Installation. ViaSat HD receiver, Pace 460

Installation

To install your box, follow the instructions from this page up to page 16.

❖

The supplied equipment

◆

◆

◆

◆

◆

◆

◆

◆

If you have not already done so, remove all the packaging.

You should have the following items:

◆ Viasat PVR box (see page 6)

Remote control and batteries (see page 4)

User Guide in five languages (Swedish, Norwegian, Danish, Finnish and

English)

Mains lead - with 2-way connector and 2-pin mains plug (see right)

SCART lead (see right)

RF lead (see right)

Telephone lead - RJ11 to RJ11 (see right)

Telephone line (RJ11) adapter suitable for your location (see page 12)

Quad LNB and 2 x 25m coaxial cables (please ensure your LNB is set up correctly before you begin installing your box - see below)

Mains lead

SCART lead

RF lead

❖ Where to place your box

Before you start, make sure that your TV, VCR and box will be placed in a location that is conveniently located:

◆

◆

◆ near an easily-accessible mains wall socket;

Telephone lead within reach of your TV-antenna and satellite-dish leads; within 10 metres of a telephone point. (If not, you will need an extension telephone lead.)

WARNING

Before you connect your box to any other equipment, you must disconnect ALL the

equipment from the mains supply.

❖ What else do I need?

Smart card

To get access to the channels to which you have subscribed, you will need a smart card.

If you are an existing Viasat customer...

◆ Please remove your smart card from your old box and insert it into your new box.

If you are a new Viasat customer...

◆ The smart card is not included in the package, but will arrive in a separate delivery within a week. In the meantime you can use your box to watch non-encrypted channels.

7