advertisement
Installation and connection
The Miele water protection system
The Miele water protection system protects the washing machine from water damage.
The system consists of three main components:
1) the inlet hose
2) the electronic unit and the washing machine housing
3) the drain hose
1) Inlet hose
The inlet hose can withstand pressure of more than 7,000 kPa.
2) Electronic unit and washing machine housing
– Sump
Any leaking water is collected in a sump in the base of the appliance. A float switches off the safety valves, preventing any more water flowing into the machine and water in the suds container is pumped away.
– Overflow protection
This prevents the washing machine taking in too much water. If the water level exceeds a certain level, the drain pump switches in and pumps the excess water away.
3) Drain hose
The drain hose is protected by a ventilation system which prevents the washing machine from being emptied completely.
51
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Disposal of the packing material
- 2 Disposal of your old appliance
- 9 Special programmes
- 9 / programmes
- 9 Water plus system
- 10 Future updates (PC)
- 11 Control panel
- 12 Important control panel features
- 12 Programme selector
- 12 Additional option buttons
- 12 "Spin" button with indicator lights
- 15 Brief instructions
- 16 Programme chart
- 20 Before washing
- 21 Selecting a programme
- 22 Additional options
- 24 At the end of a programme
- 25 Adding or removing laundry after a programme has started
- 26 Interrupting a programme
- 26 Altering a programme once selected
- 26 Skipping a programme stage
- 26 To cancel or select a different programme
- 27 Programme sequence
- 29 Water softeners
- 29 Washing with several components
- 30 Fabric conditioners and liquid starch
- 30 at the end of a programme
- 30 Adding fabric conditioner separately
- 30 Adding starch separately
- 30 Colour run and dye removers/dyes
- 31 E-Cloth
- 31 Extra cleaning
- 32 Cleaning the detergent dispenser drawer
- 33 Cleaning the fluff (drain) filter and pump
- 35 Cleaning the water inlet filters
- 35 To clean the filter in the union in the open end of the inlet hose
- 35 To clean the filter in the water inlet valve
- 36 The programme does not start
- 37 The wash programme stops and a fault indicator light comes on
- 39 General problems or an unsatisfactory wash result
- 41 The drum door does not open when you press the Door button
- 42 Opening the drum door in the event of a power failure
- 43 Customer contact
- 44 Front view
- 45 Rear view
- 46 Installation surface
- 46 Installing the washing machine
- 46 Removing the transit fittings
- 48 Re-fitting the transit bars
- 49 Levelling the machine
- 49 Screwing out and adjusting the feet
- 50 Building under a continuous worktop/in a kitchen run
- 50 Washer and Dryer stack
- 51 The Miele water protection system
- 52 Connection to the water supply
- 53 Connection to the drainage system
- 54 Electrical connection U.K
- 60 Water plus system
- 62 Gentle action
- 64 Memory function