advertisement
Regulator Owner’s Manual
............................................................................................
Servicing
Another unique safety feature of the Status regulator is that it monitors the usage, in hours and calendar months, from when the regulator is first used or last serviced. The diver is informed that the first stage requires servicing by a flashing “SVC” indicator on the LCD screen. This will occur when the regulator is initially pressurised. To keep your regulator in premium condition it is vital that this is regularly and correctly serviced. You will know by quick examination of the display that your medium pressure is OK.
Understanding the Status
What is medium pressure?
All first stage regulators are designed to reduce the very high cylinder pressure down to a more controllable medium or interstage pressure.
This medium pressure which is the driving force of the regulator, is supplied to the second stage which in turn controls the supply of gas to the diver. knowing the medium pressure is within its ideal operating range, gives the diver full confidence that the first stage is at its optimum before every dive.
Status Product Range
XTX 200(FSR)
Status
XTX 100(FSR)
Status
XTX 50(DST)
Status
XTX 40(DS4)
Status
Status Operating Procedure
1/ Attach the Status to the cylinder valve as instructed in section
“Attaching the 1st Stage to the Cylinder Valve-Din.”
Caution: Use a small amount of an appropriate lubricant ( such as
Christo-Lube) LIGHTLY applied to the thread of the Din Handwheel periodically. This prevents seizing on the Cylinder Valve. DO NOT
OVER LUBRICATE or apply to the internals of the handwheel or cylinder valve gas-way.
2/ Then slowly open the cylinder valve.
3/ When the Status is pressurised the micro-electronics are automatically activated.The Status will display its condition within a 20 second time period.
17
advertisement
Related manuals
advertisement
Table of contents
- 4 General Precautions & Warnings
- 7 Enriched Air Nitrox Use (EAN)
- 8 countries EN 1443-3 and EN
- 10 Second Stage Hose Configuration
- 11 Diver Changeable Exhaust System (DCE)
- 13 External Second Stage Adjustments
- 13 Integrated Venturi Switch
- 14 Inhalation Resistance Control Knob
- 15 Egress Second Stage
- 16 Status
- 16 Safety First
- 16 Status Operational LCD Display Sequence
- 17 Servicing
- 17 Understanding the Status
- 17 Status Product Range
- 17 Status Operating Procedure
- 18 Status Condition Display Guide
- 19 Cold Water Diving
- 19 If the Status Fails to Display
- 20 Warranty Restriction
- 21 First Stage Environmental Protection
- 21 Second Stage Cold Water Protection
- 22 Auxilliary Emergency Breathing Systems
- 25 Hose Fitting Operation For Lightweight 2nd Stages
- 27 Attaching the First Stage to the Cylinder Valve (Yoke)
- 35 After the Dive
- 38 Dealer Service & Repair
- 39 Cleaning the Swivel Joint
- 40 Removal of the Swivel Joint
- 41 Warranty Information
- 41 Limited Lifetime Warranty
- 42 Restrictions
- 42 Returning Your Regulator For Service
- 43 Markings and Abbreviations
- 44 Notes
- 47 Regulator Service Record