Switch off the inverters and Solar-Log. ABB PVS300

Connecting the inverters

Switch off the inverters and Solar-Log™.

2�1 Switch off the inverters and Solar-Log™�

Switching inverters off

Always turn off all of the inverters first before a making a cable connection between the Solar-Log™ and the connections inside the inverter; and before installing an interface card in the inverter,

To do this, read the manufacturer's documentation for the inverter, and proceed as follows:

1. Disconnect the AC side

2. Disconnect the DC side

3. Wait at least 5 minutes until the condensers in the inverters have discharged.

Switching the Solar-Log™ off

•

Remove the power plug from the socket or the "Power 12 V" jack on the Solar-Log™.

17