Accessories. Zodiac G4


Add to my manuals
12 Pages

advertisement

Accessories. Zodiac G4 | Manualzz

1

ZODIAC ACCESSORIES

PART ILLUSTRATION PART NO.

1. W24000

DESCRIPTION

Ladder Guard

Always use on stainless steel in-pool ladders

2. W24100 Return Line Diverter

Use when no other return inlet directional fittings exist.

Retrofit Eyeball Return

Line Diverter

Use to replace standard directional inlet eyeballs.

3A

2

3B

3A. W90153

(for 11/2" return inlet)

3B. W90155

(for 2" return inlet)

4

4. W26705 The Leaf Catcher with 4 1 /

2

" Hose Connector

Use when heavy debris or leaf situations exist.

5. W83247 Additional 37g Hose Weight

May be required to properly balance the Zodiac cleaner head.

5

ZODIAC POOL CARE, INC.

2028 N.W. 25th Avenue

Pompano Beach, FL 33069

1-888-786-7797 www.zodiacpoolcare.com

ZODIAC G4 CARE AND MAINTENANCE

To maintain quality, performance and increase the lifespan of your Zodiac G4, please do the following:

1.

Thoroughly clean the skimmer basket, pump basket and pool filter on a regular basis. Always disconnect the hose from the skimmer before backwashing.

2. REMOVE THE CLEANER BEFORE SUPER CHLORINATING OR ADDING POOL CHEMICALS. Reinstall the Zodiac

G4 when the imbalance is corrected or after a minimum of 4 hours from super chlorination. Chemical damage is not covered under warranty.

laying it on a warm pool deck for several hours.

3.

NEVER COIL THE HOSE when the cleaner is removed from the pool. A coiled hose can be straightened with hot water or by X

INCORRECT CORRECT

4. Periodically inspect parts for wear. The footpad and disc are the most critical. When the depth of the channels between the treads of the footpad are 1/8" or less, replace the footpad.

Quick Access Cassette System

Foreign objects, such as children’s toys, tree branches and rocks, should be removed manually from your pool prior to operating your

Zodiac G4. If a blockage should occur, the Quick Access Cassette System will allow you to check the diaphragm for damage and remove the blockage in minutes at poolside.

DIAPHRAGM REMOVAL

Unscrew cassette (Step 1) and remove from head (Step 2). Loosen swivel pipe (Step 3). Pull out diaphragm & inner pipe (Step 4). Pull diaphragm from inner pipe (Step 5) and inspect for blockage or cuts. Remove blockage and rinse. Do not use sharp objects as damage to diaphragm may occur. If replacement parts are needed, contact technical service at 1-888-786-7797 for an authorized warranty station.

Step 1 Step 2 Step 3 Step 4 Step 5

DIAPHRAGM ASSEMBLY

Prior to reinstalling the diaphragm, rinse the diaphragm and the inner extension pipe thoroughly to remove any grit or algae. Be sure the retaining ring is on the diaphragm, then push diaphragm onto inner pipe (Step 6). Insert inner pipe into diaphragm chamber and seat diaphragm against lip (Step 7). Tighten cassette assembly (Step 8). Insert cassette into head (Step 9) and tighten handnut (Step 10).

Step 6 Step 7 Step 8 Step 9 Step 10

REPLACING THE FOOT PAD

Unthread and remove the cassette (Steps 1 & 2). Holding the Zodiac G4 as shown (Step 3), lift the clip while pulling the foot flange toward you. Pull off the old footpad and stretch on the new one. Line up both sides of the foot flange with the grooves of the opening, and push forward to lock into place (Step 4). Insert the cassette and tighten (Step 5).

Step 1 Step 2 Step 3 Step 4 Step 5

18

19

20

21

22

23

24

25

26

ZODIAC G4 PARTS DIAGRAM

4

9

10

3

11

2

5

8

1

6

7

15

17

14

16

12

13

PART NO.

DESCRIPTION

1.

W83262 Hull

2.

W83261 Sail

3.

W83268 Buoy

4.

W83264 Cleat

5.

W83325 G4 Cassette Assembly Complete

6.

W69698 Long Life Diaphragm

7.

W81600 Retaining Ring

8.

W56525 Inner Ext. Pipe - Natural

9.

W83276 Cassette Chambers Upper and Lower

10.

W74000 Compression Ring

11.

W83271 Cassette Outer Extension Pipe

12.

W83265 Fender - Left

13.

W83266 Fender - Right

14.

W83360 Fairing with Rudder

15.

W83263 Foot Flange

16.

W83275 Foot Pad

17.

W83277 Dual Durometer Disc

18.

W60050 FlowKeeper Valve

19.

W33160 4 1/2" Connector - Aqua

20.

W44800 Pool Pulse ®

21.

W91046 45º Elbow

22.

W63900 Inground Valve Cuff

23.

W33800 Hose Protector

24.

W83247 Hose Weight

25.

W83140 Long-Life Hose Kit - 12x1 Meter

26.

W83278 Wheel Deflector (Optional Accessory)

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

QTY.

1

1

1

ZODIAC POOL CARE, INC.

2028 N.W. 25th Avenue

Pompano Beach, FL 33069

1-888-786-7797 www.zodiacpoolcare.com

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Frequently Answers and Questions

What is the warranty period for the Zodiac G4 pool cleaner?
The Zodiac G4 pool cleaner comes with a 2-year limited warranty.
What should I do prior to installing the Zodiac G4?
Before installing the Zodiac G4, you should complete and return the warranty card, record your purchase information, and attach your invoice to the designated page in the owner's manual.
What is the purpose of the FlowKeeper™ Valve?
The FlowKeeper™ Valve helps to regulate the water flow to the cleaner, ensuring optimal cleaning performance.
How many hose lengths are included with the Zodiac G4?
There are 12 hose lengths included with the Zodiac G4.
What is the recommended water flow rate for the Zodiac G4?
The recommended water flow rate for the Zodiac G4 is between 14 to 19 gallons per minute.
How can I remove air from the hose of the Zodiac G4?
To remove air from the hose, you can either submerge the hose in water and squeeze out the air, or use a hose clamp to create a tight seal and then turn on the pump to force the air out.
What is the purpose of the 45 Degree Elbows?
The 45 Degree Elbows are used to connect the hose sections and allow for flexibility in positioning the cleaner.
What is the function of the Pool Pulse™?
The Pool Pulse™ feature helps to improve the cleaner's maneuverability and coverage by creating a pulsing motion.

advertisement