Power Supply. LG Electronics Laser Shot LBP3460, LBP3460

Power Supply

WARNING

• Do not damage or modify the power cord. Also, do not place heavy objects on the power cord, or pull on or excessively bend it, as this could cause electrical damage and result in a fire or electrical shock.

• Keep the power cord away from a heat source; failure to do this may cause the power cord coating to melt, resulting in a fire or electrical shock.

• Do not plug or unplug the power plug with wet hands, as this may result in electrical shock.

• Do not plug the power cord to a multiplug power strip, as this may cause a fire or electrical shock.

• Do not bundle up or tie the power cord in a knot, as this may result in a fire or electrical shock.

• Insert the power plug completely into the AC power outlet, as failure to do so may result in a fire or electrical shock.

• Do not use power cords other than the power cord provided, as this may result in a fire or electrical shock.

• As a general rule, do not use extension cords or plug extension cords to a multiple power strip. If extension cords must be used or plugged to a multiple power strip, however, use them observing the following points on user's own authority. If you use extension cords improperly, this may result in a fire or electrical shock.

- Do not connect one extension cord to another.

- Make sure that the voltage of the power plug is the one indicated in the rating label

(attached on the back of the printer) when you use the printer.

- Use an extension cord that allows the current value greater than the necessary one indicated in the rating label (attached on the back of the printer).

- When you use an extension cord, untie the cord binding, and insert the power plug completely into the extension cord outlet to ensure a firm connection between the power cord and the extension cord.

- Periodically check that the extension cord is not overheated.

CAUTION

• Do not use power supplies with voltages other than those specified herein, as this may result in a fire or electrical shock.

• Always grasp the plug when unplugging the power cord. Pulling on the power cord may expose or snap the core wire, or otherwise damage the power cord. If the power cord is damaged, this could cause current to leak, resulting in a fire or electrical shock.

• Leave sufficient space around the power plug so that it can be unplugged easily. If objects are placed around the power plug, you will be unable to unplug it in an emergency.

xviii