advertisement
Acronyms and abbreviations
ABEND abnormal end
ACU
Array Configuration Utility
ADU
Array Diagnostics Utility
AMP
Advanced Memory Protection
ASR
Automatic Server Recovery
BBWC battery-backed write cache
BIOS
Basic Input/Output System
CSA
Canadian Standards Association
DOS disk operating system
DRAM dynamic random access memory
ECC error checking and correcting
ESD electrostatic discharge
Acronyms and abbreviations 101
FBDIMM fully buffered DIMM
IEC
International Electrotechnical Commission iLO 2
Integrated Lights-Out 2
IML
Integrated Management Log
ISEE
Instant Support Enterprise Edition
KVM keyboard, video, and mouse
LED light-emitting diode
NFPA
National Fire Protection Association
NIC network interface controller
NVRAM non-volatile memory
ORCA
Option ROM Configuration for Arrays
OS operating system
PCI peripheral component interface
PCI-X peripheral component interconnect extended
Acronyms and abbreviations 102
PDU power distribution unit
POST
Power-On Self Test
PPM processor power module
PSP
ProLiant Support Pack
RAID redundant array of inexpensive (or independent) disks
RBSU
ROM-Based Setup Utility
RDP
Rapid Deployment Pack
RILOE II
Remote Insight Lights-Out Edition II
ROM read-only memory
SAS serial attached SCSI
SCSI small computer system interface
SDRAM synchronous dynamic RAM
SFF small form-factor
SIM
Systems Insight Manager
Acronyms and abbreviations 103
SNMP
Simple Network Management Protocol
SPI system peripheral interface
TMRA recommended ambient operating temperature
UID unit identification
UPS uninterruptible power system
USB universal serial bus
VCA
Version Control Agent
Acronyms and abbreviations 104
advertisement
Related manuals
advertisement
Table of contents
- 1 HP ProLiant DL580 Generation 5 Server User Guide
- 2 Notice
- 3 Contents
- 7 Component identification
- 7 Front panel components
- 8 Front panel LEDs and buttons
- 9 Systems Insight Display
- 10 Rear panel components
- 11 Rear panel LEDs and buttons
- 12 Power supply LED
- 13 System board components
- 14 SPI board components
- 14 System maintenance switch
- 15 FBDIMM slot locations
- 16 SAS device numbers
- 17 SAS hard drive LEDs
- 17 SAS hard drive LED combinations
- 18 Battery pack LEDs
- 20 Fan locations
- 21 Operations
- 21 Power up the server
- 21 Power down the server
- 21 Extending the server from the rack
- 23 Removing the access panel
- 24 Accessing the Systems Insight Display
- 24 Removing the system battery
- 26 Setup
- 26 Optional installation services
- 26 Rack planning resources
- 27 Optimum environment
- 27 Space and airflow requirements
- 27 Temperature requirements
- 28 Power requirements
- 28 Electrical grounding requirements
- 29 Rack warnings
- 29 Identifying the contents of the server shipping carton
- 29 Installing hardware options
- 30 Setting up a tower model server
- 31 Installing the server into the rack
- 31 Powering up and configuring the server
- 32 Installing the operating system
- 32 Registering the server
- 33 Hardware options installation
- 33 Introduction
- 33 Processor options
- 33 Removing the processor memory module
- 35 Installing a processor
- 39 Memory options
- 39 Memory configurations
- 40 Advanced ECC memory
- 41 Online spare memory configuration
- 42 Mirrored memory configuration
- 42 Installing FBDIMMs
- 43 Installing optional memory expansion boards
- 44 Hot-plug SAS hard drive options
- 44 Installing a hot-plug SAS hard drive
- 45 Installing the drive cage
- 49 Tape drive
- 52 Redundant hot-plug power supply option
- 53 Battery-backed write cache
- 56 Fans
- 57 Expansion board options
- 57 Installing non-hot-plug expansion boards
- 58 Installing the PCI Express x8 3 Slot Option Card
- 59 Installing the PCI-X 3 Slot Option Card
- 61 Cabling
- 61 BBWC cabling
- 62 Hard drive cabling
- 63 Tape drive cabling
- 63 SATA DVD drive cabling
- 63 DVD drive cabling
- 65 Server software and configuration utilities
- 65 Configuration tools
- 65 SmartStart software
- 65 SmartStart Scripting Toolkit
- 66 HP ROM-Based Setup Utility
- 66 Using RBSU
- 66 Configuring online spare memory
- 67 Configuring mirrored memory
- 67 Auto-configuration process
- 68 Boot options
- 68 BIOS Serial Console
- 68 HP ProLiant Essentials Rapid Deployment Pack
- 68 Option ROM Configuration for Arrays
- 69 Array Configuration Utility
- 69 Re-entering the server serial number and product ID
- 70 Management tools
- 70 Automatic Server Recovery
- 70 ROMPaq utility
- 70 System Online ROM flash component utility
- 70 Remote Insight Lights-Out Edition II
- 71 Integrated Lights-Out 2 technology
- 71 StorageWorks library and tape tools
- 71 HP Systems Insight Manager
- 71 Management Agents
- 72 Redundant ROM support
- 72 Safety and security benefits
- 72 USB support
- 72 Diagnostic tools
- 72 HP Insight Diagnostics
- 73 Integrated Management Log
- 73 Array Diagnostic Utility
- 73 Remote support and analysis tools
- 73 HP Instant Support Enterprise Edition
- 74 Keeping the system current
- 74 Drivers
- 74 ProLiant Support Packs
- 74 Operating system version support
- 74 Change control and proactive notification
- 74 Care Pack
- 75 Troubleshooting
- 75 Troubleshooting resources
- 75 Pre-diagnostic steps
- 75 Important safety information
- 76 Symbols on equipment
- 76 Warnings and cautions
- 77 Symptom information
- 78 Prepare the server for diagnosis
- 78 Loose connections
- 79 Service notifications
- 79 Troubleshooting flowcharts
- 79 Start diagnosis flowchart
- 80 General diagnosis flowchart
- 82 Server power-on problems flowchart
- 85 POST problems flowchart
- 86 OS boot problems flowchart
- 88 Server fault indications flowchart
- 90 POST error messages and beep codes
- 91 Regulatory compliance notices
- 91 Regulatory compliance identification numbers
- 91 Federal Communications Commission notice
- 91 FCC rating label
- 91 Class A equipment
- 91 Class B equipment
- 92 Declaration of conformity for products marked with the FCC logo, United States only
- 92 Modifications
- 92 Cables
- 93 Canadian notice (Avis Canadien)
- 93 European Union regulatory notice
- 93 Disposal of waste equipment by users in private households in the European Union
- 94 Japanese notice
- 94 BSMI notice
- 94 Korean notice
- 95 Laser compliance
- 95 Battery replacement notice
- 96 Taiwan battery recycling notice
- 96 Power cord statement for Japan
- 96 Acoustics statement for Germany (Geräuschemission)
- 97 Electrostatic discharge
- 97 Preventing electrostatic discharge
- 97 Grounding methods to prevent electrostatic discharge
- 98 Specifications
- 98 Environmental specifications
- 98 Server specifications
- 100 Technical support
- 100 Before you contact HP
- 100 HP contact information
- 101 Acronyms and abbreviations
- 105 Index