Start the drying programme. AEG LAVATHERM 57520 electronic, 57520

16

Drying

Start the drying programme

0 Press the START button.

The drying programme starts. The programme progress is indicated on programme phase display.

Removing laundry or loading laundry when necessary

You can interrupt the drying process at any time to remove some of the laundry or to add more laundry.

0 Open the door.

1 Caution! The laundry and the drum may be hot.

0 Remove or add more laundry.

0 Close the door.

0 Press the START button to resume the drying process.

End of the drying process

The cooling phase starts shortly before the end of the drying process:

The heater is switched-off during this phase.

After the cooling phase the END / CREASE GUARD display is illuminated. You can now remove the washing from the tumble dryer.

The crease guard phase follows automatically after the drying process.

The drum rotates intermittently. This keeps your laundry loose and crease-free.

If you have pressed the AUDIBLE SIGNAL button, an acoustic signal is sounded intermittently during this phase.

You should remove the washing at the latest towards the end of the anti-crease phase to avoid creasing.

Removing the laundry

0 Open the door and remove the laundry.