:OUTPut<n> Commands (For MSO2000A-S/DS2000A-S). Rigol DS2072A, DS2202A, DS2000A Series

2 Command System

RIGOL

:OUTPut<n> Commands (For MSO2000A-S/DS2000A-S)

The :OUTPut<n> commands are used to enable or disable the output of the built-in signal source as well as set its output impedance.



:OUTPut[<n>][:STATe]



:OUTPut[<n>]:IMPedance

:OUTPut[<n>][:STATe]

Syntax

:OUTPut[<n>][:STATe] <bool>

:OUTPut[<n>][:STATe]?

Description

Enable or disable the output of the specified signal source channel; or query the output status of the specified signal source channel.

Parameter

Name Type Range

{{1|ON}|{0|OFF}}

{1|2}

Default

0|OFF

1

<bool> Bool

<n>

Return Format

Discrete

The query returns 1 or 0.

MSO2000A/DS2000A Programming Guide 2-211

RIGOL

:OUTPut[<n>]:IMPedance

Syntax

:OUTPut[<n>]:IMPedance <impedance>

:OUTPut[<n>]:IMPedance?

Description

Set or query the output impedance of the signal source channel.

Parameter

Name Type Range Default

<impedance> Discrete {OMEG|FIFTy} OMEG

1 <n>

Explanation

Discrete

OMEG: HighZ; FIFTy: 50Ω.

Return Format

{1|2}

The query returns OMEG or FIFT.

2-212

2 Command System

MSO2000A/DS2000A Programming Guide