IP Filter Protection. Delta Electronics Ethernet Communication Module DVPEN01-SL

Ethernet Communication Module DVPEN01-SL

2. Check the “Default Setting” box and the “Warning” dialog box will appear. Click on “Yes” to return to default setting (in approx. 5 ~ 10 seconds), and the password will be cleared as well.

3. After the searching, all the parameters have already returned to their default settings.

6.6 IP Filter Protection

Application Setting up IP filter protection

Network requirement

(1) IP of DVPEN01-SL: 192.168.0.4

(2) Only connections to 192.168.0.7 and 172.16.0.1~172.16.0.255 are allowed.

1. See 6.1 for the connection and how to set up the communication.

2. Open the setup page and switch to “IP Filter” page.

40 DVP-PLC Application Manual

Ethernet Communication Module DVPEN01-SL

3. Check “Enable IP Filter Function” box. Enter “192.168.0.7” in No. 1 IP and “255.255.255.255” in all

“Netmask” columns.

4. Enter “192.168.0.1” in No. 2 IP and “255.255.255.0” in No.2 “Netmask” column. Click on "OK” to complete the setting. Only the equipment within the IP range can be connected.

DVP-PLC Application Manual

41