5 x 4.6 in)
Flush mounted
6 x 190 x 120 mm (0.2 x 7.5 x 4.7 in)
Microphone lengths
DCN-DISS
300 mm (11.8 in)
DCN-DISL
470 mm (18.5 in)
Weight
DCN-DISS
880 g (1.94 lb)
DCN-DISL
895 g (1.97 lb)
Color top
Functions
30 Hz to 20 kHz
Silver (RAL 9022)
Color base
DCN-DISS-L
Light Grey (RAL 000 7500)
DCN-DISS-D
Charcoal (PH 10736)
DCN-DISL-D
Charcoal (PH 10736)
Controls and Indicators
• Microphone with red or green indicator
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
40 | DCN Conference Solutions | Wired Discussion Units
1
Ordering Information
DCN‑DISS‑L Discussion Short Microphone
Light
short microphone, light base
DCN-DISS-L
DCN‑DISS‑D Discussion Short Microphone
Dark
short microphone, dark base
DCN-DISS-D
DCN‑DISL‑L Discussion Long Microphone
Light
long microphone, light base
DCN-DISL-L
DCN‑DISL‑D Discussion Long Microphone
Dark
long microphone, dark base
DCN-DISL-D
Accessories
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
DCN-DISBCM
DCN‑DISBDD Buttons Dual Use (10 sets)
10 sets
DCN-DISBDD
DCN‑DISCLM Cable Clamp (25 pcs)
25 pieces
DCN-DISCLM
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wired Discussion Units | 41
DCN‑DISD Basic Discussion Unit
•
•
•
•
Different rims are available to allow matching with the
interior (DCN-DISR, to be ordered separately)
The versatile auxiliary button can be used as an usher
call, for example
To lock the loop-through cable, a cable clamp is
available (DCN-DISCLM, to be ordered separately)
Unit is available in light and dark colored bases
Controls and Indicators
• Microphone button with a red, green or yellow
illuminated ring. Red indicates microphone is active,
green indicates request-to-speak accepted, and yellow
indicates ‘VIP’ (when unit is used in Dual Delegate
mode, this function is available individually)
• VIP indicator is lit when the delegate is part of the
notebook (only available if PC Software is used)
• Two individual headphone volume control buttons
• Recessed ‘De-init’ switch
Features
Interconnections
• Socket for pluggable microphone
• Two 3.5 mm (0.14 in) stereo jack type headphone
sockets
• 2 m (78.7 in) cable terminated within a molded sixpole circular connector.
• Six-pole circular connector for loop-through
connections
▶ Low susceptibility to mobile phone interference
▶ Compact, attractive and ergonomic design
▶ Pluggable microphone
▶ Built-in loudspeaker
▶ Usable as delegate unit, dual delegate unit, chairman
unit or single delegate unit with auxiliary button
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
The Basic Discussion Unit enables participants to speak,
register a request-to-speak and listen to the speaker. A
socket is provided to connect the pluggable microphones
(DCN-MICS and DCN-MICL, to be ordered separately).
The unit also accommodates two separate headphone
connections with individual volume control on either side
of the unit, allowing one unit to serve two delegates. It
can be converted to a full dual-use unit by replacing the
microphone button with two separated microphone
buttons for individual microphone control and individual
delegate identification (DCN-DISBDD dual-use buttons, to
be ordered separately).
Functions
•
•
•
Headphone output level reduction to prevent acoustic
feedback (active when listening to the floor and when
the microphone is on). When unit is used in Dual
Delegate mode, this function is available individually
Built-in loudspeaker speaker is muted when the
microphone is on to prevent acoustic feedback
Unit can be used as a single delegate unit, as a dual
delegate unit, as a chairman unit (DCN-DISBCM
chairman buttons, to be ordered separately) or as a
single delegate unit with auxiliary button
www.boschsecurity.com
Electrical
Frequency response
30 Hz to 20 kHz
Headphone load impedance
> 32 ohm < 1k ohm
Output power
2 x 15 mW/32 ohm
Mechanical
Mounting
Tabletop (portable or fixed mounting)
and flush mounting
Dimensions (H x W x D)
(without microphone)
Tabletop
61 x 190 x 116 mm (2.4 x 7.5 x 4.6 in)
Flush mounted
6 x 190 x 120 mm (0.2 x 7.5 x 4.7 in)
Weight
800 g (1.76 lb)
Color top
Silver (RAL 9022)
Color base
DCN-DISD-L
Light Grey (RAL 000 7500)
DCN-DISD-D
Charcoal (PH 10736)
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
42 | DCN Conference Solutions | Wired Discussion Units
1
Ordering Information
DCN‑DISD‑L Discussion Light
pluggable microphone, light base, microphone and rims to be ordered separately
DCN-DISD-L
DCN‑DISD‑D Discussion Dark
pluggable microphone, dark base, microphone and rims to be ordered separately
DCN-DISD-D
Accessories
DCN‑DISBDD Buttons Dual Use (10 sets)
10 sets
DCN-DISBDD
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
DCN-DISBCM
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISCLM Cable Clamp (25 pcs)
25 pieces
DCN-DISCLM
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wired Discussion Units | 43
DCN‑DISCS Discussion
Unit with Channel Selector
•
•
•
The unit can be used a delegate unit or as a chairman
unit (DCN-DISBCM chairman buttons, to be ordered
separately)
To lock the loop-through cable, a cable clamp is
available (DCN-DISCLM, to be ordered separately)
The unit is available in light and dark colored bases
Controls and Indicators
• Alphanumeric display for language channel selection
with number and abbreviated channel name
• Socket for pluggable microphones (DCN-MICS or
DCN-MICL)
• Microphone button with a red, green or yellow
illuminated ring. Red indicates microphone is active,
green indicates request-to-speak accepted, and yellow
indicates ‘VIP’
• VIP indicator is lit when the delegate is part of the
notebook (only available if PC Software is used)
• Headphones have volume control buttons
• Recessed ‘De-init’ switch
Features
▶ Low susceptibility to mobile phone interference
Interconnections
• Socket for pluggable microphone
• Two 3.5 mm (0.14 in) stereo jack type headphones
sockets
• 2 m (78.7 in) cable terminated with in a molded sixpole circular connector.
• Six-pole circular connector for loop-through
connections
▶ Compact, attractive and ergonomic design
▶ Pluggable microphone
▶ Channel selector with number and abbreviated
channel name
▶ Built-in loudspeaker
▶ Usable as delegate or chairman unit
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
The Discussion Unit with Channel Selector enables
participants to speak, register a request-to-speak and
listen to the speaker. A socket is provided to connect the
pluggable microphones (DCN-MICS and DCN-MICL, to be
ordered separately). The unit has a built-in channel
selector that makes it suitable for discussions in which
more than one language is used and simultaneous
interpretations are available. The channel selector
includes two up and down channel select keys and a
display showing the number and the abbreviation of the
languages, enabling rapid selection of the required
language channel.
Functions
•
•
•
Headphone output level reduction to prevent acoustic
feedback (active when listening to the floor and when
microphone is on)
The built-in loudspeaker speaker is muted when the
microphone is on to prevent acoustic feedback.
A variety of rims (DCN-DISR, to be ordered separately)
are available, so the unit can be matched to the
interior
www.boschsecurity.com
Electrical
Frequency response
30 Hz to 20 kHz
Headphone load impedance
> 32 ohm < 1k ohm
Output power
2 x 15 mW/32 ohm
Mechanical
Mounting
Tabletop (portable or fixed mounting)
and flush mounting
Dimensions (H x W x D)
(without microphone)
Tabletop
61 x 190 x 116 mm (2.4 x 7.5 x 4.6 in)
Flush mounted
6 x 190 x 120 mm (0.2 x 7.5 x 4.7 in)
Weight
800 g (1.76 lb)
Color top
Silver (RAL 9022)
Color base
DCN-DISCS-L
Light Grey (RAL 000 7500)
DCN-DISCS-D
Charcoal (PH 10736)
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
44 | DCN Conference Solutions | Wired Discussion Units
1
Ordering Information
DCN‑DISCS‑L Discussion Channel Selector
Light
pluggable microphone, light base, microphone and rims to be ordered separately
DCN-DISCS-L
DCN‑DISCS‑D Discussion Channel Selector
Dark
pluggable microphone, dark base, microphone and rims to be ordered separately
DCN-DISCS-D
Accessories
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
DCN-DISBCM
DCN‑DISBDD Buttons Dual Use (10 sets)
10 sets
DCN-DISBDD
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑DISCLM Cable Clamp (25 pcs)
25 pieces
DCN-DISCLM
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wired Discussion Units | 45
DCN‑DISDCS Discussion
Unit with Dual Channel
Selector
•
•
•
•
•
•
•
•
Features
▶ Low susceptibility to mobile phones
▶ Compact, attractive and ergonomic design
▶ Pluggable microphone
▶ Two channel selectors with number and abbreviated
channel name
▶ Built-in loudspeaker
▶ Usable as delegate unit, dual delegate unit, chairman
unit or single delegate unit with auxiliary button
The Discussion Unit with Dual Channel Selectors enables
participants to speak, register a request-to-speak and
listen to the speaker. A socket is provided to connect a
pluggable microphone. The unit has two built-in channel
selectors with headphone connections with individual
volume controls on either side of the unit, allowing one
unit to serve two delegates. The channel selectors make it
suitable for discussions in which more than one language
is used and simultaneous interpretations are available.
Each of the channel selectors includes up and down
channel select keys and a display showing the number and
the abbreviation of the channel name, enabling rapid
selection of the required language channel.
The unit can be a full dual use unit by replacing the
microphone button with two separated microphone
buttons for individual microphone control and
individual delegate identification (DCN-DISBDD dual
use buttons, to be ordered separately)
The built-in loudspeaker is muted when the
microphone is on to prevent acoustic feedback.
Two lengths of microphones are available (DCN-MICS
and DCN-MICL, to be ordered separately)
Different colored rims are available to allow matching
with the interior, (DCN-DISR, to be ordered
separately)
The unit can be used as a single delegate unit, as a
dual delegate unit, as a chairman unit (DCN-DISBCM
chairman buttons, to be ordered separately) or as a
single delegate unit with an auxiliary button
The versatile auxiliary button can be used as an usher
call, for example
To lock the loop-through cable, a cable clamp is
available (DCN-DISCLM, to be ordered separately)
The unit is available in light and dark colored bases
Controls and Indicators
• Two alphanumeric displays for language channel
selection with number and abbreviated channel name
• Microphone button with a red, green or yellow
illuminated ring. Red indicates microphone is active,
green indicates request-to-speak accepted, and yellow
indicates ‘VIP’(when unit is used in Dual Delegate
mode, this function is available individually)
• VIP indicator is lit when the delegate is part of the
notebook (only available if PC Software is used)
• Two individual headphone volume control buttons
• Recessed ‘De-init’ switch
Interconnections
• Socket for pluggable microphone
• Two 3.5 mm (0.14 in) stereo jack type headphones
sockets
• 2 m (78.7 in) cable terminated within a molded sixpole circular connector.
• Six-pole circular connector for loop-through
connections
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
Electrical
Frequency response
30 Hz to 20 kHz
Headphone load impedance
> 32 ohm < 1k ohm
Output power
2 x 15 mW/32 ohm
Functions
•
Headphone output level reduction to prevent acoustic
feedback (active when listening to the floor and when
the microphone is on). When unit is used in Dual
Delegate mode, this function is available individually
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
46 | DCN Conference Solutions | Wired Discussion Units
1
Mechanical
Mounting
Tabletop (portable or fixed mounting)
and flush mounting
Dimensions (H x W x D)
(without microphone)
Tabletop
61 x 190 x 116 mm (2.4 x 7.5 x 4.6 in)
Flush mounted
6 x 190 x 120 mm (0.2 x 7.5 x 4.7 in)
Weight
800 g (1.76 lb)
Color top
Silver (RAL 9022)
Color base
DCN-DISDCS-L
DCN-DISDCS-D
Light Grey (RAL 000 7500)
Charcoal (PH 10736)
Ordering Information
DCN‑DISDCS‑L Discussion Dual Channel
Selector Light
pluggable microphone, light base, microphone and rims to be ordered separately
DCN-DISDCS-L
DCN‑DISDCS‑D Discussion Dual Channel
Selector Dark
pluggable microphone, dark base, microphone and rims to be ordered separately
DCN-DISDCS-D
Accessories
DCN‑DISBDD Buttons Dual Use (10 sets)
10 sets
DCN-DISBDD
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
DCN-DISBCM
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑DISCLM Cable Clamp (25 pcs)
25 pieces
DCN-DISCLM
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wired Discussion Units | 47
DCN‑DISV Discussion Unit
with Voting
•
•
•
The unit can be used a delegate unit, as a chairman
unit (DCN-DISBCM chairman buttons to be ordered
separately) or as a delegate unit with auxiliary button.
The auxiliary button is a versatile function, which can
be used as an usher call for example
To lock the loop-through cable, a cable clamp is
available (DCN-DISCLM, to be ordered separately)
The unit is available in light and dark colored bases
Controls and Indicators
• Five voting buttons with indicator rings around the
buttons
• Unit activity/delegate presence indicator
• Microphone button with a red, green or yellow
illuminated ring. Red indicates microphone is active,
green indicates request-to-speak accepted, and yellow
indicates ‘VIP’
• VIP indicator is lit when the delegate is part of the
notebook (only available if PC Software is used)
• Headphone volume control buttons
• Recessed ‘De-init’ switch
Features
▶ Low susceptibility to mobile phone interference
▶ Compact, attractive and ergonomic design
Interconnections
• Socket for pluggable microphone
• Two 3.5 mm (0.14 in) stereo jack type headphone
sockets
• 2 m (78.7 in) cable terminated within a molded sixpole circular connector
• Six-pole circular connector for loop-through
connections
▶ Pluggable microphone
▶ Five voting buttons
Certifications and Approvals
▶ Built-in loudspeaker
▶ Usable as a delegate unit or as a chairman unit
This Discussion Unit with Voting enables participants to
speak, register a request-to-speak, listen to the speaker
and vote. A socket is provided to connect the pluggable
microphones (DCN-MICS and DCN-MICL, to be ordered
separately). The unit has five voting buttons for all types
of voting. The yellow indicator rings around the voting
buttons are used to prompt users to register their
presence, to start voting and to confirm their votes. When
the unit’s attendance LED is yellow, it indicates the
delegate is present.
Functions
•
•
•
•
Headphone output level reduction to prevent acoustic
feedback (active when listening to the floor and when
the microphone is on)
The unit accommodates two headphone connections,
so the speaker can be heard clearly even in situations
with excessive background noise
The built-in loudspeaker is muted when the
microphone is on to prevent acoustic feedback
A variety of rims are available, so the unit can be
matched to the interior. (DCN-DISR, to be ordered
separately).
www.boschsecurity.com
Region
Certification
Europe
CE
Technical Specifications
Electrical
Frequency response
30 Hz to 20 kHz
Headphone load impedance
> 32 ohm < 1k ohm
Output power
2 x 15 mW/32 ohm
Mechanical
Mounting
Tabletop (portable or fixed mounting)
and flush mounting
Dimensions (H x W x D)
(without microphone)
Tabletop
61 x 190 x 116 mm (2.4 x 7.5 x 4.6 in)
Flush mounted
6 x 190 x 120 mm (0.2 x 7.5 x 4.7 in)
Weight
800 g (1.76 lb)
Color top
Silver (RAL 9022)
Color base
DCN-DISV-L
Light Grey (RAL 000 7500)
DCN-DISV-D
Charcoal (PH 10736)
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
48 | DCN Conference Solutions | Wired Discussion Units
1
Ordering Information
DCN‑DISV‑L Discussion Voting Light
pluggable microphone, light base, microphone and rims to be ordered separately
DCN-DISV-L
DCN‑DISV‑D Discussion Voting Dark
pluggable microphone, dark base, microphone and rims to be ordered separately
DCN-DISV-D
Accessories
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
DCN‑DISBDD Buttons Dual Use (10 sets)
10 sets
DCN-DISBDD
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
DCN-DISBCM
DCN‑DISCLM Cable Clamp (25 pcs)
25 pieces
DCN-DISCLM
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wired Discussion Units | 49
DCN‑DISVCS Discussion
Unit with Voting and
Channel Selection
Functions
•
•
•
•
•
•
Features
▶ Low susceptibility to mobile phone interference
▶ Compact, attractive and ergonomic design
▶ Pluggable microphone
▶ Five voting buttons
▶ Channel selector with number and abbreviated
Channel name
▶ Built-in loudspeaker
▶ Usable as a delegate unit or as a chairman unit
Headphone output level reduction to prevent acoustic
feedback. (active when listening to the floor and when
the microphone is on)
The built-in loudspeaker is muted when the
microphone is on to prevent acoustic feedback
A variety of rims (DCN-DISR, to be ordered separately)
are available to allow matching to the interior,
The unit can be used as a delegate unit, as a chairman
unit (DCN-DISBCM chairman buttons to be ordered
separately) or as a delegate unit with auxiliary button.
The versatile auxiliary button can be used as an usher
call, for example
To lock the loop-through cable, a cable clamp is
available (DCN-DISCLM, to be ordered separately)
The unit is available in light and dark colored bases
Controls and Indicators
• Five voting buttons with indicator rings around the
buttons
• Unit activity / delegate presence indicator
• Alphanumeric display for language channel selection
with number and abbreviated channel name
• Microphone button with a red, green or yellow
illuminated ring. Red indicates microphone is active,
green indicates request-to-speak accepted, and yellow
indicates ‘VIP’.
• VIP indicator is lit when the delegate is part of the
notebook (only available if PC Software is used)
• Headphones volume control buttons
• Recessed ‘De-init’ switch
Interconnections
• Socket for pluggable microphone
• Two 3.5 mm (0.14 in) stereo jack type headphone
sockets
• 2 m (78.7 in) cable terminated within a molded sixpole circular connector.
• Six-pole circular connector for loop-through
connections
Certifications and Approvals
The Discussion Unit with Voting and Channel Selector
enables participants to speak, register a request-to-speak,
listen to the speaker and vote. A socket is provided to
connect the pluggable microphones (DCN-MICS and DCNMICL, to be ordered separately). The unit has five voting
buttons for all types of voting. The yellow indicator rings
around the voting buttons are used to prompt users to
register their presence, to start voting and to confirm
their vote. When the unit’s attendance LED is yellow, it
indicates the delegate is present.
The unit has a built-in channel selector, which makes it
suitable for discussions in which more than one language
is used and simultaneous interpretations are available.
The channel selector includes up and down channel select
keys and a display showing the number and the
abbreviation of the languages, enabling rapid selection of
the required language channel.
www.boschsecurity.com
Region
Certification
Europe
CE
Technical Specifications
Electrical
Frequency response
30 Hz to 20 kHz
Headphone load impedance
> 32 ohm < 1k ohm
Output power
2 x 15 mW/32 ohm
Mechanical
Mounting
Tabletop (portable or fixed mounting)
and flush mounting
Dimensions (H x W x D)
(without microphone)
Tabletop
61 x 190 x 116 mm (2.4 x 7.5 x 4.6 in)
Flush mounted
6 x 190 x 120 mm (0.2 x 7.5 x 4.7 in)
Weight
800 g (1.76 lb)
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
50 | DCN Conference Solutions | Wired Discussion Units
1
Color top
Silver (RAL 9022)
Color base
DCN-DISVCS-L
Light Grey (RAL 000 7500)
DCN-DISVCS-D
Charcoal (PH 10736)
Ordering Information
DCN‑DISVCS‑L Discussion Voting Channel
Selector Light
pluggable microphone, light base, microphone and rims to be ordered separately
DCN-DISVCS-L
DCN‑DISVCS‑D Discussion Voting Channel
Selector Dark
pluggable microphone, dark base, microphone and rims to be ordered separately
DCN-DISVCS-D
Accessories
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑DISBDD Buttons Dual Use (10 sets)
10 sets
DCN-DISBDD
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
DCN-DISBCM
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑DISCLM Cable Clamp (25 pcs)
25 pieces
DCN-DISCLM
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wired Discussion Units | 51
DCN‑DISR Rims for
Discussion Units
1
A rim completes the discussion units. A variety of rims
with different finishes are available to allow matching with
any interior.
Technical Specifications
Mechanical
Mounting
Click and fit on any discussion unit
Color base
DCN-DISRH-SR
Silver (RAL 9022) high gloss
DCN-DISR-SR
Silver (RAL 9022)
DCN-DISR-D
Charcoal (PH 10736)
DCN-DISRMH
High gloss metal
DCN-DISRMS
Semi gloss metal
Ordering Information
DCN‑DISRH‑SR Rim High Gloss Silver
(10 pcs)
silver, high gloss, 10 pieces
DCN-DISRH-SR
DCN‑DISR‑SR Rim Silver (10 pcs)
silver, 10 pieces
DCN-DISR-SR
DCN‑DISR‑D Rim Dark (10 pcs)
dark, 10 pieces
DCN-DISR-D
DCN‑DISRMH Rim Metal High Gloss
(10 pcs)
metal, high gloss, 10 pieces
DCN-DISRMH
DCN‑DISRMS Rim Metal Semi Gloss
(10 pcs)
metal, semi gloss, 10 pieces
DCN-DISRMS
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
52 | DCN Conference Solutions | Wired Discussion Units
1
DCN‑MICS/L Pluggable
Microphone Short/Long
Stem
DCN‑MICS / DCN‑MICS‑D
100 g (0.22 lb)
DCN‑MICL / DCN‑MICL‑D
115 g (0.25 lb)
Color top
DCN‑MICS / DCN‑MICL
Silver (RAL 9022)
DCN‑MICS‑D / DCN‑MICL‑D
Dark (graphite gray)
Ordering Information
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICS‑D Pluggable Short Microphone
Dark
length 310 mm (12.2 inch), dark
DCN-MICS-D
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑MICL‑D Pluggable Long Microphone
Dark
length 480 mm (18.9 inch), dark
DCN‑MICL‑D
Features
▶ Uni‑directional microphone on adjustable stem
▶ Built‑in plop and windshield
The innovative, stylish and ergonomically designed
microphone with an adjustable stem simply plugs directly
into a Discussion unit, Concentus, flush‑mounted
Microphone Connection panels or Interpreter desk. It has
a uni‑directional response for optimum performance even
in noisy conditions, and has low susceptibility to
interference from mobile phones.
Functions
Controls and Indicators
• Red or green illuminator. Red indicates microphone is
active, green indicates request-to-speak accepted
Interconnections
• Connector to plug and fasten the microphone
Technical Specifications
Mechanical
Mounting
Plug and fasten into Discussion units,
Concentus, flush mounted Microphone
connection panels and Interpreter desks
Length
DCN‑MICS / DCN‑MICS‑D
310 mm (12.2 in)
DCN‑MICL / DCN‑MICL‑D
480 mm (18.9 in)
Weight
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Wired Discussion Units | 53
DCN‑DISBCM Buttons
Chairman (10 sets)
DCN‑DISBDD Buttons Dual
Use (10 sets)
DCN-DISBCM buttons for Chairman Discussion Units
replace the single microphone button on a discussion unit
when used in chairman mode. These buttons can also be
used for the discussion unit in auxiliary control mode.
DCN-DISBDD buttons for Dual Use Discussion Units
replace the single microphone button on a discussion unit
when used in dual delegate mode.
Technical Specifications
Technical Specifications
Mechanical
Mechanical
Mounting
Click and fit on any Discussion unit
Color
Silver (RAL 9022)
Mounting
Click and fit on any Discussion unit
Color
Silver (RAL 9022)
Ordering Information
Ordering Information
DCN‑DISBCM Buttons Chairman (10 sets)
10 sets
www.boschsecurity.com
DCN-DISBCM
DCN‑DISBDD Buttons Dual Use (10 sets)
10 sets
DCN-DISBDD
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
54 | DCN Conference Solutions | Wired Discussion Units
1
DCN‑DISCLM Cable Clamp
(25 pcs)
DCN‑FCDIS Flight Case for
10 Discussion Units
The cables can be secured to the DCN‑CCU2 trunk
outputs using the DCN‑DISCLM cable clamp to prevent
them from being pulled out accidentally.
Features
▶ Rugged construction with reinforced corners
▶ Simplifies packing and unpacking
▶ Easy to carry and store
Technical Specifications
Mechanical
Mounting
Click and fit on any Discussion unit
Color
Charcoal (PH 10736)
The DCN-FCDIS Flight Case for Discussion units
accommodates 10 Discussion units with attached
microphones.
Ordering Information
DCN‑DISCLM Cable Clamp (25 pcs)
25 pieces
DCN-DISCLM
Technical Specifications
Mechanical
Dimensions (H x W x D)
430 x 665 x 255 mm
(16.9 x 26.2 x 10 in)
Weight
9.3 kg (20.5 lb)
Color
grey
Ordering Information
DCN‑FCDIS Flight Case for 10 Discussion
Units
can hold 10 discussion units with microphones
Bosch Security Systems
DCN-FCDIS
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Concentus Units | 55
DCN-CON
•
DCN-CONCS
•
Chairman
ID-card
reader
Graphical
LCD
Voting
Channel
Selector
Concentus units overview
Pluggable
microphone
Concentus Units
•
•
•
DCN-CONFF
•
•
•
•
•
DCN-CONCM
•
•
•
•
•
•
Tabletop Concentus units
Concentus units are typically used for larger conferences.
The units are ideal when a flexible configuration or
portable facilities are required. All units are easily plugged
into or removed from the system cabling, which enables
the conference system to be set up quickly and efficiently.
The unit has a pluggable microphone (supplied
separately) available in either short or long stem versions.
The microphones have flexible stems for ease of use. The
unit can be free-standing or fixed using mounting screws.
The Concentus units can also be flush-mounted in more
permanent installations. Storage and transport is
simplified by rugged suitcases that accommodate
complete systems.
The units can be connected in a simple daisy chain
configuration. Alternatively, they can be connected using
one thin cable and a trunk splitter to connect the unit to
the system cabling, with connectors neatly hidden in the
units. This ‘one cable’ aspect of the DCN Next Generation
system means there is no untidy mess of wires at the back
of the units. This ‘clean’ configuration is especially
advantageous for TV coverage, where the backs of the
units are on show.
The Concentus units range from standard Concentus units
to Concentus with chip card reader, graphic LCD screen
and channel selector, up to chairman units with a priority
key and advanced options. All Concentus units provide
voting facilities that enable contributing delegates to take
part in the decision making process, a vital aspect of
modern conferencing.
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
56 | DCN Conference Solutions | Concentus Units
1
DCN‑CON Concentus
Basic
•
Green ‘Request-to-speak’ confirmation indicator
Yellow ‘VIP’ indicator. ‘VIP’ LED is lit when the
delegate unit is part of the notebook, which is only
available when PC control software is used
Five voting buttons with yellow LED confirmation
indicators These can be used to register:
- PRESENT, YES (+), NO (-), ABSTAIN (X),
(parliamentary voting)
- Numerals: 1 to 5 (multiple choice or opinion polls)
- Rating scale: - -, -, 0, +, ++ (audience response)
Connections
• Socket for pluggable microphone
• 2 m (78.7 in) cable terminated in a molded six-pole
circular connector
• Six-pole circular connector for loop-through
connections
• Eight-pole modular jack connector for Intercom
Handset LBB 3555/00 and external present and Fraud
contact e.g. a fingerprint reader
Certifications and Approvals
Features
Region
Certification
Europe
CE
▶ Low susceptibility to mobile phones
▶ Compact, attractive delegate unit
▶ Built-in fold-away flat-panel loudspeaker
Technical Specifications
▶ Five voting buttons
Mechanical
▶ Cable connections located underneath the unit
▶ External present and fraud contact
The DCN-CON is the standard delegate conference unit
that enables delegates to speak, register a request-tospeak, register a response request, listen to the speaker
and vote. It has low susceptibility to interference from
mobile phones. A socket is provided to connect the
pluggable microphones (DCN-MICS and DCN-MICL, to be
ordered separately). The flat-panel loudspeaker offers
superior acoustics with minimal feedback, thus increasing
intelligibility. It is automatically muted when the
microphone is activated. When the unit is not being used,
the loudspeaker panel conveniently folds down. There are
five voting buttons for all kind of voting. An external
contact is available to connect external fingerprint
readers.
Functions
Mounting
Tabletop (portable or fixed mounting)
and flush mounting
Dimensions (H x W x D)
(without microphone)
Tabletop
50 x 275 x 155 mm (2.0 x 10.8 x 6.1 in)
Flush mounted
30 x 275 x 155 mm (1.2 x 10.8 x 6.1 in)
Weight
1.4 kg (3.1 lb)
Color top
Charcoal (PH 10736) with silver
(RAL 9022) panel
Color base
Charcoal (PH 10736)
Ordering Information
DCN‑CON Concentus Basic
pluggable microphone, voting, microphone
to be ordered separately
DCN-CON
Accessories
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
Controls and indicators
• Built-in, fold-away, flat-panel loudspeaker,
automatically muted if the microphone is on
• Microphone ‘on/off’ or ‘request-to-speak’ button
• ‘Microphone on’ indicator at the top of the
loudspeaker
• Tri-color indicator above the microphone button:
- Red ‘Microphone on’ indicator
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Concentus Units | 57
DCN‑CONCS Concentus
Channel Selector
•
•
Features
▶ Low susceptibility to mobile phones
Tri-color indicator above the microphone button:
- Red microphone on indicator
- Green ‘Request-to-speak’ confirmation indicator
- Yellow ‘VIP’ indicator. ‘VIP’ is lit when the delegate
unit is part of the notebook, which is only
available when PC control software is used
Five voting buttons with yellow LED confirmation
indicators These can be used to register:
- PRESENT, YES (+), NO (-), ABSTAIN (X),
(parliamentary voting)
- Numerals: 1 to 5 (multiple choice or opinion polls)
- Rating scale: - -, -, 0, +, ++ (audience response)
Interconnections
• Socket for pluggable microphone
• 2 m (78.7 in) cable terminated in a molded six-pole
circular connector
• Socket for external microphone or headset
microphone
• Six-pole circular connector for loop-through
connections
• Eight-pole modular jack connector for Intercom
Handset LBB 3555/00 and external present and fraud
contact e.g. a fingerprint reader
• Left and right 3.5 mm (0.14 in) stereo jack type
headphones sockets
• Connection 3.5 mm (0.14 in) for external microphone
or stereo jack type headset microphone
▶ Compact, attractive delegate unit
▶ Built-in, fold-away, flat-panel loudspeaker
Certifications and Approvals
▶ Five voting buttons
▶ Cable connections located underneath the unit
Region
Certification
▶ External present and fraud contact
Europe
CE
Technical Specifications
The DCN-CONCS is similar to the DCN-CON Standard
Delegate Unit, but includes a built-in language channel
selector. This makes it suitable for conferences where
more than one language is used and simultaneous
interpretations are available. The channel selector
includes up and down select keys and a 2-digit display
with backlighting, enabling rapid selection of the required
language channel. Channel selection is automatically
limited to the number of language channels available. The
flat-panel loudspeaker offers superior acoustics with
minimal feedback, thus increasing intelligibility. When the
unit is not being used, the loudspeaker panel conveniently
folds down.
Functions
Controls and Indicators
• Channel selector with channel number display with
back lighting and channel select keys (up/down)
• Headphone volume control on each side of the unit
• Built-in fold-away flat-panel loudspeaker, automatically
muted if a microphone is on
• Microphone ‘on/off ’ or ‘request-to-speak’ button
• ‘Microphone-on’ indicator at the top of the
loudspeaker
www.boschsecurity.com
Electrical
Headphone connection
Frequency response
30 Hz to 20 kHz
Load impedance
> 32 ohm
Output power
2 x 15 mW/32 ohm
Headset connection
Frequency response
30 Hz - 20 kHz
Load impedance
> 32 ohm
Output power
2 x 15 mW/32 ohm
Nominal microphone input
level
7 mVrms
Overload microphone input
level
> 124 mVrms
Interface data
Recommended external microphone type (or headset microphone)
Element
Electret-condenser
Polar pattern
Omni directional
Operating voltage
5 VDC
Sensitivity
62 dB at 1200 ohm (0 dB = 1 V/mbar at
1 kHz)
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
58 | DCN Conference Solutions | Concentus Units
1
Frequency response
100 Hz to 14 kHz
Connector
3.5 mm (0.14 in) jack mono or stereo
Mechanical
Mounting
Tabletop (portable or fixed mounting)
and flush mounting
Dimensions (H x W x D)
(without microphone)
Tabletop
50 x 275 x 155 mm
2.0 x 10.8 x 6.1 in)
Flush mounted
30 x 275 x 155 mm
(1.2 x 10.8 x 6.1 in)
Weight
1.4 kg (3.1 lb)
Color top
Charcoal (PH 10736) with silver
(RAL 9022) panel
Color base
Charcoal (PH 10736)
Ordering Information
DCN‑CONCS Concentus Channel Selector
pluggable microphone, voting, channel select, 2 headphone sockets, microphone to be
ordered separately
DCN-CONCS
Accessories
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Concentus Units | 59
DCN‑CONFF Concentus
Full Function
Features
▶ Low susceptibility to mobile phones
▶ Compact, attractive delegate unit
▶ Built-in fold-away flat-panel loudspeaker
▶ Five voting buttons
▶ Cable connections located underneath the unit
▶ External present and fraud contact
The top-of-the-range, multi-functional delegate unit meets
the demands of even the largest conferences. It provides
facilities for speaking, registering a request-to-speak,
registering a request-to-respond, listening, voting,
selecting language channels, chip card reading and
displaying conference and user-related information. It has
low susceptibility to interference from mobile phones. It is
stylistically and functionally similar to the DCN-CONCS
Delegate Unit with Channel Selector, but also includes a
chip card reader and a graphic display with backlighting.
When a chip card is inserted into the card reader, the
graphic LCD screen automatically displays user-related
information in the language assigned to the delegate chip
card. The graphic LCD screen has permanent backlighting,
and can display characters from complex European
languages or icon-based-scripts such as Chinese. Channel
selection is automatically limited to the number of
language channels available. The flatpanel loudspeaker
offers superior acoustics with minimal feedback, so
increasing intelligibility. When the unit is not being used,
the loudspeaker panel conveniently folds down.
www.boschsecurity.com
Functions
Controls and Indicators
• Channel selector with channel number display with
back lighting and channel select keys (up/down)
• Headphone volume control on each side of the unit
• Graphic LCD screen. Typical displays include:
- button description
- multi-lingual user instructions
- information on the number of current speakers
- request-to-speak information and confirmation
- voting results
- remaining/elapsed speech time
- public and personal messages
- additional user information
• Five button with LED indicators (for use in
combination with the graphic LCD screen). The soft
buttons can provide users with display information
such as messages, conference- and microphone userrelated information. Depending on the application
software the five soft buttons can be used as voting
buttons with confirmation indicators (yellow LEDs),
enabling the user to register:
- PRESENT, YES(+), NO (-), ABSTAIN (X),
(parliamentary voting)
- Numerals: 1 to 5 (multiple choice or opinion poll
voting)
- Rating scale: - -, - 0, +, ++ (audience response)
• Identification and access control by card reader with
or without PIN
• Identification and access control by card reader with
or without PIN
• Built-in fold-away flat-panel loudspeaker, automatically
muted if a microphone is on
• Microphone ‘on/off ’ or ‘request-to-speak’ button
• ‘Microphone on’ indicator at the top of the
loudspeaker
• Tri-color indicator above the microphone button:
- Red microphone on indicator
- Green ‘Request-to-speak’ confirmation indicator
- Yellow ‘VIP’ indicator. ‘VIP’ is lit when the delegate
unit is part of the notebook, which is only
available when PC control software is used
Interconnections
• Socket for pluggable microphone
• 2 m (78.7 in) cable terminated in a molded six-pole
circular connector
• Socket for external microphone or headset
microphone
• Six-pole circular connector for loop-through
connections
• Eight-pole modular jack connector for Intercom
Handset LBB 3555/00 and external present and fraud
contact e.g. a. fingerprint reader
• Left and right 3.5 mm (0.14 in) stereo jack type
headphones sockets
• Connection 3.5 mm (0.14 in) for external microphone
or stereo jack type headset microphone
Certifications and Approvals
Region
Certification
Europe
CE
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
60 | DCN Conference Solutions | Concentus Units
1
Technical Specifications
Electrical
Headphone connection
Frequency response
30 Hz to 20 kHz
Load impedance
> 32 ohm
Output power
2 x 15 mW/32 ohm
Headset connection
Frequency response
30 Hz - 20 kHz
Load impedance
> 32 ohm
Output power
2 x 15 mW/32 ohm
Nominal microphone input
level
7 mVrms
Overload microphone input
level
> 124 mVrms
Interface data
Recommended external microphone type (or headset microphone)
Element
Electret-condenser
Polar pattern
Omni directional
Operating voltage
5 VDC
Sensitivity
62 dB at 1200 ohm (0 dB = 1 V/mbar at
1 kHz)
Frequency response
100 Hz to 14 kHz
Connector
3.5 mm (0.14 in) jack mono or stereo
Mechanical
Mounting
Tabletop (portable or fixed mounting)
and flush mounting
Dimensions (H x W x D)
(without microphone)
Tabletop
50 x 275 x 155 mm
(2.0 x 10.8 x 6.1 in)
Flush mounted
30 x 275 x 155 mm
(1.2 x 10.8 x 6.1 in)
Weight
1.4 kg (3.1 lb)
Color top
Charcoal (PH 10736) with silver
(RAL 9022) panel
Color base
Charcoal (PH 10736)
Ordering Information
DCN‑CONFF Concentus Full Function
pluggable microphone, voting, channel select, 2 headphone sockets, graphical display,
microphone to be ordered separately
DCN-CONFF
Accessories
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Concentus Units | 61
DCN‑CONCM Concentus
Chairman
Features
▶ Low susceptibility to mobile phones
▶ Compact, attractive delegate unit
▶ Built-in, fold-away, flat-panel loudspeaker
▶ Five voting buttons
▶ Cable connections located underneath the unit
▶ External present and fraud contact
The stylish and ergonomically designed chairman unit has
all the necessary facilities to enable the user to chair a
conference. It has low susceptibility to interference from
mobile phones Similar in appearance to the DCN-CONFF
Delegate Unit, the DCN-CONCM Chairman Unit includes a
microphone priority button. When pressed, the priority
button causes all currently active delegate microphones to
be temporarily or permanently switched off, allowing the
chairman to take control of the meeting. The chairman
unit can also be used to start, stop or suspend voting,
cancel a request-to-speak, turn off all active microphones
and recall messages for display. A graphic LCD screen
with permanent backlighting can display characters from
complex European languages or icon-based scripts such
as Chinese. Channel selection is automatically limited to
the number of language channels available. The flat-panel
loudspeaker offers superior acoustics with minimal
feedback, so increasing intelligibility. When the unit is not
being used, the loudspeaker panel conveniently folds
down.
www.boschsecurity.com
Functions
Controls and Indicators
• Priority key which causes an optional chime tone to
sound while temporarily or permanently muting all
active delegate units. The chairman microphone
remains active as long as the priority button is
pressed.
• Channel selector with channel number display with
back lighting and channel select keys (up/down)
• Headphone volume control on each side of the unit
• Graphic LCD screen. Typical displays include:
- button description
- multi-lingual user instructions
- information on the number of current speakers
- request-to-speak information and confirmation
- voting results
- remaining/elapsed speech time
- public and personal messages
- additional user information
• Five button with LED indicators (for use in
combination with the graphic LCD screen). The soft
buttons can provide users with display information
such as messages, conference- and microphone userrelated information. Depending on the application
software the five soft buttons can be used as voting
buttons with confirmation indicators (yellow LEDs),
enabling the user to register:
- PRESENT, YES(+), NO (-), ABSTAIN (X),
(parliamentary voting)
- Numerals: 1 to 5 (multiple choice or opinion poll
voting)
- Rating scale: - -, - 0, +, ++ (audience response)
• Identification and access control by card reader with
or without PIN
• Built-in fold-away flat-panel loudspeaker, automatically
muted if a microphone is on
• Microphone ‘on/off ’ or ‘request-to-speak’ button
• ‘Microphone on’ indicator at the top of the
loudspeaker
• Tri-color indicator above the microphone button:
- Red microphone on indicator
- Green ‘Request-to-speak’ confirmation indicator
- Yellow ‘VIP’ indicator. ‘VIP’ is lit when the delegate
unit is part of the notebook, which is only
available when PC control software is used
Interconnections
• Socket for pluggable microphone
• 2 m (78.7 in) cable terminated in a molded six-pole
circular connector
• Socket for external microphone or headset
microphone
• Six-pole circular connector for loop-through
connections
• Eight-pole modular jack connector for Intercom
Handset LBB 3555/00 and external present and fraud
contact e.g., fingerprint reader
• Left and right 3.5 mm (0.14 in) stereo jack type
headphones sockets
• Connection 3.5 mm (0.14 in) for external microphone
or stereo jack type headset microphone
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
62 | DCN Conference Solutions | Concentus Units
1
Certifications and Approvals
Region
Certification
Europe
CE
Ordering Information
DCN‑CONCM Concentus Chairman
pluggable microphone, voting, channel select, 2 headphone sockets, graphical display,
priority key, microphone to be ordered separately
Technical Specifications
Electrical
Headphone connection
Frequency response
30 Hz to 20 kHz
Load impedance
> 32 ohm
Output power
2 x 15 mW/32 ohm
DCN-CONCM
Accessories
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
Headset connection
Frequency response
30 Hz - 20 kHz
Load impedance
> 32 ohm
Output power
2 x 15 mW/32 ohm
Nominal microphone input
level
7 mVrms
Overload microphone input
level
> 124 mVrms
Interface data
Recommended external microphone type (or headset microphone)
Element
Electret-condenser
Polar pattern
Omni directional
Operating voltage
5 VDC
Sensitivity
62 dB at 1200 ohm (0 dB = 1 V/mbar at
1 kHz)
Frequency response
100 Hz to 14 kHz
Connector
3.5 mm (0.14 in) jack mono or stereo
Mechanical
Mounting
Tabletop (portable or fixed mounting)
and flush mounting
Dimensions (H x W x D)
(without microphone)
Tabletop
50 x 275 x 155 mm
(2.0 x 10.8 x 6.1 in)
Flush mounted
30 x 275 x 155 mm
(1.2 x 10.8 x 6.1 in)
Weight
1.4 kg (3.1 lb)
Color top
Charcoal (PH 10736) with silver
(RAL 9022) panel
Color base
Charcoal (PH 10736)
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Concentus Units | 63
DCN‑MICS/L Pluggable
Microphone Short/Long
Stem
DCN‑MICS / DCN‑MICS‑D
100 g (0.22 lb)
DCN‑MICL / DCN‑MICL‑D
115 g (0.25 lb)
1
Color top
DCN‑MICS / DCN‑MICL
Silver (RAL 9022)
DCN‑MICS‑D / DCN‑MICL‑D
Dark (graphite gray)
Ordering Information
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICS‑D Pluggable Short Microphone
Dark
length 310 mm (12.2 inch), dark
DCN-MICS-D
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑MICL‑D Pluggable Long Microphone
Dark
length 480 mm (18.9 inch), dark
DCN‑MICL‑D
Features
▶ Uni‑directional microphone on adjustable stem
▶ Built‑in plop and windshield
The innovative, stylish and ergonomically designed
microphone with an adjustable stem simply plugs directly
into a Discussion unit, Concentus, flush‑mounted
Microphone Connection panels or Interpreter desk. It has
a uni‑directional response for optimum performance even
in noisy conditions, and has low susceptibility to
interference from mobile phones.
Functions
Controls and Indicators
• Red or green illuminator. Red indicates microphone is
active, green indicates request-to-speak accepted
Interconnections
• Connector to plug and fasten the microphone
Technical Specifications
Mechanical
Mounting
Plug and fasten into Discussion units,
Concentus, flush mounted Microphone
connection panels and Interpreter desks
Length
DCN‑MICS / DCN‑MICS‑D
310 mm (12.2 in)
DCN‑MICL / DCN‑MICL‑D
480 mm (18.9 in)
Weight
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
64 | DCN Conference Solutions | Concentus Units
1
LBB 3555/00 DCN
Intercom Handset
Technical Specifications
Mechanical
Mounting
Tabletop or wall-mounted using the 2
screw holes on the cradle
Dimensions (H x W)
53 x 210 mm (2.08 x 8.26 in)
Weight
250 g (0.55 lb)
Color
Charcoal (PH 10736)
Ordering Information
LBB 3555/00 DCN Intercom Handset
with coiled handset cable with 2 m reach, sixpole RJ45 connector
LBB3555/00
Features
▶ Ideal for intercom applications
▶ For use with all Concentus and Dual Delegate
Interface
▶ Can be permanently mounted to wall, chair or
tabletop
Lightweight and compact, this robust and attractively
styled handset and cradle enables private 2-way
conversation between conference participants. The
handset is hard-wired to the cradle by a coiled cable, 0.5
m (19.6 in) long when coiled, and 2 m (78.7 in) uncoiled.
The cable is terminated with a six-pole RJ45 connector for
connection to Concentus and Dual Delegate Interface.
When used in permanent installations, the unit is easily
mounted to a tabletop or wall using the two screws.
Functions
Interconnections
• Six-pole RJ45 socket
Certifications and Approvals
Region
Certification
Europe
CE
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Concentus Units | 65
DCN‑FCCON Flight Case
for 10 Concentus Units
1
Features
▶ Rugged construction with reinforced corners
▶ Simplifies packing and unpacking
▶ Easy to carry and store
▶ Shaped foam interior
The DCN-FCCON Flight Case accommodates 10
Concentus units. There is also a special cover
compartment for housing 10 microphones (standard and
long).
Technical Specifications
Mechanical
Dimensions (H x W x D)
430 x 665 x 255 mm
(16.9 x 26.2 x 10 in)
Weight
9.3 kg (20.5 lb)
Color
Dark grey
Ordering Information
DCN‑FCCON Flight Case for 10 Concentus
Units
can hold 10 Concentus units with microphones
www.boschsecurity.com
DCN-FCCON
Bosch Security Systems
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Flush Mounted Units | 67
Flush Mounted Units
1
The broad range of DCN Next Generation flush mounted
equipment is used for creating individual system
contribution units for custom solutions. Flush mounted
equipment is ideal for use in permanent installations
where portability is not required. It can be installed into
either tabletops or seat arm rests.
The DCN Next Generation flush‑mount range won the
prestigious iF product design award and it’s available in
high‑style silver and dark charcoal finishes matching
different decors.
All conference functions and facilities of tabletop
contribution units are also available in flush mounted
versions. Because of the modular set‑up it offers great
flexibility; depending on the required functionality, a
selection of the different flush mounted units can be
made.
How to use the flush position tool
In the examples below, several flush mount configurations
are shown. They range from a basic solution with only a
hand microphone to a complete solution for chairman
with voting and intercom.
Mounting
The units can be mounted in wood or metal. When
mounting into a metal surface, the click-to-fit mechanism
available on all flush-mounting units is used to secure the
units into cut-outs on tabletops or the arm rests of seats.
Configuration with basic microphone functionality
Click-to-fit mechanism
Flush mount configuration with dual microphones
When mounting into a wooden surface the units are
secured by using DCN-FCOUP Couplings. First the
Couplings have to be placed into surface, and then the
units are clicked into the Couplings. To place the DCNFCOUP Couplings at the correct position, the DCN-FPT
Flush Positioning Tool can be used.
Flush mount configuration with dual microphones and
loudspeakers
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
68 | DCN Conference Solutions | Flush Mounted Units
1
Flush mount configuration with dual microphones,
loudspeakers, voting and ID‑card readers
Flush mount configuration with chairman priority control,
microphones, loudspeaker, voting, ID‑card reader and
Intercom
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Flush Mounted Units | 69
DCN‑DDI Dual Delegate
Interface
Features
▶ Dual Delegate mode for two microphones and two
voting and card panels
▶ Two microphone/line inputs
▶ Outputs to headphones or loudspeakers
▶ Range of mounting options
▶ Use for entrance/exit registration
▶ Shared microphone with dual microphone control
The Dual Delegate Interface is intended for use in flush
mounted custom solutions. It enables a number of
functions to be added, making it suitable for chairmen and
delegates. Such functions include facilities for connecting
a Voting Panel, with or without a Card reader
(DCN‑FVCRD and DCN-FV). In addition, two separate
audio inputs are provided that can also be used as line
inputs. Each input can be assigned its own seat number,
allowing the DCN-DDI to serve two delegate positions.
Settings are available to assign the Dual Delegate
Interface for use as a delegate unit, a dual delegate,
chairman unit, entrance/exit unit or ambient microphone.
The ambient microphone is located in the conference
venue, and automatically switched on when no other
delegate unit or chairman unit microphones are active. In
this way, interpreters always have audio contact with
conference venue.
•
•
The unit is suitable for Hand-Held Microphones (DCNFHH) or Pluggable Microphones (DCN-MICS, DCNMICL) with Microphone Connection Panel (DCN-FMIC)
and Microphone Control Panel (DCN-FMICB)
The unit provides a single connection for an Intercom
Handset (LBB 3555/00).
Controls and Indicators
• Three Switches per input with the following
possibilities:
- Microphone or line selection
- Asymmetrical microphone input, symmetrical
microphone/ line input, or symmetrical
microphone input with phantom power selection
- Input attenuation selection of 0, 6, 12 or 18 dB +/3 dB input level fine adjustment potentiometer
per input Interconnection
• Remote control inputs (switches) and outputs (LEDs)
matching the DCN microphones and control panels
• Switch to select the different modes of the DCN-DDI:
- Dual delegate
- Chairman
- Dual delegate, one microphone
- Dual delegate, muted loudspeakers
- Single delegate
- Entrance/Exit
- Ambient microphone
Note
To use the entrance/exit mode, PC control
software is also required.
Interconnections
• Two RJ11 connectors for Microphone Control Panel
DCN‑FMIC, Priority Panel DCN‑FPRIOB, Voting Panel
DCN-FV, Voting and Card Panel DCN‑FVCRD
• RJ11 connector for Intercom Handset LBB 3555/00
• Two balanced audio inputs for line (0 dB), or
microphone (-60 dB) sources, with or without a
phantom power supply (2 x eight-pole 262° DIN-type
socket)
• Six-pole circular connector for loop-through system
cabling
• 2 m (78.7 in) cable terminated with a molded six-pole
circular connector
• Two 3.5 mm (0.14 in) stereo jack sockets for
connection to headphones or to loudspeaker panel
(DCN‑FLSP).
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
Functions
Mechanical
•
Mounting
On wall, under tabletop or seat, in arm
rest or in cable duct
Dimensions (H x W x D)
(excl. cables)
35 x 100 x 170 mm (1.4 x 3.9 x 6.7 in)
Weight
500 g (1.10 lb)
Color
Charcoal (PH 10736)
•
The loudspeaker output is switched off when the
corresponding input is switched on
The unit can be mounted free-standing on a tabletop,
mounted on a wall, or discreetly mounted into
tabletops or into the arm rests of chairs, etc.
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
70 | DCN Conference Solutions | Flush Mounted Units
1
Ordering Information
DCN‑DDI Dual Delegate Interface
for flush mounted custom solutions
Bosch Security Systems
DCN-DDI
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Flush Mounted Units | 71
DCN‑FHH Hand Held
Microphone
Technical Specifications
1
Mechanical
Mounting
Using clamp LBC 1215/01 the microphone may be mounted on a stand, wall
or on a chair
Dimensions (H x W)
215 x 30 mm (8.5 x 1.2 in)
Cable length
DCN-FHH
5 m (16.4 ft)
DCN-FHH-C
Coiled 0.4 m (1.3 ft), un-coiled 1.4 m
(4.6 ft)
Weight
350 g (0.77 lb)
Color
Charcoal (PH 10736)
Ordering Information
DCN‑FHH Hand Held Microphone
cable length 5 m (16.4 ft)
DCN-FHH
DCN‑FHHC Hand Held Microphone
with coiled cable, length un-coiled 1.4 m
(4.6 ft)
DCN-FHHC
Features
▶ Light, portable microphone
▶ Built-in plop and windshield
▶ On/off switch and LED status indicators
The DCN-FHH is a uni-directional, condenser microphone
with built-in plop and windshield. It comfortably fits into
one hand and is ideal for applications where the speaker
is on the move. Two of these microphones can be
connected to the Dual Delegate Interface DCN-DDI.
Functions
Controls and Indicators
• Condenser microphone with built-in plop and
windshield
• Microphone on/off or request-to-speak button
• ‘Microphone on’ indicator (red LED)
• ‘Request-to-speak’ confirmation indicator (green LED)
Certifications and Approvals
Region
Certification
Europe
CE
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
72 | DCN Conference Solutions | Flush Mounted Units
1
DCN-FMIC Flush Microphone Connection Panel
Technical Specifications
Mechanical
Mounting
Click‑to‑fit in a metal panel with a thickness of 2 mm, or in combination with
DCN‑FCOUP couplings and DCN‑FEC end
caps in any surrounding
Dimensions (H x W x D)
40 x 50 x 50 mm
(1.57 x 1.97 x 1.97 in)
Weight
10 g (0.02 lb)
Color
DCN‑FMIC
Silver (RAL 9022)
DCN‑FMIC‑D
Dark (graphite gray)
Ordering Information
Features
▶ Stylish and modern design (IF award)
▶ Channel selector output level control
The Microphone Connection Panel connects the pluggable
microphone DCN‑MICS and DCN‑MICL to one of the audio
inputs to the Dual Delegate Interface (DCN‑DDI).
The Microphone Connection Panel also has an output
which controls the output level of the channel selector.
This means that when the microphone is active, the
output level of the channel selector is reduced to prevent
acoustic feedback.
DCN‑FMIC Flush Microphone Connection
Panel
flush mounted, silver, microphone to be ordered separately
DCN-FMIC
DCN‑FMIC‑D Flush Microphone
Connection Panel Dark
flush mounted, dark, microphone to be ordered separately
DCN-FMIC-D
Accessories
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICS‑D Pluggable Short Microphone
Dark
length 310 mm (12.2 inch), dark
DCN-MICS-D
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑MICL‑D Pluggable Long Microphone
Dark
length 480 mm (18.9 inch), dark
DCN‑MICL‑D
Functions
Interconnections
• 2 m (78.7 in) cable terminated with eight-pole
262° DIN-type plug
• Connector to control output level reduction of the
channel selector (AMP173977-2 socket)
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Flush Mounted Units | 73
DCN‑FMICB Flush Microphone Control Panel
Technical Specifications
1
Mechanical
Mounting
Click‑to‑fit in a metal panel with a thickness of 2 mm, or in combination with
DCN‑FCOUP couplings and DCN‑FEC end
caps in any surrounding
Dimensions (H x W x D)
40 x 50 x 50 mm
(1.57 x 1.97 x 1.97 in)
Weight
200 g (0.44 lb)
Color
DCN‑FMICB
Silver (RAL 9022)
DCN‑FMICB‑D
Dark (graphite gray)
Ordering Information
Features
DCN‑FMICB Flush Microphone Control
Panel
flush mounted, silver
DCN-FMICB
DCN‑FMICB‑D Flush Microphone Control
Panel Dark
flush mounted, dark
DCN-FMICB-D
▶ Stylish and modern design (IF award)
▶ Microphone on/off button
▶ Colored status indicator ring
The Microphone Control Panel is connected to the Dual
Delegate Interface (DCN-DDI) via one of the RJ11 control
inputs.
Functions
Controls and Indicators
• One microphone control button
• Three-color illuminated ring around the microphone
button which can show the following states:
- Red - microphone is active
- Flashing red* - last minute of speech time is active
- Green - the delegate is listed in the request list
- Flashing green - the delegate is the first in the
request list and the next one to get the floor
- Yellow* - the delegate is part of the Notebook and
can control its microphone without interaction of
the operator
* Only available with PC Control Software.
Interconnections
• 2 RJ11 connectors: one for connection to Dual
Delegate Interface (DCN-DDI), and one for loop
through
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
74 | DCN Conference Solutions | Flush Mounted Units
1
DCN‑MICS/L Pluggable
Microphone Short/Long
Stem
DCN‑MICS / DCN‑MICS‑D
100 g (0.22 lb)
DCN‑MICL / DCN‑MICL‑D
115 g (0.25 lb)
Color top
DCN‑MICS / DCN‑MICL
Silver (RAL 9022)
DCN‑MICS‑D / DCN‑MICL‑D
Dark (graphite gray)
Ordering Information
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICS‑D Pluggable Short Microphone
Dark
length 310 mm (12.2 inch), dark
DCN-MICS-D
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑MICL‑D Pluggable Long Microphone
Dark
length 480 mm (18.9 inch), dark
DCN‑MICL‑D
Features
▶ Uni‑directional microphone on adjustable stem
▶ Built‑in plop and windshield
The innovative, stylish and ergonomically designed
microphone with an adjustable stem simply plugs directly
into a Discussion unit, Concentus, flush‑mounted
Microphone Connection panels or Interpreter desk. It has
a uni‑directional response for optimum performance even
in noisy conditions, and has low susceptibility to
interference from mobile phones.
Functions
Controls and Indicators
• Red or green illuminator. Red indicates microphone is
active, green indicates request-to-speak accepted
Interconnections
• Connector to plug and fasten the microphone
Technical Specifications
Mechanical
Mounting
Plug and fasten into Discussion units,
Concentus, flush mounted Microphone
connection panels and Interpreter desks
Length
DCN‑MICS / DCN‑MICS‑D
310 mm (12.2 in)
DCN‑MICL / DCN‑MICL‑D
480 mm (18.9 in)
Weight
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Flush Mounted Units | 75
DCN‑FPRIOB Flush
Priority Panel
Ordering Information
DCN‑FPRIOB Flush Priority Panel
flush mounted, silver
DCN-FPRIOB
DCN‑FPRIOB‑D Flush Priority Panel Dark
flush mounted, dark
DCN-FPRIOB-D
Features
▶ Stylish and modern design (IF award)
▶ Priority on/off button
▶ Red microphone on indicator
The Priority Panel is connected to the Dual Delegate
Interface (DCN-DDI) to one of the RJ11 control inputs.
Functions
Controls and Indicators
• One microphone control button
• Red illuminated ring around the microphone button to
indicate that priority is active
Interconnections
• 2 RJ11 connectors one for connection to DCN-DDI
Dual Delegate Interface and one for loop through
Technical Specifications
Mechanical
Mounting
Click‑to‑fit in a metal panel with a thickness of 2 mm, or in combination with
DCN-FCOUP couplings and DCN‑FEC end
caps in any surrounding
Dimensions (H x W x D)
40 x 50 x 50 mm
(1.57 x 1.97 x 1.97 in)
Weight
200 g (0.44 lb)
Color
DCN‑FPRIOB
Silver (RAL 9022)
DCN‑FPRIOB‑D
Dark (graphite gray)
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
76 | DCN Conference Solutions | Flush Mounted Units
1
DCN‑FLSP Flush Loudspeaker Panel
Ordering Information
DCN‑FLSP Flush Loudspeaker Panel
flush mounted, silver
DCN-FLSP
DCN‑FLSP‑D Flush Loudspeaker Panel
Dark
flush mounted, dark
DCN-FLSP-D
Features
▶ Stylish and modern design (IF award)
▶ Angled for better intelligibility
This loudspeaker panel is intended for use in combination
with the Dual Delegate Interface (DCN-DDI). It consists of
a loudspeaker behind a round grille.
Functions
Interconnections
• 2 m (78.7 in) cable terminated with a 3.5 mm (0.14 in)
stereo jack
Technical Specifications
Mechanical
Mounting
Click-to-fit in a metal panel with a thickness of 2 mm, or in combination with
DCN-FCOUP couplings and DCN-FEC end
caps in any surrounding
Dimensions (H x W x D)
40 x 100 x 100 mm
(1.57 x 3.94 x 3.94 in)
Weight
203 g (0.45 lb)
Color
DCN‑FLSP
Silver (RAL 9022)
DCN‑FLSP‑D
Dark (graphite gray)
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Flush Mounted Units | 77
DCN‑FV Flush Voting
Panel
•
Rating scale: - -, -, 0, +, ++ (used for audience
response)
One blue LED unit active indicator to show that the
system is in normal operation
Interconnections
• Two RJ11 connectors: one for connection to DCN-DDI
Dual Delegate Interface, and one for loop through
• Connector for an external present contact
(AMP173977-3 socket)
Technical Specifications
Mechanical
Mounting
Click-to-fit in a metal panel with a thickness of 2 mm, or in combination with
DCN-FCOUP couplings and DCN-FEC end
caps in any surrounding
Dimensions (H x W x D)
40 x 100 x 40.68 mm
(1.57 x 3.94 x 1.68 in)
Weight
81 g (0.18 lb)
Color
Features
▶ Stylish and modern design (IF award)
DCN‑FV
Silver (RAL 9022)
DCN‑FV‑D
Dark (graphite gray)
▶ External ‘Present’ contact
▶ LED vote confirmation indicators
▶ LED unit active indicator
Ordering Information
DCN‑FV Flush Voting Panel
flush mounted, silver
DCN-FV
DCN‑FV‑D Flush Voting Panel Dark
flush mounted, dark
DCN-FV-D
The Flush Voting Panel allows attendance registration and
six types of voting: parliamentary, audience response,
multiple choice, opinion poll, rating and for/against.
The Flush Voting Panel has an external present contact,
which can be used for an external present or fraud switch.
Fingerprint readers are typical for the external present
contact use.
The Flush Voting Panel can be click‑to‑fit mounted in a
metal panel with a thickness of 2 mm, or can be mounted
in combination with DCN‑FCOUP coupling pieces and
DCN‑FEC end caps in any surface. The Flush Voting Panel
is connected to the Dual Delegate Interface (DCN‑DDI).
Functions
Controls and Indicators
Front
•
Five voting buttons with yellow confirmation
indicators to prompt the user to indicate presence, to
vote and to confirm registration of what is voted. The
buttons and indicators work as follows:
- Yes (+), no (-) and abstain (x) (used for
attendance registration, parliamentary voting and
for/against)
- Numerals 1 to 5 (used for multiple choice, opinion
polls and rating)
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
78 | DCN Conference Solutions | Flush Mounted Units
1
DCN‑FVCRD Flush Voting
ID Card Panel
•
One blue LED unit active indicator to show that the
system is in normal operation. The yellow LED
indicates the validity of the ID card
Interconnections
• 2 RJ11 connectors, one for connection to DCN‑DDI
Dual Delegate Interface and one for loop through
• Connector for an external present contact
(AMP173977-3 socket)
Technical Specifications
Mechanical
Mounting
Click‑to‑fit in a metal panel with a thickness of 2 mm, or in combination with
DCN‑FCOUP couplings and DCN‑FEC end
caps in any surrounding
Dimensions (H x W x D)
40 x 100 x 73.53 mm
(1.57 x 3.94 x 2.89 in)
Weight
104 g (0.23 lb)
Color
Features
DCN‑FVCRD
Silver (RAL 9022)
DCN‑FVCRD‑D
Dark (graphite gray)
▶ Stylish and modern design (IF award)
▶ Identification with ID card
▶ External Present contact
▶ LED vote confirmation indicators
▶ LED unit active indicator
The Flush Voting ID Card Panel has the same functionality
as the Flush Voting Panel (DCN‑FV) with the addition of an
ID card reader.
Ordering Information
DCN‑FVCRD Flush Voting ID Card Panel
flush mounted, silver
DCN-FVCRD
DCN‑FVCRD‑D Flush Voting ID Card Panel
Dark
flush mounted, dark
DCN-FVCRD-D
Accessories
DCN‑IDCRD ID Card (100 pcs)
standard credit-card format, set of 100
DCN-IDCRD
The ID card reader enables identification of delegates to
the DCN Next Generation system, as well as providing a
convenient facility that ensures only authorized delegates
can participate in voting sessions or general conference
proceedings such as microphone use. The unit is
connected to the Dual Delegate Interface DCN-DDI.
Functions
Controls and Indicators
Front
•
Five voting buttons with yellow confirmation
indicators to prompt the user to indicate presence, to
vote and to confirm registration of what is voted. The
buttons and indicators work as follows:
- Yes (+), no (-) and abstain (x) (used for
attendance registration, parliamentary voting and
for/against)
- Numerals 1 to 5 (used for multiple choice, opinion
polls and rating)
- Rating scale: - -, -, 0, +, ++ (used for audience
response)
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Flush Mounted Units | 79
DCN‑FVU Flush Voting
Unit
•
Five voting buttons with yellow confirmation
indicators to prompt the user to indicate presence, to
vote and to confirm registration of what is voted. The
buttons and indicators work as follows:
- Yes (+), no (-) and abstain (x) (used for
attendance registration, parliamentary voting and
for/against)
- Numerals 1 to 5 (used for multiple choice, opinion
polls and rating)
- Rating scale: - -, -, 0, +, ++ (used for audience
response)
• One unit active indicator. A constant lit blue LED
indicates that the system is in normal operation. The
blue LED flashes when the unit detects a
communication fault
Back
•
One de-init/init button
Interconnections
• 1 m (39.4 in) DCN cable terminated with a molded sixpole male circular connector
• 1 m (39.4 in) DCN cable terminated with a molded sixpole female circular connector for loop-through
connection to the DCN network
Note
Features
An unused output cable must be terminated
with an LBB 4118/00 Termination Plug.
▶ Stylish and modern design (IF award)
▶ Allows parliamentary voting, numerals and rating
scale
Technical Specifications
▶ Easily mountable
Mechanical
▶ Direct loop through connection to the DCN network
Mounting
Click‑to‑fit in a metal panel with a thickness of 2 mm, or in combination with
DCN‑FCOUP couplings and DCN‑FEC end
caps in any surrounding
Dimensions (H x W x D)
40 x 100 x 79.42 mm
(1.57 x 3.94 x 3.12 in)
Weight
250 g (0.55 lb)
▶ Economic solution for positions which only require
voting facilities
The Flush Voting Unit allows attendance registration and
six types of voting: parliamentary, audience response,
multiple choice, opinion poll, rating and for/against.
The yellow LED confirmation indicators prompt the user
to indicate presence and to vote and to confirm
registration of what is voted.
The blue LED unit active indicator shows that the system
is in normal operation. The blue LED flashes when the unit
detects a communication fault.
The combination of the voting unit with the end caps
forms a very stylish design, which fits in both modern and
traditional meeting rooms.
The direct connection to the DCN network cable results
into an economic solution for positions which only require
voting facilities
Color
DCN‑FVU
Silver (RAL 9022)
DCN‑FVU‑D
Dark (graphite gray)
Ordering Information
DCN‑FVU Flush Voting Unit
direct loop-through connection to DCN network, flush mounted, silver
DCN-FVU
DCN‑FVU‑D Flush Voting Unit Dark
direct loop‑through connection to DCN network, flush mounted, dark
DCN-FVU-D
Accessories
LBB 4118/00 DCN Termination Plug
use with opened-ended DCN cabling
LBB4118/00
Functions
Controls and Indicators
Front
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
80 | DCN Conference Solutions | Flush Mounted Units
1
DCN‑FCS Flush Channel
Selector
Six-pole circular connector for loop-through
interconnection
Technical Specifications
Electrical
Frequency response
30 Hz - 20 kHz
Headphone Load
impedance
> 32 ohm < 1 k ohm
Output power
2 x 15 mW/32 ohm
Mechanical
Mounting
Flush mounted
Dimensions (H x W x D)
40 x 100 x 78.67 mm
(1.6 x 3.9 x 3.1 in)
Weight
0.3 kg (0.66 lb)
Color
DCN‑FCS
Silver (RAL 9022)
DCN‑FCS‑D
Dark (graphite gray)
Features
▶ Stylish and modern design (IF award)
▶ Automatically adapts to available channels
▶ Built-in “Silent” function
▶ No audio output until the headphone is connected
▶ Flush mountable in tabletops, on top or at the front,
or in arm rests of seats
The Flush Channel Selector is a compact and stylish
single-user audio channel selector for listening by
headphone. It provides a choice of up to 32 high-quality
audio channels used for distribution of interpretation and
floor channels.
Functions
•
•
Built-in “Silent” function; no audio output until one of
the keys has been pressed to eliminate audible noise
from the headphones when not in use
Upon insertion of a headphone the default “floor”
channel (channel 0) is selected with a comfortable
headphone volume and the dimmed backlighting is
activated
Controls and Indicators
• Two push-buttons (up/down) for channel selection
• Two push-buttons (up/down) for headphone volume
control
• Backlit 2‑digit LCD for channel number indication
Interconnection
Ordering Information
DCN‑FCS Flush Channel Selector
flush mounted, silver
DCN-FCS
DCN‑FCS‑D Flush Channel Selector Dark
flush mounted, dark
DCN-FCS-D
Accessories
LBB 3443/00 Lightweight Headphones
high quality sound reproduction, lightweight,
replaceable ear pads and normal cable
LBB3443/00
LBB 3443/10 Lightweight Headphones
Durable Cable
high quality sound reproduction, lightweight,
replaceable ear pads and durable cable
LBB3443/10
LBB 3441/10 Under the Chin Headphones
With 1.2 m (4 ft) cable terminated with
3.5 mm (0.14 in) right‑angled gold‑plated
stereo jack plug.
LBB3441/10
LBB 3442/00 Single Earphone
Lightweight single earphone, 1.2 m (3.94 ft)
cable terminated with 3.5 mm (0.14 in)
right‑angled mono gold‑plated jack plug.
LBB3442/00
LBB 3015/04 High Quality Dynamic
Headphones
Durable, dynamic headphones.
LBB3015/04
DCN‑TTH Table Top Housing (10 pcs)
to hold flush mount units, charcoal, set of 10
DCN-TTH
Interconnections
• 3.5 mm (0.14 in) stereo jack headphone connector
• Connector for external headphone
• 2 m (78.7 in) cable with a molded six-pole circular
connector
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Flush Mounted Units | 81
LBB 3555/00 DCN
Intercom Handset
Technical Specifications
1
Mechanical
Mounting
Tabletop or wall-mounted using the 2
screw holes on the cradle
Dimensions (H x W)
53 x 210 mm (2.08 x 8.26 in)
Weight
250 g (0.55 lb)
Color
Charcoal (PH 10736)
Ordering Information
LBB 3555/00 DCN Intercom Handset
with coiled handset cable with 2 m reach, sixpole RJ45 connector
LBB3555/00
Features
▶ Ideal for intercom applications
▶ For use with all Concentus and Dual Delegate
Interface
▶ Can be permanently mounted to wall, chair or
tabletop
Lightweight and compact, this robust and attractively
styled handset and cradle enables private 2-way
conversation between conference participants. The
handset is hard-wired to the cradle by a coiled cable, 0.5
m (19.6 in) long when coiled, and 2 m (78.7 in) uncoiled.
The cable is terminated with a six-pole RJ45 connector for
connection to Concentus and Dual Delegate Interface.
When used in permanent installations, the unit is easily
mounted to a tabletop or wall using the two screws.
Functions
Interconnections
• Six-pole RJ45 socket
Certifications and Approvals
Region
Certification
Europe
CE
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
82 | DCN Conference Solutions | Flush Mounted Units
1
DCN‑FBP and DCN‑FBPS
Blank Panel
Ordering Information
DCN‑FBP Flush Blank Panel Long (10 pcs)
100 mm wide, flush mounted, silver, set of
10
DCN-FBP
DCN‑FBP‑D Flush Blank Panel Long Dark
(10 pcs)
100 mm wide, flush mounted, dark, set of 10
DCN-FBP-D
DCN‑FBPS Flush Blank Panel Short (10
pcs)
50 mm wide, flush mounted, silver, set of 10
DCN-FBPS
DCN‑FBPS‑D Flush Blank Panel Short Dark
(10 pcs)
50 mm wide, flush mounted, dark, set of 10
DCN-FBPS-D
Features
▶ Stylish and modern design (IF award)
▶ 50 mm or 100 mm wide
The blank panel neatly closes off a slot in a flush mounted
unit that is not in use. The panel can be removed if a
future expansion requires the available slot. Two different
panel widths are available: 100 mm (DCN‑FBP) and
50 mm (DCN‑FBPS).
Technical Specifications
Mechanical
Mounting
Click‑to‑fit in a metal panel with a thickness of 2 mm, or in combination with
DCN‑FCOUP couplings, DCN‑FEC end
caps, in any surrounding
Dimensions (H x W)
DCN-FBP(‑D)
40 x 100 mm (1.57 x 3.94 in)
DCN-FBPS(‑D)
40 x 50 mm (1.57 x 1.97 in)
Weight
DCN‑FBP(‑D)
17 g (0.04 lb)
DCN‑FBPS(‑D)
9 g (0.02 lb)
Color
DCN‑FBP, DCN‑FBPS
Silver (RAL 9022)
DCN‑FBP‑D DCN‑FBPS‑D
Dark (graphite gray)
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Flush Mounted Units | 83
DCN‑FEC Flush End Cap
(50 pcs)
DCN‑FCOUP Flush
Coupling (50 pcs)
1
The couplings are used to connect flush mount panels and
end caps.
Features
▶ Stylish and modern design (IF award)
Technical Specifications
Matching end caps give a finishing touch to the flush
mounted devices. Two end caps are needed per flush
mount position.
Mechanical
Mounting
Screw in to cutout in tabletop
Weight
12 g (0.027 lb)
Color
Black
Technical Specifications
Ordering Information
Mechanical
Mounting
Click-to-fit in DCN-FCOUP couplings
Dimensions (H x W)
40 x 20 mm (1.57 x 0.79 in)
Weight
2 g (0.004 lb)
DCN‑FCOUP Flush Coupling (50 pcs)
for flush mounted units, set of 50
DCN-FCOUP
Color
DCN‑FEC
Silver (RAL 9022)
DCN‑FEC‑D
Dark (graphite gray)
Ordering Information
DCN‑FEC Flush End Cap (50 pcs)
flush mounted, silver, set of 50 pcs
DCN-FEC
DCN‑FEC‑D Flush End Cap (50 pcs)
flush mounted, dark, set of 50 pcs
DCN-FEC-D
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
84 | DCN Conference Solutions | Flush Mounted Units
1
DCN‑FPT Flush Positioning
Tools (2 sets)
DCN‑TTH Table Top
Housing (10 pcs)
This tool enables the flush mount elements to be easily
positioned.
This housing enables the flush mounted panels to be used
in tabletop applications. The panel simply clicks into place
in the housing. It is used with the DCN-FVU voting unit,
but it can also be used for other flush mounted units such
as the DCN-FCS Channel selector for 32 channels.
Technical Specifications
For permanent applications, the housing can be fixed to
the tabletop.
Mechanical
Weight
31 g (0.068 lb)
Color
Charcoal (PH 10736)
Technical Specifications
Mechanical
Ordering Information
DCN‑FPT Flush Positioning Tools (2 sets)
for flush mount couplings
DCN-FPT
Mounting
Free-standing or fixed to the tabletop
Dimensions (H x W x D)
80 x 120 x 105 mm
(3.15 x 4.72 x 4.13 in)
Weight
243 g (0.54 lb)
Color
Charcoal (PH 10736)
Ordering Information
DCN‑TTH Table Top Housing (10 pcs)
to hold flush mount units, charcoal, set of 10
Bosch Security Systems
DCN-TTH
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Flush Mounted Units | 85
DCN‑FET Flush Extraction
Tools
1
Features
▶ Easy panel extraction without damaging and
scratching
▶ Panel extraction from top or bottom
DCN‑FET flush extraction tools are used to easily extract
flush mounted panels.
Parts Included
Quantity
Components
1
Tool for top extracting 50 or 100 mm (1.97 or 3.94 in) panels
1
Tool for top extracting DCN‑MIC panel
1
Tool for top extracting DCN‑FLSP panel
1
Set of spare blocks
1
Tool for bottom extracting 50 mm (1.97 in) panels
1
Tool for bottom extracting 100 mm (3.94 in) panels
Technical Specifications
Mechanical
Color
Black
Material
ABS/Metal
Ordering Information
DCN‑FET Flush Extraction Tools
to extract flush mounted panels
www.boschsecurity.com
DCN-FET
Bosch Security Systems
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Interpretation Units | 87
Interpretation and
Language Distribution
automatically limited to the number of language channels
available. Up to 31 interpretations plus the floor language
can be accessed.
Bosch simultaneous interpretation and language
distribution equipment satisfies the demands of today’s
multilingual conferences, from informal bilingual group
discussions up to full-scale international congresses
where many simultaneous interpretations are required.
The modular design of the interpretation and distribution
products means a made-to-measure interpretation system
can be constructed using a combination of system
elements. Expanding or reducing the system for other
conferences is quickly and easily achieved.
The product range covers virtually all interpretation
requirements. The interpreter desks accommodates up to
31 different languages, and can be used stand-alone or as
part of an integrated, operator-controlled system. When
used stand-alone, the built-in microprocessor allocates
language channels, channel routing and interlocks. In
operator-controlled systems, the desk is used in
combination with dedicated Simultaneous Interpretation
software (DCN‑SWSI) to form an integrated interpretation
network. The Simultaneous Interpretation module
facilitates presetting and monitoring interpretation status
in such a system. It can accommodate direct and relay
interpretations, and has facilities for the creation of 31
interpreter booths, each with up to six interpreters.
Delegate contribution units and channel selection units
are available with facilities to select the required
interpretation.
Integrus system for wireless language distribution
An infrared wireless system is also available for
conference venues. It offers excellent sound quality as
well as freedom of movement for conference participants.
Up to 32 channels can be distributed, and high security is
ensured as infrared cannot pass through walls. The
number of delegates able to receive signals from the
infrared system is theoretically unlimited. For further
information on Bosch infrared language distribution
equipment, please refer to Integrus Databrochure.
Interpretation and Language Distribution
Both wired and wireless language distribution is possible
in DCN systems. Wired language distribution involves
using the DCN system cabling to distribute interpretations
to conference participants. The interpretation(s) can be
listened to via headphones connected to a channel
selector unit, or via a contribution unit with a built-in
channel selector. Rapid channel selection is accomplished
using up and down select keys. Channel selection is
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
88 | DCN Conference Solutions | Interpretation Units
1
DCN‑IDESK Interpreter
Desk
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Features
▶ Low susceptibility to mobile phone interference
▶ Ergonomic design with features for visually impaired
▶ Up to 31 interpretation channels and the original floor
language with an audio bandwidth of 20 kHz
▶ A graphic LCD with backlighting for bright
information display in dark conditions
▶ 5 pre-select keys for relay languages with activation
indication at the display
▶ Compliant to ISO 2603
The DCN-IDESK is a single-user interpreter desk with a
stylish and modern design. It fully conforms to
internationally agreed standards. Clear positioning per
functional area of the desk controls allows intuitive
operation without mistakes.
A socket is provided to connect the pluggable
microphones (DCN-MICS and DCN-MICL, to be ordered
separately).
Functions
•
•
•
•
A maximum of six desks can be installed per booth
Tabletop and flush mountable
Pluggable microphone (DCN-MICS)
Ergonomic design
Controls and Indicators
• A and B output channel with status and selection
indication at the display
• All channels have channel number, language names
and quality level indicated at the display
• Features for visually impaired such as a small bump on
the middle button, and beeps to indicate microphone
on/off and double relay selected
Bosch Security Systems
•
•
•
•
•
•
•
•
Built-in loudspeaker with language channel selector
Speech timer to indicate elapsed time of
interpretation
Speak slowly facility to alert the current speaker to
slow down
Help request to an operator or usher
Booth telephone and intercom indicator
Automatic headset selection when headset connected
Easy programming via menus on the display after
entering the programming mode
Microphone key with surrounding red “on-air”
indicator and green for “booth not in use”
Mute key
Help key
Slow (speak slowly) key
Operator and chairman intercom call keys
Message key with yellow LED indicator
Telephone and Intercom call yellow LED indicators
A and B channel engaged yellow LED indicators
Rotary step control for channel settings (and other
functions).
Pressing this button sets the selection to the first
available channel
LCD with backlighting showing selected and activated
output channel with channel numbers and abbreviated
language names
Loudspeaker rotary volume control
Headphone rotary volume control
Headphone rotary bass and treble tone controls
Beep on/off key
Five Relay language pre-select keys
Floor/auto-relay key with green LED indicators
Rotary step control (same as for speaking section) to
select the relay languages for the relay pre-select keys
and the loudspeaker channel. Pressing this button
sets the selection to the first available channel
LCD with backlighting, showing selected relay
language with channel numbers, abbreviated names
and quality indicators. Also the selected loudspeaker
channel with abbreviated name is shown
Interconnections
• Socket for pluggable microphone
• Headphone or headset connector (five-pole 180° Din
type socket wired according to IEC 574-3)
• 6.3 mm (0.25 in) and 3.5 mm (0.14 in) stereo jack
headphone connectors
• 2 m (78.7 in) DCN cable with molded six-pole circular
connector
• Six-pole circular socket for loop-through connection to
the DCN network
• Eight-pole modular jack connector for connection to
booth telephone, intercom and booth on-air sign
Technical Specifications
Electrical
Headphone connection
Frequency response
30 Hz - 20 kHz
Load impedance
> 32 ohm
Output power
2 x 30 mW/32 ohm
Headset connection
Frequency response
30 Hz - 20 kHz
Load impedance
> 32 ohm
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Interpretation Units | 89
Output power
60 mW/32 ohm
Nominal microphone input
level
7 mVrms
Overload microphone input
level
> 124 mVrms
1
Mechanical
Mounting
Free-standing or mounted on a table
Dimensions (H x W x D)
(with microphone)
82 x 330 x 170 mm (3.2 x 13 x 6.7 in)
Slope
25 degrees
Weight
1.3 kg (2.87 lb)
Color top
Silver (RAL 9022)
Color base
DCN-IDESK-L
Light grey (RAL 000 7500)
DCN-IDESK-D
Charcoal (PH 10736)
Ordering Information
DCN‑IDESK‑L Interpreter Desk Light
with light base, microphone to be ordered
separately
DCN-IDESK-L
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑IDESK‑D Interpreter Desk Dark
with dark base, microphone to be ordered
separately
DCN-IDESK-D
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
Accessories
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
90 | DCN Conference Solutions | Interpretation Units
1
DCN‑MICS/L Pluggable
Microphone Short/Long
Stem
DCN‑MICS / DCN‑MICS‑D
100 g (0.22 lb)
DCN‑MICL / DCN‑MICL‑D
115 g (0.25 lb)
Color top
DCN‑MICS / DCN‑MICL
Silver (RAL 9022)
DCN‑MICS‑D / DCN‑MICL‑D
Dark (graphite gray)
Ordering Information
DCN‑MICS Pluggable Short Microphone
length 310 mm (12.2 inch), silver
DCN-MICS
DCN‑MICS‑D Pluggable Short Microphone
Dark
length 310 mm (12.2 inch), dark
DCN-MICS-D
DCN‑MICL Pluggable Long Microphone
length 480 mm (18.9 inch), silver
DCN-MICL
DCN‑MICL‑D Pluggable Long Microphone
Dark
length 480 mm (18.9 inch), dark
DCN‑MICL‑D
Features
▶ Uni‑directional microphone on adjustable stem
▶ Built‑in plop and windshield
The innovative, stylish and ergonomically designed
microphone with an adjustable stem simply plugs directly
into a Discussion unit, Concentus, flush‑mounted
Microphone Connection panels or Interpreter desk. It has
a uni‑directional response for optimum performance even
in noisy conditions, and has low susceptibility to
interference from mobile phones.
Functions
Controls and Indicators
• Red or green illuminator. Red indicates microphone is
active, green indicates request-to-speak accepted
Interconnections
• Connector to plug and fasten the microphone
Technical Specifications
Mechanical
Mounting
Plug and fasten into Discussion units,
Concentus, flush mounted Microphone
connection panels and Interpreter desks
Length
DCN‑MICS / DCN‑MICS‑D
310 mm (12.2 in)
DCN‑MICL / DCN‑MICL‑D
480 mm (18.9 in)
Weight
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Interpretation Units | 91
DCN‑FCIDSK Flight Case
for 2 Interpreter Desks
1
Features
▶ Rugged construction with reinforced corners
▶ Simplifies packing and unpacking
▶ Easy to carry and store
The DCN-FCIDSK Flight Case for the DCN-IDESK
Interpreter Desk accommodates 2 desks, 2 DCN-MICS
microphones and accessories such as headsets,
headphones and tabletop reading-lights.
Technical Specifications
Mechanical
Dimensions (H x W x D)
235 x 530 x 385 mm
(9.3 x 20.9 x 15.2 in)
Weight
6 kg (13 lb)
Color
Light grey
Ordering Information
DCN‑FCIDSK Flight Case for 2 Interpreter
Desks
can hold 2 interpreter desks with microphones and accessories
www.boschsecurity.com
DCN-FCIDSK
Bosch Security Systems
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Headphones | 93
Headphones
1
An extensive range of headphones is available for use with
conference equipment. The options vary from a single
lightweight earphone to high quality headphones with
solid ear pads or washable soft ear pads. Additionally, an
inductive loop neckband is available for coupling to a
hearing aid.
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
94 | DCN Conference Solutions | Headphones
1
HDP‑LWN Lightweight
Neckband Headphone
Ordering Information
HDP‑LWN Lightweight Neckband
Headphone
High‑quality sound reproduction, lightweight,
replaceable ear pads.
HDP-LWN
Accessories
HDP-LWNEP Earpads for neckband
headphone (50 pairs)
Replacement foam ear pads.
HDP-LWNEP
Features
▶ Comfortable neckband stereo headphone
▶ Lightweight with high quality sound reproduction
▶ Replaceable ear pads
▶ Right‑angled stereo gold‑plated jack plug
Functions
Interconnections
• 1.3 m (4.25 ft) cable terminated with gold-plated 4.5
mm (0.14 in) right‑angled stereo gold‑plated jack plug
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
Electrical
Impedance
32 ohm per earpiece
Audio frequency response
20 Hz to 20 kHz (± 3 dB)
Power handling capacity
30 mW
Sensitivity (1 kHz)
111 dB SPL/earpiece at 1 mW/earpiece
Mechanical
Weight
56 g (0.12 lb)
Finish
Charcoal (PH 10736) with silver
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Headphones | 95
LBB 3443 Lightweight
Headphones
Technical Specifications
1
Electrical
Impedance
32 ohm per earpiece
Audio frequency response
50 Hz to 20 kHz (-10 dB)
Power handling capacity
50 mW
Sensitivity (1 kHz)
98 dB SPL/earpiece at 1 mW/earpiece
Mechanical
Weight
70 g (0.16 lb)
Finish
Charcoal (PH 10736) with silver
Ordering Information
Features
▶ Lightweight with high quality sound reproduction
▶ Replaceable ear pads
▶ Available with normal or durable cable
▶ Separate available solid washable ear pads
▶ Right‑angled gold‑plated jack plug
Functions
LBB 3443/00 Lightweight Headphones
high quality sound reproduction, lightweight,
replaceable ear pads and normal cable
LBB3443/00
LBB 3443/10 Lightweight Headphones
Durable Cable
high quality sound reproduction, lightweight,
replaceable ear pads and durable cable
LBB3443/10
Accessories
LBB 3443/50 Foam Ear Pads for LBB 3443
(50 pairs)
replacement foam ear pads
LBB3443/50
HDP‑LWSP Solid Ear Pads for LBB 3443
(50 pairs)
washable replacement ear pads
HDP-LWSP
These headphones can be fitted with an optional set of
washable ear pads.
Washable ear pads
Interconnections
• 1.3 m (4.25 ft) cable terminated with gold-plated
3.5 mm (0.14 in) angled stereo jack plug
Certifications and Approvals
Region
Certification
Europe
CE
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
96 | DCN Conference Solutions | Headphones
1
LBB 3442/00 Single
Earphone
Features
▶ Lightweight single earphone
▶ Left or right ear use
▶ Right‑angled gold‑plated jack plug
Functions
Interconnections
• 1.2 m (3.94 ft) cable terminated with 3.5 mm (0.14 in)
jack plug
Technical Specifications
Electrical
Impedance
32 ohm
Audio frequency response
100 Hz to 5 kHz (-10 dB)
Power handling capacity
5 mW
Sensitivity (1 kHz)
114 dB SPL/earpiece at 1 mW/earpiece
Mechanical
Weight
25 g (0.06 lb)
Color
Dark grey
Ordering Information
LBB 3442/00 Single Earphone
Lightweight single earphone, 1.2 m (3.94 ft)
cable terminated with 3.5 mm (0.14 in)
right‑angled mono gold‑plated jack plug.
Bosch Security Systems
LBB3442/00
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Headphones | 97
LBB 3441/10 Under the
Chin Headphones
Ordering Information
LBB 3441/10 Under the Chin Headphones
With 1.2 m (4 ft) cable terminated with
3.5 mm (0.14 in) right‑angled gold‑plated
stereo jack plug.
LBB3441/10
Accessories
LBB 3441/50 Ear Tips for LBB 3441
(500 pairs)
for LBB 3441
LBB3441/50
Features
▶ Lightweight stereo headphones
▶ Ergonomic design for use under the chin
▶ Replaceable ear tips
▶ Right-angled, gold-plated stereo jack plug
Functions
Interconnections
• 1.2 m (4 ft) cable terminated with 3.5 mm (0.14 in)
right‑angled gold‑plated stereo jack plug.
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
Electrical
Impedance
150 ohm per earpiece
Audio frequency response
50 Hz to 5 kHz (-10 dB)
Power handling capacity
60 mW
Sensitivity (1 kHz)
107 dB SPL/earpiece at 1 mW/earpiece
Mechanical
Weight
33 g (0.07 lb)
Color
Black
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
98 | DCN Conference Solutions | Headphones
1
HDP‑ILN Induction Loop
Neckband
Features
▶ Lightweight
▶ Used with ‘T-coil’ hearing aids
▶ Gold-plated jack plug
Functions
This induction loop neckband can be used with:
•
•
•
Integrus receivers
CCS800 unit
DCN unit
The neckband magnetically couples the sound signal from
the headphone output to a ‘T-coil’ hearing aid.
Interconnections
• 0.9 m (3ft) cable terminated with a 3.5 mm (0.14 in)
gold‑plated jack plug.
Technical Specifications
Mechanical
Weight
45 g (0.10 lb)
Color
Charcoal with silver
Ordering Information
HDP‑ILN Induction Loop Neckband
Lightweight neckband.
Bosch Security Systems
HDP-ILN
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Headphones | 99
LBB 3015/04 High Quality
Dynamic Headphones
Ordering Information
LBB 3015/04 High Quality Dynamic
Headphones
Durable, dynamic headphones.
LBB3015/04
Accessories
LBB 9095/50 Ear pads for LBB 3015
LBB 9095 (25 pairs)
25 pairs
LBB9095/50
Features
▶ Durable, dynamic headphones
▶ Replaceable ear pads
▶ High-quality sound reproduction
▶ Gold-plated stereo jack plug
Functions
Interconnections
• 1.5 m (5 ft) cable terminated with a 3.5 mm (0.14 in)
stereo jack plug
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
Electrical
Impedance
720 ohm per earpiece
Audio frequency response
250 Hz to 13 kHz (-10 dB)
Power handling capacity
200 mW
Sensitivity (1 kHz)
97 dB SPL/earpiece at
0 dBV/system
96 dB SPL/earpiece at
1 mW/earpiece
Mechanical
Weight
110 g (0.24 lb)
Color
Dark grey
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
100 | DCN Conference Solutions | Headphones
1
LBB 9095/30 Interpreter
Headphones
Ordering Information
LBB 9095/30 Interpreter Headphones
Lightweight, dynamic headphones.
LBB9095/30
Accessories
LBB 9095/50 Ear pads for LBB 3015
LBB 9095 (25 pairs)
25 pairs
LBB9095/50
Features
▶ Durable and dynamic
▶ Replaceable ear pads
▶ High‑quality sound reproduction
Lightweight, dynamic headphones for direct connection to
DCN-IDESK Interpreters Desk.
Functions
Interconnections
• 2.2 m (7 ft) cable terminated with a 6.3 mm (0.25 in)
stereo jack plug
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
Electrical
Impedance
720 ohm per earpiece
Audio frequency response
250 Hz - 13 kHz (-10 dB)
Power handling capacity
200 mW
Sensitivity (1 kHz)
97 dB SPL/earpiece at 0 dBV/system
96 dB SPL/earpiece at 1 mW/earpiece
Mechanical
Weight
125 g (0.28 lb)
Color
Black/grey
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Central Equipment | 101
Central Equipment
1
The Central Control Unit DCN‑CCU2 or DCN‑CCUB2 forms
the heart of the conference management system. Both
CCUs can operate standalone to provide automatic
conference control, or be accessed by an operator via a
PC when more extensive management is required.
In combination with the DCN‑WAP, the DCN‑CCU2 also
forms the heart of a DCN Wireless system, or wireless
flexibility can be added to a wired DCN Next Generation
system for temporary system expansion.
The DCN‑CCU2 can control up to 245 wired contribution
units (such as delegate and chairman units, interpreter
desks) and up to 245 wireless discussion units. If more
capacity is required, multiple DCN‑CCU2s can be
connected to each other to control up to 4000
microphone positions.
The DCN‑CCUB2 can control up to 245 wired contribution
units and cannot be extended with wireless units or
multiple CCUs.
Both CCUs can also provide power for a number of
contribution units. The maximum number depends on the
type of contribution units used in the application.
Advanced audio coupling using the DCN‑CCU2
Via the optical network, a variety of audio couplings are
possible, including coupling small systems with a few
languages into a large system with as many as 31
languages.
It is also possible to extract and insert both digital (AES/
EBU or SPDIF) and analog audio. Other advanced audio
coupling techniques include CobraNet™.
CobraNet™ is a combination of software, hardware and
network protocol, which allows distribution of many realtime, high-quality digital audio channels over an Ethernet
network using CAT5 cables.
CobraNet™ makes it easy to distribute audio in buildings
and connect the DCN system to other audio CobraNet™compatible devices such as Audio Recorders and Audio
Mixers.
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
102 | DCN Conference Solutions | Central Equipment
1
DCN‑CCU2 Central
Control Unit
•
•
•
•
•
•
Features
▶ For DCN Next Generation or DCN wireless systems,
or a combination of the two
•
•
▶ In single‑CCU; maximum 245 wired contribution units,
plus 245 wireless delegate units
•
•
•
▶ For multi‑CCU systems, with up to 30 CCU’s and a
total of 4000 contribution units
•
▶ Voice activated microphone mode for wired and
wireless systems
•
▶ Ethernet connection for configuration and control
computers
•
•
Basic voting control for parliamentary voting
procedure. Delegates can register ‘Present’, ‘Yes’, ‘No’
and ‘Abstain’. The Concentus Chairman unit can start,
stop and suspend the voting. The total results can be
displayed on hall displays and on the LCD screens of
the units
A page function which activates a voting tone. With
this tone the chairman can indicate that a voting
round is about to start
Simultaneous interpretation function with 31 language
channels plus one floor channel
Distribution of up to 10 language channels plus floor
to DCN wireless discussion units
Distribution of up to 31 language channels plus floor
to Integrus receivers, DCN wired channel selectors
Basic intercom function with function to assign
intercom operator and intercom chairman (both can
be called from the interpreter desk)
Stand-alone automatic camera control
Extended conference facilities when using control PC
software or remote controllers
Adjustable sensitivity for the audio inputs
Adjustable level for the audio outputs
Audio insertion facility to connect external audio
processing devices or telephone couplers
The CCU can be assigned a unique name by the
installer for easy identification
VU meter readings to monitor audio inputs and audio
outputs. The audio can be monitored using a
headphone
19” (2U) housing for tabletop or rack mounting
Handgrips for easy transportation
Controls and Indicators
Front
The Central Control Unit (CCU) includes features for
controlling wired and wireless delegate microphones,
distributing simultaneous interpretation and conducting
voting sessions, all without an operator.
•
•
In combination with a PC, this control unit brings greater
sophistication to conference control. Users can access an
extensive range of software modules, each with a specific
function in controlling and monitoring a conference. These
modules greatly expand the capacity to manage a
conference. In the event of PC failure, this control unit will
revert to its stand-alone operation mode, enabling the
conference to proceed.
•
Power on/off switch
2 x 16 Character LCD display for status information
and configuration
• Rotary control to navigate through the LCD menus
Back
•
•
Interconnections
Front
•
One stereo headphone output 3.5 mm (0.14 in)
Back
Functions
•
•
•
•
•
•
•
•
For DCN Next Generation or DCN wireless systems, or
a combination of the two (Maximum one DCN‑WAP
per system)
Basic microphone management facilities
Four operational microphone modes:
- Open: microphone button control with request-tospeak (Auto)
- Override: microphone button with override of
activated microphones (FIFO)
- Voice: voice activated microphones
- Push-to-talk (push and hold button to speak)
Number of open microphones between 1 and 4
Configuration of CCU and system via a display and a
single rotary push button
Bosch Security Systems
Three red LED overload indicators for the DCN
network outputs
Two red LED overload indicators for the optical
connections
Green and yellow LED indicating Ethernet activity
•
•
•
•
•
•
Euro power socket with built‑in fuse
Three DCN outlet sockets including locking facility for
connection of units
Two optical network connections for connection of
Integrus, various audio expanders, CobraNet
interfaces and Wireless Access Point
Two three‑pole XLR balanced audio line inputs with
galvanic separation
Two stereo Cinch unbalanced audio line inputs
Two three-pole XLR balanced audio line output with
galvanic separation
Two stereo Cinch unbalanced audio line outputs
One Ethernet connection for Control PC, Open
Interface or slave CCU
One RS‑232 serial data connectors for controlling
cameras
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Central Equipment | 103
•
One error switch, galvanic separated cross‑over
switch to trigger external equipment in case of errors
detected by the CCU
Parts Included
Quantity
Component
1
DCN-CCU2 Central Control Unit
1
Set of mounting brackets for 19” rack
1
Set of feet
1
System installation and user instruction on DVD
1
US power cord
1
Euro power cord
Ordering Information
DCN‑CCU2 Central Control Unit
Controlling of delegate microphones, distributing simultaneous interpretation and conducting voting sessions.
DCN-CCU2
Technical Specifications
Electrical
Supply voltage
100‑240 Vac 50‑60 Hz
Power consumption
360 W
DCN system supply
40 Vdc, max 85 W per DCN socket
Optical network supply
40 Vdc, max 65 W
Total power supply
320 W
RS‑232 connection
1 x nine‑pole Sub‑D female socket
Frequency response
30 Hz - 20 kHz (-3 dB at nominal level)
THD at nominal level
< 0.5 %
Cross talk attenuation
> 85 dB at 1 kHz
Dynamic range
> 90 dB
Signal-to-noise ratio
> 87 dBA
Audio inputs
XLR nominal input
-12 dBV (+/- 6 dB)
XLR maximum input
+12 dBV
Cinch nominal input
-24 dBV (+/- 6 dB)
Cinch maximum input
+0 dBV
Audio outputs
XLR nominal output
-12 dBV (+6 / -24 dB)
XLR maximum output
+12 dBV
Cinch nominal output
-24 dBV (+6 / -24 dB)
Cinch maximum output
+0 dBV
Mechanical
Mounting
Tabletop or mounted in a 19” rack
Dimensions (H x W x D)
for tabletop use, with feet
92 x 440 x 400 mm
(3.6 x 17.3 x 15.7 in)
for 19” rack use, with brackets
88 x 483 x 400 mm
(3.5 x 19 x 15.7 in)
in front of brackets
40 mm (1.6 in)
behind brackets
360 mm (14.2 in)
Weight
7.9 kg (17.5 lbs)
Color
Charcoal (PH 10736) with silver
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
104 | DCN Conference Solutions | Central Equipment
1
DCN‑CCUB2 Central
Control Unit Basic
•
•
•
•
•
•
•
•
•
•
Features
▶ Cost effective solution for basic DCN Next
Generation systems
•
•
Simultaneous interpretation function with 31 language
channels plus one floor channel
Distribution of up to 31 language channels plus floor
to DCN wired channel selectors
Basic intercom function with function to assign
intercom operator and intercom chairman (both can
be called from the interpreter desk)
Stand‑alone automatic camera control
Extended conference facilities when using control PC
software or remote controllers
Adjustable sensitivity for the audio inputs
Adjustable level for the audio outputs
Audio insertion facility to connect external audio
processing devices or telephone couplers
The CCU can be assigned a unique name by the
installer for easy identification
VU meter readings to monitor audio inputs and audio
outputs. The audio can be monitored using a
headphone
19” (2U) housing for tabletop or rack mounting
Handgrips for easy transportation
▶ Maximum 245 wired contribution units
Controls and Indicators
▶ Ethernet connection for configuration and control
computers
Front
The Central Control Unit (CCU) includes features for
controlling wired delegate microphones, distributing
simultaneous interpretation and conducting voting
sessions, all without an operator.
In combination with a PC, this control unit brings greater
sophistication to conference control. Users can access an
extensive range of software modules, each with a specific
function in controlling and monitoring a conference. These
modules greatly expand the capacity to manage a
conference. In the event of PC failure, this control unit will
revert to its stand-alone operation mode, enabling the
conference to proceed.
Functions
•
•
•
•
•
•
•
For wired DCN Next Generation systems
Basic microphone management facilities
Four operational microphone modes:
- Open: microphone button control with request-tospeak (Auto)
- Override: microphone button with override of
activated microphones (FIFO)
- Voice: voice activated microphones
- Push-to-talk (push and hold button to speak)
Number of open microphones between 1 and 4
Configuration of CCU and system via a display and a
single rotary push button
Basic voting control for parliamentary voting
procedure. Delegates can register ‘Present’, ‘Yes’, ‘No’
and ‘Abstain’. The Concentus Chairman unit can start,
stop and suspend the voting. The total results can be
displayed on hall displays and on the LCD screens of
the units
A page function which activates a voting tone. With
this tone the chairman can indicate that a voting
round is about to start
Bosch Security Systems
•
•
Power on/off switch
2 x 16 Character LCD display for status information
and configuration
• Rotary control to navigate through the LCD menus
Back
•
•
Three red LED overload indicators for the DCN
network outputs
Green and yellow LED indicating Ethernet activity
Interconnections
Front
•
One stereo headphone output 3.5 mm (0.14 in)
Back
•
•
•
•
•
•
•
Euro power socket with built‑in fuse
Three DCN outlet sockets including locking facility for
connection of units
Two stereo Cinch unbalanced audio line inputs
One three‑pole XLR balanced audio line output
Two stereo Cinch unbalanced audio line outputs
One Ethernet connection for Control PC or Open
Interface
One RS‑232 serial data connectors for controlling
cameras
Parts Included
Quantity
Component
1
DCN-CCUB2 Central Control Unit Basic
1
Set of mounting brackets for 19” rack
1
Set of feet
1
System installation and user instruction on DVD
1
US power cord
1
Euro power cord
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Central Equipment | 105
Technical Specifications
Electrical
Supply voltage
100‑240 Vac 50‑60 Hz
Power consumption
295 W
DCN system supply
40 Vdc, max 85 W per DCN socket
Total power supply
255 W
RS‑232 connection
1 x nine‑pole Sub‑D female socket
Frequency response
30 Hz - 20 kHz (-3 dB at nominal level)
THD at nominal level
< 0.5 %
Cross talk attenuation
> 85 dB at 1 kHz
Dynamic range
> 90 dB
Signal-to-noise ratio
> 87 dBA
DCN‑DISCLM Cable Clamp
(25 pcs)
Audio inputs
Cinch nominal input
-24 dBV (+/- 6 dB)
Cinch maximum input
+0 dBV
Audio outputs
XLR nominal output
-12 dBV (+6 / -24 dB)
XLR maximum output
+12 dBV
Cinch nominal output
-24 dBV (+6 / -24 dB)
Cinch maximum output
+0 dBV
Mechanical
Mounting
Tabletop or mounted in a 19” rack
Dimensions (H x W x D)
for tabletop use, with feet
92 x 440 x 400 mm
(3.6 x 17.3 x 15.7 in)
for 19” rack use, with brackets
88 x 483 x 400 mm
(3.5 x 19 x 15.7 in)
in front of brackets
40 mm (1.6 in)
behind brackets
360 mm (14.2 in)
Weight
7.9 kg (17.5 lbs)
Color
Charcoal (PH 10736) with silver
The cables can be secured to the DCN‑CCU2 trunk
outputs using the DCN‑DISCLM cable clamp to prevent
them from being pulled out accidentally.
Technical Specifications
Mechanical
Mounting
Click and fit on any Discussion unit
Color
Charcoal (PH 10736)
Ordering Information
DCN‑DISCLM Cable Clamp (25 pcs)
25 pieces
DCN-DISCLM
Ordering Information
DCN-CCUB2 Central Control Unit Basic
Controlling of delegate microphones, distributing simultaneous interpretation and conducting voting sessions.
www.boschsecurity.com
DCN-CCUB2
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
106 | DCN Conference Solutions | Central Equipment
1
DCN‑WAP Wireless
Access Point
Functions
Controls and Indicators
• LEDs show status of wireless system
Interconnections
• Two optical network connections (second connection
can be used in ‘loop-through’ network)
Certifications and Approvals
Region
Certification
Europe
CE
Installation/Configuration Notes
Features
▶ Secure wireless communication with 128-bits AES
Rijndael encryption
▶ Single cable to power WAP and communicate with
CCU
▶ Mountable on ceiling, wall, or floor stand for best
reception
▶ Typical range 30 m (100 ft)
▶ Compact and elegant award winning design
DCN-WAP mounted on a LBC 1259/01 floor stand
The DCN Wireless Access Point (WAP) links the central
control unit (CCU) and the wireless discussion units by
means of secure wireless communication with 128‑bits
AES Rijndael encryption. It uses one of the three
non‑overlapping‑carriers in the 2.4 GHz band, which is
license‑free worldwide. For extra confidentiality an
automatic blocking function prevents subscription of
unauthorized wireless discussion units.
Technical Specifications
The WAP is linked to the CCU using Bosch's proprietary
optical network, which provides digital optical
communication and power supply over a single cable. The
second optical network connector on the WAP allows the
system network to be expanded from a single branch to a
redundant loop configuration. In this ‘loop‑through’
configuration, DCN Wireless can be interfaced with
compatible Bosch equipment such as Audio Expanders,
CobraNet™ interfaces and the Integrus language
distribution system.
Dimensions (H x W x D)
with bracket
Electrical
Power consumption
4W
Mechanical
Mounting
Ceiling, Wall or Floor Stand (using included bracket)
59 x 284.5 x 201 mm
(2.3 x 11.2 x 7.9 in)
Weight
with bracket
without bracket
907 g (2 lb)
643 g (1.4 lb)
Color
Light grey (RAL 000 7500)
The WAP award winning design enables it to be placed
unobtrusively on a wall, ceiling, or floor stand by using the
universal mounting bracket.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Central Equipment | 107
Ordering Information
DCN‑WAP Wireless Access Point
light grey color, universal mounting bracket
included
1
DCN-WAP
Accessories
LBC 1259/01 Universal Floorstand
Lightweight aluminum construction, foldable,
M10 x 12 reducer flange.
LBC1259/01
DCN‑WFCCCU Flight Case for CCU and
WAP
light grey, can hold two central control units,
or one central control unit, wireless access
point and optical cable
DCN-WFCCCU
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
108 | DCN Conference Solutions | Central Equipment
1
LBC 1259/01 Universal
Floorstand
Adaptable
The floorstand is standard supplied with a 36 mm
(1.42 in) reducer flange with an M10 x 12 threaded pin to
mount different sized equipment, and with an M10 knob
to fix the Wireless Access Point mounting bracket.
Accessories
For storage and ease of transport, a carrier bag is
available with two inside compartments with separate
zippers for holding two universal floorstands (LBC
1259/01). The bag, with Bosch logo, is made from sturdy
black weather-proof nylon. Two handles are fitted for
carrying the bag by hand or over the shoulder.
LM1-CB Carrier Bag (optional)
Features
▶ Multi-purpose, lightweight aluminum stand
Installation/Configuration Notes
▶ For mounting a loudspeaker, wireless access point or
Integrus radiator
▶ Double-braced folding base
▶ Reducer flange for different mountings
▶ Hand-adjustable
▶ Carrier bag for two pieces as optional accessory
This universal floorstand provides effective mounting
solutions for loudspeaker installations, a Wireless Access
Point of the DCN-Wireless system, or a radiator of the
Integrus digital language distribution system. They are
manufactured and finished to the same high standards as
all Bosch products, assuring excellent quality and
guaranteed compatibility throughout the range. The LBC
1259/01 is suited to a wide range of applications where a
secure yet transportable mounting solution is required.
Functions
LBC 1259/01 with DCN Wireless Access Point, LBB 451x/00
Infra‑-red Radiator and XLA 3200 Line Array Loudspeaker
Parts Included
Quantity Component
1
LBC 1259/01 Universal Floorstand
Adjustable and safe
1
36 mm (1.42 in) reducer flange with (M10 x 12) threaded pin
The LBC 1259/01 floorstand is hand-adjustable using a
spring-loaded locking screw for heights between 1.4 and
2.2 m (4.6 and 7.2 ft). An extra safety bolt on the support
can be tightened to ensure the stand remains extended.
1
M10 securing knob for WAP mounting bracket
2
Metal filler rings
This lightweight stand has a double-braced folding base
for extra strength, and a wide leg span to ensure stability.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Central Equipment | 109
Technical Specifications
1
Mechanical
Length: standing
1.4 to 2.2 m (4.6 to 7.2 ft)
Length: folded
1.24 m (4.06 ft)
Width: legs extended
1.32 m (4.33 ft)
Width: legs folded
130 mm (5.1 in)
Weight
4.8 kg (10.58 lb)
Max. centric load
50 kg (110.2 lb)
Material
Aluminum/steel
Color
White aluminum (RAL 9006) with black
parts
Tube diameter
35 mm (1.37 in)
Carrier bag accessory
Dimensions (L x D)
1.25 m x 27 mm (49 x 1.06 in)
Weight
750 g (1.65 lb)
Color
Black with light grey handles
Material
Nylon
Ordering Information
LBC 1259/01 Universal Floorstand
Lightweight aluminum construction, foldable,
M10 x 12 reducer flange.
LBC1259/01
Accessories
LM1‑CB Carrier Bag for two floorstands
Carrier Bag
www.boschsecurity.com
LM1-CB
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
110 | DCN Conference Solutions | Central Equipment
1
DCN‑EPS Extension Power
Supply
Parts Included
Quantity
Component
1
DCN-EPS Extension Power Supply
1
Power cord 1.7 m (66.9 in)
Technical Specifications
Electrical
Supply voltage
105, 115, 125, 220, 230, 240 VAC
Power consumption
350 W
DCN system supply
40 VDC, max 85 W per DCN socket
Mechanical
Mounting
Free-standing on a tabletop or mounted
in a 19” rack unit (required 2U, 19”
width)
Dimensions (H x W x D)
Features
100 x 220 x 308 mm
(3.9 x 8.7 x 12.1 in)
Weight
8.3 kg (18.3 lbs)
▶ Easy to connect to DCN
Color cabinet
Charcoal (PH 10736)
▶ Maximum supply power of 255 W
Color handles
Charcoal (PH 10736)
▶ Built-in DCN network splitter allows installation at
any convenient point in the system cabling
▶ Loop-through cabling
Ordering Information
▶ Switches on automatically when the CCU is switched
on
DCN‑EPS Extension Power Supply
for all regions except North-America
DCN-EPS
▶ All outputs are protected against short circuit
DCN‑EPS‑UL Extension Power Supply UL/
CSA
for the North-America region
DCN-EPS-UL
DCN‑EPS‑JP Extension Power Supply (JP)
Japanese version
DCN‑EPS‑JP
▶ Freestanding on a tabletop or mounted in a 19” rack
The Extension Power Supply unit is used in combination
with a CCU to supply extra power to the DCN network.
Functions
Controls and Indicators
• “Power on” LED indicator
• Three indicators to indicate DCN outlet overload (red
LEDs)
Interconnections
• Euro power socket with built-in fuse holder
• 2 m (78.7 in) DCN cable with molded six-pole circular
connector
• Six-pole circular socket for loop-through connection to
the DCN network
• Three DCN outlet sockets for connection of units, plus
extension power supplies. Each socket is protected
against short-circuit (3 x six-pole circular sockets)
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Central Equipment | 111
LBB 4402/00 Audio
Expander
•
Rotary/push control to navigate through the LCD
menus
Interconnections
Front
•
One stereo headphone output 3.5 mm (0.14 in)
Back
•
•
•
•
•
•
•
Two optical network connections for connecting to
the CCU
Four three-pole XLR balanced audio line inputs with
galvanic separation
Four stereo Cinch unbalanced audio line inputs
Four three-pole XLR balanced audio line outputs with
galvanic separation
Four stereo Cinch unbalanced audio line outputs
Eight control inputs to enable audio inputs and audio
outputs
Five control outputs to indicate channel engaged state
Certifications and Approvals
Features
Region
Certification
▶ Stylish and modern design (IF award)
Europe
CE
▶ Room coupling facility
▶ Versatile audio distribution facility
▶ Optical network for coupling to the CCU
▶ Redundant network capability
Technical Specifications
Electrical
Supply voltage
The audio expander can contribute audio to and distribute
audio from the system. Typical applications are room
coupling and audio distribution.
24 to 48 VDC
Power consumption
7.6 W (DC)
Frequency response
30 Hz to 20 kHz (-3 dB at nominal level)
THD at nominal level
<0.5%
Crosstalk attenuation
>85 dB at 1 kHz
Dynamic range
>90 dB
Signal-to-noise ratioo
>87 dBA
Functions
Audio line inputs
•
XLR nominal input
0 dBV (±6 dB)
XLR maximum input
+12 dBV
Cinch nominal input
+12 dBV (±6 dB)
Cinch maximum input
0 dBV
•
•
•
•
•
•
•
•
•
•
•
Redundant network cabling can be either single
branch or redundant loop
Audio line inputs (of which 2 can be configured as
microphone input) for floor and interpretation
channels
Audio line outputs for floor and interpretation
channels
Flexible routing of floor and interpretation channels
Adjustable sensitivity for the audio inputs
Adjustable level for the audio outputs
Configuration of the Audio Expander via a display and
a single rotary/push button
Each Audio Expander can be assigned a unique name
by the installer for easy identification
VU meter readings to monitor audio inputs and audio
outputs. The audio can be monitored using a
headphone
19” (2U) housing for table top or rack mounting
Handgrips for easy transportation
The unit is powered from the network
Audio mic inputs
Nominal input
57 dBV (±6 dB)
Maximum input
26 dBV
Phantom supply
12 V ±1 V at 15 mA
Audio line outputs
XLR nominal output
12 dBV (+6 / -24 dB)
XLR maximum output
+12 dBV
Cinch nominal output
24 dBV (+6 / -24 dB)
Cinch maximum output
0 dBV
Controls and Indicators
• 2 x 16 Character LCD display for status display and
configuration of the Audio Expander
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
112 | DCN Conference Solutions | Central Equipment
1
Mechanical
Dimensions (H x W x D)
for tabletop use, with feet
92 x 440 x 400 mm
(3.6 x 17.3 x 15.7 in)
for 19” rack use, with brack- 88 x 483 x 400 mm
ets
(3.5 x 19 x 15.7 in)
in front of brackets
40 mm (1.6 in)
behind brackets
360 mm (14.2 in)
Weight
7 kg (15.4 lbs)
Mounting
Tabletop, 19”-rack
Color
Charcoal (PH 10736) with silver
Ordering Information
LBB 4402/00 Audio Expander
Inserts external audio into the system and extracts audio from the system.
Bosch Security Systems
LBB4402/00
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Central Equipment | 113
PRS‑4DEX4 Audio
Expander Digital
Interconnections
Front
•
One stereo headphone output 3.5 mm (0.14 in)
Back
•
•
•
•
•
•
•
Two optical network connections for connecting to
CCU
Two 3-pole XLR AES/EBU stereo inputs for 2 audio
channels per input
Two Cinch SPDIF stereo inputs for 2 audio channels
per input
Two 3-pole XLR AES/EBU stereo outputs for 2 audio
channels per output
Two Cinch SPDIF stereo outputs for 2 audio channels
per output
Eight control inputs to enable audio inputs and audio
outputs
Five control outputs to indicate channel engaged state
Certifications and Approvals
Features
▶ Stylish and modern design (IF award)
Region
Certification
Europe
CE
▶ Room coupling facility
▶ Versatile audio distribution facility
▶ AES/EBU or SPDIF
▶ Sample-rate converters (8 – 96 kHz)
▶ Optical network coupling
▶ Redundant network capability
The digital audio expander can contribute audio to and
distribute audio from the system. Typical applications are
room coupling and audio distribution.
Parts Included
Quant.
Component
1
PRS-4DEX4 Digital Audio Expander
1
Set of mounting brackets for 19” rack
1
Set of feet
1
Set of connectors
Technical Specifications
Electrical
Supply voltage
24 to 48 VDC
Functions
Power consumption
6W
•
•
Frequency response
30 Hz - 20 kHz
THD at nominal level
< 0.5 %
•
•
•
•
•
•
•
•
Automatic Gain Control
Audio input channels for floor and interpretation
channels
Audio output channels for floor and interpretation
channels (16-bit 44.1 kHz)
Flexible routing of floor and interpretation channels
Configuration of the Digital Audio Expander via a
display and a single rotary push button
Each Digital Audio Expander can be assigned a unique
name by the installer for easy identification
VU meter readings to monitor audio inputs and audio
outputs. The audio can be monitored using
headphones
19” (2U) housing for tabletop or rack mounting
Handgrips for easy transportation
Unit is powered from the network
Controls and Indicators
• 2 x 16 Character LCD display for status display and
configuration of the Audio Expander
• Rotary control to navigate through the LCD menus
www.boschsecurity.com
Mechanical
Mounting
Tabletop or mounted in a 19” rack
Dimensions (H x W x D)
for tabletop use, with feet
92 x 440 x 400 mm
(3.6 x 17.3 x 15.7 in)
for 19” rack use, with brackets
88 x 483 x 400 mm
(3.5 x 19 x 15.7 in)
in front of brackets
40 mm (1.6 in)
behind brackets
360 mm (14.2 in)
Weight
6 kg (13.2 lbs)
Color
Charcoal (PH 10736) with silver
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
114 | DCN Conference Solutions | Central Equipment
1
Ordering Information
PRS‑4DEX4 Audio Expander Digital
contribute audio to and distribute audio from
the system
Bosch Security Systems
PRS-4DEX4
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Central Equipment | 115
LBB 4404/00 CobraNet
Interface
Controls and indicators
• 2 x 16-character LCD display for status display and
audio channel routing of the CobraNet™ Interface
• Rotary control to navigate through the LCD menus
Interconnections
Front
•
One stereo headphone output 3.5 mm (0.14 in)
Back
•
•
•
•
Two optical network connections
Two RJ45 Ethernet connectors for the CobraNet™
Eight control inputs to enable audio inputs and audio
outputs for floor and interpretation channels
Five control outputs to indicate channel engaged state
Certifications and Approvals
Features
▶ Stylish and modern design (IF award)
Region
Certification
Europe
CE
Technical Specifications
▶ Room coupling facility
Electrical
▶ Versatile audio distribution facility
Supply voltage
24 to 48 VDC
▶ CobraNet™ compatible using Ethernet
Power consumption
10.5 W (DC)
▶ Optical network for coupling to the CCU
Frequency response
30 Hz to 20 kHz
▶ Redundant network cabling
THD at nominal level
<0.5%
CobraNetTM
Physical layer
Ethernet
The CobraNet™ Interface can interface audio from the
DCN system to a CobraNet™ network using standard
Ethernet networks. Typical applications are room coupling
and audio distribution over long distances.
Channels
4 in / 4 out per interface
Max 64 on CobraNetTM
Compliance
IEEE 802.3
CobraNetTM is a registered trademark of Peak Audio, a
Division of Cirrus Logic, Inc.
Audio Transport
16 / 20 / 24-bit
Sample Rate
48 kHz
Latency
5.33 ms
Mechanical
Functions
Dimensions (H x W x D)
•
for tabletop use, with feet
92 x 440 x 400 mm
(3.6 x 17.3 x 15.7 in)
for 19” rack use, with
brackets
88 x 483 x 400 mm
(3.5 x 19 x 15.7 in)
•
•
•
•
•
•
•
•
•
Redundant network cabling can be either single
branch or redundant loop
Flexible routing of floor and interpretation channels
Configuration of the CobraNet™ Interface audio
channel routing via a display and a single rotary push
button
Automatic Gain Control
Configuration of the CobraNet™ Interface with
software tools included
Each CobraNet™ Interface can be assigned a unique
name by the installer for easy identification
VU meter readings to monitor audio inputs and audio
outputs. The audio can be monitored using a
headphone
19” (2U) housing for table top or rack mounting
Handgrips for easy transportation
The unit is powered from the network
www.boschsecurity.com
in front of brackets
40 mm (1.6 in)
behind brackets
360 mm (14.2 in)
Weight
7 kg (15.4 lbs)
Mounting
Tabletop, 19”-rack
Color
Charcoal (PH 10736) with silver
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
116 | DCN Conference Solutions | Central Equipment
1
Ordering Information
LBB 4404/00 CobraNet Interface
network protocol for real-time uncompressed
digital audio distribution over industry standard 100Base-T Ethernet networks.
LBB4404/00
DCN‑FCCCU Flight Case
for 2 Central Control Units
Features
▶ Robust construction with reinforced corners
▶ Easy to carry and store
▶ Shaped interior
▶ Holds up to two 19” units
The DCN-FCCCU flight case accommodates two 19” units,
e.g. 1 central control unit (CCU) + 1 transmitter or 1 audio
expander unit.
Technical Specifications
Mechanical
Dimensions (H x W x D)
510 x 460 x 290 mm
(20.1 x 18.1 x 11.4 in)
Weight
6 kg (13.2 lb)
Color
Light grey
Ordering Information
DCN‑FCCCU Flight Case for 2 Central
Control Units
can hold two 19” units (CCU, audio expander, transmitter)
Bosch Security Systems
DCN-FCCCU
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Central Equipment | 117
DCN‑WFCCCU Flight Case
for CCU and WAP
1
Features
▶ Robust construction with reinforced corners
▶ Easy to carry and store
▶ Shaped interior
▶ Holds WCCU, WAP and network cabling
The DCN-WFCCU Flight Case provides a secure
transportation and storage solution for:
•
•
a Wireless Central Control Unit, Wireless Access Point
and optical network cable
2 x Wireless Central Control Units (if dividing foam
partition is removed from case)
Technical Specifications
Mechanical
Dimensions (H x W x D)
480 x 510 x 295 mm
(18.9 x 20.1 x 11.46 in)
Weight
6 kg (13.2 lb)
Color
Light grey
Ordering Information
DCN‑WFCCCU Flight Case for CCU and
WAP
light grey, can hold two central control units,
or one central control unit, wireless access
point and optical cable
www.boschsecurity.com
DCN-WFCCCU
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
118 | DCN Conference Solutions | Central Equipment
1
PRS 1AIP1 IP Audio Interface
The unit provides two balanced line inputs and two
balanced line outputs. One of the inputs can be
configured as balanced microphone input with a phantom
power supply for electret / condenser microphones. The
output level is configurable.
A configurable audio delay can be used to artificially delay
the playback of audio for loudspeaker alignment.
Audio Routing
Audio signals can be routed in uni‑cast to up to 16
receivers, preconfigured or on activation of control inputs.
Receivers are able to re-broadcast the incoming audio
stream to other receivers. In case the interfaces are on
the same LAN also broadcast is supported.
Features
▶ All‑in‑one solution for audio transport on IP‑networks
▶ Supervised control inputs and outputs
▶ Supports re‑broadcasting
▶ Configurable audio delay on the output for
loudspeaker alignment
▶ Easy to install and configure via standard
web‑browser
▶ EN 60849 compliant IP solution
In PCM and G.711 (uLaw and aLaw) full duplex audio
interfacing between two units is possible.
Control inputs and outputs
The unit has eight control inputs. Eight control outputs
have dry relay contacts. Control inputs can be routed to
control outputs for remote actions or to pass on fault
information between audio transmitter and receiver, in
both directions. Control inputs can also be configured to
change the audio routing.
An additional dry relay contact is provided for fault
indication of the unit, including a high temperature fault
situation.
Network Interfaces
The PRS‑1AIP1 is a universal, IP‑based audio device
supporting VoIP and Audio over IP applications. It is an
ideal solution for bridging audio and contact closures over
long distance LAN and WAN networks, e.g. in and between
conference centers and/or in remote interpretation
applications. It extends and interfaces to DCN systems
and non‑network based traditional conference and public
address systems without the need for a PC during
operation.
The unit has analog audio inputs and outputs for easy
interfacing. One audio input can be switched to
microphone sensitivity with built‑in microphone
supervision. Also, the control inputs offer cable and
connection supervision.
Control inputs and outputs can be used to pass channel
engaged events to the DCN system.
Functions
Audio
Multiple audio formats are supported: single channel, full
duplex 16‑bit PCM or G.711 for very low latency, and twochannel send or receive MP3 for high quality audio with
various sample rates and compression settings.
Bosch Security Systems
The unit interfaces to 10 and 100 Mbit Ethernet networks
and announces its IP‑address that was given by a DHCP
server. It can also search the network for a free IP‑address
or can be given a static IP‑address. A second Ethernet
connection is available to support network redundancy.
An RS 232 interface is build‑in to communicate additional
serial data over the IP network.
Power Supplies
Two power supply connections are provided as main input
and backup input with supervision of both supplies.
Controls and Indicators (front)
• Reset button, recessed
• Two status indicator LEDs for network
• Eight status LEDs for control inputs
Interconnections (rear)
• Eight control inputs on Euro‑connector
• Eight control outputs on Euro‑connector
• Fault relay output on Euro‑connector
• Two balanced audio inputs on Euro‑connector (one
line input, one line / microphone input)
• Two balanced audio outputs on Euro‑connector
• Two Ethernet connections on RJ45
• RS 232 on Sub‑D
• RS 485 on Euro‑connector (future use)
• Main power supply on jack
• Backup power supply on Euro‑connector
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Central Equipment | 119
Certifications and Approvals
Safety
acc. to IEC 60065‑98
Immunity
acc. to EN 55103‑2 / EN 50130‑4 /
EN 55024
Emissions
acc. to EN 55103‑1 / EN 55022
Emergency
acc. to EN 60849
Parts Included
Control / fault outputs
8x/1x
Connectors
Removable screw terminals
Operation
Make contact (SPST, voltage free)
Rating
24 V, 0.5 A
Ethernet
Connector
Dual RJ45, DTE-pinout
Standard
802.3i / 802.3u
Speed
10 / 100 Mbps, auto-negotiation
Flow
Full / half-duplex, auto-negotiation
Protocol
TCP/IP, UDP, RTP, IGMP, DHCP,
SNMP
Quantity
Component
1
PRS-1AIP1 IP Audio Interface
1
Power supply
Connector
9‑pin Sub‑D male, DTE‑pinout
1
Set of connectors
Pinout
300 to 115.200 Baud
Setting (default)
9600, 8, N, 1
RS 232
Mechanical
Technical Specifications
Electrical
Dimensions (H x W x D)
216 x 38 x 125 mm( 8.5 x 1.5 x
4.92 in) (half 19” wide)
External power supply 1
18 to 56 VDC
Weight
0.7 kg (1.5 lb)
External power supply 2
18 to 56 VDC
Mounting
Power consumption
8 W max
Stand‑alone or in 19”‑rack with additional frame
Color
Silver with Charcoal
Microphone input
Sensitivity
-48.5 to -26 dBV
Environmental
Impedance
1360 ohm
Operating temperature
-5 ºC to +50 ºC (+23 ºF to +122 ºF)
Frequency response
100 Hz to 15 kHz
Start-up temperature
0 ºC to +50 ºC (+32 ºF to +122 ºF)
S/N
>60 dB
Storage temperature
-20 ºC to +70 ºC (-4 ºF to +158 ºF)
Supervision detection
Electret: 0.4 – 5 mA
Dynamic: 120 – 1300 ohm
Humidity
15 to 90 %
Air pressure
600 to 1100 hPa
Line Inputs
Sensitivity
-16.5 to +6 dBV
Impedance
22 kohm
Frequency response
20 Hz to 15 kHz
S/N
>70 dB
Pilot tone detection level
(input 2 only)
-30 dBV
Ordering Information
PRS‑1AIP1 IP Audio Interface
universal, IP‑based audio device supporting
VoIP and Audio over IP applications.
PRS-1AIP1
Line outputs
Level
6 dBV max
Pilot tone level (output 2 only)
-20 dBV (20 kHz)
Audio formats
MPEG 1-layer 3 (MP3)
32, 44.1 and 48 kHz sample rate
Encoding up to 192 kbps VBR
Decoding up to 320 kbps (stereo)
MPEG 1-layer 2
16, 22.05 and 24 kHz sample rate
G.711
uLaw, aLaw at 8, 24 or 32 kHz sample rate
PCM
16‑bit at 8, 24 or 32 kHz sample
rate
Control inputs
8x
Connectors
Removable screw terminals
Operation
Closing contact (with supervision)
www.boschsecurity.com
Bosch Security Systems
1
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Conference Software Suite | 121
Conference Software
Suite
Available languages
1
Catalan
Chinese (simplified)
Dutch
English
Conference Software Suite (DCN‑SW range*)
French
Bosch is introducing a new, state‑of‑the‑art software suite
for its DCN Next Generation Conference System and
Wireless Discussion System. Remarkably ergonomic, this
software suite makes it simpler than ever to set up and
manage meetings and conferences. Featuring
sophisticated interfacing options, the software has been
created according to the very latest technology standards.
Flexible both in operation and in its range of functionality,
the Bosch DCN Conference Software Suite offers
powerful support and control in a user-friendly package.
As the Conference Software Suite is being introduced in
phases, not all functionality is available at the moment. In
cases when required functionality is missing in the new
Conference Software Suite, the classic PC software will
be an alternative.
Finnish
* Except DCN‑SWSMV which is a dedicated software
application for smaller systems. See next chapter for more
information about the DCN‑SWSMV (Smart Control
Software)
Thai
Software Overview
The DCN software (both suite and classic) is protected
with a license key. The license key depends on the CCU
and the set of software modules. This means that an
individual license key is required per CCU.
The following table provides an overview of the software
modules available for the new Conference Software Suite
and classic software portfolio. Refer to the classic PC
software chapter if required functionality is not yet
available in the new Conference Software Suite.
Suite
Classic
Microphone Management
•
•
Synoptic Control
•
•
System Installation
•
•
Parliamentary Voting
•
•
Delegate Database
•
•
Simultaneous Interpretation
•
•
Attendance Registration
•
•
ID Card Encoding
•
•
Message Distribution
•*
•
Video Display
•
•
Camera Control
•**
•
Multi‑PC
•
•
Multi‑Voting
•
Text/Data Display
•
Intercom
•
German
Hungarian
Italian
Japanese
Korean
Lithuanian
Norwegian
Polish
Portuguese
Russian
Spanish
Swedish
Available languages overview
Activating software
Available functions overview
* Only speak‑slowly and help indicators
** Stand Alone Camera Control software
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
122 | DCN Conference Solutions | Conference Software Suite
1
DCN‑SW Conference Software Main Module
4
3
2
1
5
6
7
8
9
10
Features
▶ Meeting & Agenda
10
1
DCN‑SW Server
2
Vote results print application
10
3
Remote Configuration application
▶ User management
4
Remote Operator application (Multi PC license required)
▶ Client server solution
5
Touch screen
▶ Optimized for Microsoft Windows 7
6
Ethernet connections
▶ Off‑line configuration
7
CCU2 (single)
▶ Multi PC
8
CCU2 (master)
▶ Supports DCN Next Generation or DCN Wireless
Discussion System
9
Bosch optical network
▶ On‑screen help facility
10 CCU2 (slave)
Functions
The DCN‑SW Conference Software Main Module is used
as a platform on which all other software modules run.
Basic functions are included where others can be added
depending on the functionality required.
The server
• Monitor and control of the conference data.
• It runs on the background and links all applications.
• SQL database stores all data and settings.
• Status report of database connection and system
connection.
• Error logging for quick diagnostics.
System Overview
Configuration application
The DCN‑SW Conference Software Main Module is build
as a client server solution and consists of four software
components:
•
The server provides management, control and
monitoring of the DCN Next Generation System or
DCN Wireless Discussion system.
• The configuration application provides system
installation and meeting preparation.
• The operator application provides system monitoring
and meeting control.
• The print application provides printing of voting
results.
All DCN‑SW applications can, but not necessary need to
be run on separate computers and integrate seamlessly
with each other. This allows the possibility for assigning
functionality to different users and/or PCs – for instance,
let one or more users configure the set‑up and register
delegates (configuration application), and another person
actually control the meeting on a separate pc (operator
application). Contextual help file provides instant support
for all applications.
Bosch Security Systems
•
•
•
Easy step‑by‑step pre‑configuration which makes it
exceptionally ergonomic.
Off‑line system configuration.
Administrator user management: defining users and
user groups with group privileges like view‑ and
control rights.
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Conference Software Suite | 123
•
•
Installer system setup: defining seats and synoptic
layouts.
Operator meeting preparation: voting templates,
participating delegates, authorizations for each
meeting, the agenda, lists of speakers and voting
scripts.
Operator application
Parts Included
1
Quantity Component
1
DVD includes:
DCN‑SW Conference Software Main module
Authorization code including synoptic control
Setup wizard that can selectively install all components (Server‑, Configuration‑, Operator‑ and Print‑ application) in all
supported languages
Technical Specifications
•
•
•
•
•
•
•
Maximum number of client PCs
20
Supported operating system
Windows 7 Home Premium (32 and
64 bits) or above
or
Windows Vista Home Premium(32 or
64 bits) or above
All with the latest service packs and
updates.
Required open TCP port for client
PCs
9461
PC requirements
Full meeting control.
Touch screen optimized.
Ribbon technology giving the user a graphical
representation of all main functions, which makes it
very intuitive to use.
Functionality depending on user rights and system
license.
Synoptic microphone control, voting results, Individual
microphone sensitivity control, battery status and
signal status.
Ergonomically designed synoptic shapes and shadings
help the color‑impaired people to distinguish different
statuses.
Quick‑links to jump instantaneously to configuration
application to make adjustment to the
pre‑configuration.
Print application
• Automatic printing of voting results
Installation/Configuration Notes
License
DCN‑SW is license activated and comes which an
authorization code which includes synoptic control with
basic microphone control functionality. Activation is done
via the license website.
Single CCU
Dual core processor (2.66 GHz) and
2 GBytes internal memory for single
PC systems and for the server PC in
multi PC systems.
Dual core processor (2.66 GHz) and
1 GBytes internal memory for client
PC’s in multi PC systems.
Multi CCU
Quad core processor (2.40 GHz)
and 2 GBytes internal memory for
single PC systems and for the server
PC in multi PC systems.
Dual core processor (2.66 GHz) and
1 GBytes internal memory for client
PC’s in multi PC systems.
Ordering Information
DCN‑SW Conference Software Main
Module
a platform on which all other Conference
software modules run
DCN-SW
Software Options
DCN‑SW‑E Conference Software Main
Module E‑code
Electronic authorization code. Only valid for
the EMEA region.
DCN-SW-E
The configuration application can be used independent of
the additional licenses as where the operator application
does need the license to control the conference system.
Running the operator application on a separate PC
requires DCN‑SWMPC.
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
124 | DCN Conference Solutions | Conference Software Suite
1
DCN‑SWMM Conference
Software Microphone
Management
Preperation
The operator prepares how the discussion will take place
using the configuration application. Microphone settings
can be defined for every entry in the meeting agenda.
Settings available are: microphone mode, number of
active microphones, request‑to‑speak list, individual and
group speech timers and many more.
During the actual meeting the operator can choose to run
the set‑up as pre‑configured, or make adjustments in
real‑time.
Microphone Management
Microphone Management offers a number of microphone
control options. This has a bearing on both how the
Microphone Management module operates and how the
conference itself proceeds. These options are:
•
Features
▶ Prepare request‑to‑speak lists
▶ Group and individual speech timers
▶ Notebook
DCN‑SWMM Conference Software Microphone
Management is the way to efficient control microphones
in a conference and provides the user a powerful and
easy‑to‑use tool that covers all aspects of microphone
management.
Functions
Control by operator with request‑to‑speak list
(manual).
• Control by operator with request‑to‑speak list and
response list.
• Control by delegate with request‑to‑speak list (open).
• Control by delegate with override of other delegate
microphones (first‑in, first‑out).
• Control by delegate with voice activation.
• Control by delegate with Push‑To‑Talk.
Each mode allows a different level of both operator and
delegate microphone control, so all general conferences
can be covered. For example, smaller, informal
discussions require very little operator microphone
control, so a mode such as microphone control by
delegate would be ideal. For a full‑scale international
conference with hundreds of participants, control by
operator with request‑to‑speak list would be more
appropriate. The operator can specify whether one, two,
three or four normal delegate microphones can be active
simultaneously. It is also possible to specify whether
delegates are allowed to cancel requests‑to‑speak or
switch their microphones off. The amount of time
delegates are allowed to speak can be defined for the
current speaker, response speaker, individual delegates
and for delegate groups.
Notebook
It is also possible to give delegates additional microphone
activation privileges, which means they do not have to join
the request list and can enjoy certain other privileges not
granted to other delegates. The microphone type must be
specified for the notebook. The possibilities are:
•
•
Function screenshot
Bosch Security Systems
‘Chair’ for chairman microphones.
‘Button’ where delegates activate their microphones
by pressing their microphone button (in this mode the
‘VIP’LED of the contribution units is illuminated).
• ‘Operator’ where the microphones of more active
delegates are activated by the operator.
• ‘Voice’ where the microphones are voice activated.
• ‘PTT’ where microphones are activated by using
Push‑To‑Talk.
Both DCN Next Generation and DCN Wireless systems
automatically recognize an assigned chairman unit and
will automatically add it to the notebook.
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Conference Software Suite | 125
Parts Included
1
Quantity
Component
1
Authorization code
Ordering Information
DCN‑SWMM Conference Software
Microphone Management
can only be used in combination with
DCN‑SW
DCN-SWMM
Software Options
DCN‑SWMM‑E Conference Software
Microphone Management E‑code
Electronic authorization code. Only valid for
the EMEA region.
www.boschsecurity.com
DCN-SWMM-E
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
126 | DCN Conference Solutions | Conference Software Suite
1
DCN‑SWPV Conference
Software Parliamentary
Voting
Applications
The software covers a number of functions including vote
preparation, specifying vote-related parameters, and
starting and controlling voting.
In the configuration application voting is prepared as in
the operator application the voting can be started and
results can be shown.
Voting
Voting is an optional part of every agenda entry. Voting
can consist of a number of proposals or motions, each of
which will be voted on.
The preparation of the voting is done in two steps. First a
template needs to be defined. The template contains
more general settings like automatic print, secret, majority
and many more. Secondly a single vote can be created.
Now the number, name subject, template and answer set
must be defined. Also a link to a document can be defined
which can be activated from the operator application. This
document can be used as extra information for a specific
vote.
Features
▶ Complete operator control of parliamentary voting
sessions
▶ Extensive motion preparation facilities
▶ Output voting results to printers
▶ Wide range of vote‑related parameter options
The DCN‑SWPV Conference Software Parliamentary Voting
is a software module designed to control and to prepare
parliamentary voting.
Voting template
Functions
Operator
The operator selects the desired vote from the prepared
voting list and starts the vote; participants can use their
units to register votes. The operator has full control over
the voting procedure, and can stop or suspend a vote at
any time. It is also possible to start a vote which is not
prepared before (ad‑hoc voting).
Display
The software program offers the possibility of displaying
cast answers and the final result of a vote on the PCs
screens. Optional delegate units with a display facility can
display the vote results. There is also a facility of
automatically print‑out the vote results once the vote is
completed.
Vote preparation
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Conference Software Suite | 127
Parts Included
1
Quantity
Component
1
Authorization code
Ordering Information
DCN‑SWPV Conference Software
Parliamentary Voting
can only be used in combination with
DCN‑SW. DCN‑SWDB is required if individual
vote results are required.
DCN-SWPV
Software Options
DCN‑SWPV‑E Conference Software
Parliamentary Voting E‑code
Electronic authorization code. Only valid for
the EMEA region.
www.boschsecurity.com
DCN-SWPV-E
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
128 | DCN Conference Solutions | Conference Software Suite
1
DCN‑SWDB Conference
Software Delegate Database
Data Input
All delegate information is input via the configuration
application. For some entries (first name, last name) the
only restriction is the number of characters entered. For
other entries (country, group, etcetera.), the input can
easily be selected from a list of options that is presented
by the system. This option list is automatically controlled
by the system. When the user enters a text it is
automatically added to the list.
User rights
By defining the correct user rights a delegate information
entry PC client can be created. This entry client can be
placed at the lobby of a conference hall entrance, where
the registration officer can enter delegate information and
assigning the delegate to the desired meeting.
Parts Included
Features
▶ Comprehensive database information for all delegates
▶ Re‑use of delegate information across meetings
▶ Define vote and microphone authorization for each
individual participant
The DCN‑SWDB Conference Software Delegate Database
allows users to compile a comprehensive database of
information relating to delegates. During the meeting
preparation stage the delegates can be assigned to the
meeting as participants. The advantage of this method is
that delegates participating in multiple meetings only
need to be entered once and can be assigned to any
desired meeting without re‑entering the same delegate
information again.
Quantity
Component
1
Authorization code
Ordering Information
DCN‑SWDB Conference Software Delegate
Database
can only be used in combination with
DCN‑SW
DCN-SWDB
Software Options
DCN‑SWDB‑E Conference Software
Delegate Database E-code
Electronic authorization code. Only valid for
the EMEA region.
DCN-SWDB-E
Functions
Database
All information is entered via the configuration
application, before or during conference proceedings. A
considerable amount of data can be specified for each
conference participant. All delegate specific information
like: delegate name, delegate country, delegate group and
delegate unit display language, can be re-used and does
not need to be re‑entered for every meeting.
At meeting preparation it is possible to grant or deny
authorization to individual delegates in a specific meeting
for microphone, and voting use; also the voting weight can
be defined.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Conference Software Suite | 129
DCN‑SWSI Conference
Software Simultaneous
Interpretation
Operator application
The operator can view the status of the interpretation in
two ways. One is the Interpretation Distribution status
list. This list is an overview of all interpretation languages,
and contains the following: channel number, translating
booth and desk number, and channel quality.
Operators may also use the synoptic layout, which
features interpreter desk and booth icons. The operator
may control the microphone and microphone sensitivity of
interpreter desks via the synoptic layout.
Ordering Information
DCN‑SWSI Conference Software
Simultaneous Interpretation
Can only be used in combination with
DCN‑SW. Supports the preparation of simultaneous interpretation facilities and the monitoring of interpreter activities during a conference.
DCN-SWSI
Features
▶ Operator control of interpreter microphones
▶ Configure and control interpretation facilities
▶ Monitor interpreter activities
▶ Adjust individual microphone sensitivity of
interpreter desks
The DCN‑SWSI Simultaneous Interpretation software
module is essential for international conference venues.
The simultaneous interpretation software module is used
to prepare simultaneous interpretation, control facilities
and monitor interpreter activities during a conference. It
accommodates 31 interpreter booths, each with up to 6
interpreter desks.
Functions
Configuration application
In the configuration application, the operator defines the
maximum number of system channels to be used for
interpretation.
The operator can prepare the interpretation settings for
each meeting. These settings consist of the following:
number of interpretations, language channel names,
interpreter microphone interlock mode, enabling /
disabling of speak slowly, and floor distribution.
Icons representing the interpreter desk and the booths
can be placed on the synoptic layout for controlling and
status information.
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
130 | DCN Conference Solutions | Conference Software Suite
1
DCN‑SWMD Conference
Software Message Distribution
After the delegate or interpreter has been served, the
usher marks the help request as finished.
Note
The functions Speak-slowly request and Helprequest are only working in combination with
DCN-SWSI.
Ordering Information
DCN‑SWMD Conference Software
Message Distribution
Can only be used in combination with
DCN‑SW. Speak‑slowly and help request also
requires DCN-SWSI.
DCN-SWMD
Features
▶ Speak‑slowly request
▶ Help request of delegates and interpreters
The Message Distribution module indicates to the
operator or chairman that an interpreter has requested
the floor to speak slowly, and also indicates to the usher
that a delegate or interpreter is requesting help.
The speak slowly and help request are shown on the
operator application.
Functions
Speak‑slowly request
If the floor is speaking too fast during a meeting, an
interpreter issues a speak‑slowly request. This request is
shown on the operator application used by an operator or
chairman.
After receiving the request, the chairman can instruct the
floor to speak more slowly. For privacy reasons, it is not
possible to see which interpreter issued the request.
Help request
If a delegate or interpreter needs help during a meeting, a
help request can be issued. The usher can see which
interpreter needs help via the synoptic layout of the
operator application. The usher then marks the request as
being handled.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Conference Software Suite | 131
DCN‑SWID Conference
Software ID Card
Encoding
Ordering Information
DCN‑SWDB‑E Conference Software
Delegate Database E-code
Electronic authorization code. Only valid for
the EMEA region.
DCN-SWDB-E
The ID‑card Encoding module is used for encoding
ID‑cards. ID‑cards are used to identify delegates during a
meeting. The ID‑card Encoder (USB) (DCN‑IDENC) and
DCN‑SW Conference Software Main module are required
to produce ID‑cards.
Ordering Information
DCN‑SWID Conference Software ID Card
Encoding
software module for producing ID cards. Can
only be used in combination with
DCN‑IDENC, DCN‑SW and DCN‑SWDB. Can
not be used with the DCN Wireless Discussion System (DCN‑WCCU).
DCN-SWID
DCN‑SWID‑E Conference Software ID Card
Encoding E‑code
Electronic authorization code. Only valid for
the EMEA region.
DCN‑SWID-E
DCN‑IDENC ID Card Encoder (USB)
used in combination with the ID Card Encoder (DCN‑SWID), DCN‑SW and DCN‑SWDB
software modules
DCN-IDENC
DCN‑SW Conference Software Main
Module
a platform on which all other Conference
software modules run
DCN-SW
DCN‑SW‑E Conference Software Main
Module E‑code
Electronic authorization code. Only valid for
the EMEA region.
DCN-SW-E
DCN‑SWDB Conference Software Delegate
Database
can only be used in combination with
DCN‑SW
DCN-SWDB
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
132 | DCN Conference Solutions | Conference Software Suite
1
DCN‑IDENC ID Card
Encoder (USB)
Environmental
Operating temperature
0 ° to +50 °C (+32 ºF to +122 ºF)
Storage temperature
-20 ° to +60 °C (-4 ºF to +140 ºF)
Relative humidity
15% to 90%
Ordering Information
DCN‑IDENC ID Card Encoder (USB)
used in combination with the ID Card Encoder (DCN‑SWID), DCN‑SW and DCN‑SWDB
software modules
DCN-IDENC
DCN‑SWID Conference Software ID Card
Encoding
software module for producing ID cards. Can
only be used in combination with
DCN‑IDENC, DCN‑SW and DCN‑SWDB. Can
not be used with the DCN Wireless Discussion System (DCN‑WCCU).
DCN-SWID
DCN‑SW Conference Software Main
Module
a platform on which all other Conference
software modules run
DCN-SW
DCN‑SW‑E Conference Software Main
Module E‑code
Electronic authorization code. Only valid for
the EMEA region.
DCN-SW-E
▶ Supported by DCN‑SW and LBB 4190/00
DCN‑SWDB Conference Software Delegate
Database
can only be used in combination with
DCN‑SW
DCN-SWDB
The ID Card Encoder (USB) is used to encode ID cards
(DCN-IDCRD). It is used in combination with the following
Conference software modules: ID Card Encoder
(DCN‑SWID), Delegate Database (DCN‑SWDB) and
Conference Software Main module (DCN‑SW).
DCN‑SWDB‑E Conference Software
Delegate Database E-code
Electronic authorization code. Only valid for
the EMEA region.
DCN-SWDB-E
Features
▶ USB (2.0) supported
▶ ID card supported (DCN‑IDCRD)
The DCN‑IDENC can also be used with the LBB 4181/00
from software version 2.80 onwards.
Accessories
DCN‑IDCRD ID Card (100 pcs)
standard credit-card format, set of 100
DCN-IDCRD
Certifications and Approvals
FCC part 15 Class B, UL, CE, VCCI
EMV 2000 Level 1
Technical Specifications
Electrical
Power supply
Through USB bus
Indication on top of unit
One dual state green LED
Operating System
XP, Server2003, Vista
ID card supported
DCN‑IDCRD
Mechanical
Cable
1.5 m long with USB type A connector
Dimensions (H x W x D)
10 x 70 x 70 mm (0.39 x 2.8 x 2.8 in)
Weight
60 g (0.13 lb)
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Conference Software Suite | 133
DCN‑IDCRD ID Card
(100 pcs)
1
Features
▶ Attractive design
▶ Ample space for a name or other delegate personal
information
▶ Clear instructions showing how to insert the card into
a reader
These standard credit-card format ID cards are used by
delegates to identify them to the DCN Next Generation
system. This can be a pre-requisite for access to
contribution units and activities such as attendance
registration and voting.
Technical Specifications
Mechanical
Dimensions (H x W)
85 x 54 mm (3.3 x 2.1 in)
Ordering Information
DCN‑IDCRD ID Card (100 pcs)
standard credit-card format, set of 100
www.boschsecurity.com
DCN-IDCRD
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
134 | DCN Conference Solutions | Conference Software Suite
1
DCN‑SWAT Conference
Software Attendance &
Access
Access Control:
The settings specified for Attendance Registration can be
used for access control. This means that although
delegates can enter the meeting, they cannot use any of
the conference unit’s facilities (such as microphone and
voting) without access requirements. Access is controlled
by means of ID‑ cards, with or without PIN‑code (free
seating). There is an option whereby delegates register
attendance at the entrance using an ID‑card reader, and a
specific conference unit is than made available for them
(fixed seating).
Access control can be done on the conference unit only by
ID‑card with or without PIN‑code or PIN‑code only (fixed
seating).
Ordering Information
Features
▶ Attendance Registration using ID‑card with or without
PIN‑code, or present button
▶ Access Control using ID‑card with or without PINcode or PIN‑code only
▶ All data instantly available to operator
▶ Print function to reproduce data
The Attendance Registration & Access Control software
module is used to register attendance of delegates in a
conference meeting, and to control access to the
conference facilities in the conference room.
Functions
The functionality of Attendance Registration & Access
Control software falls into two categories:
DCN‑SWAT Conference Software
Attendance & Access
used for registering and accessing facilities in
the conference room. Can only be used in
combination with DCN‑SW and DCN‑SWDB
software modules. Can not be used with the
DCN Wireless Discussion System
(DCN‑WCCU).
DCN-SWAT
DCN‑SWAT‑E Conference Software
Attendance & Access E‑code
Electronic authorization code. Only valid for
the EMEA region.
DCN‑SWAT-E
DCN‑SW Conference Software Main
Module
a platform on which all other Conference
software modules run
DCN-SW
DCN‑SW‑E Conference Software Main
Module E‑code
Electronic authorization code. Only valid for
the EMEA region.
DCN-SW-E
DCN‑SWDB Conference Software Delegate
Database
can only be used in combination with
DCN‑SW
DCN-SWDB
DCN‑SWDB‑E Conference Software
Delegate Database E-code
Electronic authorization code. Only valid for
the EMEA region.
DCN-SWDB-E
Attendance Registration:
It is possible to specify entrance requirements that
delegates have to meet before entering the meeting. This
normally means delegates have to insert an ID‑card in a
card reader, either at the entrance to the meeting or at
the conference unit. Registration at a conference unit can
also be done by pressing the ‘Present’ button.
It is possible to display lists on-screen of all ‘present’ and
‘absent’ delegates, and print hard copies.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Conference Software Suite | 135
DCN‑SWSMD Conference
Software Streaming
Meeting Data
The content of each stream can be freely defined so that
each PC software Client receives only the required
meeting data.
The streams are protected meaning that only authorized
PC software clients can receive the streams.
Functions
A great diversity of activities can be streamed. The main
items are:
• Start/Stop meeting, speakers list, request list, vote
results both Individual and totals, participating
delegates.
• Filters are available to define the content of a stream;
e.g. if only voting activity is required in the stream all
other information can be filtered out.
• Activities are queued before they are sent to the
stream. The size of the queues are free definable.
• Client authorization is controlled by a list of allowed
IP addresses. Clients with unknown IP addresses will
not be able to receive the stream.
• Example C‑Sharp source code and software developer
manual available on DCN‑SW DVD
Features
▶ XML streams for easy processing and logging
Ordering Information
DCN‑SWSMD Conference Software
Streaming Meeting Data
To be used as an interface to provide meeting
data such as current speakers, request list,
vote results and other information to video
screens or video projectors. Can only be used
in combination with DCN‑SW Conference
Software main module.
DCN-SWSMD
▶ Software developer manual available
DCN‑SWSMD‑E Conference Software
Streaming Meeting Data E‑code
Electronic authorization code. Only valid for
the EMEA region.
DCN-SWSMD-E
Conference Software Streaming Meeting Data is an
interface to provide meeting data such as current
speakers, request lists, vote results and other information
to video screens or video projectors.
DCN‑SW Conference Software Main
Module
a platform on which all other Conference
software modules run
DCN-SW
DCN‑SW‑E Conference Software Main
Module E‑code
Electronic authorization code. Only valid for
the EMEA region.
DCN-SW-E
▶ Interface to video client applications to display
meeting data by using video screens or video
projectors
▶ Video client application available on DCN‑SW DVD
▶ Example C‑Sharp source code available on DCN‑SW
DVD
System Overview
Conference Software Streaming Meeting Data unlike other
Conference Software modules does not require any user
interaction of an operator; it consists of a software
interface from the Conference Software Server to any
number of client applications.
The interface consists of streams containing meeting data
in XML format. Every time an activity (e.g. microphone on/
off, start/stop vote) takes place data is send over the XML
stream.
The stream can be picked up by a video client application
which is connected to a video screen or a video projector
to display the meeting data.
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
136 | DCN Conference Solutions | Conference Software Suite
1
DCN‑SWAPI Conference
Software API
•
•
•
•
API
•
•
Update delegate information
Encode ID‑card for a delegate (in combination with
DCN‑SWID)
Assign or remove delegates as participant to or from a
prepared or active meeting. This implies per
participants:
- Assignment to the meeting
- Assignment to a seat
Add or remove votes to/from a voting script of a
prepared or active meeting. This implies per voting:
- Assignment to voting script
- Definition of voting template to use
- Definition of voting answer set to use
- Definition of voting 100% setting
Update voting information in a voting script of a
prepared or active meeting
Example C‑Sharp source code and extensive software
developer manual available on DCN‑SW DVD
Ordering Information
Features
▶ Exchange and synchronize delegate and participants
information with 3rd party systems
▶ Import of vote scripts
▶ Encoding ID cards solution for 3rd party systems
▶ Example C‑Sharp source code available
▶ Extensive software developer manual available
DCN‑SWAPI is deployed as Microsoft.Net components to
be used by 3rd party applications to modify, add, remove
and update a subset of the DCN‑SW configuration data.
DCN‑SWAPI Conference Software API
to be used by 3rd party applications to modify, add, remove and update a subset of the
DCN‑SW configuration data. Can only be
used in combination with DCN‑SW Conference Software module. Can not be used with
the DCN Wireless Discussion System
(DCN‑WCCU).
DCN-SWAPI
DCN‑SWAPI‑E Conference Software API
E‑code
Electronic authorization code. Only valid for
the EMEA region.
DCN‑SWAPI-E
DCN‑SW Conference Software Main
Module
a platform on which all other Conference
software modules run
DCN-SW
DCN‑SW‑E Conference Software Main
Module E‑code
Electronic authorization code. Only valid for
the EMEA region.
DCN-SW-E
System Overview
A 3rd party application will be connected to the DCN‑SW
Conference Software server as a client in the same way as
the DCN‑SW Configuration Application does.
All changes applied through the DCN‑SWAPI affect the
meeting- configuration and currently active meeting
immediately.
All changes applied to the configuration data of a
currently active meeting, will be actualized immediately to
the operational state of the system.
Functions
•
Add or remove delegates to the system. This implies
per delegate:
- Definition of title, first, middle and last name
- ID‑card assignment
- Assignment to a group (e.g. political party)
- Language assignment
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Conference Software Suite | 137
DCN‑SWMPC Conference
Software Multi PC
1
Features
▶ Remote operator application
The DCN‑SWMPC Conference Software Multi PC Module
is needed when more than one PC is required to operate
a meeting running on a DCN Next Generation or DCN
Wireless system.
Functions
General
The DCN‑SWMPC Conference Software Multi PC Module
enables the use of multi operator applications running on
multi PCs in a network.
Running configuration application on multi PCs does not
require this module.
Parts Included
Quantity
Component
1
Authorization code
Ordering Information
DCN‑SWMPC Conference Software Multi
PC
can only be used in combination with
DCN‑SW
DCN-SWMPC
Software Options
DCN‑SWMPC‑E Conference Software Multi
PC E‑code
Electronic authorization code. Only valid for
the EMEA region.
www.boschsecurity.com
DCN‑SWMPC-E
Bosch Security Systems
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Smart Control Software | 139
Smart Control Software
1
Smart Control Software
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
140 | DCN Conference Solutions | Smart Control Software
1
DCN‑SWSMV Synoptic
Microphone and Voting
Software
User interface
The user interface is based on a graphical representation
of the conference venue. When a device is connected to
the system it is automatically recognized and an icon is
created for it on the on-screen room layout. The icons
display information about device status and can be used
by the operator to select individual devices for remote
control functions. If a device becomes disconnected from
the system, a red cross is displayed on top of its icon to
alert the operator.
Operating modes
The Synoptic Microphone and Voting Software can
operate in the following modes, depending on the
required task:
•
•
•
Assignment mode allows you to assign names to
microphone icons. The positions of the icons on the
room layout can also be changed using the standard
windows ‘drag & drop’.
Microphone control mode allows you to observe and
control the state of each individual microphone.
Microphones can be switched on and off, or placed in
the ‘request to speak’ queue.
Battery and signal view mode shows the remaining
battery charge time and the signal strength for each
wireless discussion unit
Voting result mode shows individual results in
different colors according to votes cast
Features
•
▶ Synoptic room overview for monitoring and
controlling the microphones
Note
▶ Voting control with individual results
▶ Real-time voting results displayed in Microsoft
PowerPoint®
▶ On-screen help in many languages
The DCN-SWSMV Synoptic Microphone and Voting
Software provides a range of conference facilities when
used in combination with a DCN Wireless or DCN Next
Generation system. The available functions include
automatic seat assignment, synoptic microphone
monitoring and control, and voting management.
The different symbols in the various modes
are specially designed so that they are also
easily identified by persons with the visual
disability of color blindness.
Parliamentary and real-time voting
The application provides parliamentary voting
functionality. The system operator can summon delegates
to vote, as well as starting and stopping voting sessions.
Final vote results can be automatically printed or exported
to a file; the software can also be configured to send realtime voting information to Microsoft PowerPoint® for
display.
Functions
Ease of use
Although it offers many powerful features, the software is
extremely easy to use thanks to its innovative design. The
application moves away from traditional control panels
and buttons and replaces them with a highly intuitive
graphic user interface. All functions are controlled from a
single window making the software suitable for touch
screen operation. The software features on-screen help in
most major languages.
Real-time voting results in Microsoft PowerPoint®
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Smart Control Software | 141
Installation/Configuration Notes
1
Used in combination with a DCN Wireless or DCN Next
Generation system.
Technical Specifications
Supported operating system
Windows 7 Home Premium (32 and
64 bits) or above
or
Windows Vista Home Premium(32 or
64 bits) or above
All with the latest service packs and
updates.
Ordering Information
DCN‑SWSMV Synoptic Microphone and
Voting Software
include automatic seat assignment, synoptic
microphone monitoring and control, and voting management
DCN-SWSMV
Software Options
DCN‑SWSMV‑E Synoptic Microphone and
Voting Software E‑code
Electronic authorization code. Only valid for
the EMEA region.
www.boschsecurity.com
DCN‑SWSMV-E
Bosch Security Systems
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Meeting Recorder Software | 143
Meeting Recorder Software
1
Meeting Recorder Software.
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
144 | DCN Conference Solutions | Meeting Recorder Software
1
DCN‑MR Meeting
Recorder
microphone numbers. Additional conference information,
such as the agenda or meeting minutes can also included
in the audio file.
² Open interface LBB 4187/00 or streaming meeting data
DCN‑SWSMD additional required
Playback
Recorded files can be played back for listening or
transcribing. While the audio file is played the name of the
speaker (if available) and time‑information can be
displayed in a window of the text editor. In case two
audio sources are recorded, they are recorded as one
stereo file. When the balance slider is in the far left
position (or right), only the left (or right) channel is heard
during playback. When the balance slider is in middle
position both audio channels are heard (stereo) making
this product ideal for interpreter training applications.
Transcription
Features
▶ Recording in PCM/WAV, WMA or MP3 audio format
Although transcription is possible through the Meeting
Recorder, the optional DCN Transcription Module (DCNMRT) is especially suited for it. The DCN‑MRT is in fact the
same software as the DCN‑MR but without the recording
function.
▶ Ability to attach speaker names in the audio file
For easy control during transcription; start, stop,
fast‑forward/rewind, an optional transcription foot pedal
is available (DCN‑MRFP).
▶ Network sharing of audio files
Ease of use
▶ Stereo track can be used for bilingual recording
The Meeting Recorder can be used in combination with
CCS 900, DCN Next Generation or DCN Wireless systems.
The DCN‑MR Meeting Recorder software is designed for
recording and playback purposes during a meeting or
conference.
Recording is done on the hard drive of a computer in
PCM/WAV, WMA or MP3 format.
Functions
Recording
The Meeting Recorder can record two analog audio
channels. In most cases one audio channel is sufficient to
record the floor language. However, in some (bilingual)
applications it is ideal to record two channels
simultaneously.
Attach speaker names
The name of the current speaker can be attached in the
audio file, during or after the meeting. This can be done
manually or automatically. Manually by simply double
clicking on the delegates name in list. Automatically when
the DCN‑MR is coupled with the DCN Central Control
Unit². For automatic attaching of the speaker names, the
delegate names must be assigned to the corresponding
Bosch Security Systems
Although it offers many powerful features, the software is
easy to use. The intuitive graphic user interface is divided
into recording, playback, visualization and files sections.
Installation/Configuration Notes
Installation
The DCN‑MR Meeting Recorder software is supplied on
DVD and can be installed on one or more computers.
The software is designed to be used on a computer
network. This gives the possibility, for example, to install
a Meeting Recorder next to the DCN CCU, while storage
of the files is done in parallel on a server via the computer
network. Persons responsible for transcription can have
access from their computer via the network to the files on
the server.
Licence
Licensing of the Meeting Recorder is done with USB
dongle. The Meeting Recorder software can be installed
on more computers. As soon the USB dongle is
plugged‑in, the software is ready to use with the
applicable licenses. This makes it very flexible, with a
minimum of effort and cost.
For demonstration purposes, the DCN‑MR software can
be used to make or play recordings of five minutes
maximum without the dongle.
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Meeting Recorder Software | 145
Parts Included
1
Quantity
Component
1
DCN‑MR Meeting Recorder software on DVD
1
USB dongle (blue)
1
Audio connection cable
Technical Specifications
Recording formats
(max. sample rate)
WMA (128 kbps)
PCM / WAV (48 kHz)
MP3 (256 kbps)
System platform
Windows 7 Home Premium (32 and 64 bits) or
above
or
Windows Vista Home Premium(32 or 64 bits) or
above
Ordering Information
DCN‑MR Meeting Recorder
used with the DCN‑MR or DCN‑MRT
DCN-MR
Accessories
DCN‑MRT Transcription Module
used with DCN‑MR or CCS‑CURD
DCN-MRT
DCN‑MRFP Transcription Foot Pedal
used with the DCN‑MR or DCN‑MRT
DCN-MRFP
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
146 | DCN Conference Solutions | Meeting Recorder Software
1
DCN‑MRT Transcription
Module
position (or right), only the left (or right) channel is heard
during playback. When the balance slider is in middle
position both audio channels are heard (stereo) making
this product ideal for interpreter training applications.
Extracting
Parts of recorded files can be easily extracted and
optionally exported. In case the names of the speakers are
available in the recording, easy retrieval of parts of a
specific speaker are possible.
Ease of use
Although it offers many powerful features, the software is
easy to use. The intuitive graphic user interface is divided
into playback, visualization and files sections.
Installation/Configuration Notes
Installation
The DCN‑MRT Transcription Module software is supplied
on USB dongle and can be installed on one or more
computers.
Features
▶ Transcription of Meeting Recorder and CCS 900 files
▶ Can play PCM/WAV, WMA or MP3 audio formats
▶ Network sharing of audio files
▶ Easy copying or extracting (parts) of audio files
The software is designed to be used on a computer
network. This gives the possibility, for example, to install
a Transcription Module next to the DCN Central Control
Unit, while storage of the files is done in parallel on a
server via the computer network. Persons responsible for
transcription can have access from their computer via the
network to the files on the server.
Licence
The DCN‑MRT can play PCM/WAV, WMA or MP3 formatted
files.
Licensing of the Transcription Module is done with USB
dongle. The Transcription Module software can be
installed on more computers. As soon the USB dongle is
plugged-in, the software is ready to use with the
applicable licenses. This makes it very flexible, with a
minimum of effort and cost.
Functions
For demonstration purposes, the DCN‑MRT software can
be used to play recordings of five minutes maximum
without the dongle.
The DCN‑MRT Transcription Module software is designed
for playback and transcription of Meeting Recorder or
CCS 900 recordings.
Transcription
The DCN‑MRT transcription module is especially suited for
playback and transcription of Meeting Recorder or
CCS 900¹ recordings. The DCN‑MRT is in fact the same
software as the DCN‑MR but without the recording
function.
Parts Included
Quantity
Component
1
DCN‑MRT Transcription Module
For easy control during transcription; start, stop,
fast‑forward/rewind, an optional transcription foot pedal
is available (DCN‑MRFP).
1
USB dongle (yellow)
¹ CCS 900 recordings from CCS‑CURD
Technical Specifications
Playback
System platform
Recorded files can be played back for listening or
transcribing. While the audio file is played the name of the
speaker (if available) and time‑information can be
displayed in a window of the text editor. The DCN‑MR
Meeting Recorder can record two audio channels as
stereo file. When the balance slider is in the far left
Bosch Security Systems
Windows 7 Home Premium (32 and 64 bits) or
above
or
Windows Vista Home Premium(32 or 64 bits) or
above
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Meeting Recorder Software | 147
Ordering Information
DCN‑MRT Transcription Module
used with DCN‑MR or CCS‑CURD
1
DCN-MRT
Accessories
DCN‑MRFP Transcription Foot Pedal
used with the DCN‑MR or DCN‑MRT
www.boschsecurity.com
DCN-MRFP
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
148 | DCN Conference Solutions | Meeting Recorder Software
1
DCN‑MRFP Transcription
Foot Pedal
Installation/Configuration Notes
Connection
The DCN‑MRFP Transcription Foot Pedal is connected via
USB.
Parts Included
Quantity
Component
1
DCN‑MRFP Transcription Foot Pedal
Ordering Information
DCN‑MRFP Transcription Foot Pedal
used with the DCN‑MR or DCN‑MRT
DCN-MRFP
Features
▶ Hands‑free control
▶ User‑programmable pedals
▶ Rugged and reliable construction
▶ USB connection
▶ Pedal pressing security
The DCN‑MRFP Transcription Foot Pedal is used for easy
control of start, stop, fast‑forward and rewind during
transcription of audio recordings.
The Transcription Foot Pedal is connected via the USB
port of the computer and is configured for the DCN
Meeting Recorder or DCN Transcription Module software
(DCN‑MR or DCN‑MRT).
Functions
Controls
For easy control during transcription; start, stop,
fast‑forward/rewind; three foot pedals are provided which
are configured in the Meeting Recorder or Transcription
Module software. The pedals are mechanically secured
against accidentally depressing more than one pedal.
Certifications and Approvals
Region
Certification
Europe
CE
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Various software applications | 149
Various software applications
1
Various software applications.
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
150 | DCN Conference Solutions | Various software applications
1
DCN‑SWIND Individual
Channels
Recorder trigger
The digital output contact of the connected Audio
Expander or Cobranet Interface becomes automatically
active as soon as the presence of the individual channel
signal has been recognized. The output contact is
threshold configurable in the Audio Expander and
Cobranet Interface.
Ordering Information
1
2
3
4
1 2 3 4
DCN‑SWIND Individual Channels
Routes an individual delegate microphone audio signal to an audio channel of the DCN system. Can not be used with the DCN Wireless
Discussion units and DCN‑DDI/DCN‑DIS in
dual mode.
DCN-SWIND
DCN‑SWIND‑E Individual Channels E‑code
Electronic authorization code. Only valid for
the EMEA region.
DCN‑SWIND-E
Features
▶ Easy routing of individual audio channels
▶ Up to 26 Individual Channels can be defined
The Individual Channels software is used to route
individual delegate microphone audio signals to the DCN
system audio channels. These individual audio channels
can only be received by Audio Expanders or Cobranet
Interfaces.
Functions
Individual Channels
A typical application for the Individual Channels software
is to individually record a selected number of
microphones in a courtroom environment (witness
protection often needs unrecognizable audio).
The individual channels share the DCN audio channels
with interpretation channels. A maximum of 26 individual
channels can be used.
Route Individual Channels
When a delegate audio signal is assigned as an individual
channel it is routed to a specific DCN audio channel and
available on the output of an Audio Expander or Cobranet
Interface. Optionally, it is then sent to an external audio
processing device (e.g. distortion/vocoder) and returned
to the audio input of the CCU, Audio Expander or
Cobranet Interface. Delegate units which are used in
Voice Activation mode, dual mode and all wireless units
can not be assigned to an individual channel.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Various software applications | 151
LBB 4187/00 Open Interface
1
The DCN Open Interface allows remote control of selected
DCN functions via third party equipment and control
software. Control data exchange between the DCN system
and the remote control device or system is carried out via
the Ethernet port on the CCU.
Ordering Information
LBB 4187/00 Open Interface
allows remote control of selected DCN functions via third party equipment and control
software
LBB4187/00
Software Options
LBB 4187/00‑E Open Interface E‑code
Electronic authorization code. Only valid for
the EMEA region.
www.boschsecurity.com
LBB4187/00-E
Bosch Security Systems
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Cameras and Accessories | 153
Cameras and Accessories
1
Cameras and Accessories
Transfer and exchange of information is a vital element in
conferences, from small informal gatherings to
international multi-lingual conferences with hundreds of
delegates. Audio systems have traditionally been at the
heart of conferences because a basic requirement of such
gatherings is that all present can clearly hear what is
being said, in a language they understand. But with
increasing sophistication in conference management, it is
possible to incorporate visual elements, thus adding an
extra dimension to conference proceedings.
There is an extremely wide range of visual equipment
suitable for use with the DCN system. This visual
equipment, combined with the facilities offered by the
Bosch DCN, provides each type of conference venue with
the possibility to fulfill even the most demanding wishes
of its customers. The DCN system combines excellent
audio quality with a wide range of visual presentation
possibilities. Many integral conference management
functions, such as voting information and results,
messages and microphone status, can be displayed in the
conference venue. The type of display used, such as a
video projector or LCD flat screen, depends on the
number of people who have to access the information.
Video cameras are also widely used in many venues. They
can show the delegates in a conference venue and allow
both internal viewing and external distribution to
broadcasting organizations. All these cameras have the
flexibility to enable them to be used in venues ranging
from small meeting rooms to parliaments and large
commercial conference venues.
This section contains a summary of Bosch products
suitable for use as video elements in a DCN system.
Bosch also supplies many more own-brand and third-party
products for this purpose. For more information, please
contact your local Bosch representative.
The DCN system can operate with a range of Allegiant
Video Switchers. These units are used in combination with
Allegiant Keyboards and the DCN Automatic Camera
Control software to configure a camera switching system.
This ensures that speaking delegates are always
automatically displayed on flat screens or large displays.
An outline is given below of the Allegiant Video Switchers
available. The LTC 8200 is recommended for DCN. This
allows up to 16 cameras to be connected, and has five
video outputs. Information about other Allegiant Video
Switchers and CCTV equipment can be found in the CCTV
Data Book and relevant data sheets.
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
154 | DCN Conference Solutions | Cameras and Accessories
1
DCN‑SWSACC Standalone
Automatic Camera Control
When all delegate positions are linked to camera
prepositions the configuration needs to be uploaded to
the DCN Conference system where it will be stored
persistent in the CCU.
The configuration file can be printed and stored on the
temporarily PC for later use. In case help or more
information is needed the on‑screen help can be activated
from the software.
After configuration the PC is removed and Bosch Allegiant
or Autodome is directly connected to the DCN Conference
system.
Technical Specifications
Electrical
Supported DCN systems
DCN Wireless Discussion System
version 2.68 or higher
Features
▶ On‑screen Pan, Tilt and zoom control
▶ Supports Windows 7
Supported operating systems
PC requirements
▶ On‑screen help facility
DCN‑SWSACC Standalone Automatic Camera Control of
the DCN Conference systems interfaces with the Bosch
Allegiant or Autodome. It selects fixed or movable
cameras to be activated to display the current active
speaker at a conference.
Functions
When a chairman or delegate microphone is activated on
the DCN Conference system equipment, the camera
assigned to that position is activated. When none of the
microphones are active, an overview camera is
automatically selected. The image can be displayed on
projectors or other screens together with information
about the current speaker if required (such as delegate
identification). The system operator has a dedicated
screen, which also displays information about which
camera is active. This system provides an extra dimension
to conference proceedings.
Windows 7 Home Premium (32 and
64 bits) or above.
Windows Vista Home Premium (32
and 64 bits) or above.
▶ For use with DCN Next Generation and DCN Wireless
Discussion Systems
▶ Print‑out of configuration setting
DCN Next Generation version 2.68
or higher
Dual core processor (2.66 GHz) and
2 Gb internal memory.
At least one serial port (2 serial ports
are preferred).
In case a PC without serial ports is
used one or two separate USB to serial port converters are needed.
Mechanical
Dimensions (H xW x D)
240 x 180 x 46 mm
Weight
0.375 kg
Ordering Information
DCN‑SWSACC Standalone Automatic
Camera Control
interfaces DCN Conference systems with the
Bosch Allegiant or Autodome.
DCN-SWSACC
The DCN‑SWSACC software runs on a PC which is
temporarily connected to configure the DCN Next
Generation or DCN Wireless Discussion System and the
Bosch Allegiant or Autodome.
With this PC the camera positions can be defined using
the on-screen Pan, Tilt and Zoom control and stored as
prepositions in the Autodome camera. At the same time a
delegate position is linked to a camera preposition.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Cameras and Accessories | 155
LTC 8200 Allegiant Video
Switcher
Technical Specifications
1
Electrical
LTC 8200/50
Rated voltage
220 to 240 VAC (50/60 Hz)
Voltage range
198 to 264 VAC
Power consumption
50 W
LTC 8200/60
Rated voltage
120 VAC (50/60 Hz)
Voltage range
100 to 140 VAC
Power consumption
50 W
LTC 8200/50 and LTC 8200/60
Features
▶ 16 camera inputs and five video outputs
▶ Control of AutoDome® Series dome cameras
▶ Compact single bay construction
The LTC 8200 Allegiant Video Switcher provides automatic
camera switching in conference venues. It is easily
configured using the DCN Next Generation Automatic
Camera Control software, and an Allegiant Keyboard. It
ensures that cameras are automatically switched to cover
the speaking delegate in conferences.
The LTC 8200 has 16 video inputs for connecting
cameras. Either fixed or dome cameras can be connected.
There are also five video outputs used to connect hall
displays or monitors.
Video input signal
0.5 Vpp to 2 Vpp
(composite negative sync.)
Gain
Unity ± 2 % (75 W)
Video bandwidth (-3dB)
25 MHz
Mechanical
Mounting
Rack mounting brackets included
Dimensions (H x W x D)
40 x 440 x 305 mm
(1.7 x 17.3 x 12 in)
Weight
4 kg (8.8 lbs)
Ordering Information
LTC 8200/50 Allegiant Video Switcher
rated voltage 220 to 240 VAC (50/60 Hz)
LTC8200/50
LTC 8200/60 Allegiant Video Switcher
rated voltage 120 VAC (50/60 Hz)
LTC8200/60
Up to four Allegiant Keyboards can be connected.
Functions
Controls and Indicators
• 48-character on-screen display
Interconnections
• 16 x BNC Video inputs
• 5 x monitor outputs
• Console, RS232 port for external PC or control
interface (CCU of DCN system) - 9-pin D-type
connector
• Biphase out, multiple ports (12 for LTC 8200) for
camera control - removable screw terminal connection
blocks.
• Keyboards, Multiple ports (4 for LTC 8200) for
keyboard connection - 6-pin RS485 ports for Allegiant
Keyboard use.
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
156 | DCN Conference Solutions | Cameras and Accessories
1
LTC 8555/00 Allegiant
Keyboard
Ordering Information
LTC 8555/00 Compact Full-function
Keyboard
variable speed joystick
LTC 8555/00
Features
▶ Full-function, ergonomically-designed keyboard
▶ Variable speed joystick control
▶ 48-character on-screen display
The LTC 8555/00 Allegiant Keyboard is used with the LTC
8200 Allegiant Video Switcher. It provides a convenient
means of operating and configuring the switcher. It is
equipped with a variable-speed pan and tilt joystick
control for positioning cameras, and also has an attractive
screen for displaying camera information.
Functions
The Allegiant Keyboard and Allegiant Video Switcher are
used with the DCN Next Generation Automatic Camera
Control software. A range of Allegiant Keyboard
accessories is available, including a keyboard extension
cable, keyboard extension kit and keyboard rack mount
kit.
Controls and Indicators
• Joystick control
• On-screen display
Technical Specifications
Mechanical
Dimensions (H x W x D)
51 x 220 x 155 mm
(2 x 8.7 x 6.1 in)
Weight
0.55 kg (1.2 lbs)
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Cameras and Accessories | 157
LTC 5136 Autodome
Controller
Power consumption
6W
1
Mechanical
Dimensions (H x W x D)
101 x 220 x 155 mm
(4 x 8.7 x 6.1 in)
Weight
0.55 kg (1.2 lbs)
Ordering Information
LTC 5136/51 AutoDome Controller
with 16 outputs for AutoDomes or for Allegiant Receiver/Drivers units, 230 VAC,
50/60 Hz
LTC 5136/51
LTC 5136/61 AutoDome Controller
with 16 outputs for AutoDomes or for Allegiant Receiver/Drivers units, 110 VAC,
50/60 Hz
LTC 5136/61
Features
▶ Full-function, ergonomically-designed keyboard
▶ Variable speed joystick control
This AutoDome® Controller provides the same
functionality as an Allegiant Keyboard and Allegiant video
switcher to configure and control a Bosch AutoDome®
system. It is required in DCN Next Generation systems
with Direct Camera Control to preposition an AutoDome®
system. The AutoDome® is temporarily connected for this
purpose to the AutoDome® Controller for setting the
prepositions as required for the different DCN Next
Generation microphone units. After positioning the
settings, the AutoDome® system is connected to the DCN
Next Generation CCU. The AutoDome® Controller is also
needed to change the programmed pre-positions when
required.
Functions
Controls and Indicators
• Joystick control
• On-screen display
Technical Specifications
Electrical
LTC 5136/51
Rated voltage
220 to 240 VAC (50/60 Hz)
Voltage range
195.5 to 253 VAC
Power consumption
6W
LTC 5136/61
Rated voltage
120 VAC (50/60 Hz)
Voltage range
105 to 132 VAC
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
158 | DCN Conference Solutions | Cameras and Accessories
1
AutoDome 300 Series PTZ
Camera System
Cable compensation provides extended coaxial and UTP
distance runs while preventing the image quality
degradation caused by signal losses from long cable
lengths.
Functions
Direct Camera control
The DCN system can be used in the Direct Camera
Control (DCC) mode. A single AutoDome system is then
directly connected to a CCU for automatic camera control.
The video output of the AutoDome system is connected to
a monitor or other video display device. The DCC mode is
available both for DCN Next Generation stand‑alone
systems without a control PC and for DCN Next
Generation systems with control PC. Setting AutoDome
system pre-positions in DCN Next Generation systems
with DCC requires use of AutoDome controller, both for
DCN Next Generation stand-alone systems and PCcontrolled DCN Next Generation systems. The DCC mode
can only be used in combination with:
Features
▶ High-speed PTZ dome
▶ Fully interchangeable CPUs, cameras, housings,
communications, and mounts
▶ Choice of 540 TVL 36x day/night night camera with
128x wide dynamic range or 26x and 18x day/night
cameras
▶ Optional hybrid operation provides simultaneous
analog (coax) and IP connectivity
▶ Advanced privacy masking
▶ Advanced alarm control with rules engine
▶ UTP transmission standard on all analog models
▶ Cable compensation extends cabling distances
▶ Multi-protocol capable
Bosch’s AutoDome modular camera system is a
revolutionary new concept in dome cameras and is ideal
for conference venues. More than just a series of cameras,
it’s a dome platform built around a system of intelligent,
interchangeable modules that allow you to update camera
functionality quickly and cost-effectively.
300 Series highlights
The AutoDome 300 Series includes support for 18x, 26x,
and the industry-leading 36x day/night PTZ cameras, and
several advanced features – including an alarm
management “rules” engine and privacy masking.
The AutoDome 300 Series supports a variety of standard
and optional video and data transmission methods,
including Bilinx (over coax and UTP), fiber, and even TCP/
IP over Ethernet. Remote control, configuration, and
firmware updates can also be performed over these
cables, offering you unparalleled control of your cameras.
Bosch Security Systems
•
•
A Bosch AutoDome
Central Control Unit DCN-CCU2 or DCN-CCUB2
High-performance PTZ day/night cameras
Image control and quality are integral aspects of any PTZ
dome system, and the AutoDome delivers. The 300 Series
is available with a choice of 18x, 26x, or an industryleading 36x optical zoom lens, and all 300 Series systems
offer a full 12x digital zoom. The 18x and 26x cameras
provide 470 TVL (NTSC) or 480 TVL (PAL), and the 36x
camera provides a full 540 TVL of horizontal resolution for
outstanding clarity and image detail. The 36x camera also
incorporates technology that dramatically improves the
dynamic range by 128 times. Also known as WDR (widedynamic range), it results in clear image reproduction in
extreme high-contrast environments.
The AutoScaling (proportional zoom) and AutoPivot
(automatically rotates and flips the camera) features
ensure optimal control.
Day/night capabilities and outstanding sensitivity make
300 Series cameras exceptional performers in all lighting
conditions. In low light, these cameras automatically
switch from color to monochrome by removing the IR
filter to boost infrared illumination sensitivity, while
maintaining superior image quality. For operation in the
darkest conditions, the SensUp control feature
automatically extends the shutter speed to as much as
one second. This increases sensitivity by more than 50
times.
With super-quick, 360° per-second pan and tilt speeds,
the AutoDome 300 Series outperforms other domes in its
class. The 300 Series supports 99 pre-positions and two
styles of guard tours: preset and record/playback. The
preset tour can handle up to 99 pre-positions with a
configurable dwell time between pre-positions; the order
and frequency with which each preset is visited can be
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Cameras and Accessories | 159
customized. The AutoDome 300 Series also provides
support for two recorded tours, which have a combined
duration of 15 minutes of movement. These are recorded
macros of an operator’s movements, including pan, tilt,
and zoom activities, and can be played back continuously.
1
For more information about cameras, refer to the CCTV
Data Book.
Ordering Information
AutoDome® 300 Series PTZ Camera
System
Contact your Bosch Security Systems, Inc.
representative for complete ordering information.
VG4-300
VG4312CCS AutoDome 300 Series PTZ
Day/Night Analog
PAL, 18x, in ceiling, clear dome
VG4-312-CCS
VG4312PCS AutoDome 300 Series PTZ
Day/Night Analog
PAL, 18x, indoor, clear dome, without wall
arm
VG4-312-PCS
Accessories
VG4-A-PA2 Pendant Arm Mount with 230
VAC Transformer
Pendant arm mount with power supply box
for AutoDome Series cameras with a 230
VAC transformer, white
www.boschsecurity.com
VG4-A-PA2
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
160 | DCN Conference Solutions | Cameras and Accessories
1
LTC 0455 Series Color
Camera
Technical Specifications
Electrical
Model No.
Rated Voltage Voltage Range
System
LTC 0455/11 12 VDC
24 VAC
50 Hz
10.8-39 VDC
12-28 VAC
45-65 Hz
PAL
LTC 0455/21 12 VDC
24 VAC
60 Hz
10.8-39 VDC
12-28 VAC
45-65 Hz
NTSC
LTC 0455/51 230 VAC
50Hz
85-265 VAC
45-65 Hz
PAL
LTC 0455/61 120 VAC
60Hz
85-265 VAC
45-65 Hz
NTSC
Power Consumption
4 W, excluding lens
Imager
Interline transfer CCD,
1/3-inch image format
Active Pixels
PAL Models
752 H x 582 V
NTSC Models
768 H x 494 V
Features
Mechanical
▶ 1/3-inch format CCD imager
Connectors
▶ High sensitivity
▶ Easy to install
▶ Accepts AC or DC voltages
The LTC 0455 series are compact rugged, 1/3-inch image
format digital color CCD cameras. They are ideal for
overview cameras in conference venues. Their superior
sensitivity, high resolution and picture quality provide
optimal performance in virtually all situations. The LTC
0455 cameras also come with a lens wizard that
automatically detects the type of lens installed and
provides an OSD guide that allows the installer to easily
adjust the lens level and focus without special tools or
filters.
- Video Output: BNC
- Video/DC-iris connector: 4-pin EIA-J
Power
LTC 0455/11 and
LTC 0455/21
Push type connectors, polarity independent,
isolated from video output terminals
LTC 0455/51
2-wire power cord with Euro plug
LTC 0455/61
2-wire power cord with polarized plug
Camera mounting
Top and Bottom, 1/4-inch 20 UNC
Lens mounting
C and CS
Dimensions
(H x W x D)
58 x 66 x 122 mm
(2.28 x 2.6 x 4.8 inch)
including connectors
Weight
0.45 kg (0.99 lb)
For more information about cameras, refer to the CCTV
Data Book
Ordering Information
Functions
Bilinx Technology
The LTC 0455 series cameras incorporate Bilinx. Bilinx is a
bidirectional communication capability embedded in the
video signal of all Bosch Dinion cameras. With Bilinx,
technicians can check status, change camera settings and
even update firmware from virtually anywhere along the
video cable. Bilinx reduces service and installation time,
provides for more accurate set-up and adjustment, and
improves overall performance. In addition, Bilinx uses the
standard video cable to transmit alarm and status
messages, providing superior performance without
additional installation steps.
Bosch Security Systems
LTC 0455/11 Dinion Color Camera
1/3-inch, 540 TVL, PAL, DSP, 12 VDC/24
VAC, 50 Hz
LTC0455/11
LTC 0455/21 Dinion Color Camera
1/3-inch, 540 TVL, NTSC, DSP, 12 VDC/24
VAC, 60 Hz
LTC0455/21
LTC 0455/51 Dinion Color Camera
1/3-inch, 540 TVL, PAL, DSP, 230 VAC, 50
Hz
LTC0455/51
LTC 0455/61 Dinion Color Camera
1/3-inch, 540 TVL, NTSC, DSP, 120 VAC, 60
Hz
LTC0455/61
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Cameras and Accessories | 161
UML Series 17-, 19-, 20inch High-performance
LCD Flat Panel Monitors
Features
▶ High‑resolution–500 TVL, 1600 x 1200 (UML-202-90)
or 1280 x 1024 (UML-192-90 and UML-172-90)–image
▶ Picture‑in‑Picture or split screen function for viewing
video on the PC screen
Technical Specifications
UML-172-90
UML-192-90
UML-202-90
Rated Voltage
110/230 VAC,
50/60 Hz
110/230 VAC,
50/60 Hz
110/230 VAC,
50/60 Hz
Voltage Range
90-256 VAC
90-256 VAC
90-256 VAC
Power at Rated <45 W
Voltage
<50 W
70 W
Sync Format
PAL/NTSC
PAL/NTSC
PAL/NTSC
LCD Panel
TFT LCD
TFT LCD
Screen Size
(H x V)
338 x 270 mm 376 x 301 mm
(13.3 x 10.6 in.) (14.8 x 11.9 in.)
408 x 306 mm
(16 x 12 in.)
Viewable Picture Area
17 in. (432 mm) 19 in. (483 mm)
measured diago- measured diagonally
nally
20.1 in.
(511 mm) measured diagonally
Pixel Pitch:
(H x V)
0.264 x 0.264 0.294 x 0.294 m 0.255 x 0.255 m
mm
m
m
(0.01 x 0.01 in.) (0.01 x 0.01 in.) (0.01 x 0.01 in.)
Resolution
1280 x 1024
pixels, 500 TV
lines typical
1280 x 1024 pix- 1600 x 1200 pixels, 500 TV lines els, 500 TV lines
typical
typical
Aspect Ratio
5:4
5:4
▶ Y/C (S-video) and loop‑through video and audio
inputs
▶ Long-life fluorescent backlight maintains optimal
screen brightness (300 cd/m2) throughout monitor
life
▶ 3-D comb filter and de-interlace circuitry for high
quality video
TFT LCD
4:3
Display Colors 16.7 million col- 16.7 million colors
ors
16.7 million colors
Response Time < 5 ms (typical) < 5 ms (typical)
< 16 ms (typical)
Backlight
Six (6) cathode
fluorescent tubes,
rated life 45,000
hours, at 50%
brightness
Two (2) cold
cathode fluorescent tubes, rated life 50,000
hours, at 50%
brightness
▶ Analog RGB, digital DVI, and digital HDMI inputs
▶ Two (2) composite BNC inputs and loop‑through
outputs
1
Electrical
Four (4) cold
cathode fluorescent tubes, rated
life 50,000 hours,
at 50% brightness
Mechanical
UML-172-90
Cabinet
Material
UML-192-90
Front and Chassis:
electrolytic galvanized iron
UML-202-90
Front: ABS plastic
Chassis: electrolytic galvanized
iron
Finish
Charcoal black
▶ Trigger and Auto Switching features allow the
monitors to change input sources
Mount
Wall mounting compatible with standard bracket,
100 mm centers, M4 thread
▶ Easy to use controls with remote and on-screen menu
display
Dimensions (W x H x D)
▶ Front panel control lockout
Monitor
389.7 x 348.9 x
74.5 mm
(15.3 x 13.7 x
2.9 in.)
428.5 x 379.0 x
79.5 mm
(16.9 x 14.9 x
3.3 in.)
460.4 x 395.1 x
81.0 mm
(18.1 x 15.5 x
3.19 in.)
5.86 kg (12.9 lb)
6.36 kg (14.0 lb)
7.50 kg (16.5 lb)
Weight
The Bosch family of high-performance LCD monitors are
high‑resolution (SXGA / UXGA), high‑performance liquid
crystal display (LCD) video display monitors which can be
used as an operator display with the DCN Automatic
Camera Control software.
Available in an ergonomic and aesthetically pleasing
design, these state‑of‑the‑art monitors include a color thin
film transistor (TFT) active matrix LCD panel.
www.boschsecurity.com
Monitor
Environmental
All Models
Operating
Temperature
0°C to 40°C (32°F to 104°F)
Storage
Temperature
–20°C to 60°C (–4°F to 140°F)
Humidity
10%-90%, non-condensing
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
162 | DCN Conference Solutions | Cameras and Accessories
1
For more information about monitors, refer to the CCTV
Data Book.
Ordering Information
UML-172-90 17-inch Color LCD Display
Monitor
17-inch (432 mm) color LCD monitor, 1280
X 1024 resolution, VGA, DVI, HDMI, CVBS,
audio, 120/230 VAC, 50/60 HZ
UML-172-90
UML-192-90 19-inch Color LCD Display
Monitor
19-inch (483 mm) color LCD monitor, 1280
X 1024 resolution, VGA, DVI, HDMI, CVBS,
audio, 120/230 VAC, 50/60 HZ
UML-192-90
UML‑202‑90 20-inch Color LCD Display
Monitor
20-inch (501 mm) color LCD monitor, 1600
X 1200 resolution, VGA, DVI, HDMI, CVBS,
audio, 120/230 VAC, 50/60 HZ
UML-202-90
Accessories
UMM-LW-30B Swivel/Tilt Wall Mount
Swivel/Tilt wall mount for flat panel LCD monitors, black
UMM-LW-30B
UMM-LW-20B Fixed Wall Mount
Fixed wall mount for flat panel LCD monitors,
black
UMM-LW-20B
UMM-LCDUB-RM Rack Mount Bracket for
LCD Monitors
Supports dual 8.4-in. and single 8.4- to 19in. LCD monitors in a standard VESA rack
cabinet
UMM-LCDUB-RM
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Information Displays | 163
Information Displays
1
Information Displays
A flexible and versatile display system is important for
distributing information in conference venues. Bosch
information displays provide a quick and effective means
of informing participants and audience of the status of
events such as conference arrangements, room allocation,
changes in the agenda, advertising spots, interpretation
distribution, microphone status, voting information and
results, and up‑to‑date news.
Within this range of information displays are products to
match the requirements of almost any conference, from
small-scale informal discussions to large-scale multilingual conferences.
Personal displays
The basic DCN Next Generation personal display system is
housed in Concentus units and consists of a graphical
LCD display for displaying text messages in almost every
available font. They display information generated by DCN
software modules as well as text to describe the
contribution unit soft key functions. LCD technology has
also been applied in the development of compact displays
that can be built into tabletops or the backs of seats,
providing an ideal solution for personal information
presentation to selected delegates or groups of delegates
or interpreters. These displays are an unobtrusive solution
for displaying live or recorded video material, adding a
valuable extra dimension to delegate information facilities
connected to a separate cable system.
Video display using Streaming Meeting Data
Conference Software Streaming Meeting Data (DCNSWSMD) (used together with a Video client application) is
an interface to provide meeting data such as current
speakers, request lists, vote results and other conference
related information to video screens or video projectors.
Video projectors are ideal for large audiences or longer
distance viewing. These systems allow high quality display
of any live or recorded video material as well as computer
generated graphics and text.
This way of displaying information is used in the majority
of the conference systems. Please find more information
about this solution in the Conference Software Suite
chapter.
Hall displays
Next to the above described video display possibilities,
the DCN system supports also numeric, alphanumeric and
geographic hall displays.
Hall displays provide information (like voting results and
other text and conference-related data) clearly and
effectively to a large number of conference participants. In
this chapter you will find more information about the Data
Distribution Board (DCN-DDB) which is needed to
connect a hall display to the DCN system.
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
164 | DCN Conference Solutions | Information Displays
1
DCN‑DDB Data Distribution Board
•
-
External initialization button and LED
8-bit parallel data input and output
Nine-pole D-sub socket for RS232 output
Technical Specifications
Electrical
External supply
7.5 – 35 VDC.
Mechanical
Dimensions (H x W)
100 x 200 mm (3.93 x 7.87 in)
Ordering Information
DCN‑DDB Data Distribution Board
Used to provide the data communication link
to the DCN Next Generation
DCN-DDB
Features
▶ Drives hall displays
▶ Allows transparent data transport for remote control
of external equipment
▶ Speak slowly and help indicator control
The DCN-DDB is a printed circuit board that is used with
digital equipment such as hall displays, recorder systems
and camera controllers to provide the data
communication link to the DCN Next Generation.
Transparent data transport between data communication
boards in the DCN Next Generation system is possible, i.e.
for remote control of slide projectors, lights, blinds,
projection screens etc. It is intended for mounting in
external equipment, and includes an RS232
communication port with a baud rate of 9600 or 1200
baud - selectable by an onboard dip switch. Opto-couplers
isolate it from the DCN Next Generation system. It can be
powered by DCN Next Generation system supply or an
external power source. Other function is to control
indicators to show speak slowly and help request from
interpreters. When the interpreter presses the speak
slowly or help button another output control of the DDB is
activated, which can control an indicator of the chairman
or operator’s position.
Functions
Controls and Indicators
• Initialization button with LED indication
Interconnections
• 2 m (78.7 in) cable terminated with a molded six-pole
circular connector
• Multi-pole PCB connector for:
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Installation Equipment | 165
Installation Equipment
1
The range of installation accessories greatly simplifies
system installation by the use of readymade cables with
connectors for both trunk cables and optical network
cables. Splitters allow cables to be split and run in diverse
directions, which mean contribution units and central
equipment can be located precisely where they are
required in a conference venue. Dedicated optical
network interfaces are available to make it possible to run
the system signal and data over great distances.
Installation equipment is used for both fixed and portable
installations.
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
166 | DCN Conference Solutions | Installation Equipment
1
LBB 4114/00 DCN Trunk
Splitter
Ordering Information
LBB 4114/00 DCN Trunk Splitter
2 m (78.7 in) cable, charcoal
LBB4114/00
The Trunk Splitter is used in conjunction with the system
installation to divide the trunk-line cabling, thus allowing
system installers to optimize layout of the trunk-line and
contribution equipment to suit the conference venue.
The Trunk Splitter comes complete with cable restraining
clamps and includes mounting holes for fixing to a floor or
wall.
Functions
Interconnections
• 2 m (78.7 in) long cable terminated with a molded sixpole circular connector
• Six-pole circular connector for loop-through
connections
• 2 x six-pole circular connector for trunk cable splitting
and pulse regeneration purposes
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
Mechanical
Mounting
Floor, cable duct or wall mounting
Dimensions (H x W x D)
35 x 49 x 140 mm (1.4 x 1.9 x 5.5 in)
Weight
0.3 kg (0.66 lb)
Color
Charcoal (PH 10736)
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Installation Equipment | 167
LBB 4115/00 DCN Tap-Off
Unit
Mechanical
Mounting
Floor, cable duct or wall mounting
Dimensions (H x W x D)
35 x 49 x 140 mm (1.4 x 1.9 x 5.5 in)
Weight
0.3 kg (0.66 lb)
Color
Charcoal (PH 10736)
Ordering Information
LBB 4115/00 DCN Tap-Off Unit
2 m (78.7 in) cable, charcoal
LBB4115/00
The Tap-Off Units create short-circuit proof tap-off points
on the trunk line cabling. Each tap-off point allows for
connection of up to five channel selector panels or one
tabletop contribution unit such as Discussion unit,
Concentus unit or Interpreter Desk. A Tap-Off Unit
consists of two tap-off points. The Tap-Off Unit comes
complete with cable restraining clamps and includes
mounting holes for fixing purposes.
Functions
Interconnections
• 2 m (78.7 in) cable terminated with a molded six-pole
circular connector
• Six-pole circular connector for loop-through
connections
• 2 x six-pole circular connector for trunk cable splitting
and pulse regeneration purposes
• Short-circuit proof tap-off points at the system cable
Certifications and Approvals
Region
Certification
Europe
CE
Technical Specifications
Electrical
Max power at Tap-offs
www.boschsecurity.com
4.5 W each
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
168 | DCN Conference Solutions | Installation Equipment
1
LBB 4116 Series DCN
Extension Cables
Cable terminated at both ends with a molded six-pole
circular connector (male and female). The extension to
the type number gives the length of the cable.
Technical Specifications
Mechanical
Dimensions (dia.)
6 mm (0.24 in)
Material
PVC
Color
Grey
Ordering Information
LBB 4116/02 DCN Extension Cable 2m
2 m (6.6 feet), terminated with connectors
LBB4116/02
LBB 4116/05 DCN Extension Cable 5m
5 m (16.0 feet), terminated with connectors
LBB4116/05
LBB 4116/10 DCN Extension Cable 10m
10 m (33.0 feet), terminated with connectors
LBB4116/10
LBB 4116/15 DCN Extension Cable 15m
15 m (49.2 feet), terminated with connectors
LBB4116/15
LBB 4116/20 DCN Extension Cable 20m
20 m (66.0 feet), terminated with connectors
LBB4116/20
LBB 4116/25 DCN Extension Cable 25m
25 m (82.0 feet), terminated with connectors
LBB4116/25
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Installation Equipment | 169
LBB 4116/00 DCN Installation Cable 100m
The LBB 4116/00 is a 100 m (328 ft) roll of cable identical
to DCN Extension cable assembly, but without the
connectors.
Certification
Europe
CE
Matching clamps for male/female cable connectors such
as those on the DCN Extension Cable (LBB 4416). One
clamp per male/ female connector required.
Ordering Information
Certifications and Approvals
Region
LBB 4117/00 DCN Cable
Locking Clamp (25 pcs)
LBB 4117/00 DCN Cable Locking Clamp
(25 pcs)
set of 25
LBB4117/00
Technical Specifications
Mechanical
Dimensions (dia.)
6 mm (0.24 in)
Material
PVC
Color
Grey
Ordering Information
LBB 4116/00 DCN Installation Cable 100m
100 m (328 feet), without connectors
www.boschsecurity.com
LBB4116/00
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
170 | DCN Conference Solutions | Installation Equipment
1
LBB 4118/00 DCN Termination Plug
LBB 4119/00 DCN Connectors (25 pairs)
The termination plug is specially designed for use with
opened-ended DCN cabling.
The set DCN Connectors contains 25 female and 25 male
connectors that can be used with the 100 m (328 ft) DCN
Installation Cable LBB 4116/00.
Certifications and Approvals
Region
Certification
Europe
CE
Ordering Information
LBB 4119/00 DCN Connectors (25 pairs)
25 female and 25 male connectors
LBB4119/00
Ordering Information
LBB 4118/00 DCN Termination Plug
use with opened-ended DCN cabling
Bosch Security Systems
LBB4118/00
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Installation Equipment | 171
LBB 4410/00 Optical
Network Splitter
Technical Specifications
1
Mechanical
Mounting
2 screws in bracket
Dimensions (H x W x D)
200 x 82.5 x 28.9 mm
(7.8 x 3.2 x 1.1 in)
Weight
0.3 kg (0.66 lb)
Color
Charcoal grey
Ordering Information
LBB 4410/00 Network Splitter
tap off two branches from the optical network cable run.
LBB4410/00
Features
▶ Redundant network connection
▶ Powered externally (48 VDC) or from the CCU
▶ External power is not fed into the main cable run
▶ Automatically powered from the external power
supply
▶ Maximum power feed to tap-off outlets can be
reduced
▶ Repeater function to extend the cable length by
50 meter (164 ft)
The optical network splitter is used in conjunction with
the system installation to tap off two branches from the
optical network cable run.
Functions
Controls and Indicators
• Power on indicator
• Error indicator
• 2 LEDs for diagnostics
• Jumpers to select maximum power fed to the tap offs
Interconnections
• 2 optical network connection for main run
• 2 optical network connection for tap off
• External power supply connector
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
172 | DCN Conference Solutions | Installation Equipment
1
LBB 4414/10 Fiber Interface Without Address
Ordering Information
LBB 4414/10 Fiber Interface
no network address, multimode
LBB4414/10
Features
▶ Redundant network connection
▶ Powered externally (48 VDC) or from the CCU
▶ Automatically powered from the external power
supply
The fiber interface is used in conjunction with the system
installation to convert from plastic optical network cable
to glass optical fiber and vice versa.
Functions
Controls and Indicators
• Power on indicator
• Error indicator
• 2 LEDs for diagnostics
• 2 control inputs (for future use)
Interconnections
• 1 optical network connection for plastic optical fiber
• 1 optical network connection for glass optical fiber
• External power supply connector
Technical Specifications
Mechanical
Mounting
2 screws in bracket
Dimensions (H x W x D)
200 x 82.5 x 28.9 mm
(7.8 x 3.2 x 1.1 in)
Weight
0.3 kg (0.66 lb)
Color
Charcoal grey
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Installation Equipment | 173
LBB 4416 Series Optical
Network Cables
Ordering Information
LBB 4416/10 Network Cable Assembly
10m
with the network connectors fitted
LBB4416/10
LBB 4416/20 Network Cable Assembly
20m
with the network connectors fitted
LBB4416/20
LBB 4416/50 Network Cable Assembly
50m
with the network connectors fitted
LBB4416/50
This is a special cable with 2 plastic fibers for data and
audio communication and 2 copper cores for the power
supply. The cable is supplied with the network connectors
fitted. This cable can be used to connect the CCU to audio
expanders.
The network cables are supplied in different lengths. The
extension (/xx) on the type number indicates the length of
the cable. Only the LBB 4416/00 is without connectors.
The connectors are available separately (LBB 4417/00).
Certifications and Approvals
Region
Certification
Europe
CE
Ordering Information
LBB 4416/00 Network Cable 100m
without the network connectors fitted
LBB4416/00
LBB 4418/00 Cable Connector Tool Kit
Optical fiber cable connector tools
LBB4418/00
LBB 4417/00 Set Network Connectors
(20 pcs)
20 connectors that can be used with the network cable.
LBB4417/00
LBB 4416/01 Network Cable Assembly
0.5m
with the network connectors fitted
LBB4416/01
LBB 4416/02 Network Cable Assembly 2m
with the network connectors fitted
LBB4416/02
LBB 4416/05 Network Cable Assembly 5m
with the network connectors fitted
LBB4416/05
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
174 | DCN Conference Solutions | Installation Equipment
1
LBB 4417/00 Set Network
Connectors (20 pcs)
LBB 4418/00 Cable
Connector Tool Kit
The set contains 20 connectors that can be used with the
network cable LBB 4416/00 to make up to ten custom
cables. The cable/connector toolkit LBB 4418/00 is
required for assembly.
Parts Included
Certifications and Approvals
Region
Certification
Poland
CNBOP
Safety
acc. to IEC 60065 / EN 60065
Immunity
acc. to EN 55103‑2 / EN 50130‑4 /
EN 50121‑4
Emissions
acc. to EN 55103-1 / FCC-47 part 15B
Emergency
acc. to EN 60849 / EN 54‑16 / ISO 7240‑16
Maritime
acc. to IEC 60945
1
Standard cutting pliers
1
Stripping pliers
1
Crimping pliers
1
Plastic optical fiber cutting/stripping tool
1
Plastic optical fiber positioning and indent tool
1
Torx screw driver
1
Spare cutting system
Ordering Information
LBB 4418/00 Cable Connector Tool Kit
Optical fiber cable connector tools
LBB4418/00
Accessories
LBB 4418/50 Spare Cutting System (2
pcs)
two replacement cutting systems for
LBB 4418/00
Ordering Information
LBB 4417/00 Set Network Connectors
(20 pcs)
20 connectors that can be used with the network cable.
Quantity Component
LBB4418/50
LBB4417/00
Accessories
LBB 4416/00 Network Cable 100m
without the network connectors fitted
Bosch Security Systems
LBB4416/00
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Installation Equipment | 175
LBB 4419/00 Cable
Couplers (10 pcs)
1
Cable couplers are used to couple LBB 4416/xx network
cable assemblies for extension.
Certifications and Approvals
Safety
acc. to IEC 60065 / EN 60065
Immunity
acc. to EN 55103‑2 / EN 50130‑4 /
EN 50121‑4
Emissions
acc. to EN 55103-1 / FCC-47 part 15B
Emergency
acc. to EN 60849 / EN 54‑16 / ISO 7240‑16
Maritime
acc. to IEC 60945
Ordering Information
LBB 4419/00 Cable Couplers (10 pcs)
used to couple LBB 4416/xx network cable
assemblies for extension.
www.boschsecurity.com
LBB4419/00
Bosch Security Systems
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 177
Classic PC Software
1
Classic Software (LBB 4170 to LBB 4190)
The classic software is a range of software modules for
wired DCN Next Generation systems using the DCN‑CCU
and DCN‑NCO. Please note that the classic software is not
compatible (and so will not work) with the new
DCN‑CCU(B)2 and also it will not work with DCN
Wireless.
Classic PC Software
Conference Soft- Smart Control
ware Suite
Software
DCN‑CCU
•
•
•
DCN‑CCUB
•
•
•
DCN‑WCCU
DCN‑NCO
•
•
•
DCN‑CCU2
•
•
•
DCN‑CCUB2
•
•
Compatibility overview
Available languages
See the following table for available languages.
Chinese (simplified)
Chinese (traditional)
Czech
Dutch
English
Finnish
French
German
Italian
Japanese
Russian
Slovenian
Spanish
Swedish
Available languages overview
Activating software
The DCN software (both suite and classic) is protected
with a license key. The license key depends on the CCU
and the set of software modules. This means that an
individual license key is required per CCU.
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
178 | DCN Conference Solutions | Classic PC Software
1
DCN‑CCU Central Control
Unit
•
•
•
•
•
•
•
•
•
•
•
Features
▶ Stylish and modern design (IF award)
▶ Control for up to 245 Contribution units
▶ Control for an unlimited number of channel selectors
▶ 2 x 32 high quality audio channels
▶ PC control facility
▶ Optical network coupling
▶ Redundant network capability
The Central Control Unit (CCU) includes features for
controlling delegate microphones, distributing
simultaneous interpretation and conducting voting
sessions, all without an operator.
In combination with a PC, this control unit brings greater
sophistication to conference control. Users can access an
extensive range of software modules, each with a specific
function in controlling and monitoring a conference. These
modules greatly expand the capacity to manage a
conference. In the event of PC failure, this control unit will
revert to its stand-alone operation mode, enabling the
conference to proceed.
•
•
•
Controls and Indicators
Front
•
•
Power on/off switch
2 x 16 Character LCD display for status information
and configuration
• Rotary control to navigate through the LCD menus
Back
•
•
•
•
•
•
Basic microphone management facilities
Four operational microphone modes:
- Open: microphone button control with request-tospeak (Auto)
- Override: microphone button with override of
activated microphones (FIFO)
- Voice: voice activated microphones
- Push-to-talk (push and hold button to speak)
Number of open microphones between 1 and 4
Bosch Security Systems
Two red LED overload indicators for the DCN network
outputs
Two red LED overload indicators for the optical
connections
Voltage selector
Interconnections
Front
•
One stereo headphone output 3.5 mm (0.14 in)
Back
•
•
•
Functions
Basic voting control for parliamentary voting
procedure. Delegates can register ‘Present’, ‘Yes’, ‘No’
and ‘Abstain’. The Concentus Chairman unit can start,
stop and suspend the voting. The total results can be
displayed on hall displays and on the LCD screens of
the units
A page function which activates a voting tone. With
this tone the chairman can indicate that a voting
round is about to start.
Basic simultaneous interpretation function with as
many as 31 language channels plus one floor channel
Basic intercom function with function to assign
intercom operator and intercom chairman (both can
be called from the interpreter desk)
Stand-alone automatic camera control
Extended conference facilities when using control PC
software or remote controllers
Adjustable sensitivity for the audio inputs
Adjustable level for the audio outputs
Audio insertion facility to connect external audio
processing devices or telephone couplers
Configuration of CCU and system via a display and a
single rotary push button
The CCU can be assigned a unique name by the
installer for easy identification
VU meter readings to monitor audio inputs and audio
outputs. The audio can be monitored using a
headphone
19” (2U) housing for tabletop or rack mounting
Handgrips for easy transportation
•
•
•
•
•
Euro power socket with built-in fuse
Two DCN outlet sockets for connection of units, plus
extension power supplies. Each socket is protected
against short-circuit (2 x six-pole circular sockets)
Two optical network connections for connection of
Integrus, various audio expanders or a network
controller
Two three-pole XLR balanced audio line inputs with
galvanic separation.
Two stereo Cinch unbalanced audio line inputs
Two three-pole XLR balanced audio line output with
galvanic separation.
Two stereo Cinch unbalanced audio line outputs
Two RS-232 serial data connectors for PC control, and
controlling cameras and diagnostics
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 179
Ordering Information
Parts Included
Quantity
Component
1
DCN-CCU Central Control Unit
1
Set of mounting brackets for 19” rack
1
Set of feet
1
System installation and user instruction on CD ROM
1
Power cord
DCN‑CCU Central control unit
for all regions except North-America
DCN-CCU
DCN‑CCU‑UL Central Control Unit UL/CSA
for the North-America region
DCN-CCU-UL
DCN‑CCU‑JP Central Control Unit (JP)
Japanese version
DCN‑CCU‑JP
Technical Specifications
Electrical
Supply voltage
115/230 V +/- 10 %
Power consumption
170 W
DCN system supply
40 VDC, max 65 W per DCN socket
Optical network supply
40 VDC, max 65 W
Total supply power
130 W
RS-232 connection
2 x nine-pole Sub-D female socket
Frequency response
30 Hz - 20 kHz (-3 dB at nominal level)
THD at nominal level
< 0.5 %
Cross talk attenuation
> 85 dB at 1 kHz
Dynamic range
> 90 dB
Signal-to-noise ratio
> 87 dBA
Audio inputs
XLR nominal input
-12 dBV (+/- 6 dB)
XLR maximum input
+12 dBV
Cinch nominal input
-24 dBV (+/- 6 dB)
Cinch maximum input
+0 dBV
Audio outputs
XLR nominal output
-12 dBV (+6 / -24 dB)
XLR maximum output
+12 dBV
Cinch nominal output
-24 dBV (+6 / -24 dB)
Cinch maximum output
+0 dBV
Mechanical
Mounting
Tabletop or mounted in a 19” rack
Dimensions (H x W x D)
for tabletop use, with feet
92 x 440 x 400 mm
(3.6 x 17.3 x 15.7 in)
for 19” rack use, with brackets
88 x 483 x 400 mm
(3.5 x 19 x 15.7 in)
in front of brackets
40 mm (1.6 in)
behind brackets
360 mm (14.2 in)
Weight
7 kg (15.4 lbs)
Color
Charcoal (PH 10736) with silver
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
180 | DCN Conference Solutions | Classic PC Software
1
DCN‑NCO Multi CCU
Network Controller
•
•
•
•
•
•
•
•
•
•
•
•
Features
▶ Stylish and modern design (IF award)
▶ Connection of up to 30 Central Control Units
▶ Control of up to 1500 delegate positions
•
•
Number of open microphones between 1 and 4
Basic voting control for parliamentary voting
procedure
Delegates can register ‘Present’, ‘Yes’, ‘No’ and
‘Abstain’. The Concentus Chairman unit can start, stop
and suspend the voting. The total results can be
displayed on hall displays and on the LCD screens of
the units
A page function which activates a voting tone. With
this tone the chairman can indicate that a voting
round is about to start
Basic simultaneous interpretation function with as
many as 31 language channels plus one floor channel
Basic intercom function with function to assign
intercom operator and intercom chairman (both can
be called from the interpreter desk)
Stand-alone automatic camera control
Extended conference facilities when using control PC
software or remote controllers
Adjustable sensitivity for the audio inputs
Adjustable level for the audio outputs
Audio insertion facility to connect external audio
processing devices or telephone couplers
Configuration of network controller and system via a
display and a single rotary push button
The network controller can be assigned a unique name
by the installer for easy identification
VU meter readings to monitor audio inputs and audio
outputs. The audio can be monitored using a
headphone
Loudspeaker and headphone connection for audio
monitoring.
19”(2U) housing for tabletop or rack mounting
Handgrips for easy transportation
▶ 2 x 32 high quality audio channels
•
▶ PC control facility
▶ Optical network coupling
•
•
▶ Redundant network capability
Controls and Indicators
Front
•
The network controller forms the heart of a multi CCU
system.
The network controller includes features for controlling
delegate microphones, distributing simultaneous
interpretation and conducting voting sessions, all without
an operator.
In combination with a PC, this control unit brings greater
sophistication to conference control. Users can access an
extensive range of software modules, each with a specific
function in controlling and monitoring a conference. These
modules greatly expand the capacity to manage a
conference. In the event of PC failure, this control unit will
revert to its stand-alone operation mode, enabling the
conference to proceed.
Functions
•
•
Basic microphone management facilities
Four operational microphone modes:
- Open: microphone button control with request-tospeak (Auto)
- Override: microphone button with override of
activated microphones (FIFO)
- Voice: voice activated microphones
- Push-to-talk: push and hold button to speak
Bosch Security Systems
2 x 16 Character LCD display for status information
and configuration
• Rotary control to navigate through the LCD menus
Back
•
Power on/off switch
Interconnections
• Euro power socket with built-in fuse
• Two optical network connections for connection of
Central Control Units, Integrus transmitters or various
audio expanders
• Two three-pole XLR balanced audio line inputs with
galvanic separation
• Two three-pole XLR balanced audio line inputs
without galvanic separation
• Four stereo Cinch unbalanced audio line inputs
• Two three-pole XLR balanced audio line outputs with
galvanic separation
• Two three-pole XLR balanced audio line outputs
without galvanic separation
• Four stereo Cinch unbalanced audio line outputs
• One stereo headphone output 3.5 mm (0.14 in)
• Eight control inputs
• Five control outputs
• One RS-232 serial data connectors for controlling
cameras and diagnostics
• One Ethernet connection for PC control
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 181
Ordering Information
Parts Included
Quantity
Component
1
DCN-NCO Multi CCU Network Controller
1
Set of mounting brackets for 19” rack
1
Set of feet
1
Set of connectors
1
System installation and user instruction on CD ROM
1
Power cord
DCN‑NCO Multi CCU Network Controller
for controlling delegate microphones, distributing simultaneous interpretation and conducting voting sessions
DCN-NCO
DCN‑NCO‑US Multi CCU Network
Controller (US)
US version
DCN‑NCO-US
Technical Specifications
Electrical
Supply voltage
115/230 V +/- 10 %
Power consumption
170 W
Optical network supply
40 VDC, max 65 W
Total supply power
130 W
RS-232 connection
1 x nine-pole Sub-D female socket
Ethernet connection
1 x RJ45 socket
Frequency response
30 Hz - 20 kHz (-3 dB at nominal level)
THD at nominal level
< 0.5 %
Cross talk attenuation
> 85 dB at 1 kHz
Dynamic range
> 90 dB
Signal-to-noise ratio
> 87 dBA
Audio inputs
XLR nominal input
-12 dBV (+/- 6 dB)
XLR maximum input
+12 dBV
Cinch nominal input
-24 dBV (+/- 6 dB)
Cinch maximum input
+0 dBV
Audio outputs
XLR nominal output
-12 dBV (+6 / -24 dB)
XLR maximum output
+12 dBV
Cinch nominal output
-24 dBV (+6 / -24 dB)
Cinch maximum output
+0 dBV
Mechanical
Mounting
Tabletop or mounted in a 19” rack
Dimensions (H x W x D)
for tabletop use, with feet
92 x 440 x 400 mm
(3.6 x 17.3 x 15.7 in)
for 19” rack use, with brackets
88 x 483 x 400 mm
(3.5 x 19 x 15.7 in)
in front of brackets
40 mm (1.6 in)
behind brackets
360 mm (14.2 in)
Weight
7 kg (15.4 lbs)
Color
Charcoal (PH 10736) with silver
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
182 | DCN Conference Solutions | Classic PC Software
1
LBB 4190/00 Startup
Installation/Configuration Notes
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
Active whenever DCN Next Generation software modules
are used.
Ordering Information
LBB 4190/00 Startup
I.e. used as a platform from which the other
software modules are selected
LBB4190/00
Software Options
LBB 4190/00‑E Startup E‑code
Electronic authorization code. Only valid for
the EMEA region.
LBB4190/00-E
Features
▶ Setting master volume levels
▶ Opening, closing and deleting Installation File
▶ Configuring the Startup program to automatically
load selected DCN Next Generation modules
▶ Accessing, acknowledging and printing error
messages
▶ On-screen help facility
The Startup screen is active whenever DCN Next
Generation software modules are used for controlling and
monitoring. This module is different from other DCN Next
Generation software modules as it is primarily used as a
platform from which the other modules are selected.
However, this is only one aspect of the different functions
of Startup.
Functions
When Startup is loaded, it presents the user with a
desktop window that is the DCN Next Generation opening
screen. The other DCN Next Generation modules are
represented by icons in this opening screen, and activated
simply by clicking on them. Startup also has a facility,
which allows other DCN Next Generation modules to be
loaded automatically. This saves having to manually select
modules that are used virtually every time the DCN Next
Generation system is in operation. The user can specify
any combination of modules for automatic Startup.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 183
LBB 4185/00 System
Installation
A dialogue box displaying the system configuration is
available at any time, with the total number of installed
delegate and chairman units, interpreter desks etc.
Downloading font sets
It is possible to download special font sets that allow
certain DCN Next Generation contribution units to display
characters in complex European languages, or icon-based
scripts such as Chinese.
Audio channel assignment
Features
▶ Single-point control of system installation
▶ Facilities for assigning functions to audio channels
▶ In-conference warning message when installation
configuration changes
▶ On-screen help facility
The System Installation software is an effective tool for
installers and system operators when installing and
setting up the DCN Next Generation system. System
installation, set-up and functions are brought entirely
under PC control through its easy-to-use, Windows-based
software.
Functions
The DCN Next Generation System Installation software
provides – in an easy yet methodical way – to specify the
number of audio channels dedicated to interpretation and
intercom facilities.
The DCN Next Generation system offers 32 audio output
channels, with a default configuration of 26 distribution, 4
contribution and 1 intercom link (requires 2 channels)
channels. Ten distribution channels can be assigned to
combinations of interpretations, floor language and
intercom, with two channels reserved for line output and
one for delegate loudspeakers as default. If required, all
31 channels can also be used for interpretations. All
channel assignments are interdependent. The number of
channels assigned to floor and intercom is dependent on
the number required for simultaneous interpretation. In
large international conferences using 31 interpretation
channels plus one floor channel, no channels are available
for intercom use. In such a case, the system performs
totally as an interpretation system. The task of assigning
audio channels is made easy with the aid of on-screen
channel selection, using a display with three scroll bars
that gives an instant overview of channel allocation and
the effect of altering any of these. System Installation is
primarily a preparation program. Once all microphones
and delegate units have been assigned seat numbers and
the audio channels configured and tested, there is no
need to use System Installation for day-to-day monitoring
and controlling of a conference. However, if the physical
layout changes in the conference hall (delegate units are
added, for example), the data in System Installation must
be updated, and a message appears in the installation
window.
The conference-related information generated is stored in
an installation file. The user can open, create, save, delete
and save these files under a new name.
Assigning seat numbers
The initial task in any installation is to assign seat
numbers to delegate contribution units. The System
Installation software offers a choice of two assignment
methods:
1. From the hall, by physically pressing delegate
microphone buttons in sequence. This is registered by
the PC, which in turn automatically allocates the unit a
number.
2. From the PC, where the operator selects a random
microphone and allocates a number. The next
assigned number will follow on sequentially. The
software instantly recognizes when a new unit is
installed by offering a seat number for the newly
installed unit.
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
184 | DCN Conference Solutions | Classic PC Software
1
Installation/Configuration Notes
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
System installation, set-up and functions are entirely
under PC control.
Ordering Information
LBB 4185/00 System Installation
effective tool for installers and system operators when installing and setting up the DCN
Next Generation system
LBB4185/00
Software Options
LBB 4185/00‑E System Installation E‑code
Electronic authorization code. Only valid for
the EMEA region.
Bosch Security Systems
LBB4185/00-E
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 185
LBB 4170/00 Microphone
Management
•
‘Key’ where delegates activate their microphones by
pressing their microphone buttons. (in this mode the
‘VIP’LED of the contribution units is illuminated)
• ‘Operator’ where the microphones of more active
delegates are activated by the operator
The DCN Next Generation system automatically
recognizes an assigned chairman unit and will
automatically add it to the notebook. Microphone
Management offers a number of microphone control
options. This has a bearing on both how the Microphone
Management module operates and how the conference
itself proceeds. These options are:
•
•
•
•
•
Control by operator with request-to-speak list
(manual)
Control by operator with request-to-speak list and
response list
Control by delegate with request-to-speak list (open)
Control by delegate with override of other delegate
microphones (first-in-first-out)
Control by delegate with voice activation
Features
▶ Single-point control of all microphone units
▶ Various microphone control options
▶ Extensive range of options for microphone related
parameters
▶ Output to printer and/or external equipment such as
cameras
▶ On-screen help facility
The efficient management of delegate microphone status
is a vital element in successful conference control. The
Microphone Management software module provides the
user with a powerful and easy-to-use tool that brings all
aspects of microphone management to a single point of
control.
Functions
Microphones are controlled using the name (or desk
number) of the delegate. The user can select microphones
for the speakers list (active microphones) or prepare a
request list. The order of delegates within the request list
and speakers list can be altered at any time before or
during a conference. A search facility is available that
allows the operator to locate specific delegates. It is also
possible to give notebook status to delegates, which
means they do not have to join the request list and can
enjoy certain other privileges not granted to other
delegates. The microphone type must be specified for the
notebook. The possibilities are:
•
Each mode allows a different level of both operator and
delegate control, so almost all situations can be covered.
For example, smaller, informal discussions require very
little operator control, so a mode such as control by
delegate would be ideal. For a full-scale international
conference with hundreds of participants, control by
operator with request-to-speak list would be more
appropriate. The operator can specify whether one, two,
three or four normal delegate microphones can be active
simultaneously. It is also possible to specify whether
delegates are allowed to cancel requests to speak or
switch their microphones off. The amount of time
delegates are allowed to speak can also be specified.
‘Chair’ for chairman microphones
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
186 | DCN Conference Solutions | Classic PC Software
Single-point control. Can be used in combination with the
Text/ Status Display module, LBB 4183/00.
1
Ordering Information
LBB 4170/00 Microphone Management
brings all aspects of microphone management to a single point of control
LBB4170/00
Software Options
LBB 4170/00‑E Microphone Management
E‑code
Electronic authorization code. Only valid for
the EMEA region.
LBB4170/00-E
A number of options are available as to how the
conference information is presented. The contents of the
main window can be altered, and how each delegate is
represented in any of the lists is also user-definable. There
is a facility to automatically test and scan all installed
microphones individually, with or without a sound
generator. The microphone under test is indicated onscreen and the results of the test are made known to the
system operator. This program can also be used in
combination with the Text/ Status Display module, LBB
4183/00, to show delegate names or seat numbers on a
hall display as soon as they are present on the speakers
list or request-to-speak list. Delegates’ microphone
activity can be recorded on file or sent to a printer.
Microphone activity data is also made available for
controlling external equipment such as an automatic
camera system.
During a conference, the main window is used for
monitoring and controlling delegate microphone status.
Depending on the operating mode, delegate microphones
can be switched on or off by simply clicking on the screen
microphone icon, or double-clicking on a delegates name.
A single click on a delegate name allows the operator to
either insert, delete or replace the delegate from the
request-to speak list.
Installation/Configuration Notes
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 187
LBB 4171/00 Synoptic
Microphone Control
Viewing options that reduce the size of the icons make it
easier to work with larger layouts. An optional on-screen
grid helps with alignment and a snap facility lines up icons
with the grid lines. Seat numbers can be automatically
assigned to each layout element. The synoptic layout can
be changed simply and quickly. Contribution units can be
moved by dragging them using the cursor. Standard
Windows functions such as cutting and pasting can be
used to move, remove or add elements to the layout.
Control mode
▶ Easily-created synoptic layout used for microphone
control
While layout mode is used to create a synoptic floor plan
of the conference venue (for preparation purposes),
control mode is used to monitor and control a conference.
The synoptic layout generated in layout mode becomes a
control panel in control mode. The icons in the layout
become functional, and are used as status indicators or
buttons to initiate actions for the contribution unit the
icon represents. The color of a particular icon is related to
the state (request-to-speak, active, etc.) of the actual
microphone it represents. Icons cannot be moved in
control mode, but a layout can be edited by returning to
layout mode. The state of a delegate microphone can be
altered by clicking on the appropriate icon. Synoptic
Microphone Control offers the following microphone
control mode options:
▶ Single-point control of all microphone units
•
Features
▶ Various microphone control options
▶ Output to printer and/or external equipment such as
cameras
•
•
Control by operator with request-to-speak list
(manual)
Control by delegate with request-to-speak list (open)
Control by delegate with override of other delegate
microphones (first-in-first-out)
▶ On-screen help facility
This software module takes microphone control away
from the traditional method of control panels and keys
and replaces it with an extremely user-friendly, on-screen
means of managing microphone status. A graphical
representation of the contribution units in a conference
venue is created and then used to control the microphone
status of delegates. Through the use of different icons and
colors, the user has an at-a-glance overview of the status
of all conference participants. The result is a highly visual
‘push-button’ conference control facility. There are two
modes of operation within Synoptic Microphone Control;
layout mode and control mode.
Functions
Layout mode
In layout mode, the user creates a graphical
representation of the contribution units present in the
conference venue. This synoptic layout is a plan view of
the conference venue. Layout mode contains dedicated
tools for this purpose. Icons representing the contribution
equipment are used to build up the layout. Each item of
contribution equipment (delegate unit, chairman unit,
podium or lavaliere microphone, etc.) has its own icon.
www.boschsecurity.com
The synoptic layout is stored in a layout file. There are a
number of options available to the user for working with
these files, all of which are standard DCN Next Generation
file options. These consist of opening, creating and saving
files under a new name. Delegate microphone activity can
be recorded on file or sent to a printer. Microphone
activity data is also made available for controlling external
equipment such as an automatic camera system. Synoptic
Microphone Control has a facility to automatically test and
scan all installed microphones individually, with or
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
188 | DCN Conference Solutions | Classic PC Software
1
without a sound generator. The microphone under test is
indicated on-screen and the results of the test are made
known to the system operator.
Installation/Configuration Notes
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
Single point of control. Standard Windows functions.
Ordering Information
LBB 4171/00 Synoptic Microphone
Control
two modes of operation within Synoptic Microphone Control; layout mode and control
mode
LBB4171/00
Software Options
LBB 4171/00‑E Synoptic Microphone
Control E‑code
Electronic authorization code. Only valid for
the EMEA region.
Bosch Security Systems
LBB4171/00-E
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 189
LBB 4172/00 Simultaneous Interpretation
an override facility. In interlock mode, the active
microphone must first be turned off before any other
microphones can become active. In override mode, any
microphone can automatically override the current active
microphone and become active. The interpreter system
settings are stored in an interpreter configuration file.
There are a number of options available to the user for
working with these files, all of which are standard DCN
NG file options. These consist of opening, creating and
saving files under a new name. A print function enables a
hard copy printout of desk and channel language
assignment– ideal for use as a reference to current system
settings.
Installation/Configuration Notes
Features
▶ Can accommodate 186 interpreter desks
▶ Online monitoring of interpretation activities
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
Interpreter system settings are stored in an interpreter
configuration file.
▶ Facilitates normal and relay interpretations
▶ Microphone mode options
▶ Specifying a language for each of the system
interpretation channels
▶ Determining the microphone interlock mode
▶ On-screen help facility
Ordering Information
LBB 4172/00 Simultaneous Interpretation
supports the preparation of simultaneous interpretation facilities and the monitoring of
interpreter activities during a conference
LBB4172/00
Software Options
Simultaneous interpretation is essential for international
conference venues. The Simultaneous Interpretation
program supports the preparation of simultaneous
interpretation facilities and the monitoring of interpreter
activities during a conference. It accommodates 31
interpreter booths, each with up to 6 interpreter desks.
LBB 4172/00‑E Simultaneous
Interpretation E‑code
Electronic authorization code. Only valid for
the EMEA region.
LBB4172/00-E
Functions
The main window has two display modes, both with
graphics for easy management of information. One gives a
channel-oriented overview of system status, such as which
language is present on that channel, the mnemonic for
that language, on which language the interpretation is
based, and the number of the desk and booth generating
that language. The other display mode gives the same
information in a different form, providing an overview of
the status of each desk in each booth. This includes booth
and desk status (active or non-active), and the language in
and out of each active desk. In addition, the software
enables the operator to establish microphone interlocks,
between booths and within booths, with or without using
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
190 | DCN Conference Solutions | Classic PC Software
1
LBB 4173/00 Intercom
system channel. The maximum number of intercom links is
5. If no intercom links are assigned, the intercom module
will not start.
Note
The number of DCN Next Generation audio
channels available for intercom purposes is
set using the System Installation software
LBB 4185/00.
Note
Delegate Database LBB 4180/00 is required if
delegate names are used.
Note
Simultaneous interpretation LBB 4172/00 is
required if interpreter names are used.
Features
▶ Enables private, two-way conversations between
delegates, chairmen, interpreters and other PC users
▶ Search facility to locate delegates
▶ Allows up to 5 simultaneous conversations
▶ Simple menus for ease of control
▶ On-screen help facility
The Intercom software module forms the basis of a
communication system that allows conference
participants to hold two-way private conversations. It
provides a means of setting up and controlling intercom
calls between delegates, chairmen, interpreters and other
PC-users during a conference.
It allows several types of calls to be made:
•
•
•
•
•
•
Participant to / from operator
Between participants
Interpreter to/from operator
Between interpreters
Participant to/from interpreter
Between PC operators in a multi-PC system
Functions
The Intercom software is used in combination with the
Intercom Handset and Cradle. It provides assistance in
both the pre-conference creation of an intercom network,
and the routing and controlling of intercom calls once the
conference is underway. Preparation work includes
assigning special intercom links between participants,
interpreters or both. Once the conference is taking place,
the operator can establish and re-route intercom calls via
simple on-screen windows. Each intercom link uses a
Bosch Security Systems
Installation/Configuration Notes
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
Software is used in combination with the Intercom
Handset and Cradle.
Ordering Information
LBB 4173/00 Intercom
allows conference participants to hold twoway private conversations
LBB4173/00
Software Options
LBB 4173/00‑E Intercom E‑code
Electronic authorization code. Only valid for
the EMEA region.
LBB4173/00-E
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 191
LBB 4175/00 Parliamentary Voting
Features
▶ Allows complete operator control of parliamentary
voting sessions
▶ Extensive motion preparation facilities
▶ Can output voting results to disk, hall displays or
printers
▶ Wide range of vote-related parameter options
▶ On-screen help facility
The Parliamentary Voting module is a DCN Next
Generation software module designed for controlling and
monitoring conferences and discussions using the DCN
Next Generation contribution equipment. The module
allows an operator to implement and manage voting at a
conference.
A script file consists of a number of proposals or motions
(between 1 and 999), each of which will be voted on. New
ones can be created and existing ones edited within script
files. Items to be edited are selected from a list in the
currently open script file and displayed on-screen. All
parameters related to this can be altered, although certain
parameters have to satisfy system-specified criteria. Once
a n item has been edited it is inserted back into the list.
Every item must have a unique number, which is used by
the DCN Next Generation system as a reference. The
name and description of each defines it for both users
and delegates. It is also possible to enable a quorum
function. This specifies how many authorized delegates
must be present before voting can legitimately take place.
A majority function determines what percentage of votes
constitutes a majority voting. Once a vote is ready to be
taken, it is recalled in the Control window and the voting
process is started. When the program enters the active
voting state, delegates can use their delegate units to
register votes. The user has full control over the voting
procedure, and can stop or suspend a vote at any time.
Motions that have already been voted on cannot be
edited, but voting again on the same motion is possible. It
is also possible to vote without opening a script file.
The program offers the possibility of displaying incoming
votes or the final result of a vote on hall displays
connected to the DCN Next Generation system, on
delegate units with a display facility, and on-screen. It is
possible to print out a hard copy of a vote with its results.
There is also a facility that automatically prints out the
results of a vote once voting is completed.
Note
Delegate Database LBB 4180/00 is required if
delegate names are used.
Functions
The program covers a number of functions including vote
preparation, specifying vote-related parameters, and
starting and controlling voting. The module has two main
windows; the Preparation window and the Control
window. The preparatory and parameter definition work is
mainly carried out from the Preparation window, and the
starting and controlling of voting is carried out from the
Control window.
The files created using this module are called script files
as they act as the script for voting procedures. The file
menu allows script files to be opened, created, deleted,
saved, saved under a different name, imported and
printed out.
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
192 | DCN Conference Solutions | Classic PC Software
1
Installation/Configuration Notes
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
Delegate Database LBB 4180/00 is required if delegate
names are used.
Ordering Information
LBB 4175/00 Parliamentary Voting
allows an operator to implement and manage
voting at a conference
LBB4175/00
Software Options
LBB 4175/00‑E Parliamentary Voting
E‑code
Electronic authorization code. Only valid for
the EMEA region.
Bosch Security Systems
LBB4175/00-E
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 193
LBB 4176/00 Multi Voting
script files as they act as the script for voting procedures.
A file menu allows script files to be opened, created,
saved, deleted and printed. There is also a facility for
importing script files that have been created and saved in
another application. Each script file can consist of a
number of voting motions (up to 9,999), each of which
can be selected from a ‘voting motions list’ in the
Preparation window. Once selected, a voting can be
edited and then inserted back into the voting list. All
parameters related to the voting can be altered although
certain parameters have to satisfy system specific criteria.
A search facility is provided to help locate specific voting
motions. Vote-related parameters can be specified for
each individual voting.
These are:
•
Features
▶ Allows selection between six different kinds of voting
▶ Extensive voting preparation facilities
▶ Wide range of vote-related parameter options
▶ Choice of three voting results display types
▶ On-screen help facility
This software module provides the means to select and
control six different kinds of conference voting, including
Parliamentary Voting. The voting types that can be
implemented or selected are:
•
•
•
•
•
•
Parliamentary
Opinion Poll
Audience Response
Rating
Multiple Choice
For/Against
In each case, the program allows the user to prepare for
voting, specify vote-related parameters, display and print
voting results and start and control voting.
Vote type (open or closed, majority or non-majority,
timed or non-timed)
• Time related options
• Results display style
• Interim results display
• Screen and print legends
• Hall display, vote weighting, roll call, voting LEDs and
abstain options
Once a motion is ready to be voted on, delegates can
register votes on their delegate units. Multi Voting
incorporates a roll call function which, when activated,
means that delegates must vote in a predetermined order
that is specified in the Delegate Database Module (LBB
4180/00). Otherwise, delegates can vote in any order at
the same time. Voting without a script is also possible,
and the same functions are available as with a script.
Voting can be stopped or suspended at any time, and
incoming votes or the final result of a vote can be
displayed on hall displays connected to the DCN Next
Generation system, on delegate units with a display
facility and on-screen. The user can print the final result of
a vote, and it can also be automatically exported to a file.
Note
Delegate Database LBB 4180/00 is required if
delegate names are used.
Functions
There are two main windows: the Preparation window and
the Control window. The Preparation window is where
voting motions are created and parameters are defined or
changed. The Control window is used for starting and
controlling voting. There is also a Results window for
displaying voting results. These can be displayed in bar-,
pie- or thermometer charts. It is also possible to see
voting results while the voting is still taking place. These
‘interim results’ can be specified in the Preparation
window. It is also possible to enable a quorum function.
This specifies how many authorized delegates must be
present before a voting can legitimately take place. A
majority function determines what percentage of votes
constitutes a majority voting. The files created are called
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
194 | DCN Conference Solutions | Classic PC Software
1
Installation/Configuration Notes
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
Delegate Database LBB 4180/00 is required if delegate
names are used.
Ordering Information
LBB 4176/00 Multi Voting
select and control six different kinds of conference voting, including Parliamentary Voting
LBB4176/00
Software Options
LBB 4176/00‑E Multi Voting E‑code
Electronic authorization code. Only valid for
the EMEA region.
Bosch Security Systems
LBB 4176/00-E
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 195
LBB 4178/00 Attendance
Registration
Access:
The settings specified for registration can also be used for
access. This means that although participants can enter
the conference venue, they cannot use any of the
contribution unit facilities (such as microphone, voting,
intercom) without first satisfying access requirements.
Access is also controlled by means of chip cards, with or
without PIN code. There is also an option whereby
participants register their presence at the entrance using
a chip card reader, and a specific contribution unit is then
made available for them. You can also control where
participants sit by specifying whether they can occupy any
seat or a particular, pre-defined one.
Features
▶ Registration using chip card with or without PINcode, or present key
▶ Access control facilities
▶ All data instantly available to operator
▶ Print facility to reproduce data in several formats
▶ On-screen help facility
This software module is used when registering for a
conference room, and for accessing facilities in the
conference room.
Functions
The functionality of Attendance Registration falls into two
categories:
Installation/Configuration Notes
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
Registration using chip card or present key.
Registration:
It is possible to specify entrance requirements that
conference participants have to meet before entering the
conference room. This normally means participants have
to insert a chip card in a chip card reader, either at the
entrance to the conference venue or at the contribution
unit. Registration at a contribution unit can also be by
means of pressing the ‘Present’ key. It is possible to
display lists on-screen of all ‘present’ and ‘absent’
participants, and print hard copies of these lists. There is
also a window that can be permanently displayed onscreen that gives an overview of all participants who have
registered their presence or absence.
www.boschsecurity.com
Ordering Information
LBB 4178/00 Attendance Registration
Used for registering and accessing facilities in
the conference room
LBB4178/00
Software Options
LBB 4178/00‑E Attendance Registration
E‑code
Electronic authorization code. Only valid for
the EMEA region.
LBB4178/00-E
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
196 | DCN Conference Solutions | Classic PC Software
1
LBB 4180/00 Delegate
Database
specified for each conference participant. Many
parameters are not general but delegate specific,
including:
•
•
•
•
•
•
•
•
PIN Code
Card Code for chip card
Delegate group
Delegate country
Delegate name
Delegate vote weight
Delegate seat number
Language of delegate screen display (French, German,
Italian, Dutch, English, Portuguese, Japanese or
Spanish)
• Simultaneous interpretation language
If the Chip Card Encoder (LBB 4157/00) and printer are
connected to the DCN Next Generation system, chip cards
can be encoded by using the ID Card Encoder module
(LBB 4181/00) and the labels for the chip cards printed. It
is also possible to grant or deny authorization to
individual delegates for the following:
•
•
•
Features
▶ Comprehensive database creation for all delegates
▶ Facility for configuring ‘screen line’ and ‘card label’
▶ Facility for printing labels and chip card production
▶ Dedicated fields for ease-of-use
▶ On-screen help facility
The Delegate Database software allows users to compile a
comprehensive database of information relating to
participants at a conference or meeting. The delegate
information is classed as either ‘conference-related’ or
‘personal’.
•
•
Conference-related deals with parameters like
interpretation language, vote weight and
authorization. This data is used by the DCN Next
Generation for conference controlling
Personal information deals with data such as home
address and telephone number, date of birth and fax
number. This data is for reference only
Microphone
Voting
Intercom
This is possible when they use an ID card to register, and
is carried out using the Attendance Registration and
Access Control module (LBB 4178/00). All delegate data
is input via the main window. For some entries (first
name, last name) the only restriction is the number of
characters entered. For other entries (country, group,
etc.), the input can easily be selected from a list of
options that is presented by the system when the user
activates that particular field. This options list can be
edited and expanded by the user. In the personal data
section, the user can input such delegate data as date-ofbirth, address, telephone number, fax and E-mail number.
Certain fields within the screen card can be identified in
order to print on an ID card label, or associated (as a
screen line) with other software packages such as
Microphone Management and Attendance Registration
and Access Control.
Functions
The data for each delegate is stored in a ‘screen card’,
which contains delegate data in dedicated fields. Screen
cards are stored collectively in a names file. There are a
number of options available to the user for working with
these files, all of which are standard DCN Next Generation
file options. These consist of opening, creating, deleting
and saving files under a new name. All information is
entered via a PC, before or during conference
proceedings. A considerable amount of data can be
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 197
Installation/Configuration Notes
1
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
Information is entered via a PC to compile a database.
Ordering Information
LBB 4180/00 Delegate Database
used to compile a comprehensive database
of information relating to participants at a
conference or meeting
LBB4180/00
Software Options
LBB 4180/00‑E Delegate Database E‑code
Electronic authorization code. Only valid for
the EMEA region.
www.boschsecurity.com
LBB4180/00-E
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
198 | DCN Conference Solutions | Classic PC Software
1
DCN‑IDENC ID Card
Encoder (USB)
Environmental
Operating temperature
0 ° to +50 °C (+32 ºF to +122 ºF)
Storage temperature
-20 ° to +60 °C (-4 ºF to +140 ºF)
Relative humidity
15% to 90%
Ordering Information
DCN‑IDENC ID Card Encoder (USB)
used in combination with the ID Card Encoder (DCN‑SWID), DCN‑SW and DCN‑SWDB
software modules
DCN-IDENC
DCN‑SWID Conference Software ID Card
Encoding
software module for producing ID cards. Can
only be used in combination with
DCN‑IDENC, DCN‑SW and DCN‑SWDB. Can
not be used with the DCN Wireless Discussion System (DCN‑WCCU).
DCN-SWID
DCN‑SW Conference Software Main
Module
a platform on which all other Conference
software modules run
DCN-SW
DCN‑SW‑E Conference Software Main
Module E‑code
Electronic authorization code. Only valid for
the EMEA region.
DCN-SW-E
▶ Supported by DCN‑SW and LBB 4190/00
DCN‑SWDB Conference Software Delegate
Database
can only be used in combination with
DCN‑SW
DCN-SWDB
The ID Card Encoder (USB) is used to encode ID cards
(DCN-IDCRD). It is used in combination with the following
Conference software modules: ID Card Encoder
(DCN‑SWID), Delegate Database (DCN‑SWDB) and
Conference Software Main module (DCN‑SW).
DCN‑SWDB‑E Conference Software
Delegate Database E-code
Electronic authorization code. Only valid for
the EMEA region.
DCN-SWDB-E
Features
▶ USB (2.0) supported
▶ ID card supported (DCN‑IDCRD)
The DCN‑IDENC can also be used with the LBB 4181/00
from software version 2.80 onwards.
Accessories
DCN‑IDCRD ID Card (100 pcs)
standard credit-card format, set of 100
DCN-IDCRD
Certifications and Approvals
FCC part 15 Class B, UL, CE, VCCI
EMV 2000 Level 1
Technical Specifications
Electrical
Power supply
Through USB bus
Indication on top of unit
One dual state green LED
Operating System
XP, Server2003, Vista
ID card supported
DCN‑IDCRD
Mechanical
Cable
1.5 m long with USB type A connector
Dimensions (H x W x D)
10 x 70 x 70 mm (0.39 x 2.8 x 2.8 in)
Weight
60 g (0.13 lb)
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 199
DCN‑IDCRD ID Card
(100 pcs)
LBB 4181/00 ID Card
Encoder
Encoder software is used in combination with the
Delegate Database software (LBB 4180/00) as a software
driver for producing ID cards. These ID Cards are used to
identify delegates during a conference and contain
information specified using Delegate Database. An
encoding unit (DCN‑IDENC) is also required to produce
the ID cards.
Installation/Configuration Notes
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
Features
▶ Attractive design
▶ Ample space for a name or other delegate personal
information
▶ Clear instructions showing how to insert the card into
a reader
These standard credit-card format ID cards are used by
delegates to identify them to the DCN Next Generation
system. This can be a pre-requisite for access to
contribution units and activities such as attendance
registration and voting.
Ordering Information
LBB 4181/00 ID Card Encoder
software driver for producing ID cards
LBB4181/00
Accessories
DCN‑IDENC ID Card Encoder (USB)
used in combination with the ID Card Encoder (DCN‑SWID), DCN‑SW and DCN‑SWDB
software modules
DCN-IDENC
Software Options
LBB 4181/00‑E ID Card Encoder E‑code
Electronic authorization code. Only valid for
the EMEA region.
LBB 4181/00-E
Technical Specifications
Mechanical
Dimensions (H x W)
85 x 54 mm (3.3 x 2.1 in)
Ordering Information
DCN‑IDCRD ID Card (100 pcs)
standard credit-card format, set of 100
www.boschsecurity.com
DCN-IDCRD
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
200 | DCN Conference Solutions | Classic PC Software
1
LBB 4182/00 Message
Distribution
Installation/Configuration Notes
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
The Message Distribution software can be used in
combination with the Video Display software
(LBB 4184/00) and the Text/Status Display software
(LBB 4183/00).
Ordering Information
LBB 4182/00 Message Distribution
allows the operator to originate messages
that can be sent via the DCN Next Generation
to delegates
LBB4182/00
Software Options
LBB 4182/00‑E Message Distribution
E‑code
Electronic authorization code. Only valid for
the EMEA region.
Features
LBB4182/00-E
▶ Message distribution to personal or hall displays
▶ Easy message generation procedure
▶ Archiving facility allows messages to be retrieved and
re-used
▶ Automatic message removal option
▶ On-screen help facility
The Message Distribution software allows the operator to
originate messages that can be sent via the DCN Next
Generation to individual delegates, groups of delegates
and other participants to view on their units. Messages
can also be sent to hall displays for general viewing by the
public and delegates.
Note
Message text is only available on delegate
units with display.
Functions
Message handling
Messages created can be stored in a library for later use.
There is a facility that automatically removes messages
after they have been displayed for a pre-specified period
of time.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 201
LBB 4183/00 Text/Status
Display
•
•
•
•
Microphone Information display. This information is
generated either using the Microphone Management
module (LBB 4170/00) or the Synoptic Microphone
Control module (LBB 4171/00). It consists of a list of
delegates whose microphones are active and those
waiting to speak This software supports three
different types of conference venue displays:
Numeric display. This is typically a dot matrix display
of only a few characters per line, and allows only
purely numerical information to be displayed
Alphanumeric display. Also typically a dot matrix
display, but for up to 10 lines of 33 characters.
Information can be displayed using both text and
numbers
Geographic or status display. This kind of display gives
information on the voting status of each conference
participant (if the vote is non-secret). A representation
of the seating plan and different colored LEDs for vote
status are used to achieve this.
Installation/Configuration Notes
Features
▶ Supports numeric, alphanumeric and geographic
displays
▶ Displays voting, message and microphone information
▶ Automatic priority system for displays
▶ Accepts information from other DCN Next Generation
software modules
▶ On-screen help facility
The Text/Status Display module provides a means of
displaying conference-related information on character
displays in the conference venue. Almost all displayed
information is generated by other DCN Next Generation
modules. The text that appears on screen to accompany
voting results can be generated using Text/ Status
Display. It is also possible to specify the display length of
the speakers list and the request-to-speak list.
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
Displayed information can be generated by modules
LBB 4175/00, LBB 4182/00, LBB 4170/00, LBB 4171/00.
Ordering Information
LBB 4183/00 Text/Status Display
used to display conference-related information on character displays in the conference
venue
LBB4183/00
Software Options
LBB 4183/00‑E Text/Status Display
E‑code
Electronic authorization code. Only valid for
the EMEA region.
LBB4183/00-E
Functions
Text/Status Display accepts the following types of display
information:
•
•
Voting Results display. This information is generated
using the Parliamentary Voting module (LBB 4175/00)
and consists of a voting motion (number, description,
time) and the results of the vote on that motion
Messages display. This information is generated using
the Message Distribution (LBB 4182/00) and consists
of a conference-related text message
www.boschsecurity.com
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
202 | DCN Conference Solutions | Classic PC Software
1
LBB 4184/00 Video
Display
Ordering Information
LBB 4184/00 Video Display
Used for displaying conference-related information
LBB4184/00
Software Options
Features
▶ Interface to monitors, video projectors and Vidiwalls
LBB 4184/00‑E Video Display E‑code
Electronic authorization code. Only valid for
the EMEA region.
LBB4184/00-E
Video Display is unlike all other DCN Next Generation
modules in that there is no user action required to
operate it. It automatically interfaces the DCN Next
Generation software with video displays. It provides a
means of displaying conference-related information on
video displays located in the conference venue. The
information can consist of text, numbers and graphical
elements like bar charts. All information displayed is
generated by other DCN Next Generation modules, and it
is not possible to alter this information in Video Display.
Functions
To use Video Display, it is necessary to have a Video
Display (VD) Client application. The VD Client application
receives the information that is passed to it from the
Video Display (server) module. The user can change
settings related to how information is displayed on the
video screens, such as text or background colors. This can
be carried out either during or after installation of Video
Display. This VD Client application accepts four different
types of display information:
•
•
•
•
Voting Results display. A voting motion and the results
of the vote on that motion.
Message display. A conference-related text message
(e.g. when and where lunch will be, or when
tomorrow’s session will begin).
Microphone Information display. A list of delegates
whose microphones are active and those waiting to
speak.
Attendance registration display. Information about
how many delegates are absent or present.
Installation/Configuration Notes
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
All information displayed is generated by other DCN Next
Generation modules.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Classic PC Software | 203
LBB 4188/00 Automatic
Camera Control
1
The DCN Next Generation Automatic Camera Control
software interfaces DCN Next Generation conference
systems with the Bosch Allegiant series of video control
switchers. It selects fixed or pre-positioned cameras (such
as the Bosch AutoDomes) to be activated to display the
current active speaker at a conference.
Functions
When a chairman or delegate microphone is activated on
the DCN Next Generation equipment, the camera assigned
to that position is activated. When no microphones are
active, an overview camera is automatically selected. The
image can be displayed on hall displays or other monitors
together with information about the current speaker if
required (such as delegate identification). The system
operator has a monitor, which also displays information
about which camera is active. This system provides an
extra dimension to conference proceedings.
Ordering Information
LBB 4188/00 Automatic Camera Control
PC controlled
LBB4188/00
LBB 4188/00‑E Automatic Camera Control
E‑code
Electronic authorization code. Only valid for
the EMEA region.
LBB4188-E
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
204 | DCN Conference Solutions | Classic PC Software
1
LBB 4189/00 Multi PC
Ordering Information
LBB 4189/00 Multi PC
Is needed when more than one PC is required
to control the DCN Next Generation system
LBB4189/00
Software Options
LBB 4189/00‑E Multi PC E‑code
Electronic authorization code. Only valid for
the EMEA region.
LBB4189/00-E
Features
▶ Master / Slave configuration
▶ On-screen help facility
The Multi PC software module is needed when more than
one PC is required to control the DCN Next Generation
system. All Slave PCs in a multi-PC environment are
connected via Ethernet to the Master PC, which is
connected the CCU.
Functions
This module sets up the master/slave mode of all other
modules in a multi PC environment. The Multi PC
configuration is accessed from the menu in the Startup
screen (LBB 4190/00).
Installation/Configuration Notes
This classic software module is intended for wired DCN
Next Generation systems using the DCN‑CCU and optional
DCN‑NCO. Please note that the classic software is not
compatible (will not work) with the new DCN‑CCU2 and
DCN‑CCUB2 and also it will not work with DCN Wireless.
Bosch Security Systems
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Technical Data | 205
Technical Data
General
Conforms to international standard IEC 60914, the
international standard for conference systems.
Frequency response
125 Hz to 20 kHz*
Harmonic distortion
< 0.5 %
Harmonic distortion at overload
<1%
Crosstalk attenuation at 4 kHz > 80 dB
Microphones
Dynamic range
> 90 dB
* Intercom links: 125 Hz to 5 kHz
Microphone frequency response
Frequency response
100 Hz to 16 kHz
Transducer type
Condenser
Directional pattern
Cardioid
Sensitivity
9.3 mV at 85 dB SPL (Rl=3k3, U=5V)
Max. SPL for THD
< 3 % 110 dB
Equivalent input noise level
24 dB lin, 21 dBA
Combined units
• Delegate microphone with transmission link to
interpreter headphone
• Delegate microphone with transmission link to
delegate headphone
• Delegate microphone with transmission link to
auxiliary output
• Interpreter microphone with transmission link to
interpreter headphone
• Interpreter microphone with transmission link to
delegate headphone
• Interpreter microphone with transmission link to
auxiliary output
General
Typical frequency response
125 Hz (-8 dB) to 16 kHz (-8 dB)
Front-to-random sensitivity in- > 4.6 dB
dex
Rated equivalent sound pressure level due to inherent
noise
< 24 dB (A)
Total harmonic distortion at
overload
<1%
Crosstalk attenuation
> 96 dB
System electrical and electro-acoustic characteristics
General
Microphone polar diagram of LBB 4149 measured with pink
noise in octaves
250
500 1k
F-Rear Sensitivity
Index
10.5
12
F-Random Sensitivity
Index
3.7
3.7
2k
8k
Hz
15.5 17.5 17
11.5
[dB]
4.6
3.9
[dB]
5.0
Transmission links
• From delegate to interpreter
• From delegate to delegate
• From interpreter to delegate
• From interpreter to interpreter
• From auxiliary input to delegate
• From auxiliary input to interpreter
• From delegate to auxiliary output
• From interpreter to auxiliary output
www.boschsecurity.com
4k
4.3
Normal input level
125 Hz (-8 dB) to 16 kHz (-8 dB)
Overload input level
> 4.6 dB
Automatic gain reduction at
Overload input level
25 dB interpretation channels, 21 dB delegate loudspeaker channel (not for PAfloor output
Operator master gain control
24 x 1 dB and OFF (Mute)
System environmental conditions
General
Working conditions
125 Hz (-8 dB) to 16 kHz (-8 dB)
Temperature range
- transport
- operating
-20 °C to +55 °C (-4 °F to +131 °F)
+5 °C to +45 °C (+41 °F to +113 °F)
Relative humidity
15 - 90 % max.
Safety
According to IEC 60065, and according
to CAN/CSA-E65 (Canada and USA) and
UL6500
EMC emission
According to harmonized standard
EN 55103-1 and FCC Rules (Part 15)
complying with the limits for a class A digital device
EMC immunity
According to harmonized standard
EN 55103-2
EMC approvals
Affixed with the CE mark
Bosch Security Systems
1
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
206 | DCN Conference Solutions | Technical Data
1
ESD
According to harmonized standard
EN 55103-2
Mains harmonics
According to harmonized standard
EN 55103-1
Other legal requirements
No cadmium used other than in the nickel
cadmium battery housed in the central
unit
Shock resistance
According to IEC 60069-2 – 29 Eb
Vibration resistance
According to IEC 60069-2 – 6 Fc
Power consumption and nodes
The Power Consumption and the nodes of units
connected to a CCU have a bearing on the total number of
such units that can be connected.
The maximum power of all units connected to DCN-CCU2
must not exceed 255 Watts.
The maximum number of nodes must not exceed 63.
The power of all units that can be connected to DCNCCU2 is given below:
Device
Watt
Nodes
DCN-DISS / DCN-DISL
2.75
-
DCN-DISD
2.8
-
DCN-DISCS
2.9
-
DCN-DISDCS
3.15
-
DCN-DISV
3.05
-
DCN- DISVCS
3.20
-
DCN-CON
3.4
-
DCN-CONCS
3.7
-
DCN-CONFF
4.2
-
DCN-CONCM
4.2
-
DCN-DDB
2
-
DCN-DDI
4.9
-
DCN-EPS
0.1
-
DCN-FCS
0.9
-
DCN-FVU
1.0
-
DCN-FVU-CN
1.0
-
DCN-IDESK
3.6
-
LBB 4114/00
1.3
-
LBB 4115/00
1.4
-
DCN-CCU2
n.a.
2
DCN-WAP
4
1
LBB 4402/00
7.6
1
PRS-4DEX4
6
1
LBB 4404/00
10.5
1
LBB 4414/10
4.6
1*
LBB 4410/00
3.9
1
INT-TX04
-
1
INT-TX08
-
2
INT-TX16
-
4
INT-TX32
-
8
* LBB 4414/00 does not count in the maximum of 63 nodes
Bosch Security Systems
DCN network limits
• Control capacity
- The maximum number of active devices that a
central control unit can control is 245.
- The number of passive devices is without limit.
- The maximum number of data distribution boards
in the system is 15.
- A multi‑CCU system can contain maximum 30
CCU’s and a total of 4000 active devices.
• Power capacity
- The maximum power that one DCN socket of the
central control unit can supply is 85 W.
• Loop-through
- The maximum number of loop-throughs in
succession for active devices is 25, where 4 m
additional extension cable is the equivalent of 1
device. If there are more than 25 loop-throughs of
active units, or an equivalent mix with passive
devices and additional extension cable, the signal
must be regenerated with a trunk splitter
(LBB4114/00).
- The maximum number of loop‑throughs in
succession for passive devices is 50, where 2 m
additional extension cable is the equivalent of 1
passive device. If there are more than 50
loop‑throughs of active units, or an equivalent mix
with additional extension cable, the signal must be
regenerated with a trunk splitter (LBB4114/00).
- In case active and passive units are mixed in the
trunk line, all units need to be seen as active units
with their corresponding loop‑through limit of 25.
• Tap‑off connections
- The maximum connections in succession between
the central control unit and the last tap‑off in a
branch are four.
• Cable-lengths
- With regenerative tap‑offs, the maximum cable
length is 250 m from the central control unit to the
furthest device in any branch of the DCN. The
maximum cable length of 250 m includes the
device cables and extension cables.
Wireless network limits
• Control capacity
- The maximum number of active devices in a DCN
system, with one central control unit, is 245.
• Coverage area
- For a good operation of the wireless part, all
wireless discussion units need to be in range of
the wireless access point. The wireless access
point has a typical at least coverage area of 30 m
by 30 m.
• Frequency
- The wireless network must operate in a different
frequency band than adjacent wireless (computer)
networks.
• Number of language distribution channels
- The wireless network has a maximum of 10
language distribution channels, excluding the
channel for the floor. The total number of language
distribution channels in the system, is set via the
interpreter desk or the Conference control
software.
- If there are more than 10 Language Distribution
Channels, only the first 10 channels will be
available for the wireless network. All higher
channels will only be available for the (wired) DCN
network and/or the infrared Integrus network.
www.boschsecurity.com
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
DCN Conference Solutions | Technical Data | 207
Optical network limits
• Number of nodes
- The maximum number of nodes that you can
connect to the optical network of the central
control unit is 61.
• Number of WAPs
- The maximum number of DCN‑WAP Wireless
Access Points in the optical network is 1.
• Cables
- The maximum length of the standard network
cable LBB4416/xx (Plastic Optical Fiber) cable is
50 m.
- If longer cables are required, the PRS‑FINNA can
be used to convert from plastic to glass and vice
versa. The maximum cable length of Glass Optical
Fiber is dependent on the used Plastic Optical
Fiber plus the equivalent cable length per used
device.
- The minimum bend radius of a 90 degree bend in a
POF cable is 25 mm.
- The minimum coiling radius of a POF cable is 100
mm.
• Power capacity
- It is important that the devices in the optical
network do not use more total power than you
supply to the devices. Each device uses power and
most devices do not have an independent power
supply.
Note
1
Refer to the DCN installation and operation
manual and use the DCN calculation tool for
DCN network limits in general.
www.boschsecurity.com
Bosch Security Systems
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
208 | Index
A
Applications
AutoDome 300 Series PTZ Camera System
7
158
C
Cameras and Accessories
Central Equipment
Classic PC Software
Concentus Units
Conference Software Suite
153
101
177
55
121
D
DCN Conference Solutions
1
DCN‑CCU Central Control Unit
178
DCN‑CCU2 Central Control Unit
102
DCN‑CCUB2 Central Control Unit Basic
104
DCN‑CON Concentus Basic
56
DCN‑CONCM Concentus Chairman
61
DCN‑CONCS Concentus Channel Selector
57
DCN‑CONFF Concentus Full Function
59
DCN‑DDB Data Distribution Board
164
DCN‑DDI Dual Delegate Interface
69
DCN‑DISBCM Buttons Chairman (10 sets)
30,53
DCN‑DISBDD Buttons Dual Use (10 sets)
30,53
DCN‑DISCLM Cable Clamp (25 pcs)
54,105
DCN‑DISCS Discussion Unit with Channel Selector
43
DCN‑DISD Basic Discussion Unit
41
DCN‑DISDCS Discussion Unit with Dual Channel
Selector
45
DCN‑DISR Rims for Discussion Units
34,51
DCN‑DISS / DCN‑DISL Discussion Unit with fixed
Microphone
39
DCN‑DISV Discussion Unit with Voting
47
DCN‑DISVCS Discussion Unit with Voting and
Channel Selection
49
DCN‑EPS Extension Power Supply
110
DCN‑FBP and DCN‑FBPS Blank Panel
82
DCN‑FCCCU Flight Case for 2 Central Control
Units
116
DCN‑FCCON Flight Case for 10 Concentus Units
65
DCN‑FCDIS Flight Case for 10 Discussion Units
54
DCN‑FCIDSK Flight Case for 2 Interpreter Desks
91
DCN‑FCOUP Flush Coupling (50 pcs)
83
DCN‑FCS Flush Channel Selector
80
DCN-FCWD10 Flight Case for 10 Wireless
Discussion Units
33
DCN‑FEC Flush End Cap (50 pcs)
83
DCN‑FET Flush Extraction Tools
85
DCN‑FHH Hand Held Microphone
71
DCN‑FLSP Flush Loudspeaker Panel
76
DCN-FMIC Flush Microphone Connection Panel
72
DCN‑FMICB Flush Microphone Control Panel
73
DCN‑FPRIOB Flush Priority Panel
75
DCN‑FPT Flush Positioning Tools (2 sets)
84
DCN‑FV Flush Voting Panel
77
DCN‑FVCRD Flush Voting ID Card Panel
78
DCN‑FVU Flush Voting Unit
79
DCN‑IDCRD ID Card (100 pcs)
133,199
DCN‑IDENC ID Card Encoder (USB)
132,198
DCN‑IDESK Interpreter Desk
88
DCN‑MICS/L Pluggable Microphone Short/Long
Stem
29,52,63,74,90
Bosch Security Systems
DCN‑MR Meeting Recorder
DCN‑MRFP Transcription Foot Pedal
DCN‑MRT Transcription Module
DCN‑NCO Multi CCU Network Controller
DCN-RCWD10 Roller Case for 10 Wireless
Discussion Units
DCN‑SW Conference Software Main Module
DCN‑SWAPI Conference Software API
DCN‑SWAT Conference Software Attendance &
Access
DCN‑SWDB Conference Software Delegate
Database
DCN‑SWID Conference Software ID Card
Encoding
DCN‑SWIND Individual Channels
DCN‑SWMD Conference Software
Message Distribution
DCN‑SWMM Conference Software Microphone
Management
DCN‑SWMPC Conference Software Multi PC
DCN‑SWPV Conference Software Parliamentary
Voting
DCN‑SWSACC Standalone Automatic Camera
Control
DCN‑SWSI Conference Software Simultaneous
Interpretation
DCN‑SWSMD Conference Software Streaming
Meeting Data
DCN‑SWSMV Synoptic Microphone and Voting
Software
DCN‑TTH Table Top Housing (10 pcs)
DCN‑UPTK Upgrade Toolkit
DCN‑WAP Wireless Access Point
DCN‑WCH05 Charger for 5 Battery Packs
DCN‑WDCS‑D Wireless Discussion Unit with
Channel Selector
DCN‑WD‑D Wireless Discussion Unit
DCN‑WDDCS‑D Wireless Discussion Unit with
Dual Channel Selector
DCN‑WDD‑D Wireless Dual Discussion Unit
DCN‑WDVCS‑D Wireless Discussion Unit with
Voting and Channel Selector
DCN‑WDV‑D Wireless Discussion Unit with Voting
DCN‑WFCCCU Flight Case for CCU and WAP
DCN‑WLIION‑D Battery Pack for Wireless
Discussion Units
DCN‑WPS Power Supply for Wireless Discussion
Units
144
148
146
180
32
122
136
134
128
131
150
130
124
137
126
154
129
135
140
84
31
106
28
17
15
21
19
25
23
117
27
35
E
Example
Example
Example
Example
Example
1
2
3
4
5
8
9
10
11
12
Flush Mounted Units
67
F
H
HDP‑ILN Induction Loop Neckband
HDP‑LWN Lightweight Neckband Headphone
Headphones
www.boschsecurity.com
98
94
93
_T7730178827_20111018T1501_noRegion_en-US_print_RC9.09d_for5grb_DatabookPDF
Index | 209
T
I
Information Displays
Installation Equipment
Interpretation and Language Distribution
Introduction
163
165
87
3
L
LBB 3015/04 High Quality Dynamic Headphones
99
LBB 3441/10 Under the Chin Headphones
97
LBB 3442/00 Single Earphone
96
LBB 3443 Lightweight Headphones
95
LBB 3555/00 DCN Intercom Handset
64,81
LBB 4114/00 DCN Trunk Splitter
166
LBB 4115/00 DCN Tap-Off Unit
167
LBB 4116 Series DCN Extension Cables
168
LBB 4116/00 DCN Installation Cable 100m
169
LBB 4117/00 DCN Cable Locking Clamp (25 pcs)
169
LBB 4118/00 DCN Termination Plug
170
LBB 4119/00 DCN Connectors (25 pairs)
170
LBB 4170/00 Microphone Management
185
LBB 4171/00 Synoptic Microphone Control
187
LBB 4172/00 Simultaneous Interpretation
189
LBB 4173/00 Intercom
190
LBB 4175/00 Parliamentary Voting
191
LBB 4176/00 Multi Voting
193
LBB 4178/00 Attendance Registration
195
LBB 4180/00 Delegate Database
196
LBB 4181/00 ID Card Encoder
199
LBB 4182/00 Message Distribution
200
LBB 4183/00 Text/Status Display
201
LBB 4184/00 Video Display
202
LBB 4185/00 System Installation
183
LBB 4187/00 Open Interface
151
LBB 4188/00 Automatic Camera Control
203
LBB 4189/00 Multi PC
204
LBB 4190/00 Startup
182
LBB 4402/00 Audio Expander
111
LBB 4404/00 CobraNet Interface
115
LBB 4410/00 Optical Network Splitter
171
LBB 4414/10 Fiber Interface Without Address
172
LBB 4416 Series Optical Network Cables
173
LBB 4417/00 Set Network Connectors (20 pcs)
174
LBB 4418/00 Cable Connector Tool Kit
174
LBB 4419/00 Cable Couplers (10 pcs)
175
LBB 9095/30 Interpreter Headphones
100
LBC 1259/01 Universal Floorstand
108
LTC 0455 Series Color Camera
160
LTC 5136 Autodome Controller
157
LTC 8200 Allegiant Video Switcher
155
LTC 8555/00 Allegiant Keyboard
156
M
Meeting Recorder Software
143
P
PRS 1AIP1 IP Audio Interface
PRS‑4DEX4 Audio Expander Digital
118
113
S
Smart Control Software
© Bosch Security Systems 2011 | Data subject to change without notice
T7730178827 | 18 Oct 2011
139
Technical Data
205
U
UML Series 17-, 19-, 20-inch High-performance
LCD Flat Panel Monitors
161
V
Various software applications
149
W
Wired Discussion Units
Wireless Discussion Units
37
13
A Tradition of Quality and Innovation
For over 100 years, the Bosch name
DCN Conference Solutions
Data Brochure
has stood for quality and reliability.
Bosch is the global supplier of choice
for innovative technology, backed by
the highest standards for service and
support.
Bosch Security Systems proudly
offers a wide range of security, safety,
communications and sound solutions
that are relied upon every day in
applications around the world, from
government facilities and public venues
to businesses, schools and homes.
Bosch Security Systems
To learn more about our
product offering, please visit
www.boschsecurity.com
or send an e-mail to
emea.securitysystems@bosch.com
© Bosch Security Systems, 2011
Printed in The Netherlands
Modifications reserved
CO-EH-en-05_F01U559648_02
2040_CO_DB_Cover_v4.indd 1-2
Local authority
wireless approval
Although DCN Wireless equipment
operates in a license-free band it is
subject to local certification
regulations. Please contact your
nearest Bosch representative to
check the situation in your country.
29/6/11 15:39:35