4.1 Lead Wire Solderless Terminal. Shinko SE2EA-1-0-0, SExxA series

4. Wiring

Warning

Turn the power supply to the instrument off before wiring.

Working on or touching the terminal with the power switched on may result in severe injury or death due to Electric Shock.

4.1 Lead Wire Solderless Terminal

Use a solderless terminal with an insulation sleeve in which an M3 screw fits as follows.

For the sockets with finger-safe & screw fall prevention functions, the Ring terminals are incompatible.

The tightening torque should be 0.63N•m.

Solderless

Terminal

Y type

Ring type

Manufacturer

Nichifu Terminal Industries CO., LTD.

Nichifu Terminal Industries CO., LTD.

Model

TMEV1.25Y-3S

TMEV 1.25-3

Japan Solderless Terminal MFG CO., LTD. V1.25-3

(Scale: mm)

(Fig. 4.1-1)

- 13 -