CHAPTER 3. USING IP CAMERA VIA MOBILE PHONE. Zavio N6031

Chapter 3. Using IP Camera via Mobile Phone

3.1 Using IP Camera via iPhone

You can use Zavio Web User Interface via iPhone. Please follow the setting process below.

Then you can use Zavio web UI via iPhone.

1. Select Safari function

3. Type name and password.

Default value is admin / admin.

Then click Login In

2. Enter IP address in your web link.

4. The Zavio User Interface and live image will show up in the middle of screen.

Note: It will show continuous snapshots not a real time video streaming. Therefore, the recording feature is disabled.

8

3.2 Mobile Phone Viewing

To use IP cameras via mobile phones, please make sure your RTSP is set to “On” (Default is

“On”). To change the settings of IP cameras, Please check “Settings → Basic → Camera →

General.”

1. 3G Mobile Phone Streaming Viewing

For 3G mobile phone viewing, type “ rtsp://<IP>:<PORT>/video.3gp ” into your 3G

Streaming Link. <IP> is the Public IP address of your IP camera; <PORT> is the RTSP port of your IP camera (Default value is 554.) Example: rtsp://100.10.10.1:554/video.3gp

Note: You can also use RTSP clients (RealPlayer, VLC, QuickTime Player…etc.) to view RTSP streaming, just type in “ rtsp://<IP>:<PORT>/video.3gp

” as the Player URL

2. 2.5G Mobile Phone WAP Viewing

For 2.5G mobile phone viewing, type “ <IP>/mobile.wml ” into your 2.5G WAP Browser.

<IP> is the Public IP address of your IP camera.

3. 2.5G Mobile Phone Browser Viewing

For 2.5G mobile phone viewing, type “ <IP>/mobile.htm ” into your 2.5G Web Browser.

<IP> is the Public IP address of your IP camera.

9