Installing SD Memory Card. Vivitar VIVICAM 5015, 5015

Note:

1. If you don

’t intend to use your camera for an extended period of time, please remove the batteries to avoid battery leakage and corrosion.

2. Please don

’t remove the batteries or power off your camera before downloading the test photos or videos when you have not inserted an SD card. The test images will be lost forever if they are not downloaded before the camera is shut down or powered off.

3. Do not mix old and new batteries.

4. We recommend you use Alkaline batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium metal hydride) batteries.

5. In order to conserve battery power if the camera is on but not in use for 60 seconds it will automatically shut off.

Installing SD Memory Card

Your camera has a memory card slot that enables you to insert any

“SD” compatible memory card. Adding a memory card will allow you to increase the capacity of your camera before you have to transfer photos and videos to your PC. Install the SD memory card as below:

1. Locate the Memory Card slot.

2. Insert the Memory card into the slot in the correct direction. (see the sketch below)

6

3. Push the card in until you feel it

“click” into position. The top of the card should be flushed with the surface of the camera. An icon will appear on the LCD screen after you turn on your camera.

4. Once the external memory card is inserted into the camera all the images taken with the camera will be stored on the card.

Note:

1. An external memory card is required for normal use. Your camera supports any compatible SD memory card (up to 8GB).

2.

“Card inserted, change to card” will appear on the LCD screen when you insert the card, indicating that photos and videos will now be stored on the SD memory card. Reversely, “Card removed, change to internal memory

” will appear on the LCD screen when you remove the card.

7