Time clock Configurations. Acroprint TQ600, TQ600 Terminals

1

Getting Started

Important!

Do not attempt to service the TQ600 yourself. Opening the time clock will void the warranty. Always follow the instructions in the user guide.

• Do not place the time clock in direct sunlight. Bright light may significantly affect fingerprint reads or cause fingerprint verification to fail. The time clock is designed for indoor use in a temperature range of 32-104º F (0-40º C). Keep the time clock away from heat sources such as radiators.

• The time clock warranty does not cover defects or damages arising from improper installation, improper storage, abuse, ordinary wear or unauthorized service.

Time clock Configurations

The TQ600 is available in four reader options: fingerprint, proximity badge, magnetic stripe badge and barcode card reader. The fingerprint reader provides the most secure user verification as it uniquely identifies each user.

The badge is a faster method of verifying a user since you only need place your proximity badge near/in front of the reader or slide your barcode/magnetic stripe badges through the reader.

This manual provides information for all TQ600 time clock configurations.

Sections specifically about fingerprint verification or proximity/magnetic stripe/barcode badge verification will pertain only to the corresponding time clock.

Note: There are Menu variations between models since features and options are different between models.

1