USB HDD Adapter and Cable
DIGITUS ® USB 2.0 for IDE/SATA adapter cable DIGITUS ® USB 2.0 for IDE/SATA adapter cable
Easy Connection - Fast Transferring - Backup/Files for every
HDD/SSD
• Supports 2.5/3.5 IDE and SATA hard disks (and 1.8 hard disks with adapter, not included in scope of delivery)
• Supports SATA, SATA II
• Compatible with USB 2.0 (High-Speed)
• Compatible with USB Mass Storage Class
• Contains a USB-Y cable for better and more stable power supply
• Supports 480Mbps High-Speed (HS) and 12Mbps Full-Speed USB operational speeds
• Supports ATA/ATAPI Ultra DMA Mode
• Supports ATA/ATAPI PACKET Command Feature Set
• Supports ATA/ATAPI LBA48-bit Addressing Mode
• High-Speed data transfer, low power consumption
• Blue LEDs for status display
• Delivery includes power supply unit
• Suitable for Windows 7/Vista/XP/Mac OS 10.X
311287 / DA-70148-3 USB 2.0 IDE & SATA cable
DIGITUS ® 3.5 hard disks IDE to SATA
Interface Converter
High-speed data transfer with low power consumption
• Supports 2.5/3.5/5.25 IDE and SATA hard disks
• Supports SATA, SATA II
• Compatible with USB 2.0 (High-Speed)
• Compatible with USB Mass Storage Class
• High USB data transfer rate up to 480Mbps
• High-speed data transfer, low power consumption
• A power supply unit has not been included; please use your connections at your desktop computer
(see user manual)
• Suitable for Windows 7/Vista/XP/Mac OS 10.X
288305 / DA-70202 USB 2.0 to IDE & SATA adapter cable, without power supply unit
DIGITUS ® IDE to SATA/SATA to IDE adapter
DS-33151-1
DS-33150-1
The comfortable solution for expanded use of already existing IDE hard disks
• Suitable for 3.5 IDE hard disks, converts IDE into a SATA interface
• Easy to install: Connect converter to 3.5 IDE hard disk and fasten with two screws; hard disk is now ready to be connected with the SATA interface or for operations in a SATA docking station
• The enclosed metal casing allows easy installation without tangling cables
• Supports SATA and SATA II standards with up to 1.5Gbps transfer speed
• Supported ATA/ATAPI data transfer rates 66, 100, 133 and 150MB/s
• SATA “Plug and Play” operations, no additional software necessary for operations
• Supports hard disks from Maxtor, Samsung, IBM, Hitachi, Seagate and Western Digital (adapter incl.)
Ideal for use with older motherboards that do not support SATA connections
• Enables use of storage devices with SATA connection to a IDE controller.
• Stand-alone Ultra ATA on Serial ATA Bridgeboard Design
• Serial ATA 1.0 specifications, revision 2.2 conform
• Chipset: SIL3811
• Transfer rate: 1.5Gb/s
• Supports all kinds of SATA Storage Devices (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk, ...)
• Compact dimensions for direct connection to SATA hard disks
• Board design: Horizontal version
283867 / DA-70545 3.5 Hard disks IDE to SATA Interface Converter
317791 / DS-33150-1 SATA to IDE Adapter
317807 / DS-33151-1 IDE to SATA Adapter
23