PRECAUTIONS / SAFETY WARNINGS. Altinex MT110-100/102, MULTI-TASKER MT110-101
Add to My manuals26 Pages
The Altinex MT110-100/102 is a powerful 16-input, 8-output audio matrix switcher that allows for flexible routing of audio signals in various applications. With its balanced inputs and outputs, it ensures superior audio quality and noise immunity, making it suitable for professional audio setups. The device features independent switching of each input to any output, enabling versatile signal distribution. It supports both stereo and mono audio, providing flexibility for different audio configurations.
advertisement
MULTITASKER™
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
MT110-100/102. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT110-100/102 and to prevent fire and shock hazard. Please read them carefully and heed all warnings.
1.1 GENERAL
•
Qualified ALTINEX service personnel, or their authorized representatives must perform all service.
1.2 INSTALLATION
•
To prevent fire or shock, do not expose this unit to rain or moisture. Do not place the
MT110-100/102 in direct sunlight, near heaters or heat radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam can harm internal components
•
Handle the MT110-100/102 carefully. Dropping or jarring can damage the card.
•
Do not pull the cables that are attached to the
MT110-100/102.
•
Insert the card carefully into the slots of the
Multi-Tasker™ without bending any edges.
1.3 CLEANING
•
Clean only the connector area with a dry cloth.
Never use strong detergents or solvents, such as alcohol or thinner. Do not use a wet cloth or water to clean the card. Do not clean or touch any component or PCB.
1.4 FCC / CE NOTICE
•
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
•
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their expense.
•
Any changes or modifications to the unit not expressly approved by ALTINEX, Inc. could void the user’s authority to operate the equipment.
400-0132-005 2
2
advertisement
Related manuals
advertisement
Table of contents
- 3 PRECAUTIONS / SAFETY WARNINGS
- 3 GENERAL
- 3 INSTALLATION
- 3 CLEANING
- 3 FCC / CE NOTICE
- 4 ABOUT YOUR MT
- 4 TECHNICAL SPECIFICATIONS
- 5 DESCRIPTION OF MT
- 6 APPLICATION DIAGRAM
- 6 1: TYPICAL SETUP
- 10 INSTALLING YOUR MT
- 10 OPERATION
- 10 RS-232 CONTROL
- 10 DESCRIPTION OF COMMANDS
- 24 SUMMARY OF COMMANDS
- 25 TROUBLESHOOTING GUIDE
- 25 LED IS NOT LIT
- 25 LED IS BLINKING RED
- 25 NO SOUND
- 26 DISTORTED SOUND
- 26 SOUND LEVEL IS LOW
- 26 ALTINEX POLICY
- 26 LIMITED WARRANTY/RETURN POLICY
- 26 CONTACT INFORMATION