INSERTING/REMOVING THE COMPACT FLASH (CF) CARD. Konica-Minolta 2330, Dimage 2330 Zoom, Dimage-7, dimage 2330

D2330Z_Body_Eng.qxd.4 00.10.11 5:22 PM ページ 28

INSERTING/REMOVING THE COMPACT FLASH (CF) CARD

Be sure to turn off the power of the camera when inserting or removing the

CF card into or from the camera. Otherwise, the data in the card may be lost or the card may be damaged.

If you insert or remove the CF card when the camera is turned on, re-format the CF card after transferring the data from the card to your computer if the data is safe.

INSERTING THE CF CARD

Open the card-slot door as shown in the figure.

Insert the CF card into the card slot.

• Position the flat edge side of the card towards the camera lens and insert the card with the signal part facing down until the card stops.

• Insert the card straight. Do not insert it on the angle.

• If the card stops halfway, check the direction of the card. Forcing the card into the slot may damage the card or the camera.

- 28 -