Installation. Mitsubishi LCD1700V

INSTALLATION

To install the monitor to your host system, please follow the steps as given below:

Steps

1. Open the connector cover first.

2. And then open the cable cover.

3. Connect Video Cable a. Make sure both the monitor and computer are powered-OFF.

b. Connect the video cable to the computer first, then to the monitor.

4. Connect power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

5. Assemble the cable cover.

6. Cover the connector cover.

7. Power-ON Monitor and Computer

Power-ON the monitor first, then power-ON the computer.

This sequence is very important.

8. If the monitor still does not function properly, please refer to the trobleshooting section to diagnose the problem.

LCD1700V-E.PM6

PULL

Connector Cover

Cable Cover

(This semi-circle opening is the Cables outlet)

13 01.9.19, 6:03 PM