advertisement
▼
Scroll to page 2
of
137
8.4.5 SNMP
The print server supports SNMP configuration. If it is enabled, please set up the following parameters.
SNMP System Contact: You can enter the print server administrator’s contact information here. This information will be displayed in the SNMP management tool.
SNMP System Location: You can enter the installed location of the print server here. This information will be displayed in the SNMP management tool.
90
advertisement
Related manuals
advertisement
Table of contents
- 9 1. INTRODUCTION
- 11 1.3.1 Print Server Network Functions
- 12 1.3.2 Network Printing Functions for Clients
- 14 1.3.3 Network Printing Functions for Network Server
- 19 2. HARDWARE INSTALLATION
- 20 3. WINDOWS PEER-TO-PEER NETWORK
- 35 3.5.1 Network Ports Quick Setup
- 37 3.5.2 Remote Ports (Utility)
- 43 4. WINDOWS NT/2000/2003 NETWORK
- 46 5. NETWARE NETWORK
- 48 5.2.1 Installation Using PCONSOLE
- 51 6. UNIX SYSTEM NETWORK
- 52 6.3.1 DHCP
- 52 6.3.2 BOOTP
- 56 7. CONFIGURATION UTILITY
- 82 8. WEB MANAGEMENT
- 83 8.3.1 System
- 83 8.3.2 Printer
- 84 8.3.3 TCP/IP
- 84 8.3.4 SMB
- 85 8.3.5 SNMP
- 85 8.3.6 NetWare
- 86 8.3.7 AppleTalk
- 86 8.3.8 Bonjour
- 87 8.4.1 System
- 90 8.4.2 Wireless
- 96 8.4.3 TCP/IP
- 97 8.4.4 SMB
- 98 8.4.5 SNMP
- 99 8.4.6 NetWare
- 100 8.4.7 AppleTalk
- 101 8.4.8 Bonjour
- 101 8.4.9 Save Settings
- 102 8.5.1 Load Default
- 103 8.5.2 Upgrade Firmware from Browser
- 104 8.5.3 Backup Setting
- 104 8.5.4 Restore System
- 105 9. TELNET MANAGEMENT
- 116 9.5.1 ipconfig
- 116 9.5.2 reboot
- 116 9.5.3 exit
- 116 9.5.4 help
- 117 10. IPP PRINTING
- 117 10.2.1 Print Server Side
- 117 10.2.2 Client Side
- 122 11. LPR SETTING IN MAC OS
- 126 12. UPNP SETUP
- 131 13. WINDOWS XP SP2 SETUP