Clarke® LIMITED U.S. WARRANTY. Clarke Mini-Max 28, Mini-Max 26, Mini-Max 30
Add to My manuals66 Pages
advertisement
Clarke
®
LIMITED U.S. WARRANTY
This Clarke Industrial/Commercial Product is warranted to be free from defects in materials and workmanship under normal use and service, when operated and maintained in accordance with Clarke's Maintenance and Operations instructions. The warranty period is subject to the conditions stated below.
3 YEARS FOR PARTS AND 1 YEAR FOR SERVICE LABOR (See exceptions below)
Motors must be inspected for carbon motor brush wear at six-month intervals by an authorized Clarke repair station.
Failure to comply with the six-month inspection requirement or failure to replace worn motor brushes identified during the inspection will void the warranty on the motors. Cost of the six-month inspection and replacement of carbon motor brushes is the responsibility of the purchaser. In the event of a warranty claim on the motors, proof of inspection and any required motor brush replacement must be provided. This warranty is extended only to the original purchaser for use of the product.
It does not cover normal wear parts such as electrical cable, rubber parts, hoses and motor brushes.
BATTERY WARRANTY
In addition to the items above, any original equipment Clarke Battery which becomes unserviceable under normal use within a period of ninety (90) days from date of sale to the original user will be repaired or replaced with one of equal specification at our option, F.O.B. any authorized Clarke Sales or Service Branch, with no charge to the user, except transportation costs. After expiration of the above ninety (90) day period, any battery which fails under normal use will be adjusted to the original user with a new battery of equal specification on an eighteen (18) months pro rate basis from the date of purchase.
Adjustment will be determined using the then current list price, plus transportation costs.
Warranty is rendered null and void if battery is not kept filled to the proper level with DISTILLED WATER.
CLARKE: POLYDUR ® AUTOMATIC SCRUBBER SOLUTION AND RECOVERY TANK EIGHT-YEAR U.S.
GUARANTEE
Your new Clarke machine has polydur Solution and Recovery Tanks. Polydur is a rotationally molded, low-density linear polyethylene that won't crack or dent, and withstands most corrosives and temperature extremes. Clarke backs up your Polydur tanks with an eight-year guarantee. If a tank breaks or leaks under normal use within eight years of the date of purchase, it will be replaced free.
CLARKE UNIBODY FRAME FIVE-YEAR U.S. WARRANTY
Clarke warranties the frame for a period of five years against defects in materials and workmanship under normal use and service.
STATED WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED
Clarke's liability under this warranty is limited to repair of the product and/or replacement of parts and is given to purchaser in lieu of all other remedies, including INCIDENTAL AND CONSEQUENTIAL DAMAGES.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE SPECIFIED HEREIN. THERE ARE NO WARRANTIES WHICH
EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. NO WARRANTIES, INCLUDING BUT NOT LIMITED TO WAR-
RANTY OF MERCHANTABILITY, SHALL BE IMPLIED. A warranty registration card is provided with your Clarke product.
Return the card to assist Clarke in providing the performance you expect from your new floor machine.
If a difficulty develops with the product, you should: a) Contact the nearest authorized Clarke repair location or contact the
Clarke Service Operations Department, 2100 Highway 265, Springdale, Arkansas 72764, for the nearest authorized Clarke repair location. Only these locations are authorized to make repairs to the product under this warranty. (b) Return the product to the nearest Clarke repair location. Transportation charges to and from the repair location must be prepaid by the purchaser. Clarke will repair the product and/or replace any defective parts with out charge within a reasonable time after receipt of the product.
Clarke, 2100 Highway 265, Springdale, Arkansas 72764.
Clarke reserves the right to make changes or improvements to its machine without notice.
Always use genuine Clarke Parts for repair.
Page -66-
Division of
2100 Highway 265
Springdale, Arkansas, 72764
Clarke ® Operator's Manual -MINI MAX
advertisement
Related manuals
advertisement
Table of contents
- 1 Operator's Manual
- 2 Table of Contents
- 3 OPERATOR SAFETY INSTRUCTIONS
- 5 Introduction & Machine Specifications
- 6 Symbols Used On MINI-MAX 26/30/28
- 7 Machine Control Panel
- 8 Machine Controls and Features
- 9 How To Prepare the Machine For Operation
- 9 How To Handle the Packed Machine
- 9 How to Unpack the Machine
- 9 How to Install the Batteries
- 10 Battery Maintenance
- 11 How to Charge the Batteries
- 11 Recharging the Batteries
- 12 Level Indicators for the Charge of the Batteries
- 12 How To Install the Squeegee
- 12 How to Adjust the Squeegee
- 13 How to Install the Rotary Brush Head Unit
- 13 How to Install the Rotary Brushes
- 14 How to Install and Adjust the Brush Housings on the Rotary Brush Head Unit
- 14 How to Remove the Rotary Brush Head Unit
- 15 How to Install the Cylindrical Brush Head Unit (see
- 15 How to Install the Cylindrical Brushes
- 16 How to Install and Adjust the Side Skirts on the Cylindrical Brush Head Unit
- 16 How to Remove the Cylindrical Brush Head Unit
- 17 How To Operate the Machine
- 17 How to Operate the Squeegee and the Vacuum Motor
- 17 How to Fill the Solution Tank
- 18 Operating the Machine
- 19 When You Begin Your Work Period
- 19 How to Clean a Floor
- 20 How to Clean a Very Dirty Floor
- 20 When You End Your Work Period
- 22 Maintenance
- 22 MAINTENANCE TO BE DONE EVERY WEEK
- 22 Battery Inspection and Cleaning
- 22 Cleaning the Recovery Tank and Filter
- 23 Cleaning the Solution Tank and Filter
- 24 Squeegee Maintenance
- 24 Front Squeegee Blade Replacement
- 24 Rear Squeegee Blade Replacement
- 25 HOW TO CORRECT PROBLEMS IN THE MACHINE
- 26 APPLICATIONS
- 27 ACCESSORIES
- 29 Parts and Service Manual
- 30 Frame and Front Cover Assembly Drawing
- 31 Frame and Front Cover Assembly Parts List
- 32 Steering Assembly Drawing
- 33 Steering Assembly Parts List
- 34 Wheel and Transaxle Assembly Drawing
- 35 Wheel and Transaxle Assembly Parts List
- 36 Brake Assembly Drawing
- 37 Brake Assembly Parts List
- 38 Recovery Tank Assembly Drawing
- 39 Recovery Tank Assembly Parts List
- 40 Seat and Solution Tank Assembly Drawing
- 41 Seat and Solution Tank Assembly Parts List
- 42 Brush Head Carriage Assembly Drawing
- 43 Brush Head Carriage Assembly Parts List
- 44 Rotary Brush Head Assembly Drawing
- 45 Rotary Brush Head Assembly Parts List
- 46 Rotary Gear Box and Brush Assembly Drawing
- 47 Rotary Gear Box and Brush Assembly Parts List
- 48 Cylindrical Brush Head Assembly Drawing
- 49 Cylindrical Brush Head Assembly Parts List
- 50 Squeegee Lift Assembly Drawing
- 51 Squeegee Lift Assembly Parts List
- 52 Squeegee Assembly Drawing
- 53 Squeegee Assembly Parts List
- 54 Electrical Panel Assembly Drawing
- 55 Electrical Panel Assembly Parts List
- 56 36 Volt Battery Pack and Battery Charger
- 57 Vac Motor Assembly
- 58 MINI-MAX 26/30 Electrical Connection Diagram
- 59 MINI-MAX 28 Electrical Connection Diagram
- 60 MINI-MAX 26/30 Electrical Schematic
- 62 MINI-MAX 28 Electrical Schematic
- 65 PRODUCT SUPPORT BRANCHES
- 66 Clarke® LIMITED U.S. WARRANTY