4 TViX HD Setup Menu
This section indicates the Audio/Video settings.
You can set password to enter into setup menu. Setup password protection is available. on MISC menu
Within SET UP menu. Safety lock feature need to be enabled. This will block children changing setup accidentally.
The password is 1111
Audio : Digital Analog(PCM)
Digital
DTS Audio : Digital
WMA Audio : Analog(PCM)
AAC Audio: Analog(PCM)
TV Standard : NTSC NTSC
PAL
-> Auto Switch Off
TV Type : 4:3 letter Box 4:3 letter Box
4:3 Pan-Scan
16:9
Video Port : Composite/S-video Composite/S-video
Component
HDMI/DVI
HDMI Audio : OFF
Video Out Mode : 480i/576i 480i/576i
Luminance Level : Auto
Apply Now
* Audio : You can set the mode of audio output depending on audio codec used.
- If you set Audio to Digital, you can set DTS and WMA to digital or analog.
- Please set this according to the audio format your receiver supports.
* Analog : Select this when you connect the audio with a stereo RCA cable (the RED and WHITE cable)
You can set the mode of audio output by each audio codec used. If you set Audio to Digital, you can set DTS and WMA to digital or analog. Please set this according to the audio format your receiver supports.
* Digital : Select this when you connect the audio with an optical or coaxial cable for digital audio connection to the Decoder/Amplifier. There will be no analog audio out from the analog audio port of the TViX HD.
* TV Standard : The default video setting of the TViX HD is COMPOSITE (NTSC/S-VIDEO or PAL C/S-
VIDEO). This is the most general setting and works with almost all TVs.
* Auto Switch : is used when the video out is changed according to the NTSC , PAL or 24Hz format.
* TV Type : 4:3 Letter Box / 4:3 Pan & Scan for ordinary TVs / 16:9 for Wide TVs like HDTV or Plasma TV.
If the ratio of the TV is 4:3, select the 4:3 letter box or 4:3 Pan & Scan. If the ratio is 16:9, select 16:9.
* The 4:3 Letter box can show the original ratio of the multimedia file in 16:9.
15
* The 4:3 Pan & Scan will adjust the image of the 16:9 multimedia file to the 4:3 of the TV screen by scaling the image. (Currently, not support this mode)
* 16:9 can adjust any ratio of the multimedia file to the TV screen with the original image.
* Video Port : If you fail to see the initial TViX HD screen after turning the unit and TV on, make sure you have chosen the right TV out option by repeatedly pressing the TV Out button on the remote control.
Composite/S-Video is a default.
* HDMI Audio Auto/Manual : Select Off when you use audio Amplifier or external sound with HDMI.
* Video Out Mode : Select this when you connect the video through a component (YPbPr) or HDMI cable.
With HDMI setting, you can select the output resolution among Auto EDID/480P/720P/1080i/1080P. Setting it to 1080i will work on all HD grade TVs.
HDMI : Auto EDID/,480i/576i, 480P/576P, 720P, 1080i,1080P
Component/DVI : 480i/576i, 480P/576P, 720P, 1080i,1080P
* Luminance Level : Auto / 0-255 / 16-235, This option is enabled with HDMI or DVI Video out. (Auto EDID is not used)
* Apply Now : After configuration, please press ‘Apply Now’ to save the Video out state.
If you want to exit the Setting, Select the EXIT button(
16
) and then press OK on the remote control.