Moving the Range. Whirlpool Slide-Out Range Hood, W10430947A

WARNING

Moving the Range

For direct-wired ranges:

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Install anti-tip bracket to floor or wall per installation instructions.

Slide range back so rear range foot is engaged in the slot of the anti-tip bracket.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

When moving range, slide range onto cardboard or hardboard to avoid damaging the floor covering.

If removing the range is necessary for cleaning or maintenance:

For power supply cord-connected ranges:

1. Slide range forward.

2. Unplug the power supply cord.

3. Complete cleaning or maintenance.

4. Plug in power supply cord.

5. Slide range back so rear range foot is under anti-tip bracket.

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1. Disconnect power.

2. Slide range forward.

3. Complete cleaning or maintenance.

4. Slide range back so rear range foot is under anti-tip bracket.

5. Refer to the “Verify Anti-Tip Bracket Is Installed and

Engaged” section to verify engagement.

6. Check that range is level.

7. Reconnect power.

6. Refer to the “Verify Anti-Tip Bracket Is Installed and

Engaged” section to verify engagement.

7. Check that range is level.

14

Notes

15

W10430947A

© 2011. Whirlpool Corporation.

All rights reserved.

10/11

Printed in U.S.A.